ProfessorMadman 24 Posted May 13, 2020 Share Posted May 13, 2020 Hi, Just installed the updated LSGG for P3Dv5 and having this at P3D startup - it's due to multiple SimObjects used by SODE having the same identifiers. Thread information regarding this issue here: https://sode.12bpilot.ch/?topic=p3dv5-error-multiple-objects-with-same-title-name Just tthought I'd make you aware Cheers Daniel Please login to display this image. Link to comment Share on other sites More sharing options...
ProfessorMadman 24 Posted May 13, 2020 Author Share Posted May 13, 2020 Also it would seem that the configurator is not honouring the settings when saved. I enabled SODE but the BGLs in the scenery folder are still named .off Link to comment Share on other sites More sharing options...
Steve Ellis 2 Posted May 13, 2020 Share Posted May 13, 2020 Same here too, seems to be multiple issues with settings. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted May 13, 2020 Aerosoft Share Posted May 13, 2020 I have asked the product manager to check this out. Link to comment Share on other sites More sharing options...
Sunny Andonov 32 Posted May 13, 2020 Share Posted May 13, 2020 was just about to report that same! Thanks for helping Mathijs. Link to comment Share on other sites More sharing options...
Søren Rasmussen 2 Posted May 13, 2020 Share Posted May 13, 2020 I have exactly the same dual jetway issue. I'm running both P3D4 and P3D5 and have the LSGG scenery installed on both (1013 and 2000). Furthermore the ASUpdater does not recognize that the LSGG for P3D5 is installed. rgds Søren Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 13, 2020 Deputy Sheriffs Share Posted May 13, 2020 It‘s something how v5 changed the handling of simobjects. You will notice this with more sceneries. Easy to correct by yourself if a scenery is not updated. Change the names in the sim.cfg and adapt in the Sode xml. 4 minutes ago, Søren Rasmussen said: I have exactly the same dual jetway issue. I'm running both P3D4 and P3D5 and have the LSGG scenery installed on both (1013 and 2000). Furthermore the ASUpdater does not recognize that the LSGG for P3D5 is installed. rgds Søren Double jetways is then because you have now two xml in the Sode folder one for v4 and one for v5? Could be fixed by adding the simulator Flag in the xml. The devs will fix it. Link to comment Share on other sites More sharing options...
Sunny Andonov 32 Posted May 13, 2020 Share Posted May 13, 2020 Look like something is wrong with the roof texture and the airport buildings as a whole. They appear like default P3D buildings. Anyone else see what I see? P3Dv5 Please login to display this image. P3Dv4 Please login to display this image. Link to comment Share on other sites More sharing options...
Søren Rasmussen 2 Posted May 13, 2020 Share Posted May 13, 2020 19 minutes ago, masterhawk said: It‘s something how v5 changed the handling of simobjects. You will notice this with more sceneries. Easy to correct by yourself if a scenery is not updated. Change the names in the sim.cfg and adapt in the Sode xml. Double jetways is then because you have now two xml in the Sode folder one for v4 and one for v5? Could be fixed by adding the simulator Flag in the xml. The devs will fix it. Thanks for the explanation, but which folders do I have to look in to find the correct SODE xml and sim.cfg respectively. rgds Søren Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted May 13, 2020 Deputy Sheriffs Share Posted May 13, 2020 8 minutes ago, Søren Rasmussen said: Thanks for the explanation, but which folders do I have to look in to find the correct SODE xml and sim.cfg respectively. rgds Søren I don’t want to be to harsh. But if you don’t know that yourself, it’s not the best to start editing files by yourself. You should just wait until official fixed. But fully on own risk: c:\programdata\12bpilot\SODE there you have the xml and simobjects folder. 38 minutes ago, Søren Rasmussen said: I have exactly the same dual jetway issue. I'm running both P3D4 and P3D5 and have the LSGG scenery installed on both (1013 and 2000). Furthermore the ASUpdater does not recognize that the LSGG for P3D5 is installed. rgds Søren Regarding the not found v5 of the updater. I think that’s a problem several people had. The installer doesn’t get the correct documents folder by windows. Then the file is placed somewhere else. Most times reason is moved/renamed document folders or documents linked with OneDrive. Link to comment Share on other sites More sharing options...
Søren Rasmussen 2 Posted May 13, 2020 Share Posted May 13, 2020 43 minutes ago, masterhawk said: I don’t want to be to harsh. But if you don’t know that yourself, it’s not the best to start editing files by yourself. You should just wait until official fixed. But fully on own risk: c:\programdata\12bpilot\SODE there you have the xml and simobjects folder. Regarding the not found v5 of the updater. I think that’s a problem several people had. The installer doesn’t get the correct documents folder by windows. Then the file is placed somewhere else. Most times reason is moved/renamed document folders or documents linked with OneDrive. I know about xml and cfg files and also how to create/edit those files - just want to make sure that I go to the right folder since a lot of xml and cfg files are are related to P3D installations. But I assume that the files are those found in the Aerosoft Geneva Professional\SimObjects\LSGG_Jetways folder (sim.cfg) and in the ProgramData\12bPilot\SODE\xml folder (aerosoft_LSGG_SODE_Jetways.xml) - just wanted this to be confirmed. No bad feelings rgds Søren Link to comment Share on other sites More sharing options...
Root Admin A. Muegge 57 Posted May 13, 2020 Root Admin Share Posted May 13, 2020 Hi, please notice (run) the Genf Prof P3DV5 Update 2.0.0.1 via ASUpdater Link to comment Share on other sites More sharing options...
Sunny Andonov 32 Posted May 13, 2020 Share Posted May 13, 2020 I just updated and still see the same errors. Link to comment Share on other sites More sharing options...
Motormike 16 Posted May 13, 2020 Share Posted May 13, 2020 Same problem and i do not have Genf in my updater but installed (Balearen, Gibraltar, Milano is in and was installed without problems) Link to comment Share on other sites More sharing options...
Søren Rasmussen 2 Posted May 13, 2020 Share Posted May 13, 2020 1 hour ago, A. Muegge said: Hi, please notice (run) the Genf Prof P3DV5 Update 2.0.0.1 via ASUpdater How to do that? The LSGG Prof P3DV5 is not shown under the P3DV5 section in the ASUpdater. I have LEBL Barcelona for P3DV5 installed and it is listed in this section. rgds Søren Please login to display this image. Link to comment Share on other sites More sharing options...
Motormike 16 Posted May 13, 2020 Share Posted May 13, 2020 Same here Zurich, Frankfurt and Genf are not in the List. Please login to display this image. Link to comment Share on other sites More sharing options...
emm 0 Posted May 13, 2020 Share Posted May 13, 2020 Updated to 2.0.0.1 but still the same problem with the SODE Jetways. Best regards Bruno Link to comment Share on other sites More sharing options...
hollow 11 Posted May 13, 2020 Share Posted May 13, 2020 1 hour ago, emm said: Updated to 2.0.0.1 but still the same problem with the SODE Jetways. Best regards Bruno Yeah, same here... Link to comment Share on other sites More sharing options...
ProfessorMadman 24 Posted May 14, 2020 Author Share Posted May 14, 2020 12 hours ago, Sunny Andonov said: Look like something is wrong with the roof texture and the airport buildings as a whole. They appear like default P3D buildings. Anyone else see what I see? P3Dv5 Please login to display this image. P3Dv4 Please login to display this image. I updated to 2.0.0.1 and still had all the same issues, double jetways (SODE + non-SODE), SODE errors at launch and default terminal buildings bleeding through the airport (probably due to an incorrect exclude file). I removed the XML and SimObjects from my 12bPilot\Sode folder and manually copied the ones from the Genf folders in there - SODE errors at P3D start-up fixed! But I still have dual jetways and default terminal buildings, and the configurator still does not work. Link to comment Share on other sites More sharing options...
MateloT 1 Posted May 14, 2020 Share Posted May 14, 2020 Anyone else getting chinese style writing in C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg when using the configurator? I manually added Package.7 for Geneva but every time I save and exit from the configurator it adds a few more lines of chinese. Please login to display this image. Link to comment Share on other sites More sharing options...
Sunny Andonov 32 Posted May 14, 2020 Share Posted May 14, 2020 I have this Chinese stuff as well and its in ORBX Terraflora entry. PATH=D:\Orbx\p3dv5\Global TerraFlora v2 ACTIVE=true REQUIRED=false 偛捡慫敧㈮崷䅐䡔䐽尺㍐癄‵楁灲牯獴匠散敮祲䑜湹浡捩䐠獩汰祡䔠杮湩吊呉䕌䄽牥獯景⁴祄慮業楄灳慬⁹湅楧敮䍁䥔䕖琽畲刊充䥕䕒㵄慦獬嬊慐正条㜲൝倊呁㵈㩄停䐳㕶䄠物潰瑲捓湥牥屹祄慮業楄灳慬⁹湅楧敮䥔䱔㵅敁潲潳瑦䐠湹浡捩䐠獩汰祡䔠杮湩䄊呃噉㵅牴敵䕒啑剉䑅昽污敳偛捡慫敧㈮崷䅐䡔䐽尺㍐癄‵楁灲牯獴匠散敮祲䑜湹浡捩䐠獩汰祡䔠杮湩吊呉䕌䄽牥獯景⁴祄慮業楄灳慬⁹湅楧敮䍁䥔䕖琽畲刊充䥕䕒㵄慦獬嬊慐正条㜲൝倊呁㵈㩄停䐳㕶䄠物潰瑲捓湥牥屹祄慮業楄灳慬⁹湅楧敮䥔䱔㵅敁潲潳瑦䐠湹浡捩䐠獩汰祡䔠杮湩䄊呃噉㵅牴敵䕒啑剉䑅昽污敳 Link to comment Share on other sites More sharing options...
Root Admin A. Muegge 57 Posted May 14, 2020 Root Admin Share Posted May 14, 2020 vor 5 Stunden , MateloT sagte: Anyone else getting chinese style writing in C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg when using the configurator? I manually added Package.7 for Geneva but every time I save and exit from the configurator it adds a few more lines of chinese. Please login to display this image. Hi, possible to send me / add this config file? C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg Link to comment Share on other sites More sharing options...
Root Admin A. Muegge 57 Posted May 14, 2020 Root Admin Share Posted May 14, 2020 vor 32 Minuten, Sunny Andonov sagte: I have this Chinese stuff as well and its in ORBX Terraflora entry. PATH=D:\Orbx\p3dv5\Global TerraFlora v2 ACTIVE=true REQUIRED=false 偛捡慫敧㈮崷䅐䡔䐽尺㍐癄‵楁灲牯獴匠散敮祲䑜湹浡捩䐠獩汰祡䔠杮湩吊呉䕌䄽牥獯景⁴祄慮業楄灳慬⁹湅楧敮䍁䥔䕖琽畲刊充䥕䕒㵄慦獬嬊慐正条㜲൝倊呁㵈㩄停䐳㕶䄠物潰瑲捓湥牥屹祄慮業楄灳慬⁹湅楧敮䥔䱔㵅敁潲潳瑦䐠湹浡捩䐠獩汰祡䔠杮湩䄊呃噉㵅牴敵䕒啑剉䑅昽污敳偛捡慫敧㈮崷䅐䡔䐽尺㍐癄‵楁灲牯獴匠散敮祲䑜湹浡捩䐠獩汰祡䔠杮湩吊呉䕌䄽牥獯景⁴祄慮業楄灳慬⁹湅楧敮䍁䥔䕖琽畲刊充䥕䕒㵄慦獬嬊慐正条㜲൝倊呁㵈㩄停䐳㕶䄠物潰瑲捓湥牥屹祄慮業楄灳慬⁹湅楧敮䥔䱔㵅敁潲潳瑦䐠湹浡捩䐠獩汰祡䔠杮湩䄊呃噉㵅牴敵䕒啑剉䑅昽污敳 hi, did you have used the Genf Prof. P3DV5 Setup too? Link to comment Share on other sites More sharing options...
Sunny Andonov 32 Posted May 14, 2020 Share Posted May 14, 2020 2 minutes ago, A. Muegge said: hi, did you have used the Genf Prof. P3DV5 Setup too? Yes, I have set it up. Link to comment Share on other sites More sharing options...
Root Admin A. Muegge 57 Posted May 14, 2020 Root Admin Share Posted May 14, 2020 vor 12 Minuten, Sunny Andonov sagte: Yes, I have set it up. ok, we are ckecking the Genf Prof P3DV5 SETUP To fix the config file (C:\ProgramData\Lockheed Martin\Prepar3D v5\add-ons.cfg ) please send me this file as private message or add this here. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.