pd_gaillard 0 Posted November 19, 2020 Share Posted November 19, 2020 Dear support, I have an issue since my last flight with the A320. A318/319 are fine. I have P3d v4 HF 3 with version 1.4.1.1 of all the Airbus serie. Once my flight plan as been inserted in the MCDU and double checked (SID, STAR, Transition, ILS), without any discontinuity, both INIT pages as well as take of datas filled, I set the FCU. What I don't understand is why the NAV button being pushed there is still a heading displayed with the vector on the ND? I tried to pull and push the knob again but nothing changed. Don't know what I'm missing here! On the PFD, it mentions "HDG" instead of "NAV" (outside of the pcitures). Please see printscreen. Thank you very much in advance for your help! Regards, Pierre. Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted November 21, 2020 Deputy Sheriffs Share Posted November 21, 2020 On 11/20/2020 at 12:01 AM, pd_gaillard said: Dear support, I have an issue since my last flight with the A320. A318/319 are fine. I have P3d v4 HF 3 with version 1.4.1.1 of all the Airbus serie. Once my flight plan as been inserted in the MCDU and double checked (SID, STAR, Transition, ILS), without any discontinuity, both INIT pages as well as take of datas filled, I set the FCU. What I don't understand is why the NAV button being pushed there is still a heading displayed with the vector on the ND? I tried to pull and push the knob again but nothing changed. Don't know what I'm missing here! On the PFD, it mentions "HDG" instead of "NAV" (outside of the pcitures). Please see printscreen. Thank you very much in advance for your help! Regards, Pierre. Please login to display this image. That is a strange hickup in the bus. I have it also sometimes. For me that looks like the initialization failed during loading. What aircraft state was that? It should be fine with reloading. Link to comment Share on other sites More sharing options...
pd_gaillard 0 Posted November 21, 2020 Author Share Posted November 21, 2020 Thank you for your help. This time it was loaded in turnaround state and i went again in the options to reselect the turnaround state to make sure the checklist flow works properly. I noticed that when I don't select the aircraft state the checklist is totally messed up. Thanks, Pierre. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted November 22, 2020 Deputy Sheriffs Share Posted November 22, 2020 yes, the Checkliste need a defined state to start. Else they won’t work. Link to comment Share on other sites More sharing options...
pd_gaillard 0 Posted November 22, 2020 Author Share Posted November 22, 2020 Thanks! So what do you mean by "reloading"? Reload the scenario itself from scratch or the aircraft state only? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4161 Posted November 22, 2020 Deputy Sheriffs Share Posted November 22, 2020 Aircraft state only is enough. Link to comment Share on other sites More sharing options...
SeaJunk 8 Posted November 25, 2020 Share Posted November 25, 2020 Just happened to me. You can fix it by setting a direct waypoint (DIR) after takeoff. You just have to put up with the green nav line until then On this flight I forgot to set Load/Fuel until after INITA and the flightplan. Could be coincidence. Link to comment Share on other sites More sharing options...
pd_gaillard 0 Posted November 25, 2020 Author Share Posted November 25, 2020 Thank you! Setting a DIR after take-off is what I did to "fix" temporarly the issue but I would like to fix it once for good! Both my INIT pages were correct and flightplan all set. Link to comment Share on other sites More sharing options...
pd_gaillard 0 Posted December 6, 2020 Author Share Posted December 6, 2020 On 11/22/2020 at 5:21 PM, mopperle said: Aircraft state only is enough. That works perfectly! Thanks! Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4161 Posted December 6, 2020 Deputy Sheriffs Share Posted December 6, 2020 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.