mseder 11 Posted October 5, 2020 Share Posted October 5, 2020 Hi By some strange reason the Ctrl+J doesn't work for my FSX installation. I reinstalled the product plus the patch for jetways downloaded from aerosoft No change. GSX 2 says "no jetway" standing at gate 532 or other gates. What is missing? Any BGL-files I should look for? Mats Sederholm Link to comment Share on other sites More sharing options...
data63 421 Posted October 5, 2020 Share Posted October 5, 2020 check if GSX is referencing to the correct AFCAD by using the "customze Airport" function Link to comment Share on other sites More sharing options...
mseder 11 Posted October 5, 2020 Author Share Posted October 5, 2020 The first gate (532) I tried had a jetway, visually, but it wasn't defined and available for GSX so that one is solved I then tried the next gate 533 which is defined as having a jetway in GSX. When operate jetway from GSX, GTX thinks it works properly but the gate is not moving. The customize airport page says that gate has 1 BGL jetway. I though can't find a reference to a specific BGL-file-name there. Then I tried a series of heavy gates for this (QW787) and started to see a pattern. All gates are defined as having a BGL jetway in GSX but only those that visually has more than one jetway actually moves, with GSX or Ctrl-J Link to comment Share on other sites More sharing options...
mseder 11 Posted October 5, 2020 Author Share Posted October 5, 2020 Sorry that pattern i mentioned is not correct either. Some heavy gates works regardless of No jetways and some don't simply. Link to comment Share on other sites More sharing options...
data63 421 Posted October 6, 2020 Share Posted October 6, 2020 again: did you check that GSX is referencing the right AFCAD file - the path and filename are shown in the GSX edit airport menu 1 Link to comment Share on other sites More sharing options...
mseder 11 Posted October 13, 2020 Author Share Posted October 13, 2020 On 10/6/2020 at 7:55 PM, data63 said: again: did you check that GSX is referencing the right AFCAD file - the path and filename are shown in the GSX edit airport menu The only reference on google to what you call "edit airport menu" is your post here. Please Juergen explain" See "my world" in the attached images Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
mseder 11 Posted October 14, 2020 Author Share Posted October 14, 2020 On 10/6/2020 at 7:55 PM, data63 said: again: did you check that GSX is referencing the right AFCAD file - the path and filename are shown in the GSX edit airport menu Maybe what you're after is something for P3D users, I don't know In addition to the other images this is my GSX Menu Please login to display this image. Link to comment Share on other sites More sharing options...
data63 421 Posted October 14, 2020 Share Posted October 14, 2020 the upper one is the screen I meant - it shows you're using the AFCAD inside the Heathrow pro folder so far so good. try renaming the "egll-ifikxx.ini" file referenced in them second section (above) Gate 555/J with the FS NOT running and restart Link to comment Share on other sites More sharing options...
mseder 11 Posted October 15, 2020 Author Share Posted October 15, 2020 The file itself was renamed, which is now visible in the menu after restart. The gate e.g. 533 still doesn't move while some others are, just like before. I'm using the built-in 747 Hmm, actually, looking from the cockpit closely on the jetway it seem to just slightly vibrate after a Ctrl-J and then stopped after a second. Link to comment Share on other sites More sharing options...
data63 421 Posted October 15, 2020 Share Posted October 15, 2020 I do not have FSX (SE) active any more but the files are somewhere on my PC - I'll try to have a look into that AFCAD this weekend Link to comment Share on other sites More sharing options...
mseder 11 Posted October 15, 2020 Author Share Posted October 15, 2020 Thanks a lot!! Link to comment Share on other sites More sharing options...
mseder 11 Posted October 17, 2020 Author Share Posted October 17, 2020 And I have the fsx patch for jetways on Mega London extended installed Link to comment Share on other sites More sharing options...
data63 421 Posted October 17, 2020 Share Posted October 17, 2020 I checked the AFCAD on this location - looks ok! from my side - as you saw some movement from the CTRL-M Jetway try 2 things 1) position that 747 a bit more fore- or backward - maybe it's "out of reach" for the jetway 2) what if you use CTRL-J to move the jetway instead of GSX? Link to comment Share on other sites More sharing options...
mseder 11 Posted October 18, 2020 Author Share Posted October 18, 2020 19 hours ago, data63 said: position that 747 a bit more fore- or backward - maybe it's "out of reach" for the jetway Yes that was it. I now has repositioned the default parking pos in GSX and added a second jetway as well. The first one driven by Ctrl-J and the second by GSX Thanks for your attention Juergen Link to comment Share on other sites More sharing options...
westdakota96virtualTB1 0 Posted May 15, 2022 Share Posted May 15, 2022 On 10/17/2020 at 10:25 AM, mseder said: And I have the fsx patch for jetways on Mega London extended installed do you still have that fsx patch for Jetways on Mega London Extended if you do can i have those files please Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now