Stelios Christofides 1 Posted November 19, 2021 Share Posted November 19, 2021 Hi Although I read the manual I still can not understand why when I have the Traffic density set at 15, I still get the same amount of planes parked at the airports as when I have it set at 40? I have the setting AI OFFLINE It must be a way to adjust this. Stelios Link to comment Share on other sites More sharing options...
RogePete 28 Posted November 19, 2021 Share Posted November 19, 2021 Did you set your static ground aircraft to zero? Link to comment Share on other sites More sharing options...
Developer Simple Traffic 72 Posted November 19, 2021 Developer Share Posted November 19, 2021 Hi Stelios Simple Traffic includes offline AI traffic files based on real-world airline activity levels. In our files, each AI fllightplan is randomly assigned a Density Value between 1 and 100. When you set the Density Level in the sim, then the sim will only load Simple Traffic flights with a Density Value equal to or lower than that Density Level setting. This affects the frequency of arriving and departing AI flights, but does not necessarily correspond directly to the percentage of airport gates populated with sleeping aircraft. The logic used to populate the gates is internally controlled by the sim, and the sim will still continue to populate the gates with upcoming departures within your Density Level setting. So if you reduce the Density setting, whilst you will see less frequent arrivals and departures, you will still see a large number of sleeping aircraft at the gate. This is not something that Simple Traffic has any influence over. 100% corresponds to real world activity levels, which is more than the sim can currently handle. We recommend a current setting of around 30% in most areas, but you may need to reduce it further in particularly busy areas. And as RogePete says above, if you have set your Ground Aircraft Density then that will populate static aircraft at the gates independently of your AI Traffic Density setting. Link to comment Share on other sites More sharing options...
Stelios Christofides 1 Posted November 19, 2021 Author Share Posted November 19, 2021 1 hour ago, RogePete said: Did you set your static ground aircraft to zero? Ues I did. it is set to 0 Link to comment Share on other sites More sharing options...
Stelios Christofides 1 Posted November 19, 2021 Author Share Posted November 19, 2021 51 minutes ago, Simple Traffic said: Hi Stelios Simple Traffic includes offline AI traffic files based on real-world airline activity levels. In our files, each AI fllightplan is randomly assigned a Density Value between 1 and 100. When you set the Density Level in the sim, then the sim will only load Simple Traffic flights with a Density Value equal to or lower than that Density Level setting. This affects the frequency of arriving and departing AI flights, but does not necessarily correspond directly to the percentage of airport gates populated with sleeping aircraft. The logic used to populate the gates is internally controlled by the sim, and the sim will still continue to populate the gates with upcoming departures within your Density Level setting. So if you reduce the Density setting, whilst you will see less frequent arrivals and departures, you will still see a large number of sleeping aircraft at the gate. This is not something that Simple Traffic has any influence over. 100% corresponds to real world activity levels, which is more than the sim can currently handle. We recommend a current setting of around 30% in most areas, but you may need to reduce it further in particularly busy areas. And as RogePete says above, if you have set your Ground Aircraft Density then that will populate static aircraft at the gates independently of your AI Traffic Density setting. Than you for your explanation. i will set it to 20 I think. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted November 20, 2021 Deputy Sheriffs Share Posted November 20, 2021 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.