Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 2, 2008 Aerosoft Share Posted December 2, 2008 The Bush Hawk XP, probably our most versatile aircraft at this moment, caused some some frame rate problems for some users. This was most of all caused by the extensive details and the special features (like the adjustable lighting of the VC) but there was some additional optimization that could be done. In this extensive update the models have been made a bit easier on the hardware and also offers a low(er) polygon model. You'll find the update on the FAQ/Support pages. we found on YouTube! Link to comment Share on other sites More sharing options...
Buzz313th 2 Posted December 2, 2008 Share Posted December 2, 2008 Thanks guys.. given it a try...JB Link to comment Share on other sites More sharing options...
etien 16 Posted December 2, 2008 Share Posted December 2, 2008 If we buy the plane now do we get the version 1.1 or still need to update Link to comment Share on other sites More sharing options...
horst18519 231 Posted December 2, 2008 Share Posted December 2, 2008 This update is a performance patch. It is for those only who want better frame rates or less texture sizes.So you still buy the 1.00 Bush Hawk and can - if you want - download the 1.10 patch afterwards.It comes with a configuration setup that allows you to control which performance changes you want to do. Link to comment Share on other sites More sharing options...
THibben 0 Posted December 3, 2008 Share Posted December 3, 2008 Downlopaded the 1.10 version but it won't instl. Keeps saying I need to install the original BushHawk which is already installed.I did do a repair just to make sure there wasn't anything wrong. I was wondering if it is looking for the instl on the C: drive. I have my FSX on the E: driveThanks,Tom Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 3, 2008 Author Aerosoft Share Posted December 3, 2008 Downlopaded the 1.10 version but it won't instl. Keeps saying I need to install the original BushHawk which is already installed.I did do a repair just to make sure there wasn't anything wrong. I was wondering if it is looking for the instl on the C: drive. I have my FSX on the E: driveThanks,TomTom I would install the 1.00 version again and then the 1.10 update, that should solve the problem. Link to comment Share on other sites More sharing options...
Root Admin A. Muegge 57 Posted December 3, 2008 Root Admin Share Posted December 3, 2008 Hi,the perfomance updates required the installation of Bush Hawk V1.00How to check this.START | run | "regedit"and check this...HKEY_LOCAL_MACHINE\SOFTWARE\Aerosoft\Bush Hawk XPVersion = 1.00FSX_Path = You path to the FSX Link to comment Share on other sites More sharing options...
Kiwikat 2 Posted December 3, 2008 Share Posted December 3, 2008 I appreciate the work you and your team have put into this plane and patch, but unfortunately, the patch is making zero difference on my system. Other more complex aircraft are still getting much higher FPS.With that, I'm giving up. Sorry for any problems I may have caused in the past. Link to comment Share on other sites More sharing options...
THibben 0 Posted December 3, 2008 Share Posted December 3, 2008 Hi,the perfomance updates required the installation of Bush Hawk V1.00How to check this.START | run | "regedit"and check this...HKEY_LOCAL_MACHINE\SOFTWARE\Aerosoft\Bush Hawk XPVersion = 1.00FSX_Path = You path to the FSXI reinstalled and it still wouldn't install the 1.10 update.I did a regedit and the information is not in the location mentioned above. It is in HKEY_Local_Machine\SOFTWARE\Wow6432Node\Aerosoft\Bushawk XP.I am using Vista 64 which may be making the difference.Tom Link to comment Share on other sites More sharing options...
horst18519 231 Posted December 3, 2008 Share Posted December 3, 2008 Could you please copy+paste the entry in "HKEY_Local_Machine\SOFTWARE\Wow6432Node\Aerosoft\Bushawk XP"? The installer has no problems finding this in Vista 64 bit - I'm using that too. Link to comment Share on other sites More sharing options...
THibben 0 Posted December 3, 2008 Share Posted December 3, 2008 Could you please copy+paste the entry in "HKEY_Local_Machine\SOFTWARE\Wow6432Node\Aerosoft\Bushawk XP"? The installer has no problems finding this in Vista 64 bit - I'm using that too. Can't copy but this is it:(default) Reg_SZ (value not set)FSX_Path REG_SZ E:\Prigram Files\Microsoft Games\Microsoft Flight Simulator XPath REG_SZ E:\Program Files\Microsoft Games\Microsoft Flight Simulator XVersion REG_SZ 1.00Sorry about the lack of spaces as they wouldn't copy Link to comment Share on other sites More sharing options...
horst18519 231 Posted December 3, 2008 Share Posted December 3, 2008 That's all I need. Did you purchase the Bushhawk here in the Aerosoft shop? German or American shop? Link to comment Share on other sites More sharing options...
helialpin 47 Posted December 3, 2008 Share Posted December 3, 2008 Thank you for this update! I LOVE my low-poly model, high-res texture Bush Hawk! No it´s a really fluid flightsim feeling! I had another regedit problem (the FSX path wasn´t set although I´ve installed the Hawk as Admin) but I could solve that after I´ve heard about possible registry troubles so no big deal.I´ve to leave now for some island hopping in Tahiti! Thanks for the configurator to find out the best combination of high and low settings! Link to comment Share on other sites More sharing options...
THibben 0 Posted December 4, 2008 Share Posted December 4, 2008 That's all I need. Did you purchase the Bushhawk here in the Aerosoft shop? German or American shop?AerosoftDownload ShopOrder # 9471910/16/08 Link to comment Share on other sites More sharing options...
Raedwulf 0 Posted December 4, 2008 Share Posted December 4, 2008 I'm having troubles finding the Bush Hawk in my support linkBeaverX, Twin Otter and expansion and others, but no Bush Hawk Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted December 4, 2008 Share Posted December 4, 2008 Hello Raedwulf,If you purchased it from the Aerosoft Online Shop it should automatically be there, if you purchased it Elsewhere then you will need to register it first. Link to comment Share on other sites More sharing options...
horst18519 231 Posted December 4, 2008 Share Posted December 4, 2008 It seems we had some last minute changes on the installer (or rather 10 minutes late), so there seem to be some 5 or 6 out there who may have problems with the patch installer. If so, please uninstall the Bush Hawk, download the 1.00 again from the shop, then install 1.00 and 1.10 and you should be fine.Sorry for that, folks. Link to comment Share on other sites More sharing options...
Raedwulf 0 Posted December 6, 2008 Share Posted December 6, 2008 Hello Raedwulf,If you purchased it from the Aerosoft Online Shop it should automatically be there, if you purchased it Elsewhere then you will need to register it first.Hi Shaun,I did buy from the AES shop, and it is registeredWhen I go to the pulldown 'Support for' there's a whole list of products; even stuff I don't have, so it doesn't come down to having registered a particular item Link to comment Share on other sites More sharing options...
bumprock 9 Posted December 8, 2008 Share Posted December 8, 2008 Hi Shaun,I did buy from the AES shop, and it is registeredWhen I go to the pulldown 'Support for' there's a whole list of products; even stuff I don't have, so it doesn't come down to having registered a particular itemRaedwulf,I enountered the identical problem when I went to download the BH update. It was easy to remedy. When you first log in to the FAQ/Updates section you will see an option to requst support for another product. Click that link and select the BushHawk. Paste in your serial number and you are good to go. Link to comment Share on other sites More sharing options...
Raedwulf 0 Posted December 9, 2008 Share Posted December 9, 2008 Raedwulf,I enountered the identical problem when I went to download the BH update. It was easy to remedy. When you first log in to the FAQ/Updates section you will see an option to requst support for another product. Click that link and select the BushHawk. Paste in your serial number and you are good to go.Now I feel like a complete moron Thanks Link to comment Share on other sites More sharing options...
horst18519 231 Posted December 10, 2008 Share Posted December 10, 2008 That means it works? Then you're no moron but rather a happy customer. I have to admit I had to look twice when I first tried to get support for one of my products, it can be a bit disturbing - but good to know it works now.Any feedback on your performances would be appreciated. Link to comment Share on other sites More sharing options...
Vindeballe 16 Posted December 10, 2008 Share Posted December 10, 2008 It seems we had some last minute changes on the installer (or rather 10 minutes late), so there seem to be some 5 or 6 out there who may have problems with the patch installer. If so, please uninstall the Bush Hawk, download the 1.00 again from the shop, then install 1.00 and 1.10 and you should be fine.Sorry for that, folks. Hello!Coming back after 2 weeks at work I saw the update and downloaded it, but had the same problem, it could not see my Bushhawk installation. My guess is there might be more then 5-6 customers out here facing the problem. .I did not know that the download file is changed without notice to those who allready have downloaded, and, yes, when it is bush aircrafts, I buy and download as soon as possible.Luckily I have a reasonobly fast download. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted December 10, 2008 Author Aerosoft Share Posted December 10, 2008 Hello!Coming back after 2 weeks at work I saw the update and downloaded it, but had the same problem, it could not see my Bushhawk installation. My guess is there might be more then 5-6 customers out here facing the problem. .I did not know that the download file is changed without notice to those who allready have downloaded, and, yes, when it is bush aircrafts, I buy and download as soon as possible.Luckily I have a reasonobly fast download.The easy way is to just remove the product and download a newer version. Link to comment Share on other sites More sharing options...
Recommended Posts