Jump to content

The engine sound issue of the A3XX Professional


Meyerflyer

Recommended Posts

I tried loading the 330 directly from the scenario screen like you mentioned using both cold and dark and the default turn-around state. Still, if starting the engines the proper way, I get no shutdown sounds at my destination. Starting them using Control +E and I get shutdown sounds at destination. Although this leads to weird looping start-up sounds. I also don't always get full start-up sounds for the APU. Sometimes they work. Other times I'll start it, switch to external view, and nothing until its fully operational and then boom, the running APU sound pops on out of nowhere. Absolutely ridiculous.

Link to comment
Share on other sites

  • 2 weeks later...
  • Replies 125
  • Created
  • Last Reply

Hey guys,

 

As promised, I've continued to dig into the Airbus sounds.  I found something which may well help with this issue.  Please see my post (link below).  Please get back to me here in this thread to let me know if it makes a difference.

 

Many thanks, and sorry for the long delay.

 

 

Link to comment
Share on other sites

Hello Dave, no worries. Thanks for the suggestion. I can report that I tried the 16 bit change and it did not make a difference.

 

Take care.

Link to comment
Share on other sites

4 hours ago, zedblk said:

Hello Dave, no worries. Thanks for the suggestion. I can report that I tried the 16 bit change and it did not make a difference.

 

Take care.

 

Ah, bummer.  I'll keep at it!

 

Link to comment
Share on other sites

OK. Currently in the A330 now doing a long-haul for my VA but I'll try and make this change for the next flight and report back.

Link to comment
Share on other sites

  • 3 weeks later...

To add something (doent know if this makes any difference)

If I load the Aircraft with TAXI or Take Off state where the engines are already running, the shutdown sound is not always cut.

 

From my 10 tests, the shutdown sound was cut 4 times and if you try to start the engines again, the sound was always cut :-S Weird thing. (Test was done with A321 CFM)

 

 

Link to comment
Share on other sites

Are there any findings on that topic so far?

I checked my videos and about 6 month ago, I ddn't had this problem ( I know this is not helpful but anyway, I said it now: :P)

Link to comment
Share on other sites

And we all continue to meander around this problem with no answer for years... seriously?!
 

I own Aerosoft Extended A318-A321, A330 Professional, and 318-321 Professional and the engine shutdown sound disappearing has haunted me across three different computers and two different sims.  We're paying a lot of money to use this software and small instances such as this one completely pull you out of a pretty immersive and realistic experience.

 

Just because a few developers are "not" experiencing the bug does not AT ALL negate the fact that this isn't the only thread on this forum that exists in regards to this specific issue that users thoroughly explain in detail (some have even made enough of an effort to include videos of this bug) and the developers time and time again dismiss the problem with the awful "we don't experience that here, so we will now close the topic."

 

Enough with the condescending dismissal and blatant ignorance towards paying customers who want their money's worth.  Do your jobs.  Reading these forums and seeing the same thing time and time again is getting very old.  All the way up to you included, Mr. Kok.

 

Enough with the games, look into the issue.  After all, the development team was able to create the software from scratch but can't locate something this small?  One of two things is happening 1.) The development team is incredibly lazy.  or 2.) Nobody is looking into it, but we are being told otherwise.

 

I am certain it is instance number #2.

 

Enough.  Give us our money's worth; fix the problem and give us a patch.  This game is getting ridiculous.

Link to comment
Share on other sites

Very tough words Kolja,  some also understandable but anyway back to more productive topics.

 

I did more tests on that cause this is really annoying me on each flight.

It looks like that the Aircraft Shutdown Sound is just working 1 time on each time the aircraft is loaded.

 

On all tests, I restarted the Sim.

 

Test 1 - State: Cold and Dark

After loading the Aircraft you hear some sounds inlcuding the shutdown sound.

I did a normal engine start, was taxiing some meters and than did the shutdown. No sound.

 

Test 2 - No DEF State loaded (as the aircraft is loaded after a fresh installation)

 

Was taxiing some meters and did the shutdown again.

Shutdown sound was working.

 

At this point I thought that probably the State has something to do with the Shutdown sound and I started the Engines again, was taxiing again some meters and did the Shutdown again. No Shutdown sound was loaded.

 

Test 3 - No DEF State loaded (as the aircraft is loaded after a fresh reinstallation)

Restarted the Sim, loaded the Aircraft again, some meters taxiing and shuting down the engines. Sound was working.

 

So my conclusion on that is, that the engine shutdown sound is just playing 1 time on every Aircraft load (execpt States where the Sound is already playing at the AC load) for an unknown reason.

I think it would also working with the C&D State, if the sound woldn't play directly after loading the Aircraft, dont know.

 

Some reasearch also showed, that in Nov. 2019 it was working fine without isses for me.

I changed 2 things during the last month, the P3D v4 version from HF2 to HF3 and installed all the Airbus Updates which where released after this time. (I have no idea which version was current in Nov 2019 so that i am able to test that version).

 

If AS can provide me the Version which was current in Nov. 2019 I can do some more tests with the older versions too.

 

FInal words, I am really interested to find out what is causing this really annoying, strange effect.

 

Cheers!

 

 

 

 

 

Link to comment
Share on other sites

Bernd,

 

Hi, thank you for this amazing response.  While my delivery could have been lighter in tone, it's certainly disappointing to have to see users dig into this issue themselves rather than the developers whose one of many main tasks is to approach these issues with the intent of fixing them, rather than the snarky dismissal we've seen time and time again.

 

So please help me with this, because I am going to do some experimenting myself now:

 

I have come to notice the same thing you have.  My default load state is turn-around.  Upon loading into the sim, the engines do indeed play the shutdown sound.  I have not experimented with this enough to recall any instance where the sound worked once again in the scenario.  The bug here seems to be as you stated: the shutdown sound will only play once in every scenario.

 

It seems to be whenever a user loads into a scenario that involves a panel state with the engines turned off, the load-in itself sadly hijacks that one and only opportunity to hear the sound played as the engines somehow are loaded in the start position for a brief moment, before turning off.

 

I was able to counteract this issue in P3D V3 with the Extended version simply by pressing "Q" on my keyboard two times immediately before cutting the engines.  This solved the problem.  In V4.4, however, it does not.

 

It is in my truest belief that this issue has to be within the heart of either these three files: aircraft.cfg, panel.cfg, or, sound.cfg.

 

The problem is not re-writing them; I would have no issue doing that - I've been doing it for years.  The issue rests here: "where does one start in finding the origin?"

 

I was able to re-write the Quality Wings 757 .cfg (I don't remember which one specifically - it was years ago) and was able to load into a scenario with the engines completely turned off; no shutdown sound was played upon load in.  I am hoping to achieve the same outcome with this issue, though the files are a bit more complex to work with...

 

If you wouldn't mind sharing with me what panel state you load into to help fix my problem, I would greatly appreciate it.  Thanks for you speed reply!

 

My best,

Kolja

 

 

EDIT: Some research brought me to the Setup.abx file which you can find in: C:\Users\"Your Name"\Documents\Aerosoft\Airbus\

 

The following lines of code within this file are written as such when one selects a Cold and Dark state to be loaded upon entry to the sim:

 

[Variables_Set1]
set1_Sidewindow_pos_CP=0.000000
set1_Sidewindow_pos_FO=0.000000
set1_Sidewindow_open_CP=0.000000
set1_Sidewindow_open_FO=0.000000
set1_Sidewindow_close_CP=0.000000
set1_Sidewindow_close_FO=0.000000
set1_Table1_pos=0.000000
set1_Table1_open=0.000000
set1_Table1_close=0.000000
set1_Jumpseat_open=0.000000
set1_Jumpseat_close=0.000000
set1_Sunshade1_open=0.000000
set1_Sunshade1_close=0.000000
set1_Sunshade2_open=0.000000
set1_Sunshade2_close=0.000000
set1_Aileron_droop=0.000000
set1_AB_SECURITYSCREEN_SWITCH=0.000000
set1_AB_Cabindoor3=0.000000
set1_AB_Cabindoor4=0.000000
set1_APU_DOOR_ANIM=0.000000
set1_AB_SPOILER1_L=0.000000
set1_AB_SPOILER2_L=0.000000
set1_AB_SPOILER3_L=0.000000
set1_AB_SPOILER4_L=0.000000
set1_AB_SPOILER5_L=0.000000
set1_AB_SPOILER1_R=0.000000
set1_AB_SPOILER2_R=0.000000
set1_AB_SPOILER3_R=0.000000
set1_AB_SPOILER4_R=0.000000
set1_AB_SPOILER5_R=0.000000
set1_AB_PDS_Eng1Master=0.000000
set1_AB_PDS_Eng2Master=0.000000
set1_AB_PDS_ignition=0.000000
set1_Button_Power_Avail=0.000000
set1_LightTest=0.000000
set1_LightSwitch=0.000000
set1_AB_OVH_WIPERL_KNOB=0.000000
set1_AB_OVH_WIPERR_KNOB=0.000000
set1_AB_OVH_HYDL=0.000000
set1_AB_OVH_HYDR=0.000000
set1_AB_OVH_HYDELEC1=0.000000
set1_AB_OVH_HYDELEC2=0.000000
set1_AB_OVH_HYDL_FAULT=0.000000
set1_AB_OVH_HYDR_FAULT=0.000000
set1_AB_OVH_HYDELEC1_FAULT=0.000000
set1_AB_OVH_HYDELEC2_FAULT=0.000000
set1_AB_OVH_HYDELEC1_COVER=0.000000
set1_AB_OVH_HYDPTU=0.000000
set1_AB_OVH_HYDPTU_FAULT=0.000000
set1_AB_OVH_FUELPL1=0.000000
set1_AB_OVH_FUELPL2=0.000000
set1_AB_OVH_FUELPR1=0.000000
set1_AB_OVH_FUELPR2=0.000000
set1_AB_OVH_FUELPCL=0.000000
set1_AB_OVH_FUELPCR=0.000000
set1_AB_OVH_FUELPL1_FAULT=0.000000
set1_AB_OVH_FUELPL2_FAULT=0.000000
set1_AB_OVH_FUELPR1_FAULT=0.000000
set1_AB_OVH_FUELPR2_FAULT=0.000000
set1_AB_OVH_FUELPCL_FAULT=0.000000
set1_AB_OVH_FUELPCR_FAULT=0.000000
set1_AB_OVH_FUELXF=0.000000
set1_AB_OVH_FUELXF_OPEN=0.000000
set1_AB_OVH_FUELMODE=0.000000
set1_AB_OVH_FUELMODE_FAULT=0.000000
set1_AB_OVH_ELECBAT1=0.000000
set1_AB_OVH_ELECBAT2=0.000000
set1_AB_OVH_ELECBAT1_FAULT=0.000000
set1_AB_OVH_ELECBAT2_FAULT=0.000000
set1_AB_OVH_ELECGENL=0.000000
set1_AB_OVH_ELECGENR=0.000000
set1_AB_OVH_ELECGENL_FAULT=0.000000
set1_AB_OVH_ELECGENR_FAULT=0.000000
set1_AB_OVH_ELECGENAPU=0.000000
set1_AB_OVH_ELECGENAPU_FAULT=0.000000
set1_AB_OVH_ELECEXT=0.000000
set1_AB_OVH_ELECEXT_AVAIL=0.000000
set1_AB_OVH_ELECEXT_ON=0.000000
set1_AB_OVH_ELECBT=0.000000
set1_AB_OVH_IDG1=0.000000
set1_AB_OVH_IDG2=0.000000
set1_AB_OVH_IDG1_COVER=0.000000
set1_AB_OVH_IDG2_COVER=0.000000
set1_AB_OVH_IDG1_LIGHT_FAULT=0.000000
set1_AB_OVH_IDG2_LIGHT_FAULT=0.000000
set1_AB_OVH_AC_ESS_FEED=0.000000
set1_AB_OVH_AC_ESS_FAULT=0.000000
set1_AB_OVH_PNEUBLEEDL=0.000000
set1_AB_OVH_PNEUBLEEDR=0.000000
set1_AB_OVH_PNEUBLEEDL_FAULT=0.000000
set1_AB_OVH_PNEUBLEEDR_FAULT=0.000000
set1_AB_OVH_PNEUBLEEDAPU=0.000000
set1_AB_OVH_PNEUBLEEDAPU_FAULT=0.000000
set1_AB_OVH_PNEUXBLEED=0.000000
set1_AB_OVH_PNEUPACKL=0.000000
set1_AB_OVH_PNEUPACKR=0.000000
set1_AB_OVH_PNEUPACKL_FAULT=0.000000
set1_AB_OVH_PNEUPACKR_FAULT=0.000000
set1_AB_OVH_HOTAIR=0.000000
set1_AB_OVH_HOTAIR_FAULT=0.000000
set1_AB_OVH_ZONETEMP1=0.000000
set1_AB_OVH_ZONETEMP2=0.000000
set1_AB_OVH_ZONETEMP3=0.000000
set1_AB_OVH_ANTIICE_WING=0.000000
set1_AB_OVH_ANTIICE_WING_FAULT=0.000000
set1_AB_OVH_ANTIICE_ENGL=0.000000
set1_AB_OVH_ANTIICE_ENGR=0.000000
set1_AB_OVH_ANTIICE_ENGL_FAULT=0.000000
set1_AB_OVH_ANTIICE_ENGR_FAULT=0.000000
set1_AB_OVH_ANTIICE_PROBEWINDOW=0.000000
set1_AB_OVH_APU_MASTER=0.000000
set1_AB_OVH_APU_MASTER_LIGHT_FAULT=0.000000
set1_AB_OVH_APU_START=0.000000
set1_AB_OVH_APU_START_LIGHT_AVAIL=0.000000
set1_AB_OVH_SEATBELT=0.000000
set1_AB_OVH_NO_SMOKING=0.000000
set1_AB_OVH_EMER_LT=0.000000
set1_AB_OVH_EMER_Button=0.000000
set1_AB_OVH_LIGHTS_ANN_TEST=0.000000
set1_AB_MPL_FD=0.000000
set1_AB_MPL_ILS=0.000000
set1_AB_MPL_ND_CSTR=0.000000
set1_AB_MPL_ND_WPT=0.000000
set1_AB_MPL_ND_VOR=0.000000
set1_AB_MPL_ND_NDB=0.000000
set1_AB_MPL_ND_ARPT=0.000000
set1_AB_MPL_ND_TERR=0.000000
set1_AB_MPL_Baro_Unit=0.000000
set1_AB_MPL_Baro_set=0.000000
set1_AB_MPL_Baro_STD=0.000000
set1_AB_MPL_HDG-TRK=0.000000
set1_AB_MPL_ND_Mode=0.000000
set1_AB_MPL_ND_Range=0.000000
set1_AB_MPL_ND_Arrow1=0.000000
set1_AB_MPL_ND_Arrow2=0.000000
set1_Mod_Xponder_mode=0.000000
set1_AB_STDBYCompass_anim=0.000000
set1_AB_AP_SPDMACH_but=0.000000
set1_AB_AP_SPDMACH=0.000000
set1_AB_AP_SPDmode=0.000000
set1_AB_AP_SPEEDset=0.000000
set1_AB_AP_HDGmode=0.000000
set1_AB_AP_HDGset=0.000000
set1_AB_AP_HDGTRK_but=0.000000
set1_AB_AP_HDGTRK=0.000000
set1_AB_AP_ALTmode=0.000000
set1_AB_AP_ALTset=0.000000
set1_AB_AP_ALTSTEP=0.000000
set1_AB_AP_LOC=0.000000
set1_AB_AP_LOC2=0.000000
set1_AB_AP_EXP=0.000000
set1_AB_AP_AP1=0.000000
set1_AB_AP_AP2=0.000000
set1_AB_AP_ATHR=0.000000
set1_AB_AP_VSlevel=0.000000
set1_AB_AP_VSset=0.000000
set1_Mod_Com_Both1=0.000000
set1_Mod_Com_Both2=0.000000
set1_ADF2_toggle=0.000000
set1_Mod_Markertest=0.000000
set1_AB_MPL_Master_Warning=0.000000
set1_Flightmode=0.000000
set1_AB_ECAM_TOconf=0.000000
set1_TO_firststartbypass=0.000000
set1_TO_Memo_normal=0.000000
set1_LDG_Memo_enable=0.000000
set1_LDG_Memo=0.000000
set1_EngL_Oil_qty=0.000000
set1_EngL_Oil_qty_target=0.000000
set1_EngR_Oil_qty=0.000000
set1_EngR_Oil_qty_target=0.000000
set1_Flaps_handle_index_hist=0.000000
set1_Flap1_mode=0.000000
set1_MCDU_cones=0.000000
set1_MCDU_Wheelchocks=0.000000
set1_AB_OVH_PACKFLOWCTR=0.000000
set1_PackturboutL_Temp=0.000000
set1_PackturboutR_Temp=0.000000
set1_PackfinalL_Temp=0.000000
set1_PackfinalR_Temp=0.000000
set1_Hotaircontrolvalve_auto_close=0.000000
set1_AB_OVH_ZONETEMP1_target=0.000000
set1_AB_OVH_ZONETEMP2_target=0.000000
set1_AB_OVH_ZONETEMP3_target=0.000000
set1_AB_OVH_ZONETEMP1_disp=0.000000
set1_AB_OVH_ZONETEMP2_disp=0.000000
set1_AB_OVH_ZONETEMP3_disp=0.000000
set1_BleedL_Pressure=0.000000
set1_BleedR_Pressure=0.000000
set1_EngL_bleedair=0.000000
set1_EngR_bleedair=0.000000
set1_Eng1_HP_Valve=0.000000
set1_Eng2_HP_Valve=0.000000
set1_BleedL_Ptarget=0.000000
set1_BleedR_Ptarget=0.000000
set1_XBleed_Valve=0.000000
set1_APU_Bleedair=0.000000
set1_APU_Bleedair_Pressure=0.000000
set1_DC_BATBUS_Avail=0.000000
set1_BAT_HOTBUS1_Avail=0.000000
set1_BAT_HOTBUS2_Avail=0.000000
set1_APUGENSTATE=0.000000
set1_APU_avail=0.000000
set1_EXT_Avail=0.000000
set1_AC1_Conf=0.000000
set1_AC2_Conf=0.000000
set1_AC_ESS_Avail=0.000000
set1_DC1_Avail=0.000000
set1_DC2_Avail=0.000000
set1_DC_ESS_Avail=0.000000
set1_IDG1_Temp_set=0.000000
set1_IDG1_Temp_current=0.000000
set1_IDG2_Temp_set=0.000000
set1_IDG2_Temp_current=0.000000
set1_APU_Load=0.000000
set1_EMER_Avail=0.000000
set1_ENG1_N1_2min=0.000000
set1_ENG2_N1_2min=0.000000
set1_Centertank_low_level=0.000000
set1_Centertank_lo_level_timer_start=0.000000
set1_Centertank_lo_level_set=0.000000
set1_Centertank_lo_level_val=0.000000
set1_Fuel_Tank_center_qty_check=0.000000
set1_Fuel_leftinner_qty=0.000000
set1_Fuel_leftouter_qty=0.000000
set1_Fuel_rightinner_qty=0.000000
set1_Fuel_rightouter_qty=0.000000
set1_Fuel_temperature=0.000000
set1_Fuel valve state=0.000000
set1_Hyd_press_mode=0.000000
set1_Green_hyd_press_avail=0.000000
set1_Green_hyd_press_target=0.000000
set1_Blue_hyd_press_target=0.000000
set1_Yellow_hyd_press_avail=0.000000
set1_Yellow_hyd_press_target=0.000000
set1_Green_Pressure=0.000000
set1_Blue_Pressure=0.000000
set1_Yellow_Pressure=0.000000
set1_HYD_RSVR_PRESS_target=0.000000
set1_HYD_G_RSVR_PRESS=0.000000
set1_HYD_Y_RSVR_PRESS=0.000000
set1_HYD_B_RSVR_PRESS=0.000000
set1_ASC_Autobrake_position=0.000000
set1_AB_BRK_FAN=0.000000
set1_Left1_wheel_temp_target=0.000000
set1_Left2_wheel_temp_target=0.000000
set1_Right3_wheel_temp_target=0.000000
set1_Right4_wheel_temp_target=0.000000
set1_Left1_wheel_temp=0.000000
set1_Left2_wheel_temp=0.000000
set1_Right3_wheel_temp=0.000000
set1_Right4_wheel_temp=0.000000
set1_Gearpos_hist=0.000000
set1_ASC_Antiskid=0.000000
set1_Left_wheel_RPM_hist=0.000000
set1_Right_wheel_RPM_hist=0.000000
set1_Wheel_decel=0.000000
set1_Flightmode_5to6_starttimer_start=0.000000
set1_Flightmode_5to6_set=0.000000
set1_Flightmode_5to6_starttimer_val=0.000000
set1_Flightmode_5to6_2min=0.000000
set1_Ecam_APU_Mode_hist_set=0.000000
set1_ECAM_APU_Mode_hist=0.000000
set1_ECAM_CALL_MODE_hist=0.000000
set1_ECAM_APU_mode=0.000000
set1_ECAM_APUM_starttimer_start=0.000000
set1_ECAM_APUM_starttimer_val=0.000000
set1_ECAM_ENGM_starttimer_start=0.000000
set1_ECAM_ENGM_set=0.000000
set1_ECAM_ENGM_starttimer_val=0.000000
set1_ECAM_ENG_Mode_hist=0.000000
set1_Ecam_ENG_Mode_hist_set=0.000000
set1_ECAM_Mode=0.000000
set1_ASC_Landinggear=0.000000
set1_ASC_Parkbrake=0.000000
set1_ASC_Beaconlight=0.000000
set1_ASC_Strobelight=0.000000
set1_ASC_Panellight=0.000000
set1_ASC_Markersound=0.000000
set1_ASC_Spoiler_Pos=0.000000
set1_ASC_Spoiler_armed=0.000000
set1_ASC_Flaps_Pos=0.000000
set1_ASC_Throttlepos_L=0.000000
set1_ASC_Throttlepos_R=0.000000
set1_ASC_Elevatortrim=0.000000
set1_ASC_Ailerontrim=0.000000
set1_ASC_Ruddertrim=0.000000
set1_ASC_Com1_Afrq=0.000000
set1_ASC_Com2_Afrq=0.000000
set1_ASC_Com1_Sfrq=0.000000
set1_ASC_Com2_Sfrq=0.000000
set1_ASC_Nav1_Afrq=0.000000
set1_ASC_Nav2_Afrq=0.000000
set1_ASC_Nav1_Sfrq=0.000000
set1_ASC_Nav21_Sfrq=0.000000
set1_ASC_ADF1_Afrq=0.000000
set1_ASC_ADF2_Afrq=0.000000
set1_ASC_Xpondernumber=0.000000
set1_ASC_Navsound1=0.000000
set1_ASC_Navsound2=0.000000
set1_ASC_ADFsound1=0.000000
set1_ASC_ADFsound2=0.000000
set1_AB_OVH_LIGHTS_RWYTURNOFF=0.000000
set1_Landlight_switch=0.000000
set1_AB_TAXI_LT=0.000000
set1_Strobe_light=0.000000
set1_AB_OVH_GPWS_TERR=0.000000
set1_AB_OVH_GPWS_SYS=0.000000
set1_AB_OVH_GPWS_GSMODE=0.000000
set1_AB_OVH_GPWS_FLAPMODE=0.000000
set1_AB_GPWS_MAIN_BUTTON=0.000000
set1_AB_AP_AP1_hist=0.000000
set1_AB_AP_AP2_hist=0.000000
set1_AP_OFF_Zkey=0.000000
set1_AB_AP_ATHR_hist=0.000000
set1_AB_AP_HDGmode_set=0.000000
set1_AB_AP_ALTmode_set=0.000000
set1_AB_AP_SPDmode_set=0.000000
set1_AB_AP_ALT_Select=0.000000
set1_AB_AP_ALT_Select_hist=0.000000
set1_AB_AP_HDG_Select=0.000000
set1_AB_AP_SPEED_Select=0.000000
set1_AB_AP_Mach_Select=0.000000
set1_Speed_Set=0.000000
set1_Mach_Set=0.000000
set1_AP_LOC_Mode_On=0.000000
set1_MCDU_Cruisealt=0.000000
set1_MCDU_VNAV_Start_Descend=0.000000
set1_AP_APPR_Mode_On=0.000000
set1_FCU_Takoff_set_HDG=0.000000
set1_FCU_Takoff_set_ALT=0.000000
set1_Throttle_ani_fix_L=0.000000
set1_Throttle_ani_fix_R=0.000000
set1_Throttle_ani_var_L=0.000000
set1_Throttle_ani_var_R=0.000000
set1_Max_rated_N1_L=0.000000
set1_Max_rated_N1_R=0.000000
set1_FMA_Latmode_act=0.000000
set1_FMA_Latmode_arm=0.000000
set1_FMA_Vertmode_act=0.000000
set1_FMA_Vertmode_arm=0.000000
set1_FMA_THRmode=0.000000
set1_FMA_THRmode_2nd_line_CLB=0.000000
set1_FMA_THRmode_2nd_line_ASYM=0.000000
set1_FMA_THRmode_2nd_line_THR_LK=0.000000
set1_ASC_AUTOPILOT MASTER=0.000000
set1_ASC_AUTOPILOT FLIGHT DIRECTOR ACTIVE=0.000000
set1_ASC_AUTOPILOT ALTITUDE LOCK=0.000000
set1_ASC_AUTOPILOT ALTITUDE LOCK VAR=0.000000
set1_ASC_AUTOPILOT VERTICAL HOLD VAR=0.000000
set1_ASC_AUTOPILOT HEADING LOCK DIR=0.000000
set1_ASC_AUTOPILOT AIRSPEED HOLD VAR=0.000000
set1_ASC_AUTOPILOT MACH HOLD VAR=0.000000
set1_ASC_AUTOPILOT NAV1 LOCK=0.000000
set1_ASC_AUTOPILOT HEADING LOCK=0.000000
set1_ASC_AUTOPILOT APPROACH HOLD=0.000000
set1_ASC_AUTOPILOT AIRSPEED HOLD=0.000000
set1_ASC_AUTOPILOT MACH HOLD=0.000000
set1_ASC_AUTOPILOT VERTICAL HOLD=0.000000
set1_ASC_AUTOPILOT THROTTLE ARM=0.000000
set1_ASC_GPS DRIVES NAV1=0.000000
set1_MCDU1_Page=0.000000
set1_Cones=0.000000
set1_Wheelchocks=0.000000
set1_MCDU_EXTPOWERCART=0.000000
set1_MCDU_EXTPOWER=0.000000
set1_MCDU_Fl=0.000000
set1_MCDU_Sl=0.000000
set1_MCDU_GrDot=0.000000
set1_MCDU_V1_ENT=0.000000
set1_MCDU_V1=0.000000
set1_MCDU_VR_ENT=0.000000
set1_MCDU_VR=0.000000
set1_MCDU_V2_ENT=0.000000
set1_MCDU_V2=0.000000
set1_MCDU_FLAPS_ENT=0.000000
set1_MCDU_FLAPS=0.000000
set1_MCDU_Transalt_ENT=0.000000
set1_MCDU_Trans_alt=0.000000
set1_MCDU_TOFLX_ENT=0.000000
set1_MCDU_TOFLX=0.000000
set1_MCDU_Ci_ENT=0.000000
set1_MCDU_Ci=0.000000
set1_MCDU_Speed_set=0.000000
set1_MCDU_TotalFuelburn=0.000000
set1_MCDU_APP_QNH_ENT=0.000000
set1_MCDU_APP_QNH=0.000000
set1_MCDU_APP_TEMP_ENT=0.000000
set1_MCDU_APP_TEMP=0.000000
set1_MCDU_APP_MDA_ENT=0.000000
set1_MCDU_APP_MDA=0.000000
set1_MCDU_APP_DH_ENT=0.000000
set1_MCDU_APP_DH=0.000000
set1_MCDU_APP_LDGCONF_ENT=0.000000
set1_MCDU_APP_LDGCONF_FULL=0.000000
set1_MCDU_APP_LDGCONF=0.000000
set1_VAPP_autocalc=0.000000
set1_MCDU_DEPARR_ENT=0.000000
set1_MCDU_FLTNMBR_ENT=0.000000
set1_MCDU_AlignIRS_ENT=0.000000
set1_MCDU_IRSAligned=0.000000
set1_MCDU_LAT_IRSaligned=0.000000
set1_MCDU_LON_IRSaligned=0.000000
set1_MCDU_CRZData_ENT=0.000000
set1_MCDU_Taxifuel_ENT=0.000000
set1_MCDU_Taxifuel=0.000000
set1_MCDU_ZFW_ENT=0.000000
set1_MCDU_ZFW=0.000000
set1_MCDU_BLOCK_ENT=0.000000
set1_MCDU_BLOCK=0.000000
set1_MCDU_RTERSV_ENT=0.000000
set1_MCDU_RTERSV=0.000000
set1_MCDU_FINALTM_ENT=0.000000
set1_MCDU_FINALTM=0.000000
set1_MCDU1_POS_Upd_Freeze=0.000000
set1_MCDU_VOR1Freq_ENT=0.000000
set1_MCDU_VOR2Freq_ENT=0.000000
set1_MCDU_VOR1CRS_ENT=0.000000
set1_MCDU_NAV1_CRS=0.000000
set1_MCDU_VOR2CRS_ENT=0.000000
set1_MCDU_NAV2_CRS=0.000000
set1_MCDU_ADF1Freq_ENT=0.000000
set1_MCDU_ADF2Freq_ENT=0.000000
set1_AB_PDS_RADIO_POWER=0.000000
set1_AB_MPL_ECAML_Power=0.000000
set1_AB_MPL_ECAMU_Power=0.000000
set1_AB_MPL_PFD_Power=0.000000
set1_AB_MPL_ND_Power=0.000000
set1_MCDU_descend_ready=0.000000
set1_ASC_Engines_running=0.000000
set1_ASC_Winglight=0.000000
set1_ASC_Navlight=0.000000
set1_ASC_Logolight=0.000000
set1_ASC_FBW_FAC_1=0.000000
set1_ASC_FBW_FAC_2=0.000000
set1_ASC_FBW_ELAC_1=0.000000
set1_ASC_FBW_ELAC_2=0.000000
set1_ASC_FBW_SEC_1=0.000000
set1_ASC_FBW_SEC_2=0.000000
set1_ASC_FBW_SEC_3=0.000000
set1_AB_Cabindoor3_toggle=0.000000
set1_AB_Cabindoor3_target=0.000000
set1_AB_Cabindoor4_toggle=0.000000
set1_AB_Cabindoor4_target=0.000000
set1_ASC_MCDU_cones=0.000000
set1_ASC_MCDU_Wheelchocks=0.000000
set1_ASC_MCDU_EXTPOWERCART=0.000000
set1_ASC_MCDU_EXTPOWER=0.000000
set1_ASC_Exit_0=0.000000
set1_ASC_Exit_1=0.000000
set1_ASC_Exit_2=0.000000
set1_ASC_Exit_3=0.000000
set1_ASC_Kohlsmann=0.000000
set1_AB_OVH_GPWS_LDGFLAP3=0.000000
set1_ASC_APU_avail=0.000000
set1_FBW_ELAC_1=0.000000
set1_FBW_ELAC_2=0.000000
set1_MCDU_approach_activate=0.000000
set1_Approach_auto=0.000000
set1_THR_RED_ACC=0.000000
set1_ASC_AB_SND_CAB=0.000000
set1_ASC_AB_SND_FC=0.000000
set1_ASC_AB_SND_ATC=1.000000
set1_ASC_AB_Enh_GPWS=1.000000
set1_ASC_Panelbar_Mode_2D=0.000000
set1_ASC_Panelbar_Snd_Mute=0.000000
set1_ASC_Panelbar_Left_Init=0.000000
set1_ASC_Panelbar_Off=0.000000
set1_ASC_Wingviewbar_On=1.000000
set1_AB_MPL_ND_Bright=0.000000
set1_AB_OVH_IRS1_KNOB=0.000000
set1_AB_OVH_IRS2_KNOB=0.000000
set1_AB_OVH_IRS3_KNOB=0.000000
set1_AB_OVH_IRS1_BUT=0.000000
set1_AB_OVH_IRS2_BUT=0.000000
set1_AB_OVH_IRS3_BUT=0.000000
set1_AB_OVH_ADR1=0.000000
set1_AB_OVH_ADR2=0.000000
set1_AB_OVH_ADR3=0.000000
set1_IRS1_Align_state=0.000000
set1_IRS2_Align_state=0.000000
set1_IRS3_Align_state=0.000000
set1_IRS_AlignPrompt_MCDU=0.000000
set1_IRS_Align_MCDU_LSK=0.000000
set1_IRS_Align_MCDU_enabled=0.000000
set1_IRS_AlignTime_Memo=0.000000
set1_IRS_Align_Memo=0.000000
set1_IRS1_AlignSet=0.000000
set1_IRS2_AlignSet=0.000000
set1_IRS3_AlignSet=0.000000
set1_IRS1_Align_timer_start_set=0.000000
set1_IRS2_Align_timer_start_set=0.000000
set1_IRS3_Align_timer_start_set=0.000000
set1_IRS1_Align_timer_start_val=0.000000
set1_IRS2_Align_timer_start_val=0.000000
set1_IRS3_Align_timer_start_val=0.000000
set1_IRS_ShowPos_MCDU=0.000000
set1_IRS_PFD_ND_Out=0.000000
set1_IRS_NOT_Align=0.000000
set1_ASC_AB_CL_Infobar=1.000000
set1_ASC_AB_AES_On=0.000000
set1_ASC_FBWAutoRudGnd=0.000000
set1_ASC_CP_App_Speedbrake=0.000000
set1_ASC_AB_250Kt_Limiter=0.000000
set1_ASC_AB_TOD_Pause_On=0.000000
set1_ASC_AB_NextWP_Pause_On=0.000000
set1_ASC_ViewSys_Off=0.000000
set1_ASC_Landinglight=0.000000
set1_ASC_AB_FDR_On=0.000000
set1_AP_FADEC_IDLTHR=0.000000
set1_AP_FADEC_CLBTHR=0.000000
set1_AB_AP_HDGmode_setDisp=0.000000
set1_AP_AP_ALT_Mode99=0.000000
set1_AP_AP_ALT_Mode=0.000000
set1_AB_AP_ALT_Selected_LOG=0.000000
set1_ASC_AB_AP_KNOBALT=0.000000
set1_AB_ACFTState_Default=2.000000
set1_AB_OVH_Dome_Light=0.000000
set1_ASC_CL_State=0.000000
set1_ASC_CL_HotKey_Off=0.000000
set1_AB_MPL_NDTERR_Bright=0.000000
set1_Mod_Xponder_mode_knob=0.000000
set1_ASC_TO_Memo_normal=0.000000
set1_Autobrake_position=0.000000
set1_FLAPS_LVR=0.000000
set1_AB_PDS_Xponder_ABW_NOR_BLW=0.000000
set1_ASC_Vol_Batteries=95.000000
set1_ASC_Vol_Avionics=95.000000
set1_ASC_Vol_Cooling=92.000000
set1_ASC_Vol_GPWS=100.000000
set1_ASC_Vol_Checklist_PF=98.000000
set1_ASC_Vol_Checklist_PnF=97.000000
set1_ASC_Vol_ATC=58.000000
set1_ASC_Vol_CabinCrew=93.000000
set1_AB_WX_SYS=0.000000
set1_AB_WX_GAIN=0.000000
set1_AB_WX_TILT=0.000000
set1_MCDU_ILS1=0.000000
set1_MCDU_ILS1_CRS=0.000000
set1_MCDU_VOR1=0.000000
set1_MCDU_VOR1_CRS=0.000000
set1_MCDU_VOR2=0.000000
set1_MCDU_ADF1=0.000000
set1_ASC_Vol_GroundCrew=90.000000
set1_ASC_Kohlsmann2=0.000000
set1_AB_WX_GCS=0.000000
set1_AB_WX_MULTI_AUTO=0.000000
set1_ASC_Load_Pax=0.000000
set1_ASC_Load_Cargo=0.000000
set1_ASC_Load_Fuel=0.000000
set1_ASC_filetoload=0.000000
set1_ABRK_MJ_ACCULUMATOR_R=0.000000
set1_ABRK_MJ_ACCULUMATOR_L=0.000000
set1_LowECAM_Page=0.000000
set1_ASC_AB_Tiller_Enabled=0.000000
set1_AB_AP_SPEED_Selected=0.000000
set1_AB_AP_Mach_Selected=0.000000
set1_Table2_pos=0.000000
set1_ASC_AP_HDGmode_Load=0.000000
set1_ASC_FCU_Managed_HDGdisp_override=0.000000
set1_AB_AP_ALT_Selected_LOG2=0.000000
set1_AB_AP_ALT_Selected_LOG2_hist=0.000000
set1_AB_AP_ALT_Selected_LOG2_hist2=0.000000
set1_ASC_AB_AP_VS_Select2=0.000000
set1_ASC_AB_AP_VSset=0.000000
set1_ASC_AB_AP_SPEED_Selected=0.000000
set1_AB_AP_VdevAlt_hist=0.000000
set1_AB_AP_VdevAlt_hists=0.000000
set1_AB_AP_VdevAlt_histss=0.000000
set1_DESDist22=0.000000
set1_AB_AP_ALT_Selected_VdevLast=0.000000
set1_MCDU_WPT_DEST_Dist_LAST=0.000000
set1_AB_AP_VdevFPAIAS=0.000000
set1_VDEV_SPDC=0.000000
set1_VDEV_SPDC_histlast=0.000000
set1_LOOPAPLOGIC=0.000000
set1_AB_AP_ALT_Selected_LOG2_POS=0.000000
set1_MCDU_VNAV_DistSP=0.000000
set1_0MCDU_WPT_DEST_Dist=0.000000
set1_0MCDU_WPT_ALTCSTR_COND1_Dist_DES=0.000000
set1_0MCDU_WPT_ALTCSTR_COND2_Dist_DES=0.000000
set1_0MCDU_WPT_ALTCSTR_COND3_Dist_DES=0.000000
set1_0MCDU_WPT_ALTCSTR_COND4_Dist_DES=0.000000
set1_AB_AP_VNAVDIST2=0.000000
set1_AB_AP_VNAVDIST99=0.000000
set1_AB_AP_VNAVDIST_FINAL=0.000000
set1_AB_AP_VdevAlt=0.000000
set1_DESDist=0.000000
set1_DESDist2=0.000000
set1_GEODESCEND=0.000000
set1_MCDU_TOD2DEST_DIST=0.000000
set1_MCDU_TOD_DIST=0.000000
set1_AP_VDEV_SPDADD=0.000000
set1_MCDU_WPT_ALTCSTR_COND1_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND2_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND3_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND4_DES=0.000000
set1_COND1_DES_HIS_C=0.000000
set1_COND2_DES_HIS_C=0.000000
set1_COND3_DES_HIS_C=0.000000
set1_COND4_DES_HIS_C=0.000000
set1_DONT_UPDATE=0.000000
set1_DONT_UPDATE2=0.000000
set1_1MCDU_WPT_ALTCSTR_COND1_Dist_DES=0.000000
set1_1MCDU_WPT_ALTCSTR_COND2_Dist_DES=0.000000
set1_1MCDU_WPT_ALTCSTR_COND3_Dist_DES=0.000000
set1_1MCDU_WPT_ALTCSTR_COND4_Dist_DES=0.000000
set1_AP_VDEV_DIF=0.000000
set1_AP_VDEV_ROC=0.000000
set1_AB_AP_SPEED_Selected_SM=0.000000
set1_AB_AP_MACHTAS_DES=0.000000
set1_AB_AP_SpdTAS_DES=0.000000
set1_MCDU_WPT_SPDCSTR_2=0.000000
set1_BSELCSPDCDist=0.000000
set1_BLOWCOMPFPA=0.000000
set1_BCONDCOMPFPA=0.000000
set1_MCDU_VNAV_Dist=0.000000
set1_ASC_UPD_BF=0.000000
set1_AB_AP_ATHR_Target=0.000000
set1_AP_ATHRSpdDif=0.000000
set1_AP_ATHRDif=0.000000
set1_COND1_Dist_DES_HIS=0.000000
set1_COND2_Dist_DES_HIS=0.000000
set1_COND3_Dist_DES_HIS=0.000000
set1_COND4_Dist_DES_HIS=0.000000
set1_MCDU_WPT_ALTCSTR_COND1_Dist_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND2_Dist_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND3_Dist_DES=0.000000
set1_MCDU_WPT_ALTCSTR_COND4_Dist_DES=0.000000
set1_COND1_Dist_DES_SM=0.000000
set1_COND2_Dist_DES_SM=0.000000
set1_COND3_Dist_DES_SM=0.000000
set1_COND4_Dist_DES_SM=0.000000
set1_COND1_Dist_DES_CM=0.000000
set1_COND2_Dist_DES_CM=0.000000
set1_COND3_Dist_DES_CM=0.000000
set1_COND4_Dist_DES_CM=0.000000
set1_AB_WX_MODE=0.000000
set1_ThrottleDetend_CheckL=0.000000
set1_ThrottleDetend_CheckR=0.000000
set1_AB_Stdb_Baro_STD=0.000000
set1_ASC_MCDU_Trans_alt_mem=0.000000
set1_ASC_AB_Sim_detect=0.000000
set1_CL_PF_AP1_On=0.000000
set1_CL_PF_AP2_On=0.000000
set1_CL_PF_APOff=0.000000
set1_ASC_MCDU2_Page=0.000000
set1_Enable_MCDU2_Scratchpad=0.000000
set1_ASC_AB_CL_Auto=0.000000
set1_ASC_AB_Copilot=0.000000
set1_MCDU_DIR_RDL_NAVARM=0.000000
set1_MCDU_SEL_Mach=0.000000
set1_AB_AP_CSTR_DIST=0.000000
set1_AB_AP_SPEED_Select_hist=0.000000
set1_AB_AP_Mach_Select_hist=0.000000
set1_AB_AP_VS_Select3=0.000000
set1_AB_AP_VNAVFPAMach_fx=0.000000
set1_AB_AP_VNAV_X=0.000000
set1_DES_DESCYC_COUNTER=0.000000
set1_AB_AP_DESDIST2=0.000000
set1_AB_AP_DES_ENERGY=0.000000
set1_COND4_CALCOPT=0.000000
set1_AB_AP_ALT_Lowest=0.000000
set1_ABVALGRCLEAN=0.000000
set1_ABVALGRCSTR250=0.000000
set1_ABVALGR250=0.000000
set1_AB_AP_TOC_Mach=0.000000
set1_AB_AP_TOCMach_fx=0.000000
set1_Orig_DESDist=0.000000
set1_Orig_DESDist2=0.000000
set1_0CSTRAlt=0.000000
set1_LOOPAPLOGIC2=0.000000
set1_AP_AP_ALT_Capture=0.000000
set1_AB_AP_ALT_Selected=0.000000
set1_AB_AP_ALT_Caphist=0.000000
set1_MCDU_TO_F=0.000000
set1_MCDU_TO_S=0.000000
set1_MCDU_TO_0=0.000000
set1_MCDU_WPT_DEST_Dist=0.000000
set1_MCDU_Decel2Dest_Dist=0.000000
set1_MCDU_APP_VLS=0.000000
set1_MCDU_APP_VAPP=0.000000
set1_MCDU_APP_HW=0.000000
set1_MCDU_ECON_SPD_DES=0.000000
set1_MCDU_SEL_SPD=0.000000
set1_MCDU_Early_DES=0.000000
set1_MCDU_ApprActivated=0.000000
set1_MCDU_THR_ACC=0.000000
set1_MCDU_THR_RED=0.000000
set1_MCDU_FLT_PHS=0.000000
set1_MCDU_NxtWP_Dist=0.000000
set1_MCDU_RDL_INTCPT=0.000000
set1_MCDU_CrossTrackError=0.000000
set1_MCDU_DIR_TO_PRESSED=0.000000
set1_MCDU_WPT_ALTCSTR_COND=0.000000
set1_MCDU_WPT_ALTCSTR2=0.000000
set1_MCDU_WPT_SPDCSTR_DIST=0.000000
set1_MCDU_FAF2Dest_Dist=0.000000
set1_MCDU_WPT_ALTCSTR_COND2_FIN=0.000000
set1_MCDU_WPT_ALTCSTR_COND2_FIN_Dist=0.000000
set1_MCDU_1STMAP_ALTCSTR=0.000000
set1_MCDU_PPOS=0.000000
set1_MCDU_DepTrans_alt=0.000000
set1_AB_AP_MCDU_RWYALT=0.000000
set1_AB_AP_MCDU_RWYHDG=0.000000
set1_AB_AP_MCDU_RWYGSANGLE=0.000000
set1_Kohlsman_isis_Set=0.000000
set1_ASC_AB_MPL_CHRONO=0.000000
set1_ASC_AB_MPL_CHRONO_OFFSET=0.000000
set1_APU_PCT_RPM=0.000000
set1_ASC_PAX_Weight_KG=0.000000
 

 

The values are set to zero, which we know means "off."  But the conclusion I am making here is that somehow, if it is this specific chain of code that is our culprit, why does it paradoxically not appear to be the issue, given all the binary data here is written as "0" which we again, know means "off."

 

There is more:

It seems that even with the binary value saved as "0" on every line of code within this file (assuming this is the one causing our issue), why does the sim very briefly read every line in this file as a "1"  value for those quick 5 seconds that practically every system on the airplane up and including to the engines are on and functioning until quickly shutting down?  If the source of THAT issue can be allocated, then the parent problem we've been discussing can be completely eradicated and we can finally get our shutdown sounds working normally as they should.

 

PDMG, Captain Sim, FSLabs, Quality Wings, Wilco, BlackBox, and countless other programs I've used as aircraft addons can effectively load a cold and dark state without having all the systems running and on for a couple seconds before THEN shutting down.  Bear in mind that the skeleton in terms of the code and .cfg files for all these makes and models are somewhat the same, so if everybody else can do it to excellency, then there is no reason nor excuse as to why Aerosoft can't do it.  But for now, it's sadly up to the users to track down this issue themselves until we see a developer get up and do what they're supposed to do. 

 

Thanks again for your help!

 

 

Link to comment
Share on other sites

UPDATE:

 

So for the past two days, I have endlessly tried to solve this problem from the inside-out.  Working with new sound drivers, disconnecting and reconnecting the audio card, updating its drivers, re-writing the code, uninstalling and reinstalling both P3D V4 and the Aerosoft A320 Professional to absolutely no avail.

 

The reason I write this is to further convey my disappointment with the Aerosoft development team.  This specific issue roots all the way back to Aerosoft Extended  and if we go back and look at those forums, the "assistance" is blatantly rude and condescending and attempts to tackle this manner in the most unproductive of ways possible; almost as if we're a burden and inconvenience for asking questions in a forum specifically placed here for us to ask questions...

 

It's not my job to tell others how or when to do their jobs, but as a paying customer who's purchased more than what I listed a few comments ago from Aerosoft, I am absolutely entitled and will comment on the disgraceful levels of "assistance" and attitude towards other customers that I've witnessed and the minimal effort to address issues I have seen from the development team (case-in-point: the only person to respond to my first message was a user).

 

Mr. Kok, on a personal note, if you're reading this, I'd like you to re-evaluate how you talk to your customers.  You may not notice it, but as somebody whose viewed countless different topics and threads that you are a part of just for the interest of it, your tone and in the way you speak to your customers leaves me shaking my head and in utter disgust sometimes.  How customers continue to keep giving you and your development team money and how you are still in-charge of this charade is mind-boggling.

 

At the end of the day, this isn't about me not having my shutdown sounds.  It's about the complete lack of respect we receive as paying customers.  The way we see the development team speak to customers with questions, the way we see the head of this circus speaking to customers...  I recommend you all take a course on hospitality and humanities, maybe it will help...

 

I am an extremely level headed individual who firmly believes that kindness and respect wins an individual anything they want in this world.  That being said... when somebody crosses me or I see unwarranted levels of disrespect towards others, I will absolutely call you out on the parasite you are.  I will no longer be giving Aerosoft a single dime of my hard earned money from this day forth.  I don't care if the issues get fixed or not.  This team should learn more about respect and customer service from those over at development teams like Quality Wings and Captain Sim: among the nicest and most helpful teams I have ever had to deal with.

 

To all at Aerosoft: please learn the human principles of respect.  Farewell.

Link to comment
Share on other sites

You probably know more about the sound in our aircraft than any of our developers. In fact, I've asked direct questions of our developers regarding sound and I have never once received a single answer.

 

The developers don't really monitor the forums, that's up to people like me.  If we get questions that we can't answer then we go to them.  If they won't or can't answer then we can't answer you, parasites that we are.

 

I found that the Airbus seems to be using some internal sound system which modifies sounds.  I havne't found the bloody thing yet, but I'm working on it.  Our developers must not know anything about it.

 

So, as you walk away, just know that some of us have tried.

Link to comment
Share on other sites

vor 33 Minuten, DaveCT2003 sagte:

So, as you walk away, just know that some of us have tried.

I will continue my searching :D

 

The really strange thing what i just right now found out, I have 0 issue in the A330 but all the ASC files are compared and the same as in the A32x

Link to comment
Share on other sites

5 minutes ago, Bernd E. said:

I will continue my searching :D

 

The really strange thing what i just right now found out, I have 0 issue in the A330 but all the ASC files are compared and the same as in the A32x

 

I'm aware. I can only guess its the separate sound engine but I'm not able to access it yet.

 

Link to comment
Share on other sites

vor 10 Stunden , DaveCT2003 sagte:

 

I'm aware. I can only guess its the separate sound engine but I'm not able to access it yet.

 

 

I just disabled the ASC.cfg and the ASC.dll which I guess contains the internal sound system.

Shutdown sound wasn't playing either.

Link to comment
Share on other sites

I would honestly stop messing about with it, and give me time to work with the Boss and TSS on this.  I suspect that TSS did everything and we just created the paths to the sound files. Something is certainly amiss, I have several bug reports in for sounds.

 

I'll tell you this though.  Aerosoft, along with other developers, has been put through the wringer with P3Dv4, especially P3Dv5 and of course MSFS.  I have a list of every change made on the Airbus Professional and it's been brutal.  Moreover, not one customer has ever been charged for any of this work the lads are doing, and Mathijs is the guy holding it all together.  Compared to the issues we've been dealing with, small sound issues while important, in the big scheme of things they don't rank up there with other matters the boss has been working. 

 

This coming week will be very full for Mathijs, but I'll try to get up with him late in the week and see what we can do about these sound issues.  I'll ask him to post here after we've spoken.

 

 
 

 

 

Link to comment
Share on other sites

Don't know if this is related but when I start the A330 the proper way using the ENG Start switch and then the master switches, my VA ACARS program shows some oddities. I start with Engine 1, and it comes up and running as normal and this is noted in my VA ACARS program.  Once stabilized, I begin the start sequence for Engine 2. When I do this, the ACARS program records that Engine 2 is ON, then it shows Engine 2 OFF, then it shows Engine 2 ON again.

 

So if shutdown sounds are only getting triggered once, maybe something is broken in the formal start sequence coding. When I start the engines using the CTRL+E work-around mentioned previously in this thread, my ACARS program records Engine 1 ON, then Engine 2 ON with no Engine OFF note in between and I will later get the shutdown sounds at my destination. Listed below is how the ACARS program recorded my engine starts and the corresponding times.

 

Time:

12:58:31 Engine 1 is on

12:59:23 Engine 2 is on

12:59:23 Engine 2 is OFF

12:59:23 Engine 2 is on

 

Engine 2 later stabilizes appropriately.  So, no clue if this is related to the triggering of shutdown sounds but I figured I'd post it in case it is.

Link to comment
Share on other sites

6 hours ago, Bigt said:

Don't know if this is related but when I start the A330 the proper way using the ENG Start switch and then the master switches, my VA ACARS program shows some oddities. I start with Engine 1, and it comes up and running as normal and this is noted in my VA ACARS program.  Once stabilized, I begin the start sequence for Engine 2. When I do this, the ACARS program records that Engine 2 is ON, then it shows Engine 2 OFF, then it shows Engine 2 ON again.

 

So if shutdown sounds are only getting triggered once, maybe something is broken in the formal start sequence coding. When I start the engines using the CTRL+E work-around mentioned previously in this thread, my ACARS program records Engine 1 ON, then Engine 2 ON with no Engine OFF note in between and I will later get the shutdown sounds at my destination. Listed below is how the ACARS program recorded my engine starts and the corresponding times.

 

Time:

12:58:31 Engine 1 is on

12:59:23 Engine 2 is on

12:59:23 Engine 2 is OFF

12:59:23 Engine 2 is on

 

Engine 2 later stabilizes appropriately.  So, no clue if this is related to the triggering of shutdown sounds but I figured I'd post it in case it is.

 

 

There was a post about this same thing sometime last year or maybe the year before.  It's here in the forum, maybe search for ACARS?  I'd do it for you, but I'm reinstalling Windows and everything else right now.

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use