Marshall01 17 Posted January 9, 2021 Author Share Posted January 9, 2021 10 hours ago, lildave74 said: I read a lot on these forums but have yet to ever reply to anything, I just find answers to problems I may be having, But come on I am having the same issue as everyone else the a330 is a great plane they have kept it updated to the current standards and the only issue is with pro atc x,Which has not been updated for what 3 maybe 4 years now its been awhile,And still cost 46 bucks, So not pointing fingers at anyone maybe we should be asking those folks to bring there product up to the current standards its not free to use either, Anyway just saying. Best Regards The pro atc x forum announced in December that a new version is in the process of BETA. Link to comment Share on other sites More sharing options...
krielkip 7 Posted January 11, 2021 Share Posted January 11, 2021 I have a solution for PRO-ATC-X communication in the A330. Go to options in P3D and to key assignments. Look for Com1 radio (transmit) and assign a key to it. I use the "O". When you have loaded the A330 set the right frequency in com 1 and press the assigned key. Then press key nr. 1 for Pro-Atc. Maybe you need to switch between the 2 frequensies and press the assigned key again. I had the same problem with Captain Sim B757. Regards, Hans Link to comment Share on other sites More sharing options...
ARF7415 0 Posted January 11, 2021 Share Posted January 11, 2021 25 minutes ago, krielkip said: J'ai une solution pour la communication PRO-ATC-X dans l'A330. Accédez aux options de P3D et aux affectations de clés. Recherchez la radio Com1 (émission) et attribuez-lui une touche. J'utilise le "O". Lorsque vous avez chargé l'A330, réglez la bonne fréquence dans com 1 et appuyez sur la touche attribuée. Appuyez ensuite sur la touche nr. 1 pour Pro-Atc. Vous devez peut-être basculer entre les 2 fréquences et appuyer à nouveau sur la touche attribuée. J'ai eu le même problème avec Captain Sim B757. Cordialement, Hans Good evening, well done for your solution, I tested it and it works for me. Very good evening to you and happy new year, good health. Regards, Link to comment Share on other sites More sharing options...
krielkip 7 Posted January 12, 2021 Share Posted January 12, 2021 18 hours ago, ARF7415 said: Good evening, well done for your solution, I tested it and it works for me. Very good evening to you and happy new year, good health. Regards, Thanks. Happy flying. Regards, Hans Link to comment Share on other sites More sharing options...
krielkip 7 Posted January 12, 2021 Share Posted January 12, 2021 On 1/4/2021 at 9:25 PM, masterhawk said: Deactivate the radio support by copilot and tune the radios yourself in the virtual cockpit. Please login to display this image. Look for my solution of this problem on page 4! Regards, Hans Link to comment Share on other sites More sharing options...
krielkip 7 Posted January 12, 2021 Share Posted January 12, 2021 On 12/16/2020 at 5:03 PM, masterhawk said: According my last info it was only the ATC-Pro Problem? Therefor we had to ask the dev of the tool. The other problems should be solved with latest experimental update. I have a solution for PRO-ATC-X communication in the A330. Go to options in P3D and to key assignments. Look for Com1 radio (transmit) and assign a key to it. I use the "O". When you have loaded the A330 set the right frequency in com 1 and press the assigned key. Then press key nr. 1 for Pro-Atc. Maybe you need to switch between the 2 frequensies and press the assigned key again. I had the same problem with Captain Sim B757. Regards, Hans Link to comment Share on other sites More sharing options...
fernandito1969 9 Posted January 12, 2021 Share Posted January 12, 2021 @krielkip....Yes Sir!...That remedy did worked here in my system!..Awesome!. Thanks for sharing that info! Att. FRL Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted January 12, 2021 Deputy Sheriffs Share Posted January 12, 2021 Very nice find Hans! We'll check this on our side as well just in case there is something more permanent we can do. However cannot give any promises right now. But thanks again for the find, helps us a lot where to look at least. Link to comment Share on other sites More sharing options...
lildave74 3 Posted January 13, 2021 Share Posted January 13, 2021 Yes Thank You works perfect just a matter of pressing a key Thanks agin Link to comment Share on other sites More sharing options...
ALESSIOTOLU 4 Posted January 18, 2021 Share Posted January 18, 2021 For me not working. Still wait an official update for fix . Thanks Link to comment Share on other sites More sharing options...
Hansi Bamson 1 Posted January 30, 2021 Share Posted January 30, 2021 @krielkipYou have been officially added to my list of heroes!!! Link to comment Share on other sites More sharing options...
ALESSIOTOLU 4 Posted February 2, 2021 Share Posted February 2, 2021 in the last hotfix do you solved the issues of the radio panel or not aerosoft ?? Link to comment Share on other sites More sharing options...
ALESSIOTOLU 4 Posted February 10, 2021 Share Posted February 10, 2021 Thanks aerosoft for the reply! Link to comment Share on other sites More sharing options...
chrisal 5 Posted February 10, 2021 Share Posted February 10, 2021 3 hours ago, ALESSIOTOLU said: Thanks aerosoft for the reply! I'm pleased for you. What was the reply? Cheers Chris Link to comment Share on other sites More sharing options...
atesz76 2 Posted February 10, 2021 Share Posted February 10, 2021 We were waiting the new update. You promised monday or tuesday . We are not pleased . R, A Link to comment Share on other sites More sharing options...
ALESSIOTOLU 4 Posted February 11, 2021 Share Posted February 11, 2021 From 2 february when i asked for the miss solved aerosoft not response for my question But we payed for all product And for the support ? Why aerosoft not help we ? All a330s are down for we because out radio not working with pro atc x In all posting in everything else aerosoft support In this post aerosoft not support Very thanks Can we have our money back? Link to comment Share on other sites More sharing options...
ALESSIOTOLU 4 Posted February 11, 2021 Share Posted February 11, 2021 20 hours ago, chrisal said: Sono contento per te. Qual è stata la risposta? Saluti Chris My is ironic post. Because aerosoft not response for my last question my friend Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 12, 2021 Deputy Sheriffs Share Posted February 12, 2021 Hi guys, We have looked into this issue extensively and unfortunately have not found a way to get Pro-ATC to work from our side. The thing is that our Aircraft uses the latest P3D SDK features and while we try to maintain compatibility with as many 3rd party products as possible it's not always possible if the 3rd party product is not using the same features. The last update for Pro-ATC is already nearly 3 years old which is from time even before P3Dv5. It's simpyl not possible for us to check and ensure compatibiltiy with every 3rd party product there is, especially if these 3rd party projects are not getting updates to support the latest features of P3D. That would mean that we cannot go forward with our product. I know it's not something that you want to hear but we have tried all that we can from our side to get this issue sorted. Unfortunately it looks like it's not possible for us to solve this issue and it would require an update from Pro-ATC side. We'll however keep our eyes and ears open in case we suddenly find something that we could do to help with this issue. As a workaround, you can use the COM1 RADIO (TRANSMIT) keybind and you should get Pro-ATC work for your flight. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.