KevyKevTPA 29 Posted November 18, 2021 Share Posted November 18, 2021 I just installed the new 550/700 update (I do NOT have the 900/1000 expansion) and tried to do an import, and it did not work. So I did a little digging and found out the flp file is supposed to go into the onestore/aerosoft-crj/work directory. Except I didn't have such a directory. So, I made one. Downloaded the flp from simbrief into it, and tried to import it into the MCDU. But all I got was "LOAD ERROR" in yellow. I literally installed the update less than an hour before this happened. Anybody have any help for this? Link to comment Share on other sites More sharing options...
Puuhbear 114 Posted November 18, 2021 Share Posted November 18, 2021 I import all my flightplans into C:\Users\YOUR NAME\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\aerosoft-crj\work I have the Aerosoft One version. Link to comment Share on other sites More sharing options...
KevyKevTPA 29 Posted November 18, 2021 Author Share Posted November 18, 2021 I have the marketplace version, but it worked fine before. I haven't flown it in awhile, and after doing the upgrade, this problem said "HI!" Link to comment Share on other sites More sharing options...
Jack Fleischmann 0 Posted December 7, 2021 Share Posted December 7, 2021 I have tried importing Simbrief plans but simbrief downloader doesn't seem to work CRJ 900-1000. Does anyone have a download path for these new planes that works in Simbrief downloader? Link to comment Share on other sites More sharing options...
LesOReilly 314 Posted December 7, 2021 Share Posted December 7, 2021 2 hours ago, Jack Fleischmann said: I have tried importing Simbrief plans but simbrief downloader doesn't seem to work CRJ 900-1000. Does anyone have a download path for these new planes that works in Simbrief downloader? the downloader knew I had 3 installs of the crj... offered up 3 directory paths but I had to change the last path by clicking on the folder icon and going up a level and then into the other crj 900-1000 work directory Please login to display this image. exported my flp and then went into the 900 and it works like a charm. Please login to display this image. Link to comment Share on other sites More sharing options...
Swiss Virtual Pilot 2 Posted December 10, 2021 Share Posted December 10, 2021 I recognized this behavior also yesterday. always exported to C:\Users\YOUR NAME\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\aerosoft-crj\work but i get e loaderror. Has this directory changed? Worked before flawless Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 10, 2021 Deputy Sheriffs Share Posted December 10, 2021 Talking about the 900-1000? Link to comment Share on other sites More sharing options...
Swiss Virtual Pilot 2 Posted December 10, 2021 Share Posted December 10, 2021 I've installed all 550/700/900/1000 but only tested the 700. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 10, 2021 Deputy Sheriffs Share Posted December 10, 2021 I just checked it and the route loads fine. So again the route for the 550/700 needs to be stored in this directory: C:\Users\USERNAME\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\aerosoft-crj\work for the 900/1000: C:\Users\USERNAME\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\packages\aerosoft-crj-900-1000\work The filename under which you have stored it must have a 8 character filename. Example: a flight plan from Munich to Dusseldorf can be named like EDDMEDDL.flp or MUCDUS01.flp So if you use the IATA code you have to add a 2-digit number. zo get a 8 character filename. If the flightplan still does not load, something else is not correct. in this case, please attach your flightplan. Link to comment Share on other sites More sharing options...
Swiss Virtual Pilot 2 Posted December 10, 2021 Share Posted December 10, 2021 Ok problem solved it seems there is a limitaion of max .flp files crj can handle. Ive deleted some files now the plan get loaded correctly. In the fmc pilot route list are max 8 pages with 8 plans visible. So maybe max 64 files in the work folder? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 11, 2021 Deputy Sheriffs Share Posted December 11, 2021 No, something was simply broken, there is no known limitation 1 Link to comment Share on other sites More sharing options...
Snorre 74 Posted December 16, 2021 Share Posted December 16, 2021 Jumping in this discussion as I have the exact same problem. No SimBrief flight gets loaded, all I get is the yellow error "Load Error". I tried 5 different flight plans, all are attached. Thanks! FlightPlans.zip Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 16, 2021 Deputy Sheriffs Share Posted December 16, 2021 I checked 2 of your flightplans (EBBRESMS and EKVGENVA) and both are loading fine. Thats what I get for EBBRESMS: Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Are you sure that you put the flightplans in the correct Work folder? 1 Link to comment Share on other sites More sharing options...
Snorre 74 Posted December 16, 2021 Share Posted December 16, 2021 Yes, definitely, I copied them from that folder. I tried again, and now I get "Route loaded", but the waypoints are empty and the route name is not filled in under "Route". Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 16, 2021 Deputy Sheriffs Share Posted December 16, 2021 Have you entered them as secondary flightplan? if so you need to activate it. Link to comment Share on other sites More sharing options...
Snorre 74 Posted December 18, 2021 Share Posted December 18, 2021 Sorry, I was away.... No, I entered the plan as the primary flight plan. Link to comment Share on other sites More sharing options...
Jürgen Fries 0 Posted December 26, 2021 Share Posted December 26, 2021 Hello! I have the same problem and cannot load a flightplan from simbrief. For example: LFLSEDDF in ROUTE in the FMC said "ROUTE LOADED", but by pressing EXEC nothing happens. I tried it with PILOT ROUTE LIST. It does not work. Today I have installed the last version of CRJ 1.015.0 again bei ONE. But there is no result. What can I do? Best regards Jürgen Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 26, 2021 Deputy Sheriffs Share Posted December 26, 2021 Can you post the flightplan please? Link to comment Share on other sites More sharing options...
Jürgen Fries 0 Posted December 26, 2021 Share Posted December 26, 2021 Format FLP or PLN? Link to comment Share on other sites More sharing options...
Jürgen Fries 0 Posted December 26, 2021 Share Posted December 26, 2021 LFLSEDDF.flp [CoRte] ArptDep=LFLS RwyDep=LFLS09 ArptArr=EDDF RwyArr=EDDF07R ArptAltn=EDDL SID=SOPL4E SIDEnrTrans=SOPLO STAR=EMPA3D EnrSTARTrans=EMPAX STARApprTrans= APPR_Trans=VECTORS RwyArrFINAL=I07R CoRoute= FltNo=VGA1911 DctWpt1=DITON DctWpt1Coordinates=47.302222,8.333333 DctWpt2=ZUE DctWpt2Coordinates=47.592167,8.817667 DctWpt3=SONOM DctWpt3Coordinates=47.784167,8.896111 DctWpt4=LADOL DctWpt4Coordinates=48.166667,8.953333 DctWpt5=EMPAX DctWpt5Coordinates=48.461958,8.998150 [PerfData] CrzAlt=36000 CrzAltAltn=26000 PaxCnt=70 PaxWeight=175 CargoWeight=3849 FuelWeight=8915 WindDirClb=268 WindSpdClb=30 WindDirCrz=267 WindSpdCrz=29 WindDirDes=279 WindSpdDes=29 ISADev=-5 ResFuel=1327 TaxiFuel=500 [VNAVData] TransAlt=5000 TransLvl=18000 Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 26, 2021 Deputy Sheriffs Share Posted December 26, 2021 Please post the file, to avoid missing/wrong characters Link to comment Share on other sites More sharing options...
LesOReilly 314 Posted December 26, 2021 Share Posted December 26, 2021 5 hours ago, Jürgen Fries said: Hello! I have the same problem and cannot load a flightplan from simbrief. For example: LFLSEDDF in ROUTE in the FMC said "ROUTE LOADED", but by pressing EXEC nothing happens. I tried it with PILOT ROUTE LIST. It does not work. Today I have installed the last version of CRJ 1.015.0 again bei ONE. But there is no result. What can I do? Best regards Jürgen double checking ... you are loading it via the the Secondary Flight plan page and not the Primary correct? Link to comment Share on other sites More sharing options...
Jürgen Fries 0 Posted December 26, 2021 Share Posted December 26, 2021 Hello, LesOReilly! Not as a secondary flightplan. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 26, 2021 Deputy Sheriffs Share Posted December 26, 2021 1 hour ago, mopperle said: Please post the file, to avoid missing/wrong characters Link to comment Share on other sites More sharing options...
Jürgen Fries 0 Posted December 26, 2021 Share Posted December 26, 2021 I have found a solution: The problem are to many files in the directory \work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now