!! Windows 7 no longer supported !!

As Microsoft will stop supporting Windows 7 on Jan 20th we will be unable to test any of our
products on that platform. It may work, or it may not, but no guarantees from our side. 

Jump to content
Hjontemyra

Checklist and "Cockpit Voice Recorder"

Recommended Posts

If I use the internal checklist together with CO-pilot one item in the checklist is "Cockpit Voice Recorder". It is working good. The First officer asks for it and the button is pressed automatic by FO.-

After completing a flight there is a banner in the top that informes that the checklist can be started over after about one minute.

I then prepare for second flight and also this time using Checklist.

This time the FO asks for "Cockpit Voice Recorder" but it do not recognize that the Voice recorder is still on, from previous flight.

I have to cycle (off then on) that manually.

 

It is not a big deal but maybe the CVR should be switched off in the parking checklist or if the preparation checklist needs to be modified so it can recognize CVR is already on.

 

//Jonas

EDIT: This is in the smaller buses. Do not know how it is in 330.

Share this post


Link to post
Share on other sites

Thanks for your information and we will check this.

 

Regards,

Rolf

Share this post


Link to post
Share on other sites
11 minutes ago, Hanse said:

Thanks for your information and we will check this.

 

Regards,

Rolf

Thx

Share this post


Link to post
Share on other sites

Jonas,

 

I just checked it in the A320 CFM and the CVR is automatically switched OFF after the two engines are started. So please tell me more about the issue you detected.

  • Are you talking about the Professional e.g. the 64 version?
  • Which model you used e. g. A318/A319, A320/A321 or the A330?
  • Please check if the CVR is automatically switched OFF after both engines are started and AVAIL

The reason is quite simple as it should not be ON during the whole flight because this is the normal procedure e.g. the CVR is automatically running. It is manually set to ON during cockpit preparation also to cover the period until the engines are started and fully available.

 

Regards,

Rolf

Share this post


Link to post
Share on other sites
3 minutes ago, Hanse said:
  • Are you talking about the Professional e.g. the 64 version?

Pro version

 

3 minutes ago, Hanse said:
  • Which model you used e. g. A318/A319, A320/A321 or the A330?

As stated in first post it is the small buses, in specific 320

3 minutes ago, Hanse said:
  • Please check if the CVR is automatically switched OFF after both engines are started and AVAIL

 

3 minutes ago, Hanse said:

The reason is quite simple as it should not be ON during the whole flight because this is the normal procedure e.g. the CVR is automatically running. It is manually set to ON during cockpit preparation also to cover the period until the engines are started and fully available.

I guess you missed the "problem" that I pointerd out.

The problem is not if it is on or off. The problem is that the checklist (on second flight) does not pass that item. It keeps repeating itself. 

"cock pit voice recorder"

"cock pit voice recorder"

"cock pit voice recorder"

"cock pit voice recorder"

"cock pit voice recorder"

 

In first flight it ask it once and then it is rectified by pushing the button.

 

The second flight I have to cycle it manually. The FO does not do it like in the first flight.

 

Just now, Hjontemyra said:

Pro version

 

(Hence the post in thios part of the forum: Aerosoft Bus Professional (64 bit, P3D V4) 

Share this post


Link to post
Share on other sites

Jonas,

 

I found and solved the issue mentioned. The resp. changes I made in the Checklist will be part of the next update for all models.

 

Regards,

Rolf

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...