colz99 26 Posted December 29, 2019 Share Posted December 29, 2019 Hi all, how do I change the SID when the ATC assigns me a different one from what is entered in the FMS? like when I have a SID assigned and then want to change it to another one it always gets added behind the last waypoint of the FPL, which is wrong. Whats the procedure on that? Link to comment Share on other sites More sharing options...
GEK_the_Reaper 233 Posted December 29, 2019 Share Posted December 29, 2019 Can you reproduce this behaviour? If YES, can you share your FPLN with the wrong SID then the new SID so I can test it on my end? Thank you! Link to comment Share on other sites More sharing options...
colz99 26 Posted December 29, 2019 Author Share Posted December 29, 2019 Hi, lets take Tegel for example. I was on the ground and planned with the BRANE2L and later was assigned BRANE2N by the VATSIM controller. Nothing too unusual, at least for me, I then went into the DEP/ARR Page of the FMS, selected the BRANE2N and thought everything is good. When I look onto the leg page however, the Brane2N SID gets placed behind the last waypoint of the route (think it was DOMUX, flew from EDDT-EDDL). Same also happened at EDDL though, I then tried to delete my whole flightplan wie DELETE in the LEGS page, but thereafter I couldn't enter the route into the FPLN Page anymore, as it didn't generate a second page to enter airways and waypoints. But I guess thats another story. Usually I do it like that all the time when its necessary (Aerosoft A330/PMDG etc.) and it simply replaces the SID. Maybe different procedure in the CRJ or a bug? Link to comment Share on other sites More sharing options...
GEK_the_Reaper 233 Posted December 30, 2019 Share Posted December 30, 2019 I just tried to change the SID exactly as you did and it worked on my end (I didn't insert the complete FPL, just played with the SID). I used: P3Dv4.5.13 CRJ900 Pro (2.0.0.2) D-ACNN Livery AIRAC 1912 If you want me to further test your flight then pls share the complete FPL, SIM, CRJ version and livery. Link to comment Share on other sites More sharing options...
colz99 26 Posted December 30, 2019 Author Share Posted December 30, 2019 So you simply put in a SID and then changed it again? That will probably work. My problem is that when the complete flightplan is inserted from start to finish, the SID does not get replaced, no, it gets attached to the end of the flightplan. And I don't think that it has got something to do with a single flightplan, as I've said that I've encountered this from EDDL-EDDS and EDDT-EDDL. My sim is the current P3D v4.5 Version, CRJ is the current experimental version. Livery was the D-ACKI. If you wanna have a go, heres the flightplan I used. FLIGHT PLAN ROUTE N0364F220 BRAN2L BRANE Y200 HLZ Z717 PIROT T851 XAMOD XAMO3G Mind you, I did NOT export the FPL into the Sim, I typed it into the FMS manually, so I didn't import the SID BRAN2L or anything. I type in the FPL (BRANE to XAMOD) and thereafter select the Departure and Arrival. Link to comment Share on other sites More sharing options...
GEK_the_Reaper 233 Posted December 30, 2019 Share Posted December 30, 2019 @colz99 I can confirm this oddity. This is indeed strange and a case for @Hans Hartmann Just tried different approaches for changing the SID and all of them failed. I don't know if it's something to do with the latest update since I have not flown the CRJ a while now (due to X-Mas, family and stuff). Link to comment Share on other sites More sharing options...
colz99 26 Posted December 30, 2019 Author Share Posted December 30, 2019 Sure thing Link to comment Share on other sites More sharing options...
giltender 14 Posted December 30, 2019 Share Posted December 30, 2019 It's not a new thing. The FMS doesn't handle edits very will at this point. I've had the above scenario happen to me. It also is not adding the proper discontinuity's or transition way points on some approaches. Now that they have the CTD problem with Navigraph fixed I hope the team has more time to address these FMS issues. Mike Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted December 31, 2019 Share Posted December 31, 2019 Yes, I can also confirm this strange behaviour described from @colz99 Wolfgang Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted January 2, 2020 Share Posted January 2, 2020 @Hans Hartmann I think this is important espacially for user flying Online. I just tested it with the old CRJ with the ASCRJ.dll from 20191216 (beta test) and there the SID change works fine. After selecting the new SID there is a discontinuity which you have to resolve. I'm sure that this also worked correctly in the Pro version. Please login to display this image. Wolfgang Link to comment Share on other sites More sharing options...
Mike F 0 Posted February 17, 2020 Share Posted February 17, 2020 Hi All, Just checking in to see if this is on the "to do" list for an upcoming fix? I recently experienced this myself during an online flight, I had to replace a complex SID due to a runway change and in the end the routing was a total mess and I had to opt for departure vectors... Krgds, Mike Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3695 Posted February 17, 2020 Developer Share Posted February 17, 2020 It's on the to do list but I first need to be able to track down the problem. It's not that easy. Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 6, 2020 Share Posted July 6, 2020 On 2/17/2020 at 10:57 PM, Hans Hartmann said: It's on the to do list but I first need to be able to track down the problem. It's not that easy. Has this been fixed? still having this issue with the latest version of the CRJ Pro. Cannot change SID or deselect runway and SID Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 6, 2020 Share Posted July 6, 2020 2 hours ago, Philip_sim said: Has this been fixed? still having this issue with the latest version of the CRJ Pro. Cannot change SID or deselect runway and SID I did a flight yesterday and was able to change the runway and SID selection without a problem - this is one of the things that was tackled in the recent Beta builds. Going back to the Dep page should display all the available runways and sids below the active ones. Pick the new one and off you go. Do you see this? What version are you using? And in what version of P3D? Pictures of the problem would be really helpful too Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 6, 2020 Share Posted July 6, 2020 18 minutes ago, A_Pilot said: I did a flight yesterday and was able to change the runway and SID selection without a problem - this is one of the things that was tackled in the recent Beta builds. Going back to the Dep page should display all the available runways and sids below the active ones. Pick the new one and off you go. Do you see this? What version are you using? And in what version of P3D? Pictures of the problem would be really helpful too thanks for the fast reply A_Pilot. I was on the beta too. I'm on V2.2.0.0 now. following your instructions this is what I see: Please login to display this image. I have tried both the default FMS and the 4.2 Style Dep/Arr page. Basically I cannot un-select them and going back does not show me all SIDS and RWYs. Will play around with it tomorrow. Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 6, 2020 Share Posted July 6, 2020 Un-selecting a current Sid/star doesn't happen in the real FMS, you can only replace. Have you gone back to the DEP/ARR index page and respected the DEP or ARR option from there? Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 6, 2020 Share Posted July 6, 2020 11 minutes ago, A_Pilot said: Un-selecting a current Sid/star doesn't happen in the real FMS, you can only replace. Have you gone back to the DEP/ARR index page and respected the DEP or ARR option from there? I did a quick video to demonstrate at EKCH, RWY 22R is not even showing up and the SIDs are not present except for RWY selected. Please login to view this video. Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 6, 2020 Share Posted July 6, 2020 1 minute ago, Philip_sim said: I did a quick video to demonstrate at EKCH, RWY 22R is not even showing up and the SIDs are not present except for RWY selected. IMG_6659.MOV the only thing that works, and I am not sure if this is what is done in the RW, is going to the Flight Plan page and entering in the runway. Then I have the option to choose a new SID. For situations when runway change is made by ATC or requested. Please login to display this image. Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 6, 2020 Share Posted July 6, 2020 one thing to add before I clock off, simbrief preloads all the SIDS and RWYs, could this be causing the error? Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 6, 2020 Share Posted July 6, 2020 3 hours ago, Philip_sim said: one thing to add before I clock off, simbrief preloads all the SIDS and RWYs, could this be causing the error? Hmm maybe. I never preload my SIDS or stars. Our company doesn't do stored routes so I am happy to plug things in manually Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 8, 2020 Share Posted July 8, 2020 On 7/7/2020 at 3:37 AM, A_Pilot said: Hmm maybe. I never preload my SIDS or stars. Our company doesn't do stored routes so I am happy to plug things in manually noticed on a turnaround something must have reset and when I enter a new flight plan back to our origin it suddenly lets me change the SIDs and runways. workaround is it does not work, go to flight-plan page and enter the runway in manually, then back to Dep/Arr page and choose the sid/star. Link to comment Share on other sites More sharing options...
A_Pilot 70 Posted July 8, 2020 Share Posted July 8, 2020 7 minutes ago, Philip_sim said: noticed on a turnaround something must have reset and when I enter a new flight plan back to our origin it suddenly lets me change the SIDs and runways. workaround is it does not work, go to flight-plan page and enter the runway in manually, then back to Dep/Arr page and choose the sid/star. Sounds like maybe a database snafu then. What NAV database are you using? (default, Aerosoft or navigraph) I'll be honest, manual entry of a runway should not have worked, that's not something that's done in any FMS model I've used. Almost every governing agency has declared the rule that any SID or STAR must be drawn from the database and not "built" manually, which would cover the way you did it. As such very few FMSs allow manual runway entry If the database is corrupted (it happens) you get to fly a conventional SID and STAR instead, in green needles. ATC loves that so much, they will scream Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 8, 2020 Share Posted July 8, 2020 1 minute ago, A_Pilot said: Sounds like maybe a database snafu then. What NAV database are you using? (default, Aerosoft or navigraph) I'll be honest, manual entry of a runway should not have worked, that's not something that's done in any FMS model I've used. Almost every governing agency has declared the rule that any SID or STAR must be drawn from the database and not "built" manually, which would cover the way you did it. As such very few FMSs allow manual runway entry If the database is corrupted (it happens) you get to fly a conventional SID and STAR instead, in green needles. ATC loves that so much, they will scream latest navigraph Link to comment Share on other sites More sharing options...
Philip_sim 27 Posted July 8, 2020 Share Posted July 8, 2020 15 minutes ago, A_Pilot said: Sounds like maybe a database snafu then. What NAV database are you using? (default, Aerosoft or navigraph) I'll be honest, manual entry of a runway should not have worked, that's not something that's done in any FMS model I've used. Almost every governing agency has declared the rule that any SID or STAR must be drawn from the database and not "built" manually, which would cover the way you did it. As such very few FMSs allow manual runway entry If the database is corrupted (it happens) you get to fly a conventional SID and STAR instead, in green needles. ATC loves that so much, they will scream I realized I might have spotted an error. I went back to the default FMS type from the tablet selection then went and tried to change the rwy from Dep/Arr page: Please login to display this image. At EKCH, RWY 30 is not seen as its on page 2 page and this is a problem when trying to select another runway, one RWY always goes to the next page and I cannot go to the next page because it won't let me. However if no RWYs and SIDs are selected than you can. If anyone can verify they have this issue to would be great. Probably a small error with the FMS. @Hans Hartmann Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.