Richard64 0 Posted June 12, 2008 Share Posted June 12, 2008 Hi all, at last I've got into the forum.I have been trying for some time now to get CumulusX to run and I have a singular lack of success.I have followed the instructions implicitly.I am mow getting the following message.CumulusX.exe - Application ErrorApplication has generated an exception that could not be handled.Process ID = 0 x 76c (1900), Thread ID 0 x 590 (1424)Click ok to terminate the applicationClick cancel to debug the applicationI really want to get this programme up and running so any help and I would be obliged.RegardsRichard Link to comment Share on other sites More sharing options...
sf4JC 1 Posted June 12, 2008 Share Posted June 12, 2008 Hello Richard, and Welcome to SOAR! I don't know anything about the inner workings of CumulusX!, but I do remember a person needs FSX/SP2 installed I think. So check that first, and maybe reinstall it, I'm not sure. Peter, the creator of the CumulusX!, will most likely be by to answer your question before the end of the day today or tomarrow. I know he is very friendly and welcoming when it comes to questions about his program.Scott Link to comment Share on other sites More sharing options...
sf4JC 1 Posted June 12, 2008 Share Posted June 12, 2008 Oh man, hey Richard, I forgot to mention that if reinstalling SP2, or even installing for the first time, I think there was special instructions at www.fsinsider.com on what files are rewritten (one is something like Awards or Rewards.something, if you are concerned or want to save Awards/Rewards). Someone can correct me if I am wrong, or maybe I'll check real quick if I have time.sf4JCEDIT: After looking just a bit, this is just a bit of what I found...Two files to consider saving:Logbook.bin &GrantedRewards.bin Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 12, 2008 Author Share Posted June 12, 2008 Oh man, hey Richard, I forgot to mention that if reinstalling SP2, or even installing for the first time, I think there was special instructions at www.fsinsider.com on what files are rewritten (one is something like Awards or Rewards.something, if you are concerned or want to save Awards/Rewards). Someone can correct me if I am wrong, or maybe I'll check real quick if I have time.sf4JCEDIT: After looking just a bit, this is just a bit of what I found...Two files to consider saving:Logbook.bin &GrantedRewards.bin Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 12, 2008 Author Share Posted June 12, 2008 Hi thanks for the reply.I know I have everything installed as it shold be.FSX De Luxe SP2 2.0 netframe etc.In fact I have just done a complete reinstall of FSX and SP1 and SP2 [this time via Acceleration] and it still will not run giving the same message.Think its time to give up.But thanks.Richard Link to comment Share on other sites More sharing options...
Peter Lürkens 30 Posted June 12, 2008 Share Posted June 12, 2008 Hi Richard,I'm afraid that SP2-Acceleration may not work because the included DLL-library has a different version then the one from SP2. Navigate to the folder indicated below and check, if there is the highlighted directory with a simconnect.dll 10.0.61636.0 in it. The version code of the folder is different, it is 10.0.61259.0.If not, just install FSX SP2, and afterwards do a "repair-install" of FSX-Acceleration.good luck,Peter Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 12, 2008 Author Share Posted June 12, 2008 Hi Richard,I'm afraid that SP2-Acceleration may not work because the included DLL-library has a different version then the one from SP2. Navigate to the folder indicated below and check, if there is the highlighted directory with a simconnect.dll 10.0.61636.0 in it. The version code of the folder is different, it is 10.0.61259.0.If not, just install FSX SP2, and afterwards do a "repair-install" of FSX-Acceleration.good luck,Peter Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 12, 2008 Author Share Posted June 12, 2008 Hello Peter, my simconnect entries are exactly as yours.Richard Link to comment Share on other sites More sharing options...
Peter Lürkens 30 Posted June 13, 2008 Share Posted June 13, 2008 Hi Richard,maybe I should not do this, but you may try to install the attached simconnect package. Somewhere I read, that in few cases the registration of the simconnect.dll fails during installation of FSX or one of the SP's.I think you mentioned it, just for comfirmation: You have also installed dotnet framework 2.0?best regards,PeterSimConnect.zip Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 14, 2008 Author Share Posted June 14, 2008 Hi Richard,maybe I should not do this, but you may try to install the attached simconnect package. Somewhere I read, that in few cases the registration of the simconnect.dll fails during installation of FSX or one of the SP's.I think you mentioned it, just for comfirmation: You have also installed dotnet framework 2.0?best regards,PeterHi Peter, yes definately got .dotnet 2 installed.I had to do a reinstall of FSX recently and tried every combination of adding SP1/2 and Acceleration to if it made any difference and no it didn't.However it did work once a few weeks ago. But when I started again the following day it would not start and hasn't since.I have re downloaded the programme as well. No joy.Before I install this simconnect tell me where it goes or is it an automatic install to the correct place..I have my OS on C and FSX on E with scenery addons on F. They all work fine.Richard Link to comment Share on other sites More sharing options...
Peter Lürkens 30 Posted June 14, 2008 Share Posted June 14, 2008 There is no destination, it will go to WinSxS-directory, normally. If anything went wrong with your simconnect library, then this should fix it.Do you remember, if you changed something else from the one day to the other? Could you try to re-installing dotnet 2.0 as well? Eventually you might also go to the registry (make a backup before) to "HKEY_CURRENT_USER\Software\Peter Lürkens" and delete the branch "CumulusX", in case something got corrupted there.best regards,Peter Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 14, 2008 Author Share Posted June 14, 2008 There is no destination, it will go to WinSxS-directory, normally. If anything went wrong with your simconnect library, then this should fix it.Do you remember, if you changed something else from the one day to the other? Could you try to re-installing dotnet 2.0 as well? Eventually you might also go to the registry (make a backup before) to "HKEY_CURRENT_USER\Software\Peter Lürkens" and delete the branch "CumulusX", in case something got corrupted there.best regards,PeterOK Peter thanks, I am going to try now.I have read somewhere else about the registry entry, but I'm not sure how to get there [actually I can't remember] please give me a path.LATER. Sorry Peter, no good still getting the dreaded CumulusX has encountered a problem and needs to close etc.RegardsRichard Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 15, 2008 Author Share Posted June 15, 2008 OK Peter thanks, I am going to try now.I have read somewhere else about the registry entry, but I'm not sure how to get there [actually I can't remember] please give me a path.LATER. Sorry Peter, no good still getting the dreaded CumulusX has encountered a problem and needs to close etc.Sunday Morning,Peter, SUCCESS. I deleted the reg entry and now CX is working fine, so obviously that was the problem.Thanks everyone for your helpRegardsRichardRegardsRichard Link to comment Share on other sites More sharing options...
sf4JC 1 Posted June 15, 2008 Share Posted June 15, 2008 Good to hear Richard! Hope you can now relax and enjoy CumulusX!. Although, sometimes I find myself unrelaxed, trying to SHORTEN the distance between 2 ridges.sf4JC Link to comment Share on other sites More sharing options...
Peter Lürkens 30 Posted June 16, 2008 Share Posted June 16, 2008 Hi Richard,glad to here that it worked finally. Had you looked into it before deleting and found something suspicious? I would try to replay the bug.best regards,PeterHi Scott,our news is full about your desastrous flood. Link to comment Share on other sites More sharing options...
sf4JC 1 Posted June 16, 2008 Share Posted June 16, 2008 Hi Scott,our news is full about your desastrous flood.Wow, all the way over there? We are blessed to have a house right at the top of an incline. But we started worrying when our neihbors started complaining about their sewage backups, which I guess had been happening all over in lower spots where the flood waters didn't even flow.sf4JC Link to comment Share on other sites More sharing options...
Richard64 0 Posted June 16, 2008 Author Share Posted June 16, 2008 Hi Peter. no I didn't look into it at all. I just deleted the entry and ran CX again and it was fine.Richard Link to comment Share on other sites More sharing options...
highflyer_merged 0 Posted July 3, 2008 Share Posted July 3, 2008 having big problems too where is this regestry and how do I delete it High flyer Link to comment Share on other sites More sharing options...
Richard64 0 Posted July 5, 2008 Author Share Posted July 5, 2008 Hi there, do the the following.Go to - Start - Run and type in regedit.exe and click ok [this will take you to the registry]Then on the left you will see a menu and look for the following - HKEY_CURRENT_USERClick on the + to expand the file.Then look for - software and click on the + to expand that.Then search down and look for Peter Lurkens.Click on the + to expand that and you will see Cumulus XAt this point right click on cumulus X and delete the entry.Then run CX again and hopefully all will be well.Richard Link to comment Share on other sites More sharing options...
highflyer_merged 0 Posted July 5, 2008 Share Posted July 5, 2008 Hi there, do the the following.Go to - Start - Run and type in regedit.exe and click ok [this will take you to the registry]Then on the left you will see a menu and look for the following - HKEY_CURRENT_USERClick on the + to expand the file.Then look for - software and click on the + to expand that.Then search down and look for Peter Lurkens.Click on the + to expand that and you will see Cumulus XAt this point right click on cumulus X and delete the entry.Then run CX again and hopefully all will be well.Richard Thanks for that Richard did as you asked and Peter Lurkens is not there that only leads me to think that it has not installed for some reason is that right???????????? Link to comment Share on other sites More sharing options...
Richard64 0 Posted July 5, 2008 Author Share Posted July 5, 2008 Yes I would assume that if Peter Lurkens is not there you have not installed it correctly.I know in the instructions it says to extract to FSX but I did thisextact to somewhere [i used the same folder I downloaded CX to] and then copy and paste the various bits to FSX.Also in this same folder I have kept back ups as per the instructions.PS. If you are looking for a winch launch glider for FSX then within this site go to Downloads/Aircraft/FS2K4 , scoll down until you come to the Schlelcher ASW28 for FS2004. This glider works just as well in FSX and in fact is the only one I am using at the moment.Richard Link to comment Share on other sites More sharing options...
Recommended Posts