FSC190 1 Posted April 28, 2008 Share Posted April 28, 2008 Hallo,bei der Suche nach einem Problem in der Multiplayer-Darstellung ist mir in der Aircraft.cfg aufgefallen, dass in der Sektion Contact_Points bei den "scrape"-Einträgen eine andere Klasse eingetragen ist.[CONTACT_POINTS]// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16point.0= 4, 6.00, 6.65, -9.90, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 3, 0, 0point.1= 4, 6.00, -6.65, -9.90, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 2, 0, 0point.2= 4, -14.10, 6.65, -9.55, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 3, 0, 0point.3= 4, -14.10, -6.65, -9.55, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 2, 0, 0point.4 = 3, 0.0, -32.50, 0, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0point.5 = 2, 0.0, 32.50, 0, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0point.6 = 2, 18.5, 0.00, -4.5, 1000, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0 point.7 = 2, -33.3, 0.00, 0.4, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0point.8 = 2, -27.6, 0.00, -5.2, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 03 steht für die Klasse "skid", 2 für "scrape"Ist das Absicht und wenn ja, was berwirkt die Klasse "skid"?Das SDK schweigt sich da leider etwas aus. Link to comment Share on other sites More sharing options...
Finn 873 Posted April 28, 2008 Share Posted April 28, 2008 Hallo,bei der Suche nach einem Problem in der Multiplayer-Darstellung ist mir in der Aircraft.cfg aufgefallen, dass in der Sektion Contact_Points bei den "scrape"-Einträgen eine andere Klasse eingetragen ist.[CONTACT_POINTS]// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16point.0= 4, 6.00, 6.65, -9.90, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 3, 0, 0point.1= 4, 6.00, -6.65, -9.90, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 2, 0, 0point.2= 4, -14.10, 6.65, -9.55, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 3, 0, 0point.3= 4, -14.10, -6.65, -9.55, 2800, 0, 0, 0.0, 0.5, 1.0, 0.7, 0.0, 0.0, 2, 0, 0point.4 = 3, 0.0, -32.50, 0, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0point.5 = 2, 0.0, 32.50, 0, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0point.6 = 2, 18.5, 0.00, -4.5, 1000, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0 point.7 = 2, -33.3, 0.00, 0.4, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0point.8 = 2, -27.6, 0.00, -5.2, 1200, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 03 steht für die Klasse "skid", 2 für "scrape"Ist das Absicht und wenn ja, was berwirkt die Klasse "skid"?Das SDK schweigt sich da leider etwas aus.Below the tail of the twin otter there is a small skid !The differens is surely that You can scrape against the surface with the skid without crashing, wheras with the scrape scraping, it will crash ;-) !!!Finn Link to comment Share on other sites More sharing options...
FSC190 1 Posted April 28, 2008 Author Share Posted April 28, 2008 Ahh ja, Danke für die schnelle Antwort. Sehr wieder was gelernt. Link to comment Share on other sites More sharing options...
Recommended Posts