airbus lover 380 1 Posted March 20, 2021 Share Posted March 20, 2021 hey guys i just got the crj 550/700 for fs2020 and i put my flaps down to 1% 8 % or 20 % to take off and i pull back on my yoke and it wont takeoff cause its saying config flaps and i did that but it will not takeoff if anyone can help me with this issue please let me know thanks from airbus lover 380 Please login to display this image. Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 20, 2021 Author Share Posted March 20, 2021 here is a link to the video i created of the issue in case you guys need more info https://drive.google.com/file/d/1ZzkEQi0KvkbHe0VcY2EgJhiKUwgDiV4q/view?usp=sharing Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 20, 2021 Share Posted March 20, 2021 It's good that I found someone who's the same thing that happens to me, let's hope they give us a solution because I have the same problem, I've tried everything and it doesn't take off Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 20, 2021 Author Share Posted March 20, 2021 same here Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 20, 2021 Share Posted March 20, 2021 4 minutes ago, airbus lover 380 said: aquí igual If you find the solution, let me know, I'll do the same, because I don't know if they will answer us. Link to comment Share on other sites More sharing options...
Crabby 28 Posted March 20, 2021 Share Posted March 20, 2021 it says your parking break is on? What did the performance page tell you to set your trim to for you given weight/balance? Link to comment Share on other sites More sharing options...
Josh Drummond 0 Posted March 20, 2021 Share Posted March 20, 2021 hmmmmm, might wanna check the words written in red! Link to comment Share on other sites More sharing options...
Crabby 28 Posted March 20, 2021 Share Posted March 20, 2021 In the video, the shot of the center panel clearly showed the parking break on too. Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 20, 2021 Author Share Posted March 20, 2021 crabby i had the park brake on so i can screen shot the flaps issue and il take a look at the performance page tomorrow i have to go for the night Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted March 20, 2021 Share Posted March 20, 2021 5 hours ago, airbus lover 380 said: crabby i had the park brake on so i can screen shot the flaps issue and il take a look at the performance page tomorrow i have to go for the night In your screen shot the flaps show at position “1” (slats only) not position “8”, which would definitely cause the red “config flaps” warning. Do you get the message if the flaps are verified to be in position 8 or 20? If not, and the aircraft still will not take off, go to your MSFS settings menu and insure that the “flight model” setting is “modern” not “legacy”. Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 20, 2021 Author Share Posted March 20, 2021 i do put it at position 8 and 20 and the issue still comes up Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 20, 2021 Author Share Posted March 20, 2021 just fixed my issue it was my trim all along so every one can feel free to disregard this post thanks for everyone's help Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 21, 2021 Share Posted March 21, 2021 11 hours ago, airbus lover 380 said: just fixed my issue it was my trim all along so every one can feel free to disregard this post thanks for everyone's help I don't understand, how did you solve it? Link to comment Share on other sites More sharing options...
Chaxterium 119 Posted March 21, 2021 Share Posted March 21, 2021 The trim needs to be within a certain setting. It needs to be green. Link to comment Share on other sites More sharing options...
Lloyd Morris 2 Posted March 21, 2021 Share Posted March 21, 2021 Just something to note on this subject, if you set your flaps with a flap lever (axis) on your throttle instead of a switch/button, the flap handle in the aircraft moves but the flaps themselves don’t. So you will see the incorrect flaps config warning on takeoff even though the flap handle is set at 8. Just a heads up. Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 21, 2021 Share Posted March 21, 2021 1 hour ago, Chaxterium said: The trim needs to be within a certain setting. It needs to be green. I have everything in green even so it does not take off, I hope that the friend airbus lover 380 explains to me what he did to solve the problem Link to comment Share on other sites More sharing options...
airbus lover 380 1 Posted March 21, 2021 Author Share Posted March 21, 2021 what i did was looked at the proformance menu and saw that it needed to be 7.2 and it was 6.1 i moved it to 7.2 and it works Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 21, 2021 Share Posted March 21, 2021 31 minutes ago, airbus lover 380 said: what i did was looked at the proformance menu and saw that it needed to be 7.2 and it was 6.1 i moved it to 7.2 and it works I did that but nevertheless the plane does not take off Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted March 21, 2021 Share Posted March 21, 2021 39 minutes ago, Alejandro Roldan said: I did that but nevertheless the plane does not take off If your aircraft refuses to take off no matter how fast you are going or how hard you pull on the yoke, it is because the “flight model” parameter in the MSFS main settings menu is set to “legacy”. It must set to “modern”. MSFS itself sometimes changes this setting for no apparent reason. Link to comment Share on other sites More sharing options...
Alejandro Roldan 2 Posted March 21, 2021 Share Posted March 21, 2021 26 minutes ago, JRBarrett said: If your aircraft refuses to take off no matter how fast you are going or how hard you pull on the yoke, it is because the “flight model” parameter in the MSFS main settings menu is set to “legacy”. It must set to “modern”. MSFS itself sometimes changes this setting for no apparent reason. Fantastic, Yes!! was that, thank you very much !!! Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted March 21, 2021 Aerosoft Share Posted March 21, 2021 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.