GL5 0 Posted December 14, 2019 Share Posted December 14, 2019 Hello, I'm using the A330 Version 1.0.0.3. The Text on the MCDU is hard to read (unsharp), especially the small ones. This is also seen on a tablet using Simserver. Are there settings so that the text is displayed sharper? Regards Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted December 14, 2019 Share Posted December 14, 2019 1. What size monitor are you using? 2. What resolution is P3D set to run at? (see Item #1 in the P3D Screen Shot below) 3. Can you try the graphics settings shown in the screen shot below and see how they work for you? 4. How does the image of the MCDU appear to you on your monitor? Is it the same as your MCDU dislays to you or is it sharper? 5. Are you using any third party shaders such as PTA or TomatoShade? If so, we strongly advise against this. P3D Graphics Settings Please login to display this image. P3D HDR SETTINGS Please login to display this image. MCDU Please login to display this image. Link to comment Share on other sites More sharing options...
GL5 0 Posted December 14, 2019 Author Share Posted December 14, 2019 Hi, I'm using the default shader. Attached you can find my settings. Screen resolution 1920x1080. Screensize is 32" for P3D, tablet 10.5". I tried yours, but nothing changed. Your screenshot is from the 2D-panel not from the VC, this looks for me also very good Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted December 14, 2019 Deputy Sheriffs Share Posted December 14, 2019 What you are experiencing is zooming in too much on a huge monitor with a low resolution and sitting too close. The distance between your eyes and the mintor should be around 98cm. I have a 15" 4k monitor, but when zooming in too far or getting close, it is also getting unsharp: Please login to display this image. And at 32" the pixel size of your monitor is far bigger then on a e.g. 24" screen Link to comment Share on other sites More sharing options...
GL5 0 Posted December 14, 2019 Author Share Posted December 14, 2019 Hi, I agree, but if you look at your screenshot the "0" and "8" of the smaller text are very unsharp even though your pixels are smaller. If you look at my 1st posted picture, it is from the 10.5 Samsung tablet with much smaller pixelsize but the text is unsharp as well. I'm using also the 747-8 from a well know developer, the text is very sharp on my Screen and tablet. If you check my second post 3rd picture, it's the MCDU from the 2D panel, it looks very sharp on my screen, this is what it should be in VC. Link to comment Share on other sites More sharing options...
GL5 0 Posted December 15, 2019 Author Share Posted December 15, 2019 Hi, attached to sceenshots from the FSLABS A320 MCDU (VC) on my screen with the same settings as for the A330. It's a big difference compared to the A330 MCDU. What do you think. Regards Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
GL5 0 Posted December 27, 2019 Author Share Posted December 27, 2019 Hello, got a new screen now with higher resolution 3840x2160. The text on the MCDU still not good to read. Using now V1.0.0.5 On the other displays the text is very clear. Can you improve this please, thank you. Regards Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Timonier1955 3 Posted December 28, 2019 Share Posted December 28, 2019 Hello v.1.0.0.5 ?? are you sure ? Regards Marc Link to comment Share on other sites More sharing options...
GL5 0 Posted December 28, 2019 Author Share Posted December 28, 2019 Hello, yes I am, look at the screenshot Regards Please login to display this image. Link to comment Share on other sites More sharing options...
Timonier1955 3 Posted December 28, 2019 Share Posted December 28, 2019 ok thx strange I can’t see this update on my computer via the ASUpdater. Regards Marc Update : ok just restarted the updated and I see the new beta version. Link to comment Share on other sites More sharing options...
Patrice_cesson 4 Posted January 6, 2020 Share Posted January 6, 2020 Hi, I have exactly the same problem on A320 (version 1300) MCDU. On iPad Pro or Samsung tablet, using Firefox or Chrome browser, same problem. Very difficult to read the small letters. Patrice. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 6, 2020 Deputy Sheriffs Share Posted January 6, 2020 41 minutes ago, Patrice_cesson said: Hi, I have exactly the same problem on A320 (version 1300) MCDU. On iPad Pro or Samsung tablet, using Firefox or Chrome browser, same problem. Very difficult to read the small letters. Patrice. Got nothing to do with the above said. Link to comment Share on other sites More sharing options...
Patrice_cesson 4 Posted January 6, 2020 Share Posted January 6, 2020 Yes, Aerosoft is far from FlightSimLabs in this area. 47 minutes ago, mopperle said: Got nothing to do with the above said. What do you mean? AFAIK Aerosoft is far from FlightSimLabs in this area. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 6, 2020 Deputy Sheriffs Share Posted January 6, 2020 1 hour ago, Patrice_cesson said: What do you mean? your are talking about the thing on the tablet, which is a totally different thing that what is being talked about in this topic. Link to comment Share on other sites More sharing options...
Patrice_cesson 4 Posted January 6, 2020 Share Posted January 6, 2020 On 12/14/2019 at 5:35 PM, GL5 said: Hello, I'm using the A330 Version 1.0.0.3. The Text on the MCDU is hard to read (unsharp), especially the small ones. This is also seen on a tablet using Simserver. Are there settings so that the text is displayed sharper? Regards You did not read the topic fully. There is a problem on tablets too, as indicated above by GL5.. And tablet or not, there is a problem here. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted January 6, 2020 Deputy Sheriffs Share Posted January 6, 2020 OK, yo simply dont get it: He is using Simserver, which got nothing todo with Aerosoft. And we have no idea what this software does. Link to comment Share on other sites More sharing options...
GL5 0 Posted January 7, 2020 Author Share Posted January 7, 2020 Hello, I'm using now the A330 V1.0.0.6. I compared the "Virtual Cockpit MCDU" and the "2D-Panel MCDU" to clarify the problem. Here you can clearly see the big differences. If you only have the VC (and you don't know what the digits should be) you can hardly differentiate the 0 the 6 the 8 or the 9. The screenshot is taken from a screen with a resolution of 3840x2160. Regarding the Simserver that I'm using also to visualize the MCDU on a 10.5" tablet. Here I can see the same picture of the MCDU like in the virtual cockpit. I talked to the developer of SIMSERVER, but he can't do anything to improve this, because he uses what the aircraft supplies. I don't want to use the 2D-panel at all. I want only use the VC and the tablet for displaying the MCDU. I think this can only be improved by Aerosoft. Thank you. Regards Please login to display this image. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted January 8, 2020 Share Posted January 8, 2020 That looks like an intensity issue. Can you please try lowering the intensity on the MCDU? Link to comment Share on other sites More sharing options...
GL5 0 Posted January 8, 2020 Author Share Posted January 8, 2020 Hi Dave, I tried to decrease the intensity, see attached screenshot. The numbers are drawn thinner, but still very unclear and incomplete. Have you tried it yourself? Are the numbers well displayed? Are you satisfied with the way the digits are displayed? I like to fly the A330 very much, so please improve the display of the digits, thank you. Regards Please login to display this image. Link to comment Share on other sites More sharing options...
Patrice_cesson 4 Posted January 8, 2020 Share Posted January 8, 2020 Yes, the MCDU display in the VC should be like the one of the 2D MCDU. And this concern exists on all Aerosoft Airbus planes, not only the A330. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.