Geoffray 0 Posted January 18, 2020 Share Posted January 18, 2020 Good evening everyone, I really need you help on that matter... A similar topic had already been opened, but it's now closed... I start a flight as "cold an dark" mode and I am using the checklists to prepare the aircraft, it means that I can't forget something as I am not preparing the aircraft manually... I enter the flightplan thanks to the co-route (my flights plan are made with PFPX and Navigraph, then I export them thanks to SimBrief downloader), but as you can see below, I have no information as per the track, the altitude, etc. Please login to display this image. On the "paperwork preview", we can see the altitude and the track, so it means this is not an issue of flightplan in my opinion... Please login to display this image. The route had been taken into consideration by the airbus as we can see it here below Please login to display this image. Just after take off, I want to activate the Autopilot, so I press on AP1, but nothing happens... The aircraft is not following the route... I installed the latest version of P3D- Please login to display this image. Does anyone had the same issue, solved now and can bring support ? I don't know what to do Thank you for your help! Geoff Link to comment Share on other sites More sharing options...
Jacquesk 0 Posted January 18, 2020 Share Posted January 18, 2020 I have the same problem. I opened a ticket on this matter by support Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted January 18, 2020 Share Posted January 18, 2020 It would be nice to see if you get the same behaviour if you set up the same flightplan manually. May be the flightplan exporter has an issue. I do always put the data manuell into the FMC and have not seen that kind of AP behaviour till now. Wolfgang Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted January 18, 2020 Share Posted January 18, 2020 I don't use the Checklist or Copilot (nor do I recommend doing so), and I did two full test flights today had had no issues. There are some small bugs that most people probably wouldn't notice, but those do not affect flights. Link to comment Share on other sites More sharing options...
Geoffray 0 Posted January 19, 2020 Author Share Posted January 19, 2020 Hi all, Thank you for your feedback. Acutally, I don't know what I did but it seems the aircraft is following the route now... weird.. But anyway, I don"t have TOC and TOD, despite the fact I entered the Cost Index and the FL in the INIT page. Any idea on why and how to add it ? Thank you Geoff Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted January 19, 2020 Share Posted January 19, 2020 Just now, Geoffray said: Hi all, Thank you for your feedback. Acutally, I don't know what I did but it seems the aircraft is following the route now... weird.. But anyway, I don"t have TOC and TOD, despite the fact I entered the Cost Index and the FL in the INIT page. Any idea on why and how to add it ? Thank you Geoff I'm pretty sure it was due to not entering something. I've made numerous test flights with 1.0.0.7 and TOC/TOD is working fine. Link to comment Share on other sites More sharing options...
Geoffray 0 Posted January 19, 2020 Author Share Posted January 19, 2020 4 minutes ago, DaveCT2003 said: I'm pretty sure it was due to not entering something. I've made numerous test flights with 1.0.0.7 and TOC/TOD is working fine. I updated my AEROSOFT - A320 FAMILY PROFESSIONAL BUNDLE P3D4 software to 1.3.0.0, I am wondering if this is not coming from that ? What do you think ? I really don't understand why it does not work whereas it had always been working... Link to comment Share on other sites More sharing options...
Jacquesk 0 Posted January 20, 2020 Share Posted January 20, 2020 Hi Wolfgang, what did you change that works. Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted January 21, 2020 Share Posted January 21, 2020 Hi, I don't really understand your question. Since I don't have a problem with AP, it was not necessary to change anything. But what I often read is that there are problems with exported flight plans (Simbrief, PFPX etc.). The easiest way to check this is to enter the data manually and check in plan mode. Wolfgang Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 21, 2020 Deputy Sheriffs Share Posted January 21, 2020 Curt, looking at your screenshot (there should be no dashed lines) for sure the aircraft was not correct configured and/or there is one or more DISCOs in your flightplan. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted January 21, 2020 Deputy Sheriffs Share Posted January 21, 2020 Exactly, INIT B has to be filled. Can be accessed via INIT A and then -> or <- key. Without ZFW/ZFWCG and BLOCK fuel, the FMS isn't able to compute any predictions. Link to comment Share on other sites More sharing options...
Jacquesk 0 Posted January 24, 2020 Share Posted January 24, 2020 Hi guys. Masterhawk is right. In the previous version of a320/a321 professional when loading loadsheet, the configuration were set the ZFW/ZFWCG automaticly. In this version 1.3.0.0 you have to set manualy the numbers from loadsheet in the mcdu init fuel predictions. Mine is solved Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 24, 2020 Deputy Sheriffs Share Posted January 24, 2020 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.