BobbyFuzzy 88 Posted July 31, 2021 Share Posted July 31, 2021 39 minutes ago, Mogens Gaardbo said: each time the m-files I just delete is recreated again That is the correct behaviour, however, if you follow the steps in the workaround described exactly, the speed tape should work as expected. You will need to work through the steps again from the beginning following yesterdays update. 1 hour ago, panda180 said: Can someone confirm is the speed tape temp fix is working or not after yesterday's mini update? You will have to go through the steps again but yes it does work for me. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted July 31, 2021 Developer Share Posted July 31, 2021 18 hours ago, IcemanFBW said: We were able to get around this issue for the A32NX by writing our own custom implementations of pow() and exp() - which (at least in our case), were the cmath functions that were returning erroneous values as a result of the --fast-math compiler option forced in SU5. I tried two or three alternative pow() functions but all caused the same issue. There always was something too close to zero... I'll try more. I want to get this done after all. Link to comment Share on other sites More sharing options...
roland_lfor 3 Posted July 31, 2021 Share Posted July 31, 2021 I applied the Fast Wasm compilation method and started today my first CRJ flight since SU5, it worked fine Thanks Link to comment Share on other sites More sharing options...
DGH 0 Posted July 31, 2021 Share Posted July 31, 2021 @Hans Hartmann Did some testing after the hot fix. Tweaked my system so that I run around 30 FPS with the planes I use most at demanding Airport. Test startup : EHAM / RNW 24 / 12.00 / preset broken clouds / Real AI ON / ready for flight Running on gaming laptop with 32GB and Nvidia 2070 Max Q FBW A320 developer version : 31 FPS CRJ Fast WASM OFF : up to 36 FPS CRJ Fast WASM ON : 23 FPS max .. mostly around 19 to 21 Tested the above 2 times ( so 6 restarts of MSFS but also 6 Laptop reboots for fresh start in total ) Also ... once the thing is complied and is working .. besides switching off developer mode ... also switching off Fast WASM again will keep the CRJ working ( not sure if u knew ) Hope the Fast WASM is just a temp workaround and we will get the FPS back once a fix is made by Asobo / you Link to comment Share on other sites More sharing options...
Moridin 85 Posted July 31, 2021 Share Posted July 31, 2021 Fast WASM definitely decreases performance. Dropped from avg 55 to 45-50. Link to comment Share on other sites More sharing options...
willnosmer Aileron 1 Posted August 1, 2021 Share Posted August 1, 2021 fast wasm compilation enabled. still stuck sometimes. XBOX game controller increase/decrease throttle by button fail. mouse click on visual throttle allow button to increase once / twice. CRJ now back in hangar. Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 1, 2021 Share Posted August 1, 2021 Now I succeded flying with stable airspeed - for the third time following the workaround But the problem with catching the glidescope seems to have reappeared. LOC - yes, but GS - nope. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted August 2, 2021 Deputy Sheriffs Share Posted August 2, 2021 17 hours ago, Mogens Gaardbo said: But the problem with catching the glidescope seems to have reappeared. LOC - yes, but GS - nope. We are aware and fix for this in pending on the 1.0.6 update which is currently pending a sim hotfix. Link to comment Share on other sites More sharing options...
RF pilot 35 Posted August 2, 2021 Share Posted August 2, 2021 Thank you. Do aerosoft have any information from MSFS as to when the next sim hotfix will be issued? There are multiple problems the SU5 has introduced, so really they do have a responsibility to fix this urgently. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted August 2, 2021 Deputy Sheriffs Share Posted August 2, 2021 1 hour ago, RF pilot said: Do aerosoft have any information from MSFS as to when the next sim hotfix will be issued? No, they do not give such infos. Link to comment Share on other sites More sharing options...
Rostyslav Kudlak 0 Posted August 3, 2021 Share Posted August 3, 2021 Please login to display this image. Link to comment Share on other sites More sharing options...
Moridin 85 Posted August 5, 2021 Share Posted August 5, 2021 Hotfix incoming: Quote Aerosoft CRJ – We have found and fixed a bug in an open-source math library that is part of Web Assembly [wasi-libc] which was part of the CRJ and has been resolved. A new package will be made available in the next few days. Link to comment Share on other sites More sharing options...
Anthony Gawain 1 Posted August 5, 2021 Share Posted August 5, 2021 Hi mates, I have not tested it with the CRJ but in the A32NX the problem with the speed is fixed by not putting live weather. Link to comment Share on other sites More sharing options...
panda180 12 Posted August 8, 2021 Share Posted August 8, 2021 Hi guys, just wondering if this latest hotfix is what was needed for Aerosoft to update the CRJ? Has anyone heard anything? Thanks Link to comment Share on other sites More sharing options...
g5crj 6 Posted August 8, 2021 Share Posted August 8, 2021 5 hours ago, panda180 said: Hi guys, just wondering if this latest hotfix is what was needed for Aerosoft to update the CRJ? Has anyone heard anything? Thanks I have tested the new asobo's hotfix and the speed tape issue is indeed fixed - even without using the fast wasm workaround. Even though the CRJ is flyable to a degree as of the new asobo hotifix, I would say it's still suffering the effects of SU5 (plenty of issues around ILS and what not). Hoping that Aerosoft's update will fix most of that. Link to comment Share on other sites More sharing options...
panda180 12 Posted August 8, 2021 Share Posted August 8, 2021 38 minutes ago, g5crj said: I have tested the new asobo's hotfix and the speed tape issue is indeed fixed - even without using the fast wasm workaround. Even though the CRJ is flyable to a degree as of the new asobo hotifix, I would say it's still suffering the effects of SU5 (plenty of issues around ILS and what not). Hoping that Aerosoft's update will fix most of that. Thank you, just did a quick circuit flight and it does seem to be fixed now. Yahoo! Link to comment Share on other sites More sharing options...
Moridin 85 Posted August 8, 2021 Share Posted August 8, 2021 So we can turn Fast WASM off in dev options? Please confirm! I still have it on... Current observations with Fast WASM on: 1. HUD working, as always (never stopped). 2. ILS GS not capturing. 3. Speed tape is fine. 4. Cockpit lighting looks a little wonky when the lights falls directly on the interior (e.g. during a sunrise). Link to comment Share on other sites More sharing options...
RF pilot 35 Posted August 8, 2021 Share Posted August 8, 2021 Yes i just had a flight with fast wasm off and speed tape is working Link to comment Share on other sites More sharing options...
g5crj 6 Posted August 9, 2021 Share Posted August 9, 2021 Just to clarify, turning off fast wasm int he dev options is not enough to test the new asobo hotfix, you need to delete the files as you did the first time around to have them be generated again. Only then are you actually testing anything, otherwise you are still using the files generated with the fast wasm option. Link to comment Share on other sites More sharing options...
Moridin 85 Posted August 9, 2021 Share Posted August 9, 2021 4 hours ago, g5crj said: Just to clarify, turning off fast wasm int he dev options is not enough to test the new asobo hotfix, you need to delete the files as you did the first time around to have them be generated again. Only then are you actually testing anything, otherwise you are still using the files generated with the fast wasm option. Will test in a few mins. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 9, 2021 Aerosoft Share Posted August 9, 2021 Until our update is out it won't matter a lot. Link to comment Share on other sites More sharing options...
Moridin 85 Posted August 9, 2021 Share Posted August 9, 2021 34 minutes ago, Mathijs Kok said: Until our update is out it won't matter a lot. 1. Deleted m*.* files. 2. Launched MSFS. 3. Turned Dev on. 4. Turned Fast WASM off. 5. Turned Dev off. 6. Started a flight with the CRJ. Took it up to FL390 at speeds between 150-300 KT. Descended at those same speeds. A. HUD works fine (as it always did for me). B. Speed tape works properly. C. Noticed an increase in fps without Fast WASM. Did not test anything else. @Mathijs Kok , could you clarify why my speed tape is working without Fast WASM? Should I have restarted MSFS one more time after disabling the option? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 9, 2021 Aerosoft Share Posted August 9, 2021 Dear friends, please just wait for the update. Any information we give now will just confuse things. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted August 13, 2021 Developer Share Posted August 13, 2021 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.