julian46 0 Posted May 22, 2020 Share Posted May 22, 2020 This has happened twice now (both times landing ILS 27 Cat-1 at EGNX (Midland UK) Coming in on final just before flare and roll out (so up about 200 ft and about 3 seconds to touch down) and I hear the "speed / speed" warning and the plane just drops like a rock with a 2800fpm touch down Haven't seen this any ware else - any ideas ? This is in the 319 on version 1.3.1.0 (latest) thanks - otherwise its working well (P3D V4.5 HotFix 3) Link to comment Share on other sites More sharing options...
Emi 5161 Posted May 22, 2020 Share Posted May 22, 2020 I've seen this happen at a couple of sceneries and with different aircraft when the Mesh Terrain resolution was set to a value greater than 5m. Try to reduce your Mesh terrain to 5m and see if you still encounter those drops. Other planes I've seen this so far (for reference, maybe interesting for others as well): KORD - A330/B767/B74x ELLX - B74x MKJS - A330/B767 All of them were addon sceneries. I don't quite know what exactly caused this yet, but in all cases removing the addon sceneries solved the sudden drops. They must somehow be related to aircraft size vs mesh terrain setting vs scenery. Link to comment Share on other sites More sharing options...
julian46 0 Posted May 22, 2020 Author Share Posted May 22, 2020 My Mesh Terrain is currently set to 2m (I havent seen it in any other aircraft other than the AS 319 Pro 64) Link to comment Share on other sites More sharing options...
Emi 5161 Posted May 22, 2020 Share Posted May 22, 2020 Try 5m and see what happens please. As said, I'm not entirely sure what exactly causes this, however it seems to be a combination of aircraft size and airport specifications, even though I don't know which ones those are. Link to comment Share on other sites More sharing options...
julian46 0 Posted May 22, 2020 Author Share Posted May 22, 2020 Yes - I just checked and they recommend: 5M Mesh resolution and 7cm texture resolution (mine was 2m and 1m) will try it - thanks https://orbxsystems.com/forum/topic/156046-1m60cm-texture-resolution-and-5-meter-mesh-resolution/ Link to comment Share on other sites More sharing options...
julian46 0 Posted May 22, 2020 Author Share Posted May 22, 2020 Didn't help - same thing happened its odd - on the lower part of final I get these conflicting call outs - 100 and 300 over write each other verbally then - too low - pull up - etc (with 2-300 ft to go) then it just drops suddenly to ground level (this one was at 2900fpm) (GPWS lights up too) Changing the terrain mesh and texture resolution helped with the quality of the graphics overall though (with a small hit in fps) - so that was worth it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.