Jump to content

Updates


Recommended Posts

http://aerosoft-shop...php?language=en Gon to here register your F16 then pick the update 1.21 all.

Hope this helps Jerry

Well don't I feel stupid? I was logged in to the support webpage and saw the whole list of products, but just couldn't find that one little link to register a new product. Thanks.

Link to comment
Share on other sites

Well don't I feel stupid? I was logged in to the support webpage and saw the whole list of products, but just couldn't find that one little link to register a new product. Thanks.

Well I registered and still no link to update. I must be doing something wrong. If you can find the update let me know. I emailed support so will have to wait until next week for a reply.

Link to comment
Share on other sites

Well I registered and still no link to update. I must be doing something wrong. If you can find the update let me know. I emailed support so will have to wait until next week for a reply.

Well I found it. Sorry for all the emails.

Link to comment
Share on other sites

  • Aerosoft

Hello all i am new too this forum thing. so im sorry for the inconvenience, my question is the same as the origanil post. ive purchased the F16 and one other programe at the same time. registered both at the same time. got the the updates yeasterday. ad they all do the same thing. Tell me that my Email/or Sierial # is wrong. been watch the posts and im a little confused. are there now new versions of the updates to install. or am i just lost?

Thanks for any help NEW GUY too this

Welcome to the forums!

Just download the updates again, the problem has been solved in the new one.

  • Upvote 1
Link to comment
Share on other sites

Hello Mr. Mathijs. Thank you for your replie, Yes i did redownload and all worked. makes for a very nice addon to my FS aircraft. I thank you and all at aerosoft for the good work. Very nice job. Both on this the F16 and the Seahawk/Jayhawk. Both are well done. I hope to do more buisness with you again here soon.

Thanks again Jerry

Link to comment
Share on other sites

Thanks for this update, just what this plane needed. Now that we've got Bitching Betty, how can we turn her off? :lol: She can be annoying some times... If I'm correct there's a switch on the Audio 1 panel for that. In FSX most of the Audio 1 switches are inop so perhaps one of those can be used for that?

Link to comment
Share on other sites

I think it is safe to say that no additional buttons or switches will be added - sorry !

Doing that would require new VC model files for all versions.

The work to do that is total out of proportion for adding just one switch.

I don´t hope that Bitchin Betty yells at You constantly, cause that would indicate that You either is flying towards the ground or have massive system cautions all the time. ;)

Finn

Link to comment
Share on other sites

I think it is safe to say that no additional buttons or switches will be added - sorry !

Doing that would require new VC model files for all versions.

The work to do that is total out of proportion for adding just one switch.

I don´t hope that Bitchin Betty yells at You constantly, cause that would indicate that You either is flying towards the ground or have massive system cautions all the time. ;)

Finn

well, when flying a demo display it's a bit annoying but overall with normal flying I'm glad Betty is making a bit of noise once in a while :lol:

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

I have just uploaded two new updates. If you were fully up to date you are now running version 1.20.

AS_F16-Fighting-Falcon_UPD_ALL_to_121.exe this one will update all existing versions to the latest 1.21 versions

AS_F16-Fighting-Falcon_UPD_120_to_121.exe this one only contains the 1.20 to 1.21 changes *duh

It all was pretty complex but I think all should be well now. Do take care that both updates overwrite the aircraft.cfg files so it you have additional liveries or other mods installed you save your aircraft.cfg files!

As always the updates are in the FAQ's / Updates section. Don't use these updates on pirated copies, could end badly.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-

Aerosoft FALCON X 1.21 ReadMe.

October 27, 2009

This text holds the information we gathered after the manual was created.

IMPORTANT INFORMATION:

- For all support, come to our forum: http://www.forum.aerosoft.com/

---------------------------------------

HISTORY

1.00 Release

1.01 Temporary update

1.10 Service Pack 1

Fixed CTD on FSX SP2 systems

Fixed wrong MFD's and HUD gauges

Fixed Engine smoke on all combat versions etc.

Fixed Demo smoke on KLU-Demo, BAF-Demo and Thunderbird

Fixed asymetric loadout

Fixed fuel system

Fixed Speedbrake

Fixed Com radio

Fixed taillight on various versions

Fixed speedbrake indicator

Fixed red light for gear handle

Fixed sound for Canopy open / close reversed

Fixed Stdby HSI heading bug and RMI triangle

Fixed trims set to neutral after Autopilot disengagement

Fixed Autopilot

Fixed engine smoke with afterburner engaged

Fixed stupid tooltips

Changed VC Cameraview for Left Aux panel (COM radio)

Changed eyepoint to coincide with centerline

Changed AA HUD to show better information on range to locked target

Added aircraft panel state configuration utility

Added inflight refueling

Added Portugese F-16's

Added Shockwave gauge line in panel.cfg's

Added Shockwave redux light section

Added two missions (the Airforce one repaint is used with permission of the creator, Damien Oxier)

1.11 Finalizing a few open issues (with thanks to Finn)

Added automatically activated Pitot Heat (as it should)

Added Start-up configurator (now always shows on all models when they are loaded)

Fixed textures for the Shaw 20FW version

Fixed tailights for all of the F-16C 120-9-12-370-184-28 models

Fixed escort mission for SP2 users

1.20 Refined flightmodels, now includes the more powerfull GE110 engine for all F-16C models

Updated various textures done by Dag

Updated AI models

1.21 Added sound to all switches/controls etc

Added Bitching Betty

Link to comment
Share on other sites

I am trying to find the up date (AS_F16-Fighting-Falcon_UPD_ALL_to_121.exe) you mentioned and logged in to the site. There are no places that list the f16 fighting falcon in the FAQs to download this. I like your program and want to reload it on my new computer. Thanks if you could give me some help with this.

Tom

Link to comment
Share on other sites

  • 4 weeks later...

Tom,

Have you been able to find the 1.21 update yet? If you click on "FAQ/Updates" on the Aerosoft website (or go here: http://aerosoft-shop.com/support.php ) and log in with the e-mail address you bought the F-16 with, it should appear in the "Products:" dropdown list. After selecting the F-16 and clicking "Continue", I see the following options:

-> F-16 Fighting Falcon Paintkit

-> Update 1.20 to 1.21

-> Update all versions to 1.21

Clicking on the last one gives me a link to download the AS_F16-Fighting-Falcon_UPD_ALL_to_121.exe file you're talking about. Do you see all of that after logging in?

Marcus

  • Upvote 1
Link to comment
Share on other sites

  • 3 weeks later...

When I click on the product list dropdown, there is no F-16 listings of any sort. How do I find the downloads. I know it must seem like I'm an idiot or something, but this isn't my first rodeo. Maybe I'm just getting too old for this stuff. :D

Link to comment
Share on other sites

I have version 1.1 according to the download disk. I downloaded the patch and I still have a problem. The UHF Coms panel will not allow me to set the frequency. One digit rotates between 8 & 9 so it will not allow a different number to be chosen. It is impossible to dial in a frequency on either com 1 or com 2. Suggestions

And, the left MFD will not allow me to return to return to the "map" once I make another selection.

Because of these to issues I have not even tried to do more of the performance that this sim should do.

I appreciate your assistance.

Link to comment
Share on other sites

  • 4 months later...

well I have spent about 2 hours going around in circles trying to find where I download this update, I went to the shop & re registered my boxed set, it seems it doesn't matter which area I go on the different parts of the forums I never get to the point where I can download it. thanks for any replys.

Link to comment
Share on other sites

well I have spent about 2 hours going around in circles trying to find where I download this update, I went to the shop & re registered my boxed set, it seems it doesn't matter which area I go on the different parts of the forums I never get to the point where I can download it. thanks for any replys.

http://aerosoft-shop...php?language=en under "Support / Service">"FAQs / Updates"

This is the third time I've had to direct someone to the updates part of the site :wacko:

Link to comment
Share on other sites

sorry I have only just joined this site ,so I don't know my way around it yet , but thanks.I have now gone back to the shop login & registered again & this time the upate I was after popped up, thanks.

Link to comment
Share on other sites

  • 3 weeks later...

Hi

I need the: AS_F16-Fighting-Falcon_UPD_ALL_to_121.exe but I can't click on the link, can send anybody me a link that does work.

Thank you.

Link to comment
Share on other sites

  • 5 months later...
  • 10 months later...

Hello,

I've downloaded the update yesterday (all to 1.21). After I've installed it, I wasn't able to choose the F-16's anymore in my "select aircraft" screen.

When I checked my "Simobject/Aircraft map", I saw that all the models of the F16's are right there.

I tried to repair my F16pack with the CD and then instal the update again but it doesn't work either. Does somebody know how to solve this?

P.S. When I check my missions screen, there are two F16 missions and I can play them!

Link to comment
Share on other sites

Hello,

I've downloaded the update yesterday (all to 1.21). After I've installed it, I wasn't able to choose the F-16's anymore in my "select aircraft" screen.

When I checked my "Simobject/Aircraft map", I saw that all the models of the F16's are right there.

I tried to repair my F16pack with the CD and then instal the update again but it doesn't work either. Does somebody know how to solve this?

P.S. When I check my missions screen, there are two F16 missions and I can play them!

Which version was the CD when you installed it initially.

I would suggest you un-install the Falcon and then delete any remaining folders, then re-install the CD and check the version number.

If using Windows Vista/7 then run the installer by rightr clicking on the installer Icon and selecting, "Run as Administrator".

Link to comment
Share on other sites

  • 3 months later...

Hi have purchased the version boxed of F16 version 1.11 where I can download the last patch ( I think 1,21) ?

bye

ps: this my readme:

Aerosoft FALCON X 1.11 ReadMe.

Sunday, December 1st, 2008

This text holds the information we gathered after the manual was created.

IMPORTANT INFORMATION:

- For all support, come to our forum: http://www.forum.aerosoft.com/

---------------------------------------

HISTORY

1.00 Release

1.01 Temporary update

1.10 Service Pack 1

Fixed CTD on FSX SP2 systems

Fixed wrong MFD's and HUD gauges

Fixed Engine smoke on all combat versions etc.

Fixed Demo smoke on KLU-Demo, BAF-Demo and Thunderbird

Fixed asymetric loadout

Fixed fuel system

Fixed Speedbrake

Fixed Com radio

Fixed taillight on various versions

Fixed speedbrake indicator

Fixed red light for gear handle

Fixed sound for Canopy open / close reversed

Fixed Stdby HSI heading bug and RMI triangle

Fixed trims set to neutral after Autopilot disengagement

Fixed Autopilot

Fixed engine smoke with afterburner engaged

Fixed stupid tooltips

Changed VC Cameraview for Left Aux panel (COM radio)

Changed eyepoint to coincide with centerline

Changed AA HUD to show better information on range to locked target

Added aircraft panel state configuration utility

Added inflight refueling

Added Portugese F-16's

Added Shockwave gauge line in panel.cfg's

Added Shockwave redux light section

Added two missions (the Airforce one repaint is used with permission of the creator, Damien Oxier)

1.11 Finalizing a few open issues (with thanks to Finn)

Added automatically activated Pitot Heat (as it should)

Added Start-up configurator (now always shows on all models when they are loaded)

Fixed textures for the Shaw 20FW version

Fixed tailights for all of the F-16C 120-9-12-370-184-28 models

Fixed escort mission for SP2 users

---------------------------------------

KNOWN LIMITATIONS/BUGS:

- Due to some unknown reason, the last two digits on the COM radio, in some rare occations, goes blank.When this happens, simply keep dialing the last knob until it shows 00 (Zero zero) again.

- During Aerial refueling, fuel is added 25% for each 20 sec and does NOT happen gradually. This is due to a FSX limitation.

- Landing lights are not possible due to the structure of the HUD we used. As the HUD is far nmore important we decided to accept this limitation.

---------------------------------------

TIPS:

---------------------------------------

FREE ACROBAT READER

The manual for the download version is created in Adobe Acrobat format. You can always get the latest version from: www.adobe.com/products/acrobat/readstep2.html

Copyright © 2008 Aerosoft gmbh All Rights Reserved. Microsoft, Windows (XP/Vista) are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other Countries. Adobe and Acrobat are trademarks of Adobe Systems Incorporated. All trademarks and brand names are trademarks or registered trademarks of the respective owners.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use