Sergio.rivera75 1 Posted April 3, 2020 Share Posted April 3, 2020 This has happened to me twice after making a VOR approach and landing at LEJR and after an ils approach and landing at LEMD. First when landing i could engage reverse thrust by even present F2 repeatedly but i had auto brakes medium so they braked for me the plane but after finishing my roll out and reducing my speed to taxi speed i also noticed that the nose-gear didn't steer at any direction. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted April 3, 2020 Share Posted April 3, 2020 1. Which aircraft and engine combination are you referring to? There are eight (8) different aircraft models included in the Airbus Professional Series, so we really need to know which one you're writing about. 2. We have one person report issues with the reverse thrust and we told him it was a calibration issue, which proved to be correct. I can personally testify that there are no issues in our code/models with reverse thrust, and as you are using the F2 key it shouldn't be a calibration issue. I'm guessing that you have not set the repeat command to the far right for the F2 Keybind or you have another key or axis bound to reverse thrust, or a thrust level is still commanding forward thrust when you command reverse thrust (which overrides reverse thrust). If you would like to post a screen shot of your reverse thrust bind I would be happy to take a look at it. 3. Above 10 knots of speed the nose wheel steering capability reduces proportionally as ground speed increases. You didn't really explain the conditions under which you are having issues with nose wheel steering, so it's difficult to provide you with advice. But I will say that there are no issues with our Nose Wheel Steering in any of the Airbus Professional Series so this also must be an issue with your system or settings. Best wishes! Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 4, 2020 Aerosoft Share Posted April 4, 2020 And are you using the latest versions? Link to comment Share on other sites More sharing options...
Sergio.rivera75 1 Posted April 4, 2020 Author Share Posted April 4, 2020 1. Which aircraft and engine combination are you referring to? There are eight (8) different aircraft models included in the Airbus Professional Series, so we really need to know which one you're writing about. Its the aerosoft A330-300 RR 2. We have one person report issues with the reverse thrust and we told him it was a calibration issue, which proved to be correct. I can personally testify that there are no issues in our code/models with reverse thrust, and as you are using the F2 key it shouldn't be a calibration issue. I'm guessing that you have not set the repeat command to the far right for the F2 Keybind or you have another key or axis bound to reverse thrust, or a thrust level is still commanding forward thrust when you command reverse thrust (which overrides reverse thrust). If you would like to post a screen shot of your reverse thrust bind I would be happy to take a look at it. I used a previously calibrated Logitech quadrant, when i noticed this problem right after landing i disconnected my quadrant and try using just f2 but it didn't work. 3. Above 10 knots of speed the nose wheel steering capability reduces proportionally as ground speed increases. You didn't really explain the conditions under which you are having issues with nose wheel steering, so it's difficult to provide you with advice. But I will say that there are no issues with our Nose Wheel Steering in any of the Airbus Professional Series so this also must be an issue with your system or settings. As i said before i reduced my speed almost to 0 and the landing gear still didn't steer. I even try steering with the mouse with no solution. But i just updated to the latest version (1.0.0.10) via Aerosoft Update and will notify you guys if i have this problem again. By the way thanks for the aircraft i love it. Link to comment Share on other sites More sharing options...
Sergio.rivera75 1 Posted April 7, 2020 Author Share Posted April 7, 2020 Well i updated the A330-300 to version 1.0.0.10 and i have noticed several bugs. After doing a long flight SKBO-KLAX with time accelerated to x8 during cruise and then landing with the plane properly configured and seted up even with the autochecklist done, the spoilers partially deployed and in the Ecam doesn't display a deployment, the reverse thrust could not be engaged ( it is blocked) i even tried to pull back the throttles with the mouse and it didn't engage reverse thrust also the steering is blocked even after completely stopped and resume the taxi. Also the left rear landing gear is not in horizontal position. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 7, 2020 Aerosoft Share Posted April 7, 2020 Please check Vol1 about time acceleration. And also open a new topic for a new issue please.- Link to comment Share on other sites More sharing options...
KVAZEMODO 1 Posted May 1, 2021 Share Posted May 1, 2021 The same trouble Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted May 1, 2021 Deputy Sheriffs Share Posted May 1, 2021 This topic is over a year old. So I suggest, that you check that your are on the latest version in combination with the correct version of the sim. If you still have problems, open a new topic with a detailed description of your problem (screenshots, version of the sim and the addon). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.