Timo Lariviere 3 Posted April 6, 2021 Share Posted April 6, 2021 I have a problem with my CRJ. The Perfomence page in my CRJ isn't doing what I want. When I remove all my Passenger and Cargo from the Plane, The ZFW is still at 24175KG and not at the minimum ZFW. Or different szenario, when I change it to put a ZFW into it and I put for example. 21760KG in it and copy it to FMS, the FMS shows a ZFW from 29064. I've just tried to take off with the Takeoff Trim from 7.4 from the EFB, but the plane doesnt take off. Furthermore when I'm on Cruise (FL300), the Plane is still climbing even tho the Trim is at 0.0 Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 6, 2021 Aerosoft Share Posted April 6, 2021 There are multiple topics about this already. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 6, 2021 Author Share Posted April 6, 2021 Im completly new on this forum, can you tell me where I can find these Topics? Link to comment Share on other sites More sharing options...
chrissel 1 Posted April 6, 2021 Share Posted April 6, 2021 Try mine. But it wasn't the first either. They've combined mine with an other one Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 6, 2021 Author Share Posted April 6, 2021 Yeah Chrissel but they also didnt had a solution for youre problem. I think we two have the same problem. Could you fix it now? Link to comment Share on other sites More sharing options...
chrissel 1 Posted April 6, 2021 Share Posted April 6, 2021 Just use the first page where you can select the amount of passengers. And the missing weight to reach your PAYLOAD of your flightplan, you can add with forward and aft cargo. The PAYLOAD shown at the bottom of your EFB should be the same as in your flightplan. When you do this, the loading will be correct. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 6, 2021 Author Share Posted April 6, 2021 Thank Chrissel this is now working, but I still cant takeoff. I dont now what, but the plane won't want to go up. Link to comment Share on other sites More sharing options...
quasiguru 15 Posted April 6, 2021 Share Posted April 6, 2021 21 minutes ago, Timo Lariviere said: Thank Chrissel this is now working, but I still cant takeoff. I dont now what, but the plane won't want to go up. Is your Flight model set to modern under options flight model on the Simulator? If you cannot takeoff how do you get up to cruise? Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted April 6, 2021 Share Posted April 6, 2021 Do you mean that the plane won't take off at all or it just takes off much too late? I had that issue after updating but I did a quick reset and it's been great ever since. As long as the Stab Trim is set to the correct setting it takes off beautifully. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 6, 2021 Author Share Posted April 6, 2021 Vor 1 Stunde, quasiguru sagte: Is your Flight model set to modern under options flight model on the Simulator? If you cannot takeoff how do you get up to cruise? I have to set the trim to 11 or 12 until it raises the nose. But after Takeoff I could put the Trim to 3 and the plane still doesnt go into a complete dive. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 6, 2021 Author Share Posted April 6, 2021 vor 56 Minuten, Chaxterium sagte: Do you mean that the plane won't take off at all or it just takes off much too late? I had that issue after updating but I did a quick reset and it's been great ever since. As long as the Stab Trim is set to the correct setting it takes off beautifully. I need too much trim until it raises the nose Link to comment Share on other sites More sharing options...
Crabby 28 Posted April 6, 2021 Share Posted April 6, 2021 7 hours ago, Timo Lariviere said: Im completly new on this forum, can you tell me where I can find these Topics? Using he search function that is provided at no additional charge. Link to comment Share on other sites More sharing options...
Crabby 28 Posted April 6, 2021 Share Posted April 6, 2021 39 minutes ago, Timo Lariviere said: I need too much trim until it raises the nose IS your flight model set to MODERN in MSFS? If not it MUST be. Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted April 6, 2021 Share Posted April 6, 2021 1 hour ago, Timo Lariviere said: I need too much trim until it raises the nose I had a very similar problem. You shouldn't need any trim to raise the nose off the ground; unless you mean elevator when you say 'trim'. You should only need elevator and it should come off the ground nice and easy when you get to VR (provided the stab trim is set to the proper setting before take off). If you're still having issues try resetting the plane. It's a very quick procedure and it worked for me. Take offs have been flawless ever since. Link to comment Share on other sites More sharing options...
John2 196 Posted April 6, 2021 Share Posted April 6, 2021 I am assuming that Hans is looking at a number of issues related to weight and balance and performance/climb issues. However, it would be nice if someone like Mathijs would confirm that this is the case so that we can stop chasing our tails. Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted April 6, 2021 Share Posted April 6, 2021 2 hours ago, Timo Lariviere said: I have to set the trim to 11 or 12 until it raises the nose. But after Takeoff I could put the Trim to 3 and the plane still doesnt go into a complete dive. What kind of controller do you have for controlling pitch? A yoke, or joystick? You should not have to use trim to raise the nose to take off. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 7, 2021 Author Share Posted April 7, 2021 vor 17 Stunden , JRBarrett sagte: What kind of controller do you have for controlling pitch? A yoke, or joystick? You should not have to use trim to raise the nose to take off. I use the T1600M and I use the joystick but in adition to that I always has to Trim the plane until the Plane goes up. Im right now not home but I will look if my flight model is to modern. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 7, 2021 Aerosoft Share Posted April 7, 2021 Also check if there is not an issue with assignments, that would explain rather perfectly what you see. Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted April 7, 2021 Share Posted April 7, 2021 11 minutes ago, Timo Lariviere said: I use the T1600M and I use the joystick but in adition to that I always has to Trim the plane until the Plane goes up. Im right now not home but I will look if my flight model is to modern. Well that might be part of the issue. Under no circumstances should you ever need to use trim to lift the plane off the runway unless the elevators are jammed. If you can't lift the airplane off the runway with just the elevators then something is wrong. Definitely do as @Mathijs Kok suggested and check your control assignments. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 7, 2021 Aerosoft Share Posted April 7, 2021 8 minutes ago, Chaxterium said: Well that might be part of the issue. Under no circumstances should you ever need to use trim to lift the plane off the runway unless the elevators are jammed. I would suggest brakes at that point. Loads of brakes.... Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted April 7, 2021 Share Posted April 7, 2021 Just now, Mathijs Kok said: I would suggest brakes at that point. Loads of brakes.... Indeed! But if it was to be a place like Saba where going off the end of the runway means a 150ft drop into the ocean then I might give the elevator trim a shot. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 7, 2021 Aerosoft Share Posted April 7, 2021 1 hour ago, Chaxterium said: Indeed! But if it was to be a place like Saba where going off the end of the runway means a 150ft drop into the ocean then I might give the elevator trim a shot. 1981, Northern Finland, I simply do not know the airport anymore. MD80. Pilot taxied to the end of the runway. Then used reverse to get his main gear on the grass. He hit grass on the other end of the runway as well. When we landed in Helsinki my girlfriend and me wanted to drive back to Amsterdam but neither of us had drivers license. Link to comment Share on other sites More sharing options...
Timo Lariviere 3 Posted April 7, 2021 Author Share Posted April 7, 2021 Thanks The problem was that the flight model was not modern. It works now perfect thank you all guys Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted April 7, 2021 Share Posted April 7, 2021 27 minutes ago, Timo Lariviere said: Thanks The problem was that the flight model was not modern. It works now perfect thank you all guys Awesome. Enjoy the plane! 5 hours ago, Mathijs Kok said: 1981, Northern Finland, I simply do not know the airport anymore. MD80. Pilot taxied to the end of the runway. Then used reverse to get his main gear on the grass. He hit grass on the other end of the runway as well. When we landed in Helsinki my girlfriend and me wanted to drive back to Amsterdam but neither of us had drivers license. That would have scared the crap out of me. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted April 8, 2021 Deputy Sheriffs Share Posted April 8, 2021 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.