Thomas Tasler 3 Posted March 23, 2021 Share Posted March 23, 2021 Hello, approaching your new BER-Scenery (which is really good looking) I discovered a possible bug. I was flying on Vatsim, cleared for the ILS 25L. Unfortunately the CRJ700 was not receiving the localizer. Therefore I had to switch to a visual approach. Earlier that day I was approaching 25R already - catching the localizer without any problems. After the flight with the visual approach I got into the CJ4, trying to see, what I did wrong on the approach. But for some reasons I was unable to receive the localizer for 25L and 07R on this aircraft as well. Again 25R and 07L worked just fine. I used the frequencies published in the Navigraph charts - which are identical to the frequencies in your manual. Kind Regards Thomas Edit: Now I do receive the localizer, but only when passing approx 100ft AGL. Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 Yeah happened to me as well while testing the airport tonight. This is likely because the simulator's data doesn't have the runway. It believes it's still Schoenfeld. I hoped Navigraph's data would solve the issue but it does not (but it does add the arrivals that are also missing in base MSFS). Link to comment Share on other sites More sharing options...
Der Merowinger 162 Posted March 24, 2021 Share Posted March 24, 2021 The same for me too, with the FBW A320. Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 Actually, I have to correct what I said in the post above. It was the result of superficial testing and incorrect. I have found what the issue is by going deeper into my testing. The ILS for runway 07L (110.7) and 25R (109.9) are mostly correct, meaning that they can be tuned and approached from the correct direction. The ILS for Runway 25L (109.5) and Runway 07R (109.7) actually exist and transmit, but are directional and inversed. Meaning their signal points east for 07R and west for 25L. The result is that they won't work and will appear not tuned if you approach from the correct direction. They will appear regularly and they will tune "correctly" if you approach them from the wrong direction. Of course, they're unusable. I believe the localizers should be tunable from all directions anyway, am I wrong? The default scenery from MSFS has all ILS correctly implemented and facing the right direction. The localizers can actually be tuned from all directions, but the needles on the ILS will face the correct ways for all runways, which I believe is the correct behavior? I have tested this for both the default A320 and the A32NX by FlyByWire. Both returned identical results. In addition to that, this scenery has only the four ILS selectable and "NDBDME" for runway 07L (not sure what that is, it doesn't appear in Navigraph or NavDataPro), as seen in the image attached. The default scenery also has LOC approaches for all runways, RNAV for all runways, and VORDME for 25L and 7R, matching with both Navigraph and NavDataPro. All of those are missing here. All STARs are also missing both in the default sim and in Limesim's scenery, and the only way to get them is Navigraph. Said STARs are also missing in NavDataPro's charts (and in the internal database of the CRJ, which I imagine is also based on NavDataPro) Navigraph does not fix the incorrect ILS for runway 25L and 07R, unfortunately. I have not found a way to fix those besides removing the scenery. Please login to display this image. Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 24, 2021 Share Posted March 24, 2021 Thanks for the in-depth checking guys! Apparently the testing of the navaids and ILS functionality didn't happen as it should have. Working on a small fix now and expect to send it around in a while. Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 27 minutes ago, Sasa said: Thanks for the in-depth checking guys! Apparently the testing of the navaids and ILS functionality didn't happen as it should have. Working on a small fix now and expect to send it around in a while. You're very welcome. It's a great scenery otherwise, so I'm glad to see you're on it Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 @Sasa A bit of an addition: if you want a relatively quick and easy way to test at least the availability of the localizers and the directions of the ILS, you can simply spawn somewhere close to the airport, tune the frequency you want to test, and then just move around in slew mode to see where it tunes and where it does not. Then you can look at the needles to see the direction of the ILS (the small cross is above the center of the navigation display in ILS mode if you're approaching from the right direction, below if you're approaching from the opposite direction). That being said, I actually do not know for sure if the localizers should be tunable from directions other than the front. It depends whether Berlin's localizers are back course capable or not. Further research would indicate that not all ILS systems support it, and I can't find specific info on Berlin. Perhaps @The Dude could help here. Also, the best way to do the testing I found it is with the A32NX instead of the default A320, because the default one may trick you into believing the ILS is available as its name will appear in the Radnav page of the MCDU regardless of whether it's tuned or not (the needle and data won't appear in the navigation display in ILS mode if it's not tuned). With the A32NX not only the needles and data don't appear if the ILS is not tuned, but its name doesn't appear at all in the RADNAV page. This is tuned, correct course Please login to display this image. This is tuned, back course (wrong if the ILS isn't back course capable) Please login to display this image. This is not tuned. Please login to display this image. Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 24, 2021 Share Posted March 24, 2021 Thanks again for the investigating this bug that shouldn't have been there in the first place! This is much appreciated! Attached is a little bugfix for you to check. Please report if this helps. EDIT (2021-03-15): Update is now available through the update described below! Installation: Unpack it into your BER installation folder, which is likely something like: C:\MSFS2020\Community\limesim-ber Do overwrite the two previously existing files (backup recommended!) Changelog: Removed all navaids from the airport itself so all navigation is provided by MSFS, not the add-on. The sim with its regular updates is likely a better source of navaid updates than a rather "static" addon-scenery. Accidental "approach exclusion tag" removed, so they should be all back in place. Checked the approach in the flight planning windows. They are now all there including RNAV and LOC. Also checked the ILS functionality and it seems to be working as it should now: Please login to display this image. Not sure myself if reversed approaches should be possible for BER. But I very much doubt that because there's an ILS on each side - so there would be no point in it. As soon as we have a confirmation from you guys it's working, we make this part of the release and also make it available in the AS Updater. Bests, Sascha Link to comment Share on other sites More sharing options...
Pil0tDave 8 Posted March 24, 2021 Share Posted March 24, 2021 Hi Sasa, with the Bug Fix the standard procedures from Microsoft for EDDB are back again...thank you Ill test now the ILS.... Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 6 hours ago, Sasa said: Thanks again for the investigating this bug that shouldn't have been there in the first place! This is much appreciated! Attached is a little bugfix for you to check. Please report if this helps. Installation: Unpack it into your BER installation folder, which is likely something like: C:\MSFS2020\Community\limesim-ber Do overwrite the two previously existing files (backup recommended!) Changelog: Removed all navaids from the airport itself so all navigation is provided by MSFS, not the add-on. The sim with its regular updates is likely a better source of navaid updates than a rather "static" addon-scenery. Accidental "approach exclusion tag" removed, so they should be all back in place. Checked the approach in the flight planning windows. They are now all there including RNAV and LOC. Also checked the ILS functionality and it seems to be working as it should now: Please login to display this image. Not sure myself if reversed approaches should be possible for BER. But I very much doubt that because there's an ILS on each side - so there would be no point in it. As soon as we have a confirmation from you guys it's working, we make this part of the release and also make it available in the AS Updater. Bests, Sascha limesim-ber_Navaid_Temporary_Fix_2020-03-24.zip 88.88 kB · 9 downloads Thanks for the fix. I'll test it tonight Also yes, I agree that back course is probably not supported by EDDB's ILS, mostly because they have to be rather new equipment, and back course, as far as I know, is mostly supported by older types of equipment. I'm ready to be corrected by more experienced pilots tho Link to comment Share on other sites More sharing options...
Onkelpuh 2 Posted March 24, 2021 Share Posted March 24, 2021 I have discovered an important problem that needs to be solved I've already failed twice to land on the 25L via ILS, he does get a signal on the plane but when I land afterwards, I go meters down into the countryside next to the track if you look at the map on the world map, I have to notice that all 4 ILS points are not on the runway but clearly off will this problem also be solved with this fix or is this another problem that has yet to be solved? I hope the English is easy to understand but google doesn't get it any better and my German is much better Please login to display this image. Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 24, 2021 Share Posted March 24, 2021 1 hour ago, Onkelpuh said: I have discovered an important problem that needs to be solved I've already failed twice to land on the 25L via ILS, he does get a signal on the plane but when I land afterwards, I go meters down into the countryside next to the track if you look at the map on the world map, I have to notice that all 4 ILS points are not on the runway but clearly off will this problem also be solved with this fix or is this another problem that has yet to be solved? I hope the English is easy to understand but google doesn't get it any better and my German is much better Please login to display this image. Is this with the fix above or without? Link to comment Share on other sites More sharing options...
Der Merowinger 162 Posted March 24, 2021 Share Posted March 24, 2021 Approaching is now possible perfectly, thanks a lot Sascha! Please login to display this image. Link to comment Share on other sites More sharing options...
Onkelpuh 2 Posted March 24, 2021 Share Posted March 24, 2021 Vor 1 Stunde, Sasa sagte: Ist dies mit der Korrektur oben oder ohne? Ich habe nicht in der Lage, die Lösung zu testen, aber deshalb fragte ich, ob er auch das Problem behebt, werde ich es immer noch testen und Feedback geben Link to comment Share on other sites More sharing options...
Onkelpuh 2 Posted March 24, 2021 Share Posted March 24, 2021 I just tested a short flight from EDDT to EDDB on 25L and with the * FIX * ILS now worked very well and without problems Please login to display this image. Link to comment Share on other sites More sharing options...
Abriael 377 Posted March 24, 2021 Share Posted March 24, 2021 Works perfectly. Don't mind me forgetting the landing gear. Please login to display this image. Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 25, 2021 Share Posted March 25, 2021 Guys, thanks a million! And shame on Abriael for scratching up shiny new runway surface. I'll let you know once the new file is available in the AS Updater. ILS locations on map: I assume these are the DME localizer (=antenna) locations, which MSFS shows instead of the actual ILS glideslope end. May be a bug in MSFS but Asobo may also have they reasons doing it that way. Not sure... Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 25, 2021 Share Posted March 25, 2021 FYI: The update is now available through the Aerosoft Updater: Please login to display this image. Bests, Sascha Link to comment Share on other sites More sharing options...
Onkelpuh 2 Posted March 26, 2021 Share Posted March 26, 2021 do you get the FIX anywhere without the AS Updater? Unfortunately, it doesn't work for me because the mods are not in the original community folder because I use Mod Linker Link to comment Share on other sites More sharing options...
Sasa 921 Posted March 26, 2021 Share Posted March 26, 2021 @Mathijs Kok, do you know? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted March 26, 2021 Aerosoft Share Posted March 26, 2021 I am sorry we can only handle that via the updater tool. Link to comment Share on other sites More sharing options...
Onkelpuh 2 Posted March 26, 2021 Share Posted March 26, 2021 Bedeutet das, dass ich mehrere Mods hin und her kopieren und vor allem umbenennen muss, damit der AS Updater sie erkennt und aktualisiert? große Link to comment Share on other sites More sharing options...
FilbertFlies 57 Posted March 26, 2021 Share Posted March 26, 2021 1 hour ago, Onkelpuh said: do you get the FIX anywhere without the AS Updater? Unfortunately, it doesn't work for me because the mods are not in the original community folder because I use Mod Linker Are you sure the AS Updater is not working with the add-on linker? It does for me - it sees the symlink in the community folder and treats it as if the actual scenery was there. Link to comment Share on other sites More sharing options...
Beat578 32 Posted March 31, 2021 Share Posted March 31, 2021 What I saw is, that whan you have your scenery in another folder and use the scereny add-on linker, sometimes an update would create a new folder with all files in it, that replaces the symlink folder with a "real" one. Just copy that new folder to your add-on scenery place and overwrite everything and then create a new link with the add-on linker tool. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted March 31, 2021 Deputy Sheriffs Share Posted March 31, 2021 Yes, the AS Update will remove a symbolic link you have in your "Community" folder, create a new folder and place the updated files in it. As described by Beat578 you need to move that newly created folder above the source folder of the add-on. As nice tools like the MSFS Add-On Linker are (I use it myself to manage the 350 GB of add-ons I have), but you really need to know what you are doing. You must be aware, that add-on installers/updaters do not take any such tools into consideration, but assume to be in the "Community" folder, and nowhere else. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.