Jump to content

AI Aircraft Traffic Density


Stelios Christofides
 Share

Recommended Posts

  • Developer

Hi Stelios

 

Simple Traffic includes offline AI traffic files based on real-world airline activity levels. In our files, each AI fllightplan is randomly assigned a Density Value between 1 and 100. When you set the Density Level in the sim, then the sim will only load Simple Traffic flights with a Density Value equal to or lower than that Density Level setting.

 

This affects the frequency of arriving and departing AI flights, but does not necessarily correspond directly to the percentage of airport gates populated with sleeping aircraft. The logic used to populate the gates is internally controlled by the sim, and the sim will still continue to populate the gates with upcoming departures within your Density Level setting.

 

So if you reduce the Density setting, whilst you will see less frequent arrivals and departures, you will still see a large number of sleeping aircraft at the gate. This is not something that Simple Traffic has any influence over.

 

100% corresponds to real world activity levels, which is more than the sim can currently handle. We recommend a current setting of around 30% in most areas, but you may need to reduce it further in particularly busy areas.

 

And as RogePete says above, if you have set your Ground Aircraft Density then that will populate static aircraft at the gates independently of your AI Traffic Density setting.

  • Upvote 1
Link to comment
Share on other sites

51 minutes ago, Simple Traffic said:

Hi Stelios

 

Simple Traffic includes offline AI traffic files based on real-world airline activity levels. In our files, each AI fllightplan is randomly assigned a Density Value between 1 and 100. When you set the Density Level in the sim, then the sim will only load Simple Traffic flights with a Density Value equal to or lower than that Density Level setting.

 

This affects the frequency of arriving and departing AI flights, but does not necessarily correspond directly to the percentage of airport gates populated with sleeping aircraft. The logic used to populate the gates is internally controlled by the sim, and the sim will still continue to populate the gates with upcoming departures within your Density Level setting.

 

So if you reduce the Density setting, whilst you will see less frequent arrivals and departures, you will still see a large number of sleeping aircraft at the gate. This is not something that Simple Traffic has any influence over.

 

100% corresponds to real world activity levels, which is more than the sim can currently handle. We recommend a current setting of around 30% in most areas, but you may need to reduce it further in particularly busy areas.

 

And as RogePete says above, if you have set your Ground Aircraft Density then that will populate static aircraft at the gates independently of your AI Traffic Density setting.

Than you for your explanation. i will set it to 20 I think.

  • Like 1
Link to comment
Share on other sites

  • Tom A320 changed the title to AI Aircraft Traffic Density
Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...