gregoryv 59 Posted March 26, 2020 Share Posted March 26, 2020 Installed V1.1.00 again and again no terminals and etc.. Going to install back version v1.00 as I don't have any issues with it. Prepar3D 2020-03-26 22-07-53.bmp Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted March 26, 2020 Deputy Sheriffs Share Posted March 26, 2020 And next time as jpg only. But this is for sure an installation error, not a problem of the scenery itself. To which folder did you install the scenery? And btw., which exact version of P3D are you using? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted March 27, 2020 Deputy Sheriffs Share Posted March 27, 2020 @gregoryv as mopperle already said. That’s a install problem. As the new version is now using add-on.xml to install, it might be a layering issue in your scenery library. Best is, if you could show a screenshot of the library. Btw, you can set the screenshot format in P3D options to jpg. Link to comment Share on other sites More sharing options...
gregoryv 59 Posted March 27, 2020 Share Posted March 27, 2020 39 minutes ago, masterhawk said: @gregoryv as mopperle already said. That’s a install problem. As the new version is now using add-on.xml to install, it might be a layering issue in your scenery library. Best is, if you could show a screenshot of the library. Btw, you can set the screenshot format in P3D options to jpg. Thanks Bob. It was installation issue. Somehow the entry in P3D for old scenery remained in scenery file. Removed it, then installed again and all fine except ORBX GES compatibility. Does Hotfix 1.00 can be used here? Many Thanks Greg Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted March 27, 2020 Deputy Sheriffs Share Posted March 27, 2020 15 minutes ago, gregoryv said: Thanks Bob. It was installation issue. Somehow the entry in P3D for old scenery remained in scenery file. Removed it, then installed again and all fine except ORBX GES compatibility. Does Hotfix 1.00 can be used here? Many Thanks Greg Yes, can be used. Link to comment Share on other sites More sharing options...
gregoryv 59 Posted March 27, 2020 Share Posted March 27, 2020 3 minutes ago, masterhawk said: Yes, can be used. Many Thanks Link to comment Share on other sites More sharing options...
BTenhaaf 6 Posted March 27, 2020 Share Posted March 27, 2020 vor 15 Stunden , gregoryv sagte: Yes, I completely uninstalled previous version. No files as no folder remained in P3D folder. I also deleted the previous version of LSZH, but in my scenery.cfg the airport was still active / shown. As Zurich 1.1.0 installs using the xml-method there were two airports loaded into the sim. I removed the LZSH-entrance in my scenery.cfg manually - and that worked. Maybe that this is also the case with your installation. Link to comment Share on other sites More sharing options...
gregoryv 59 Posted March 27, 2020 Share Posted March 27, 2020 Just now, BTenhaaf said: I also deleted the previous version of LSZH, but in my scenery.cfg the airport was still active / shown. As Zurich 1.1.0 installs using the xml-method there were two airports loaded into the sim. I removed the LZSH-entrance in my scenery.cfg manually - and that worked. Maybe that this is also the case with your installation. Yes. Exactly Link to comment Share on other sites More sharing options...
Thomas Ammann 14 Posted March 27, 2020 Author Share Posted March 27, 2020 Just reinstalled Zurich, but same issue like before. I dont have the issue when i turn off the Airport under Addons. On 26.3.2020 at 20:36, mopperle sagte: Dont see this with latest Zurich and all Orbx stuff for EU installed: Please login to display this image. Maybe it is a texture loading issue (timing). Does anything change when zooming in/out Link to comment Share on other sites More sharing options...
trisho0 12 Posted March 29, 2020 Share Posted March 29, 2020 On 3/26/2020 at 3:51 PM, mopperle said: same gate, no sunken wheels: Please login to display this image. And docking also works: Please login to display this image. Question to all having problems: Did you uninstall any old version of LSZH before installing the new version. Could it be that there are old files left, cause you moved/renamed something? I will test with other Gates to find if Jetways get sunken wheels during Undocking. The wheels issue occurs during undocking and when it finish the wheels become restored. This is not normal. Uninstalling the old version do you mean the files from SODE must be removed as well? I will see if that resolve the problem. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted March 29, 2020 Deputy Sheriffs Share Posted March 29, 2020 38 minutes ago, trisho0 said: I will test with other Gates to find if Jetways get sunken wheels during Undocking. The wheels issue occurs during undocking and when it finish the wheels become restored. This is not normal. Uninstalling the old version do you mean the files from SODE must be removed as well? I will see if that resolve the problem. Looks like it's time to completely delete the existing installation, ensure it's also removed from the Scenery Library, reboot, then download the complete 1.1 version from your shop account and install that.. The usual cautions about unzipping it first, turning off your antivirus, installing as Administrator, then turning AV back on apply. A reboot after installation is an optional insurance step, but shouldn't be necessary. Link to comment Share on other sites More sharing options...
trisho0 12 Posted March 30, 2020 Share Posted March 30, 2020 On 3/28/2020 at 11:39 PM, Herman said: Looks like it's time to completely delete the existing installation, ensure it's also removed from the Scenery Library, reboot, then download the complete 1.1 version from your shop account and install that.. The usual cautions about unzipping it first, turning off your antivirus, installing as Administrator, then turning AV back on apply. A reboot after installation is an optional insurance step, but shouldn't be necessary. Good idea. I will proceed and to report it about results. Link to comment Share on other sites More sharing options...
trisho0 12 Posted March 31, 2020 Share Posted March 31, 2020 I launched P3Dv4.5 and removed the AES LSZH from Scenery Library. I didn't see anything related with SODE. Launched to LSZH and P3D loaded the Default and from Gate A42 the jetway worked as a charm, docking and undocking, Rebooted the system and downloaded the Installer again from AES and installed without errors. Launched the AES LSZH Gate A42 and the jetway still with undocking problems and can be seen in: https://drive.google.com/file/d/1ALBp_YEXiSal0eAa_dY8dexjllxDhY4M/view?usp=sharing Link to comment Share on other sites More sharing options...
Deputy Sheriffs Herman 1591 Posted March 31, 2020 Deputy Sheriffs Share Posted March 31, 2020 trisho0, thank you for the update on your troubleshooting. When you write "AES" as in "AES LSZH Gate A42," is that your abbreviation for Aerosoft, or are you referring to the product known as Airport Enhancement Services as at this link? From the video you linked to, it appears you're using GSX. The wheels in the gate look like they're sinking into the ground in an effort to get the jetway low enough to fit the aircraft, since the cab end can't get low enough otherwise. What aircraft are you using? Does it work correctly with gates anywhere else? Do you have this issue at any of the other LSZH gates, in particular at "small" gates? How about with taller aircraft? I know that's a lot of questions, but I'm trying to save the same questions spread out over successive posts in an effort to identify the cause. Here's what I get with stock Ctrl-J jetways since I don't have GSX. The aircraft wheels look normal, although the jetway wheels seem slightly sunken (flat) and the cab floor does seem a little high. But not at all like you're seeing. Please login to display this image. Link to comment Share on other sites More sharing options...
trisho0 12 Posted March 31, 2020 Share Posted March 31, 2020 Yes, AES intended to say Aerosoft. Tried on Gate E27 and still the jetway undocking with sunken wheels. I use PMDG 737NGX. I tried PMDG 747 and the Bird is too large for the Gates A42 and E27. Any more ideas? Screenshot from Gate E27 showing the jetway sunken in Undock process. If the Jetway is docking normal it should undock the same way. Please login to display this image. Link to comment Share on other sites More sharing options...
Querer 74 Posted April 1, 2020 Share Posted April 1, 2020 On 3/31/2020 at 7:03 AM, Herman said: Here's what I get with stock Ctrl-J jetways since I don't have GSX. The aircraft wheels look normal, although the jetway wheels seem slightly sunken (flat) and the cab floor does seem a little high. But not at all like you're seeing. Guys, please reconsider (re-read?) once again what trisho0 actually wrote: the sinking in the ground is only visible during the undocking process. Not while docking, not while docked to the aircraft. So screenshots showing that your jetways are fine while docked or in the parking position or while docking simply does not help with the issue. I checked the video, yes he is using GSX, but the GSX menue bar (green bar on top) clearly indicates "this gate uses default jetways". So it might be a mixture of both, no? @trisho0 I would nevertheless open a thread over at the GSX support forums to ask if GSX modifies the sequence of animation for default jetways in any way (I doubt). Personally, I haven't checked if the undocking results in sunken jetway wheels, as I basically upgraded to GSX Level 2 jetways on almost all possible addon sceneries, including LSZH. Furthermore, honestly, I usually do not watch the undocking animation from outside ;-) Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted April 1, 2020 Deputy Sheriffs Share Posted April 1, 2020 OK, I canfirm the issue with just using Ctrl+J to operate the jetways. Indeed, when undocking, from a certain point twheels disappear in the ground and com back when the jetway is in its stnadby position. Will hand it over to the devs- Link to comment Share on other sites More sharing options...
trisho0 12 Posted April 2, 2020 Share Posted April 2, 2020 I don't think it is an issue from GSX. I operated the jetway with Crtl + J and I got the exactly the same behavior of the jetway undocking with GSX. We need a new SODE files for this LSZH scenery indeed. I did a test with a different spot, on the Gate E23. https://drive.google.com/file/d/1rkQ1DUlPr7JZbhEfTeJaVjsabpFHfP2A/view?usp=sharing Link to comment Share on other sites More sharing options...
buentead 0 Posted April 2, 2020 Share Posted April 2, 2020 @Thomas Ammann I don't see the issue with lake Zurich in my installation. I'm also using the updated version v1.1.0 cu, Adrian Please login to display this image. Link to comment Share on other sites More sharing options...
trisho0 12 Posted April 9, 2020 Share Posted April 9, 2020 Will be created a new SODE jetways for Zurich? Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted April 9, 2020 Aerosoft Share Posted April 9, 2020 I do not know of any such plan at this moment. Link to comment Share on other sites More sharing options...
Timothee 2 Posted April 18, 2020 Share Posted April 18, 2020 Has there been any solution to the original problem Thomas Ammann reported? Because I have exactly the same. Edit: Nevermind, I didn't notice there is an update available. Link to comment Share on other sites More sharing options...
trisho0 12 Posted April 24, 2020 Share Posted April 24, 2020 On 4/18/2020 at 8:29 AM, Timothee said: Has there been any solution to the original problem Thomas Ammann reported? Because I have exactly the same. Edit: Nevermind, I didn't notice there is an update available. SODE updates? Where? Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted April 25, 2020 Deputy Sheriffs Share Posted April 25, 2020 He is talking about the updated Zurich. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted April 25, 2020 Deputy Sheriffs Share Posted April 25, 2020 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.