Caribbean_Redz 21 Posted January 29, 2021 Share Posted January 29, 2021 On 1/25/2021 at 7:57 PM, ahadhiri said: That looks fantastic .. and it couldn't be a better timing also! I'm currently working on a personal project to add a layer of automation to HOPPIE. At the current state, the system supports automatic logon and would respond to PDC requests automatically (in a CPDLC Msg). The PDC clearance would contain the departure runway taken from the current ATIS, the ground and departure freq (if exists) from AIRAC and still working on the SID. Next would be the automatic Oceanic clearance delivery and then add more support for other types of requests. The motivation behind this work comes from the fact that most of the time , no stations are available on hoppie to process our requests, and also people who don't fly VATSIM would not be able to use CPDLC capabilities of the upcoming A333 or the already available FSLABS A320, so the idea is to make CPDLC accessible for everyone. To start/stop a station with automatic capabilities, just send a free text to AUTOPS station as in the screenshot and the station would become alive after a 60 sec maximum delay. "START EDDF A." would start EDDF and the A stands for the station type (A: airport, C:center, O: Oceanic) . if none specified than it defaults to A: airport. It has no effect for now, but in the future , it would define which messages a station can handle for added realism (ex. an Airport facility will not process Oceanic Clearances or CLIMB TO requests ). Please feel free to test the system and provide feedback or requests. If you have special CPDLC message formats that you use for the A333, I'll be happy to add them to the system. Also, do you think we can cooperate on the oceanic clearance? Let me explain: the idea is to make the A330 seamlessly append the flight plan or at least the oceanic part of it from the FMGS to the OCX http POST request (the pilot won't see it in the DCDU). This would be read by the oceanic station and used to deliver an accurate automatic clearance. The same mechanism would be used to reply to the newly introduced CONFIRM ASSIGNED ROUTE message in the oceanic airspace. An alternative would be to make the user upload his callsign/flightplan to a webpage created for this purpose before the flight . Please Let me know if that would be possible or if you have better ideas. Last thing, this is going to be a free service and will always be. Sorry for the lengthy message! Amine. Please login to display this image. Hello Amine, I was attempting to try this, but I have no idea where to go - nothing that I see you have showing up on my MCDU. Link to comment Share on other sites More sharing options...
Caribbean_Redz 21 Posted January 31, 2021 Share Posted January 31, 2021 On 1/29/2021 at 11:19 PM, Alex97490 said: All time I click print on the CPDLC (clearance, message ect...) my sim p3d v4.5 crash I can confirm this, my sim is the same up-to-date p3d v4.5 crashes. Link to comment Share on other sites More sharing options...
HB-JHM 20 Posted January 31, 2021 Share Posted January 31, 2021 vor 13 Stunden , Caribbean_Redz sagte: I can confirm this, my sim is the same up-to-date p3d v4.5 crashes. same here with P3D4.5 - it crashes when I click print (A330 update 1.0.4.1 installed) Link to comment Share on other sites More sharing options...
Kerem Cam 1 Posted January 31, 2021 Share Posted January 31, 2021 On 1/29/2021 at 10:19 PM, Alex97490 said: All time I click print on the CPDLC (clearance, message ect...) my sim p3d v4.5 crash Can confirm, i have CTD's too on P3D v5.1 HF1. And also we really need a manual about CPDLC system. Link to comment Share on other sites More sharing options...
D4rkness 0 Posted January 31, 2021 Share Posted January 31, 2021 is there a tutorial or written document on how to use the cpdlc in the a330? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted February 1, 2021 Deputy Sheriffs Share Posted February 1, 2021 13 hours ago, D4rkness said: is there a tutorial or written document on how to use the cpdlc in the a330? Until then: Link to comment Share on other sites More sharing options...
D4rkness 0 Posted February 1, 2021 Share Posted February 1, 2021 On 1/28/2021 at 5:36 PM, jeffg said: Never mind I did some googling and found a A330 manual that explains how it works. JeffG could you send me the manual you've found? Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 1, 2021 Deputy Sheriffs Share Posted February 1, 2021 Hello guys, The printer issue is known. We are looking into it this week. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 2, 2021 Deputy Sheriffs Share Posted February 2, 2021 Question to people that have experienced MCDU freeze after the update. Have you experienced the MCDU freezing only after trying to print something? We are trying to figure out if the MCDU freeze is connected to the printed (sometimes just freeze, sometimes CTD) or if it's an isolated issue from the printer. We have been able to recreate issues with the printer so far but no luck trying to recreate the MCDU freeze without using the printer. If you do experience the MCDU freeze without using the printer, please zip the Data folder inside your A330 installation folder and send it to us. This folder contains important log files that we need to debug this issue. Link to comment Share on other sites More sharing options...
olschelsea8 51 Posted February 2, 2021 Share Posted February 2, 2021 Data zip attached 330.zip Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 2, 2021 Deputy Sheriffs Share Posted February 2, 2021 15 minutes ago, olschelsea8 said: Data zip attached 330.zip 117.22 kB · 0 downloads Any extra information? Did it freeze without pressing the print button? What page did it freeze on? At what stage did it freeze on? Link to comment Share on other sites More sharing options...
ahadhiri 2 Posted February 3, 2021 Share Posted February 3, 2021 Hi Secondator, I don't have the PRINT issue, but I can confirm that the FMGS can freeze occasionally. it did it three time till now. Unfortunately, i didn<t know that the cpdlc.log is erased every time you restart the sim so lost all the info in there . I'll keep testing and let you know. Amine. Link to comment Share on other sites More sharing options...
olschelsea8 51 Posted February 3, 2021 Share Posted February 3, 2021 Yes both froze towards the end of the flight. DCDU was on and both were on the FP pages. I had printed out a CPDLC clearance earlier with no issue but later during the flight from CYUL-KLAX, had to do an emergency landing in KLAS because both systems were frozen. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 3, 2021 Deputy Sheriffs Share Posted February 3, 2021 We are planning to release an update early next week that hopefully solves this MCDU freeze. Until then I advise you don't use the printer during your flights. Also, if you experience the MCDU freeze again without using the printer at all during the flight, please let us know. We are particularly interested if this freeze is related to the use of printer or if it's separated from the use of printer. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 4, 2021 Deputy Sheriffs Share Posted February 4, 2021 Hi guys, For users who are experiencing MCDU freeze issue with the CPDLC, could you please try these files and give us some feedback if they work or not. Remember to backup the original files first just in case. Also if you still experience the MCDU freezing, remember to include log files (zip the whole Data folder and send it here). CPDLC_Build.zip Link to comment Share on other sites More sharing options...
Jori 4 Posted February 5, 2021 Share Posted February 5, 2021 Mine says WAITING FOR DATA, then say NO ATC DLK. I've tried everything I can think of. I have P3Dv5.1 Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 5, 2021 Deputy Sheriffs Share Posted February 5, 2021 1 hour ago, Jori said: Mine says WAITING FOR DATA, then say NO ATC DLK. I've tried everything I can think of. I have P3Dv5.1 I am not sure if I understand correctly but these are the standard indication on DCDU when no messages have been exchanged with ATC. The "NO ATC DLK" goes away when you logon to ATC station. Or does it not for you? Link to comment Share on other sites More sharing options...
patrick-tau 0 Posted February 6, 2021 Share Posted February 6, 2021 Hi, I have a question. How can I integrate the Hoppie ACARS into the A318 to A330? Is there a manual for that? If it doesn't work, is there another ACARS for where it works? Thanks in advance. greetings I use P3dV5.1 Link to comment Share on other sites More sharing options...
Bernd E. 103 Posted February 6, 2021 Share Posted February 6, 2021 vor 5 Stunden , patrick-tau sagte: Hi, I have a question. How can I integrate the Hoppie ACARS into the A318 to A330? Is there a manual for that? If it doesn't work, is there another ACARS for where it works? Thanks in advance. greetings I use P3dV5.1 Hoppie Acars is currently only implemented into the A330. If and when it will come to A31x and A32x we will see :) Link to comment Share on other sites More sharing options...
Caribbean_Redz 21 Posted February 6, 2021 Share Posted February 6, 2021 2 minutes ago, Bernd E. said: Hoppie Acars is currently only implemented into the A330. If and when it will come to A31x and A32x we will see 5 hours ago, patrick-tau said: Hi, I have a question. How can I integrate the Hoppie ACARS into the A318 to A330? Is there a manual for that? If it doesn't work, is there another ACARS for where it works? Thanks in advance. greetings I use P3dV5.1 yes, they mentioned this in an earlier post. Link to comment Share on other sites More sharing options...
Caribbean_Redz 21 Posted February 6, 2021 Share Posted February 6, 2021 On 2/4/2021 at 4:10 PM, Secondator said: Hi guys, For users who are experiencing MCDU freeze issue with the CPDLC, could you please try these files and give us some feedback if they work or not. Remember to backup the original files first just in case. Also if you still experience the MCDU freezing, remember to include log files (zip the whole Data folder and send it here). CPDLC_Build.zip 776.22 kB · 13 downloads Just a report, I was able to actually go through and click the print, and the sim didn't freeze or CTD. Regards, EDIT: just after typing this, the MCDU froze lol... spoke too soon. Data.zip Link to comment Share on other sites More sharing options...
safakcayli 0 Posted February 7, 2021 Share Posted February 7, 2021 Hi , For the CPDLC report page will be implament ? Because when we first contact atc req position req. Thanks Şafak Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 8, 2021 Deputy Sheriffs Share Posted February 8, 2021 On 2/7/2021 at 1:30 AM, Caribbean_Redz said: Just a report, I was able to actually go through and click the print, and the sim didn't freeze or CTD. Regards, EDIT: just after typing this, the MCDU froze lol... spoke too soon. Data.zip 77.91 kB · 2 downloads Thanks for the report and the logs. We are checking this now. Link to comment Share on other sites More sharing options...
Caribbean_Redz 21 Posted February 8, 2021 Share Posted February 8, 2021 1 minute ago, Secondator said: Thanks for the report and the logs. We are checking this now. No problem. Happy I could be of some help I look forward to using this cool feature. Link to comment Share on other sites More sharing options...
Choobe 33 Posted February 9, 2021 Share Posted February 9, 2021 13 hours ago, Caribbean_Redz said: No problem. Happy I could be of some help I look forward to using this cool feature. Thanks for the logs! Now we are finally able to reproduce and fix this issue! Glad to say the update is coming soon! Link to comment Share on other sites More sharing options...
![Aerosoft Team [Inactive Account]](https://forum.aerosoft.com/uploads/monthly_2023_09/Aerosoft_Social_Media_Profilbild_Neu23.thumb.jpg.03721825e6a434ed4af0c8b2b73a5898.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.