Carl Lundborg 2 Posted June 10, 2021 Share Posted June 10, 2021 Suddenly the elevator axis is moving the altitude knob on Autopilot. Uinstalled the CRj and nothing is programmed on the Honeycomb Alpha; unless the elevator. Something wrong. But 110% secure; nothing is mapped on the Alpha axis than the elevator axis. Please help. Only an Issue in the CRJ - never happens to other aircrafts. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 10, 2021 Aerosoft Share Posted June 10, 2021 I am sorry, but even though you are 110% sure, this simply has to be a double assignment. If there would be a bug we would have seen hundreds of very upset customers. If you are sure it is, just start with a 100% empty profile and start to assign axis and buttons. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 10, 2021 Author Share Posted June 10, 2021 Nope. But sometimes solves when restarting sim... Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 10, 2021 Aerosoft Share Posted June 10, 2021 Dear Sir, The elevator is an axis. The altitude knob must be controlled by a ON/OFF contact. -----> There are very few chances for the elevator to DIRECTLY drive the altitude knob. Can you please make three tests : - 1 - Make a search on axis in the controller configuration to show the functions assigned to the elevator axis. Please login to display this image. - 2 - Mage a search on the PA altitude setting function in the controller configuration to show the buttons or any trigger assigned to it. - 3 - Go in the Windows Joystick utility and see if, by chance, the movment ot the elevator axis would not trigger some "ghost" input that would control the PA altitude setting. (Just move the yoke and look for inputs to illuminate I suppoes you are not using any third party software such as Spad.Next or AxesAndOhs ? Best regards. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 11, 2021 Author Share Posted June 11, 2021 Tested all of this. It is not working still. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 11, 2021 Author Share Posted June 11, 2021 The only thing is moving is the knob itself with sound. The altitude setting is not changing. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 11, 2021 Author Share Posted June 11, 2021 Tried both my Honeyomb Alpha and my joystick. Happens on both devices... Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 11, 2021 Aerosoft Share Posted June 11, 2021 Okay, Cedric will be replying early next week Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 11, 2021 Author Share Posted June 11, 2021 Great. Restarted computer. It works perfectly. Restarted again. Broken. Also uninstalled AES bridge. Not working… Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 12, 2021 Author Share Posted June 12, 2021 Seems to be related to Axis And Ohs map in Community Folder "lorbysi-content-hooks". Does someone else have the same problem? Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 12, 2021 Aerosoft Share Posted June 12, 2021 Dear Carl, This might be the case. AxisAndOhs can work on L-Vars (Internal variables of and addon) And there are different L-Vars to visually move a button on the dashborad and to actually change the value that buttons is controlling. The problem you seem to have (Button moving with sound - altitude not changing) could be related to some L-vars being addressed, from within AxisAndOhs. Do you use AxisAndOhs? And if yes, do you know exactly what script or data-addressing it does ? Best regards. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 13, 2021 Author Share Posted June 13, 2021 Even if I have deactivated all scripts in Axis and Ohs it moves. But when deleting the map mentioned above, it works… but then the Axis and Ohs don’t. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 14, 2021 Aerosoft Share Posted June 14, 2021 Hi Carl, I think you opened another similar post to wich I just answered. There must be someting in AAO. Can you please create and activate a blank configuration setup in AAO and check if the issue still happens ? Best regards. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 14, 2021 Author Share Posted June 14, 2021 Blank confit and still exists. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 16, 2021 Author Share Posted June 16, 2021 @SimWare Still problem with blank config... Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 16, 2021 Aerosoft Share Posted June 16, 2021 Dear Carl, This is weird... Can you please confirm that the problem doesn't arise when you remove AAO from the community folder ? Then, could you close MSFS, uninstall AAO, start MSFS, close it, reboot the computer and reinstall AAO, if possible from a fresh download ? Thank you. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 16, 2021 Aerosoft Share Posted June 16, 2021 Also, you may want to check that nowhere in AAO or in any other 3rd-party utility, a reference to ASCRJ_FCP_ALT_SEL or ASCRJ_FCP_ALT_CHANGE is made. These are the L-Vars related to the autopilot altitude rotating know (NOT the wheel) Thank you. Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 16, 2021 Aerosoft Share Posted June 16, 2021 Another point, if you haven't yet uninstalled AAO, can you please go in the "Connection" menu and click "Disconnect" ? There sould not be any reference to the loaded plane on the main AAO screen. It should just say "Connect to Simulator" Thank you. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 17, 2021 Author Share Posted June 17, 2021 Even if uinstalled and disconnect. It still moves. However, egen deleting ”lorbysi-content-hooks” from community folder it stops. But den AOO don’t works. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 17, 2021 Author Share Posted June 17, 2021 Solved it. Deleted all cache files Link to comment Share on other sites More sharing options...
Aerosoft SimWare 730 Posted June 18, 2021 Aerosoft Share Posted June 18, 2021 Dear Carl, Thank you for this feedback. This is strabnge however, as uninstalling it via the Windows Apps configuration panel should also have removed any cache files related to AAO. However it now works, that is the most important. Have fun flights. Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 21, 2021 Author Share Posted June 21, 2021 @SimWare Strange. The problem came back when I started the sim today. Deleted cache and worked again. Restarted computer. Stops working. What could be wrong in cache? Link to comment Share on other sites More sharing options...
Carl Lundborg 2 Posted June 29, 2021 Author Share Posted June 29, 2021 No idea from Aerosoft? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 29, 2021 Aerosoft Share Posted June 29, 2021 No. Simply no idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.