limp 29 Posted June 18, 2009 Share Posted June 18, 2009 I'll try updating then taxxing a bit with my E-Jet see if I can find the spot again Link to comment Share on other sites More sharing options...
limp 29 Posted June 18, 2009 Share Posted June 18, 2009 Ok, I double checked, I have version 1.10, AES works fine I found a first crash site... Coordinates : LAT N49° 0.74' LON : E2° 33.07' ALT : 398.2 ftscreenshot here : Link to comment Share on other sites More sharing options...
limp 29 Posted June 18, 2009 Share Posted June 18, 2009 Ok and I managed to find the spot were I crashed the E-jet... Very close to the crash site above...N 049° 0,56'E2° 33.02' Link to comment Share on other sites More sharing options...
Singletracker 0 Posted June 19, 2009 Author Share Posted June 19, 2009 Hi ShaunAlright I have had some time to investigate the collisions these are the areas (in Cyan) where i get a crash. I crashed it about 20 meter intervals along these taxiways so they are pretty accurate within the time available. I have only investigated Terminal 1 and the other report on taxiway N near the concord.General OverviewTerminal 1 the main area is INNER and the two Areas on Taxiway ATaxway N near the ConcordeHope this helps.Also in the image note the lack of AI at Terminal 1 compared to terminal 2? I think the collisions or taxi links around Terminal 1 prevent ai from using it fully? see ny other post. Some AI do use it but I feel it depends on the parking spot they are allocated? just guessing here though. looking forward to a fix.CheersMattBTW I'm using the updated V 1.10 Link to comment Share on other sites More sharing options...
cbd80 258 Posted June 20, 2009 Share Posted June 20, 2009 Hi,I have also found issues with crashes with this scenery.Upon loading at gate T4 or T3 I get an instant crash with a 757.I have also found a crash on the junction of TWY A and NA1/NA2.I'm on the latest version. Hopefully these issues can be sorted soon as it's a great scenery! Link to comment Share on other sites More sharing options...
cbd80 258 Posted June 30, 2009 Share Posted June 30, 2009 Hi Shaun,Could you please confirm that the developers are aware of these issues and that a fix is being worked on?Thanks,Chris Link to comment Share on other sites More sharing options...
limp 29 Posted June 30, 2009 Share Posted June 30, 2009 Would be nice to have some news... Link to comment Share on other sites More sharing options...
wedge 5 Posted July 10, 2009 Share Posted July 10, 2009 any news? It is quite a problem that we can't use fully this airport as you may meet any kind of invisible walls that just destroy any flight you may try to do, in both ways depending on the gates which you can reach without meeting them or not. Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted July 11, 2009 Share Posted July 11, 2009 Hello Folks, Until the situation is resolved you may want to turn crash detect off. Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted July 15, 2009 Share Posted July 15, 2009 Hello Folks, Need you now to act as Guinea Pigs for me and test the fixes. I have attached a file and you need to download it. All files go to the CDG_SC/scenery directory. The first patch (introducing the new constructions site and Tower near Terminal 2G) is mandatory before installing this patch. So please make sure that you have the V1.10 update installed prior to adding these files. So unzip the download file and place all the files in the scenery folder into the following folder and allow to overwrite. *:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\Mega Airport Paris CDG SC\scenery Can you please let me then know if you have any issues regarding crashes after installing these files.. CDGfsxnocrash.zip Link to comment Share on other sites More sharing options...
cbd80 258 Posted July 15, 2009 Share Posted July 15, 2009 Hi Shaun, so far so good . I've tested the areas I've reported and they appear fine. I've also had a general joyride around the airport and haven't had any issues so far. I'll try and get a few flights in at CDG over the next few days. Excellent stuff, Thanks! Link to comment Share on other sites More sharing options...
aaphebus 13 Posted July 17, 2009 Share Posted July 17, 2009 Hello Shaun Thanks for this fix, I will test and report here as soon as possible (maybe this evening or tomorrow), but I have some hope since it does the job for Cdb80 Alain Link to comment Share on other sites More sharing options...
aaphebus 13 Posted July 17, 2009 Share Posted July 17, 2009 Hello again Shaun Tested and approved... The fix do the job for me too. I'm glad you made it. Thanks a lot to all Aerosoft team and developpers. Alain Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted July 18, 2009 Share Posted July 18, 2009 Hello Folks, Great news, I'll get send the files to the our installer guy first thing Monday and hopefully they'll be incorporated into a new installer fairly soon. Link to comment Share on other sites More sharing options...
limp 29 Posted July 21, 2009 Share Posted July 21, 2009 Will be testing them as well Thanks... Link to comment Share on other sites More sharing options...
lucatrader 1 Posted December 13, 2011 Share Posted December 13, 2011 Hello Folks, Need you now to act as Guinea Pigs for me and test the fixes. I have attached a file and you need to download it. All files go to the CDG_SC/scenery directory. The first patch (introducing the new constructions site and Tower near Terminal 2G) is mandatory before installing this patch. So please make sure that you have the V1.10 update installed prior to adding these files. So unzip the download file and place all the files in the scenery folder into the following folder and allow to overwrite. *:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\Mega Airport Paris CDG SC\scenery Can you please let me then know if you have any issues regarding crashes after installing these files.. Hello Folks, Need you now to act as Guinea Pigs for me and test the fixes. I have attached a file and you need to download it. All files go to the CDG_SC/scenery directory. The first patch (introducing the new constructions site and Tower near Terminal 2G) is mandatory before installing this patch. So please make sure that you have the V1.10 update installed prior to adding these files. So unzip the download file and place all the files in the scenery folder into the following folder and allow to overwrite. *:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Aerosoft\Mega Airport Paris CDG SC\scenery Can you please let me then know if you have any issues regarding crashes after installing these files.. hallo, where can I get the patch? Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted December 14, 2011 Share Posted December 14, 2011 Hello Lucatrader, Its attached to the post. Link to comment Share on other sites More sharing options...
cbd80 258 Posted December 14, 2011 Share Posted December 14, 2011 Also, if I recall correctly the files have now been included in the product update, in the Updates section. Chris Link to comment Share on other sites More sharing options...
lucatrader 1 Posted February 25, 2012 Share Posted February 25, 2012 wow, now i'm enyoing that stunning airport after such update! I have the old box version, does it work for both fs9 and fsx? Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted February 27, 2012 Share Posted February 27, 2012 wow, now i'm enyoing that stunning airport after such update! I have the old box version, does it work for both fs9 and fsx? Nothing stopping you trying, just back up any files it might overwrite if not sure then just copy the whole scenery folder elsewhere so you can replace the lot. Link to comment Share on other sites More sharing options...
Recommended Posts