dbw 4 Posted July 3, 2020 Share Posted July 3, 2020 Please login to display this image. This is my panel. Not sure why it's doing this. Any thoughts? Also, had a CTD. Download appeared to go normal. Dave Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted July 3, 2020 Share Posted July 3, 2020 In your Prepar3d.cfg file, make sure the following settings exist: COCKPIT_HIGH_LOD=1 (not “=0”) MAX_VC_TEXTURE_RESOLUTION=4096 (not “2048” or “1024”) If you came close to running out of VRAM on a previous flight (not necessarily in the CRJ-Pro), P3DV5 HF1 or HF2 might have automatically reduced one or both of the above settings in an attempt to prevent a crash caused by VRAM exhaustion. Unfortunately, once that happens, it then gets saved in the cfg file, and you then have to manually edit the file to put the settings back to the correct values. I believe this could also could happen if certain font files needed by the CRJ are not installed during the initial installation of the aircraft. Possibly that could happen if the installer was not run as administrator, or if your antivirus software was active when you installed the CRJ. There should be 4 files in C:\Windows\Fonts that all start with the letters “DA” - two for the FMS, one for the display, and one for the HGS (head-up guidance display). Link to comment Share on other sites More sharing options...
dbw 4 Posted July 3, 2020 Author Share Posted July 3, 2020 Thanks for the suggestion. I checked and both settings are as you suggest. Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted July 3, 2020 Share Posted July 3, 2020 3 minutes ago, dbw said: Thanks for the suggestion. I checked and both settings are as you suggest. I just edited the topic with some additional information about required font files. Might want to check those as well. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 3, 2020 Developer Share Posted July 3, 2020 The settings that JRBarrett mentioned are correct. I'm not aware of anything else that could cause this problem. Link to comment Share on other sites More sharing options...
dbw 4 Posted July 3, 2020 Author Share Posted July 3, 2020 6 hours ago, Hans Hartmann said: The settings that JRBarrett mentioned are correct. I'm not aware of anything else that could cause this problem. Regardless, it is present. Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted July 3, 2020 Share Posted July 3, 2020 52 minutes ago, dbw said: Regardless, it is present. Are you 100 percent sure that the four required font files (that begin with the letters “DA” ) are present in the C:\Windows\Fonts folder? Link to comment Share on other sites More sharing options...
dbw 4 Posted July 3, 2020 Author Share Posted July 3, 2020 59 minutes ago, JRBarrett said: Are you 100 percent sure that the four required font files (that begin with the letters “DA” ) are present in the C:\Windows\Fonts folder? Thank you for the reply. Yes, they are present. DA FMS Font Regular DA FMS Font Small Regular DACRJDisp Regular DACRJHGS Normal Note: when clicking on the panels to bring up a 2d display they are normal. Heads up display is normal. Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted July 3, 2020 Share Posted July 3, 2020 32 minutes ago, dbw said: Thank you for the reply. Yes, they are present. DA FMS Font Regular DA FMS Font Small Regular DACRJDisp Regular DACRJHGS Normal Note: when clicking on the panels to bring up a 2d display they are normal. Heads up display is normal. I am out of ideas. My insight is gleaned from previous posts regarding this problem in the CRJ and Aerosoft Airbus. The most common fix appears to have been to insure that the setting in the config file is COCKPIT_HIGH_LOD=1. At least one Airbus customer solved it by deleting the Prepar3D.cfg file entirely, which will build a fresh copy the next time the sim is launched. If you try that, be sure to make a note of all your current sim preferred graphics settings, as you will have to restore them afterwards. When you delete the config file, on the next launch of the sim, it will load the default F35 fighter at Randolph AFB, with all the default graphics settings that were present when you first installed P3D. The config file can definitely get corrupted - especially if the sim CTDs unexpectedly. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted July 3, 2020 Deputy Sheriffs Share Posted July 3, 2020 @dbw Please run the attached tool and post the content here: ASVersionInfo.zip Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 3, 2020 Developer Share Posted July 3, 2020 vor 2 Stunden , JRBarrett sagte: At least one Airbus customer solved it by deleting the Prepar3D.cfg file entirely I noticed today that my Prepar3D.cfg file was corrupted (half of the file was in there twice - inserted right in the middle of a section header....). However, P3D loaded it just fine. @dbw please check if COCKPIT_HIGH_LOD or MAX_VC_TEXTURE_RESOLUTION is in there more than once. If it is, please follow JRBarrett's advice and delete the Prepar3d.cfg (create copy of the file first, if you wish). Link to comment Share on other sites More sharing options...
dbw 4 Posted July 3, 2020 Author Share Posted July 3, 2020 4 hours ago, mopperle said: @dbw Please run the attached tool and post the content here: ASVersionInfo.zip 13.11 kB · 1 download Greetings, I just sent you the results via PM. I wasn't sure about posting them publicly. My email was included. Dave Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted July 4, 2020 Deputy Sheriffs Share Posted July 4, 2020 you can post them publicly, no secrets in it Link to comment Share on other sites More sharing options...
dbw 4 Posted July 4, 2020 Author Share Posted July 4, 2020 6 hours ago, mopperle said: you can post them publicly, no secrets in it Hardware -------- CPU Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz GPU NVIDIA GeForce RTX 2080 (3440 x 1440 x 4294967296 colors) GPU Driver 445.87 RAM 32GB @ 2667MHz Microsoft Windows ----------------- Windows 10 Post April 2020 (2004) Update 64-bit User Profile and Document Folders --------------------------------- User Profile Location: Environment.GetFolderPath = C:\Users\Dave Volatile Environment\USERPROFILE = C:\Users\Dave Documents Folder: Environment.GetFolderPath = E:\Dave\Documents Shell Folders\Personal = E:\Dave\Documents Microsoft .NET Framework 1.0 - 4.0 ---------------------------------- .NET Framework DF .NET Framework 2.0.50727 Service Pack 2 .NET Framework 3.0 Service Pack 2 .NET Framework 3.5 Service Pack 1 .NET Framework 4 .NET Framework 4.0 Microsoft .NET Framework 4.5+ ----------------------------- .NET Framework 4.7.2 or later (only latest version is shown) Microsoft Flight Simulator X & Lockheed Martin Prepar3D ------------------------------------------------------- Prepar3D v5.x (5.0.31.35253) found at: F:\Lockheed Martin\Prepar3D v5\ Prepar3D v4.x (4.5.14.34698) found at: D:\Lockheed Martin\Prepar3D v4\ Prepar3D v3.x not installed FSX Steam Edition not installed FSX SP2/Acceleration not installed X-Plane 10 & 11 --------------- X-Plane 11 locations: • E:\Dave/Desktop/X-Plane 11\ X-Plane 10 not installed Microsoft XAudio2 ----------------- XAudio2_9.dll found: 10.0.18362.1 (WinBuild.160101.0800) XAudio2_8.dll found: 10.0.18362.1 (WinBuild.160101.0800) XAudio2_7.dll found: 9.29 (DXSDK_JUN10.100602-0421) XAudio2_6.dll found: 9.28 (DXSDK_FEB10.100204-0932) XAudio2_5.dll found: 9.27 (DXSDK_AUG09.090904-1620) XAudio2_4.dll found: 9.26 (DXSDK_MAR09.090316-1354) XAudio2_3.dll found: 9.25 (DXSDK_NOV08.081027-0939) XAudio2_2.dll found: 9.24 (DXSDK_AUG08.080731-0600) XAudio2_1.dll found: 9.23 (DXSDK_JUN08.080530-1349) XAudio2_0.dll found: 9.22 (DXSDK_MAR08.080305-1539) Simconnect, SDKs and Visual C++ Redistributables ------------------------------------------------ Microsoft ESP SimConnect Client v1.0.20.0 - (Version Data: 1.0.20.0) Microsoft Flight Simulator SimConnect Client v10.0.60905.0 - (Version Data: 10.0.60905.0) Microsoft Flight Simulator SimConnect Client v10.0.61242.0 - (Version Data: 10.0.61242.0) Microsoft Flight Simulator SimConnect Client v10.0.61259.0 - (Version Data: 10.0.61259.0) Microsoft Visual C++ 2005 Redistributable - (Version Data: 8.0.56336.0) Microsoft Visual C++ 2005 Redistributable - (Version Data: 8.0.61001.0) Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 - (Version Data: 10.0.40219.0) Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 - (Version Data: 10.0.40219.0) Microsoft Visual C++ 2012 x64 Additional Runtime - 11.0.61030 - (Version Data: 11.0.61030.0) Microsoft Visual C++ 2012 x64 Minimum Runtime - 11.0.61030 - (Version Data: 11.0.61030.0) Microsoft Visual C++ 2013 x64 Additional Runtime - 12.0.40660 - (Version Data: 12.0.40660.0) Microsoft Visual C++ 2013 x64 Minimum Runtime - 12.0.40660 - (Version Data: 12.0.40660.0) Microsoft Visual C++ 2013 x86 Additional Runtime - 12.0.21005 - (Version Data: 12.0.21005.0) Microsoft Visual C++ 2013 x86 Minimum Runtime - 12.0.21005 - (Version Data: 12.0.21005.0) Microsoft Visual C++ 2019 X64 Additional Runtime - 14.25.28508 - (Version Data: 14.25.28508.0) Microsoft Visual C++ 2019 X64 Minimum Runtime - 14.25.28508 - (Version Data: 14.25.28508.0) Microsoft Visual C++ 2019 X86 Additional Runtime - 14.25.28508 - (Version Data: 14.25.28508.0) Microsoft Visual C++ 2019 X86 Minimum Runtime - 14.25.28508 - (Version Data: 14.25.28508.0) Prepar3D v4 Academic Client - (Version Data: 4.5.14.0) Prepar3D v4 Content - (Version Data: 4.5.13.0) Prepar3D v4 Scenery - (Version Data: 4.5.13.0) Prepar3D v5 Academic Client - (Version Data: 5.0.31.0) Prepar3D v5 Content - (Version Data: 5.0.24.0) Prepar3D v5 Scenery - (Version Data: 5.0.24.0) Okay, here it is. Had no idea if there was anything in there that shouldn't be made public. I flew for 40 years and though the last bunch of years were mainly office so I really kissed up to the IT people to keep me going. LOL. Dave Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted July 5, 2020 Deputy Sheriffs Share Posted July 5, 2020 Did you also check this? Link to comment Share on other sites More sharing options...
dbw 4 Posted July 5, 2020 Author Share Posted July 5, 2020 Yes. Those have been checked previously. Please see above. Thanks. I may just remove, re-download and reinstall. Dave Link to comment Share on other sites More sharing options...
dbw 4 Posted July 7, 2020 Author Share Posted July 7, 2020 All is good now. Dave Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted July 7, 2020 Deputy Sheriffs Share Posted July 7, 2020 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.