Jump to content

FF A320 Update 1.0.7


Recommended Posts

Hallo, @Heinz Flichtbeil

 

wollte mal fragen wann im Kundenkonto die Version 1.0.7 des Flight Factor A320 Ultimate zum Download bereit steht. 

Ebenfalls wurde gestern die Beta Version 1.0.8 released mit Vulcan Driver Support.

 

Gruß Sven

PS: Hier die Changelogs falls die jemanden interessieren:

A320 1.0.7 RELEASE version published. This is the cumulative version with fixes from beta versions from 1.0.2 to 1.0.6. Full list bellow:
 
    Fixes:
    * Inoperable EFB in some cases
    * Different multi-monitor panels and render issues
    * Rudder trim stuck after -20deg
    * Render in OGL mode on X-Plane 11.50
    * AMU CAB light flash
    * ISIS position saving
    * Hiding panels by click on 2D and 3D cockpit panels
    * Increased takeoff and taxi lights intensity
    * APU start in flight after dual engine failure
    * Saving standard and popout panels configuration
    * Panels resizeing
    * Possible windows positioning out of visible area
    * Multi-monitor support for different cockpit interaction modes
    * Keyboard input into EFB in 2D window mode
    * Auto CabinReady set in the begining of running before takeoff
    * Multi-monitor configurations support
    * Windows resize in pop-out mode
    * Applying X-Plane UI scaling for new windows

Link to comment
Share on other sites

I talk with the Flight Factor Team and they told me that when they launch the update they automatically send the update to Aerosoft and X-store. It's insane that a very expensive product is outdated on your page and from X-store.org are updated immediately. You guys was the best company to buy products but now I regret. Out version is 1.0.8 and your company has 1.0.6.

Link to comment
Share on other sites

  • Deputy Sheriffs
18 minutes ago, julianpr1991 said:

I talk with the Flight Factor Team and they told me that when they launch the update they automatically send the update to Aerosoft and X-store. It's insane that a very expensive product is outdated on your page and from X-store.org are updated immediately. You guys was the best company to buy products but now I regret. Out version is 1.0.8 and your company has 1.0.6.

It sometimes just take some time. Right before the weekend there was just enough time. And internal testing and uploading and changing of website takes all its time.

So just be patient.

And follow on please in german. This is the German forum section. 

Link to comment
Share on other sites

  • Administrator

Hallo,

 

Bitte hier im deutschen Forum nur in deutsch posten (korrekt, was masterhawk schrieb).

(please post only in german here in the german forum!)

 

Nicht in englisch oder einer anderen Sprache.

Abgesehen davon haben wir das gleiche Thema bereits im englischen Teil. Auch bereits beantwortet.

z.B.

https://forum.aerosoft.com/index.php?/topic/154473-a320-107-release-versjon-publisert-dette-er-den-kumulative-versjonen-med-fikser-fra-betaversjoner-fra-102-til-106-full-liste-bellow/&tab=comments#comment-988158

 

Vielen Dank und Gruß

heinz

Link to comment
Share on other sites

Was ist Passiert? Nach Umstellung von meinem X-Plane 11 auf 11.50 und Update vom FFA320 funktioniert kein Schalter mehr. Kein Anklicken möglich, kein Drehen oder sonstige Bedienung möglich. Rudder, Yoke und Pedale funktionieren und der Updater vom A320 wurde auch drüber laufen gelassen.

Weis jemand einen Rat?

LG Michael

Link to comment
Share on other sites

  • Administrator

Mit X-Plane 11.50 Beta muss der A320 Ultimate v 1.08 installiert werden (und auch den CEF Ordner aktualisieren). Aber wie beschrieben ist die v1.08 auch noch im Beta Stadium.

Da kann es naturgemäß Probleme geben....

Ich teste das hier auch einmal.....

 

Link to comment
Share on other sites

  • Administrator

So, habe es mal getestet.

Läuft hier ohne Probleme.

XP11.50b13

A320 Ultimate v 1.08 beta (allerdings aus unserem Aerosoft Shop als neue Vollversion installiert und aktiviert).

CEF Ordner im plugins Ordner auch ausgetauscht.

Windows 10 und alle C++ 64bit Bibliotheken von Microsoft installiert.

 

Gruß heinz

 

Link to comment
Share on other sites

Hallo,

 

Habe heute Nachmittag das Update Flightfactor A320 ultimate von meinem Konto heruntergeladen, Version 1.07.

 

In der Datei \Flightfactor A320 ultimate\data\version.ini ist als mögliche Versionsnummer 1.0.8-2422 gespeichert.

Wird die Version 1.07. wohl sein?

Denn beim Laden des Programms  mit dem Flugzeug Flightfactor A320 ultimate wird die Versionsnummer, bei der neuen Version 1.07

bei mir auch nach der Aktivierung nicht angezeigt, sowie bei der vorherigen Version 1.01 .

Habe allerdings schon einen Flug mit dem Airbus absolviert (EDLP-EDDT), soweit  i.O..

 

Gruß

FW_R

 

Link to comment
Share on other sites

  • Administrator

Wir haben die Daten noch einmal neu heruntergeladen und in die Kunden Konten hochgeladen. 

In der v1.07 steht nun auch v1.07-2419.

Danke nochmal für den Hinweis (FW_R).

Wer also bei der v1.07 in der Version.ini Datei im data Ordner 1.0.8 ... stehen hat, einfach nocheinmal die v1.07 herunterladen....

Wenn die Beta Version 1.08 aber funktioniert, kann man das natürlich auch so lassen ...  

Gruß heinz

 

Link to comment
Share on other sites

  • Administrator
vor 14 Stunden , Klemmutzki sagte:

Bei mir funktioniert der A320 1.08 nicht mit aktuellem Beta XP 11.50b13

beim laden stürzt der Flusi ab...

Das würde ich dann an FlightFactor melden. Und die Log.txt mitsenden. v1.0.8 ist ja eben noch im Beta Stadium...

 

Link to comment
Share on other sites

  • 3 weeks later...

Hallo Zusammen,

ich habe auch das 1.08Beta installiert.
Alles funktioniert, bis auf das TCAS. Online sehe ich keine anderen Flieger im Display.
Hat jemand das gleiche Problem?
Gruß Lothar
(In meiner NOT fliege ich schon die Toliss A319) 😉

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use