tango4 0 Posted November 21, 2008 Share Posted November 21, 2008 Hi there ! First I would like to congratulate you for this wonderful scenery! It's just brilliant ! I own the previous version and this one not only adds the latest changes to CDG but has been reprogrammed and is less FPS intensive while being even more beautiful! I just noticed a few things lacking (for information, I work as an ATC at CDG) and a little bug: -the new Apron control tower is not there (but it is very recent) -TWY E2 is now closed (also a very recent addition) -Around Terminal 1, on the aprons, there are no aircraft type markings on the ground across the yellow line (I mean the little lines indicating where to stop according to your type of aircraft) -And a bug on the DME's of the ILS's: the problem is that the DME's indicate zero when you are above the localizer antennae instead of the TDZ. So basically, during the whole approach, you read approximately 2NM more than you should. Someone could provide me with a hand corrected AFCAD file but that could be nice if you could fix that in an official update.Anyway, thanks for this wonderful product !Best regards.Charles Link to comment Share on other sites More sharing options...
iData 0 Posted November 22, 2008 Share Posted November 22, 2008 I Think that there's also no AF Flights anymore on T2B Link to comment Share on other sites More sharing options...
tango4 0 Posted November 22, 2008 Author Share Posted November 22, 2008 That's correct, but I did not notice that because I do not use any traffic add-on.So I'm not 100% about that, but don't you think that AFR flight on terminal 2b are related to your traffic add-on and not the scenery itself ?Charles Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted November 22, 2008 Share Posted November 22, 2008 Charles,A question to you if you don't mind.Using this scenery I've noticed the present AFCAD sending aircraft to runways 09/27R and 08R/26L which are rather short, especially for heavies.What is these runways' usage in real life at CDG? Could you shed some light?Thanks in advance.Best regards,Rafal Link to comment Share on other sites More sharing options...
tango4 0 Posted November 22, 2008 Author Share Posted November 22, 2008 Well, you are correct!The normal use at CDG is inner runways for take-offs (you have 4200m) and outer runways for landings (2700m). That's the case 90% of the time.If one of the inner runways has to be closed (maintenance work, aircraft stuck on it...), usually, we often reroute the heavies to the available long runway and ask the mediums if they can take the shorter one.When we lose an outer runway, we use the long runway both for departure and arrivals, and we try to reroute some arrivals on the other pair.Basically, that's it. Of course this is just a summary but that's the idea!I hope I answered your question.Charles Link to comment Share on other sites More sharing options...
Rafal Haczek 1612 Posted November 22, 2008 Share Posted November 22, 2008 I hope I answered your question.Yes Charles, you did. Thank you very much!I'm still learning Paris GDG. It's a great airport.Best regards,Rafal Link to comment Share on other sites More sharing options...
iData 0 Posted November 23, 2008 Share Posted November 23, 2008 Another issue i've found when i was looking at the AFCAD : - The S3 is used only by Skyteam airliners. It's more about the medium sized gates. (In fact, I have deleted all of them to have more AF Aircrafts at T2F and T2D)Sorry for the French : tango4, si tu travailles à Roissy je suppose que tu parles Fr. Est ce que tu peux me dire à quel Satellite du T1 KD Avia se trouve ? Merci Link to comment Share on other sites More sharing options...
tango4 0 Posted November 23, 2008 Author Share Posted November 23, 2008 I'm not sure, but I would say T or U. (I think KD avia is known to ATC as KNI "Kaliningrad"). Link to comment Share on other sites More sharing options...
iData 0 Posted November 23, 2008 Share Posted November 23, 2008 That's it, they are KNIThanks ^^ Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted November 25, 2008 Share Posted November 25, 2008 -And a bug on the DME's of the ILS's: the problem is that the DME's indicate zero when you are above the localizer antennae instead of the TDZ.Hi CharlesYepp, that's one of the things which will be fixed in a first update. Please don't ask why this fault had happened... The most of ILS-DMEs (if the ILS have a DME) are located aside the Localizer indeed, but not in CDG, you're right! This are GP/DMEs and are placed directly aside the GP-Antenna. Except the ILS of Rwy 08L/26R: Both ILS have no DME in real and its also wrong in the AFCAD where you find a DME for 08L.This will be fixed too of course.Best regardsMike Link to comment Share on other sites More sharing options...
tango4 0 Posted November 25, 2008 Author Share Posted November 25, 2008 Wonderful !That is very good news indeed !Because I plan to use this scenery quite a lot (as I did with the previous version...)!!!Once again congratulations on your fantastic work.Charles Link to comment Share on other sites More sharing options...
yannis737 0 Posted February 9, 2009 Share Posted February 9, 2009 Where is the update for the DME? Link to comment Share on other sites More sharing options...
tango4 0 Posted February 9, 2009 Author Share Posted February 9, 2009 For what I heard, not released yet, but well underway !Charles Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted February 9, 2009 Share Posted February 9, 2009 For what I heard, not released yet, but well underway !CharlesAffirm! It required a little bit more time as just fixing the DME's due to the other improvements of the scenery which will be included "all in one" in the update. It will be released soon... Stay tuned! Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted February 19, 2009 Share Posted February 19, 2009 Hi gentsUpdate is released! Have fun! Link to comment Share on other sites More sharing options...
Air Holland 50 Posted February 20, 2009 Share Posted February 20, 2009 Hi gentsUpdate is released! Have fun! Where can i get the update i cant see it in the updates list while i have registerd my CDG version. Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted February 21, 2009 Share Posted February 21, 2009 Where can i get the update i cant see it in the updates list while i have registerd my CDG version.If you bought CDG directly from the Aerosoft store and you are correctly logged in there, then it should be listed on the support-site. If not, you have to contact Aerosoft I guess. Link to comment Share on other sites More sharing options...
aaphebus 13 Posted February 21, 2009 Share Posted February 21, 2009 Hi, I too can't find this upgrade for LFPG. I've downloaded it directly from Aerosoft online store, and when I go to Faq/update I can't see no LFPG upgrade in the list. Where can I find it please? Link to comment Share on other sites More sharing options...
Mike Strasser 6 Posted February 21, 2009 Share Posted February 21, 2009 Please contact Aerosoft for this. I'm not Aerosoft-Staff. Link to comment Share on other sites More sharing options...
Shaun Fletcher 570 Posted February 23, 2009 Share Posted February 23, 2009 Hello aaphebus,I see Mega Airport Paris CDG in your support database, maybe you are not looking at the correct product title! Link to comment Share on other sites More sharing options...
aaphebus 13 Posted February 26, 2009 Share Posted February 26, 2009 Hello aaphebus,I see Mega Airport Paris CDG in your support database, maybe you are not looking at the correct product title!Hello Shaun,Thanks for your answer. Yes it's true I can see it now, it's because I changed my email address, and I must log with old email to see the update. Now I'm going to download it. My mistake here, totally forgot about this point. Alain Link to comment Share on other sites More sharing options...
Recommended Posts