Captain Fred97 2 Posted September 17, 2019 Share Posted September 17, 2019 Yes I have read the posting about weight etc. however, I use the Aerosoft fuel planner and generate a load sheet and use that in the MCDU. I just finished a flight--no landing from KDTW to KORD, a short flight. The flight plan was on the MCDU but couldn't land, LS was on, LOC was on but the A319 could capture the localizer or the glidescope. Moreover, the flight plans route was also strange, with some fairly sharp turns in it. I use Simbrief as my flight planner and send the file to the flight plans file. I don''t know what I am doing wrong, but it is getting frustrating when the aircraft approaches the airport but doesn't land. Any and all help is appreciated. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted September 18, 2019 Deputy Sheriffs Share Posted September 18, 2019 Hello Captain Fred97, Do you have a screnshot how the route looks like on the ND? How about a .flp file from Simbrief so we can try to have a look ourselves and see if we can recreate. Link to comment Share on other sites More sharing options...
rafgath73 3 Posted September 24, 2019 Share Posted September 24, 2019 Same problem here I used a plan as following EDDN RODIS L604 RUDNO T203 TIVDA T703 LULAR Z205 BUDEX Z37 GIMBO DCT PESAT DCT BABIT DCT RIGMU LYBE and the plane lost it's way in the triangle 'RUDNO-TIVDA-LULAR'. Unfortunately I didn't take the screenshot. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted September 24, 2019 Aerosoft Share Posted September 24, 2019 Just make sure you are using the latest version of P3D as it might have to do with that. Please login to display this image. Link to comment Share on other sites More sharing options...
rafgath73 3 Posted September 24, 2019 Share Posted September 24, 2019 Yes I have the latest ver. of P3D and AIRAC (Navigraph). My System: Intel Core I-7 7700K CPU @ 4.8GHz, Corsair H100i v2, EVGA Z270 FTW-K, Kingston HyperX Fury Black 16GB PC 21300, EVGA GeForce GTX 1080 FTW GAMING ACX 3.0 , Windows 10 64 bit. I used A320 Lufthansa FL 350 ZFW: 60,427kg (Pax:176, Cargo:4400kg, Fuel: 8,897kg) If you put my route into FMS you should see very odd circles close to mentioned triangle. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted September 24, 2019 Deputy Sheriffs Share Posted September 24, 2019 Please post your flightplan as a flightplan file. Link to comment Share on other sites More sharing options...
Captain Fred97 2 Posted September 24, 2019 Author Share Posted September 24, 2019 Ok next time I will. Unfortunately I didn't take a screen shot. Yes. I did do the tutorial read and reread all the documentation, viewed YouTube videos on fly the Airbus Profession A318-A321. So I am puzzled why the aircraft didn't follow the flight plan. Here is the flight plan. It is a short flight from KDTW (Detroit Metropolitan Airport) to KCVG ( North Kentucky/Cincinnati International Airport) : JINAK CUBOB DQN FRAAM CAMMS NEATS, cruise altitude 28,000, aircraft: A319-100 with 75 pax. I have actually flown this flight on Delta twice. It's almost a commuter flight. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted September 24, 2019 Aerosoft Share Posted September 24, 2019 To be honest we are not too impressed with most YT videos.... Link to comment Share on other sites More sharing options...
DrShadow 22 Posted September 26, 2019 Share Posted September 26, 2019 Hi I also have the problem, that my bus isn't following the route anymore... I dont know why, made the flightplan in simbrief, loadsheet generated, did all the checklists. Is this because of P3D 4.4? Is it necessary to have 4.5? Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Routing : VEBI3W VEBIT T50 ROTOS UZ669 VADAR DCT NINTU UN869 NASOS UL27 BLN BL1DCQ LSZHLEMG01.flp Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted September 26, 2019 Deputy Sheriffs Share Posted September 26, 2019 27 minutes ago, DrShadow said: Is this because of P3D 4.4? Is it necessary to have 4.5? On 9/24/2019 at 12:25 PM, Mathijs Kok said: Just make sure you are using the latest version of P3D as it might have to do with that. Please login to display this image. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 9, 2019 Share Posted October 9, 2019 Hi all, also have to report annoying "not following route" Problem from first waypoint after start !!!!! with latest P3D V4.5.13.32097 Version downloaded on 7.10.19 and latest Airbus Professional v1.2.5 (re-download did not help) also made INIT weight entry correct, using different SIMBRIEF routes based on latest Navigraph data cycle (data source in Aerosoft A320/321 configurator set on Navigraph too) I am quite experienced with Airbus flying, Autopilot worked already before my two months Boeings flight phase For me Looks like problem came with latest P3D Version update, can somebody confirm on that? What is problem solving state? Kind regards Berthod Please login to display this image. Link to comment Share on other sites More sharing options...
keenrw 59 Posted October 10, 2019 Share Posted October 10, 2019 On 9/26/2019 at 6:34 PM, DrShadow said: Hi I also have the problem, that my bus isn't following the route anymore... I dont know why, made the flightplan in simbrief, loadsheet generated, did all the checklists. Is this because of P3D 4.4? Is it necessary to have 4.5? Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Routing : VEBI3W VEBIT T50 ROTOS UZ669 VADAR DCT NINTU UN869 NASOS UL27 BLN BL1DCQ LSZHLEMG01.flp 362 B · 2 downloads Hi I know it dosnt help but i flew the first part of your route upto the screen shot you took and did not have any problems with the airbus following the route ... i use the latest P3Dv4 HF2 as well , one thing i did notice on your ND you had intersept showing before BREGO .. on my route the FMC for the route said KLO02 then BREGO using Navigraph 1910. Rich Please login to display this image. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 10, 2019 Share Posted October 10, 2019 dear Keenrw, please confirm, did you use this recently updated p3dv4.5 Version: Please login to display this image. ? Berthold Link to comment Share on other sites More sharing options...
keenrw 59 Posted October 10, 2019 Share Posted October 10, 2019 5 hours ago, Berthold Ferstl said: dear Keenrw, please confirm, did you use this recently updated p3dv4.5 Version: Please login to display this image. ? Berthold Yeah its the latest P3D4 with HF2...13. 32097 Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 11, 2019 Aerosoft Share Posted October 11, 2019 We will try to recreate this in the weekend. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 11, 2019 Share Posted October 11, 2019 dear all, my mistake, LOC Bottom was not pressed, too Long Boeing flying before …. nice weekend Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 12, 2019 Share Posted October 12, 2019 ….wrong conclusion with "LOC" for me tracking problem still exists Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 12, 2019 Share Posted October 12, 2019 ..todays flight again without any plan tracking and glide slope finding, will have to study tutorial flight again to exclude further own mistakes Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 13, 2019 Share Posted October 13, 2019 dear support Team ..also after following tutorial flights procedure still lacking NAV tracking in Auto Pilot mode with A320 (weigths correctly set in INIT 2 page, happens also without preselected SID STAR from SIM BRIEF, SID STARS directly programmed in FMC), ask for help what to do..? does it make sense to check, what happens with A319 plane? latest Airbus Profess. Version 1.2.5 latest prepar 3D V4.5 Version Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted October 13, 2019 Deputy Sheriffs Share Posted October 13, 2019 9 minutes ago, Berthold Ferstl said: does it make sense to check, what happens with A319 plane? No, until you have different version of the Airbus installed. And are you sure that you exactly configured the Airbus as written in the tutorial? Forget everything what you have learned when flying a Boeing, the logic is completely different. Also show us screesnshots like the one you made above, but also a closeup of the MCDU. And please make those screenshots during daylight (much easier to read). And attach the flightplanfile to your post. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 13, 2019 Share Posted October 13, 2019 Hi mopperle, thx for answering I followed tutorial procedure below with still existing Problem Just flew (here with A319) starting from Cold and Dark from EDDN by manually FMC Input simple route (means no additional way Points) direct to EDDS (here no SIMBRIEF CO route involved) with manually input SID and STAR, checking flight plan, sorrily only took that one Picture, will collect, more photo documentation might come with next Trial Berthold Please login to display this image. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 13, 2019 Share Posted October 13, 2019 next Trial Route EDDN DKB GEBNO EDDS with SID STARs (see photos) inkl automated (Pilot/Copilot) Checklist procedure Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. V Speeds by flaps & Trim Setting, this time during engine start up (hope thats not critical, normally I did it before) Please login to display this image. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 13, 2019 Share Posted October 13, 2019 very strange routes change (pic 18ff) during take off Phase, plane Always straight, should turn left according original route Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Berthold Ferstl 0 Posted October 13, 2019 Share Posted October 13, 2019 no Messages in message window anymore (what meant "T.O. inhibit" seen before?) Please login to display this image. Link to comment Share on other sites More sharing options...
Hoffie3000 96 Posted October 13, 2019 Share Posted October 13, 2019 Deine Eingaben decken sich nicht mit meinen: Deine Flight Level Eingabe ist viel zu hoch für diese Distanz. Dort sollte kein Descend-Pfeil sein, dem kann das FMC nicht folgen. Please login to display this image. Wenn ich mit FL120 rechne sieht man sowohl den TOC als auch TOD. Please login to display this image. Wolfgang Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.