Alexcoller 0 Posted June 2, 2019 Share Posted June 2, 2019 Hello, after the latest version the airbus starts shaking on approach, like the rudders, elevators are going crazy. This already happens when the latest version was experimental, so i rolled back to 1.2.3.0. But now i lost the 1.2.3.0 Version and i cant fly with the airbus anymore. Is this problem known? I most have 20-35 fps. My specs: I7-7700k 4.8Ghz Nvidia GTX 1070TI 16Gb Ram Prepar3d is installed on a SSD. Please login to view this video. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted June 2, 2019 Deputy Sheriffs Share Posted June 2, 2019 This is typical for low fps or wind/turbulence influence. Are you using ActiveSky? Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 2, 2019 Author Share Posted June 2, 2019 As you can see in the video fps is not that low. And I am using ActiveSky. I did a flight without AS but still shaking, I am not sure if i was using AS in the video. Link to comment Share on other sites More sharing options...
Emi 5161 Posted June 2, 2019 Share Posted June 2, 2019 fps may notbe indicated low, but you can see a lot of stuttering. A stutter is nothing else than 0fps for a short while so that gives you the shaking. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 2, 2019 Author Share Posted June 2, 2019 Now was using the lowest settings but still shaking. Was 60+ fps during approach. Link to comment Share on other sites More sharing options...
Emi 5161 Posted June 2, 2019 Share Posted June 2, 2019 And no stutters whatsoever? As said, the fps indication might not be reliable. Stutters as in your video above can be enough. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 2, 2019 Author Share Posted June 2, 2019 When stutters has such an impact why didnt i have the problem with the 1.2.3.0 version of the airbus? Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 2, 2019 Share Posted June 2, 2019 Running your processor at 4.8GHz may be bottlenecking your 1070, but you would be the best judge of this (but I'd look at it). Did you clear your P3D Shaders after installing the most recent version of the Airbus? If you're running third party shaders, please disable them and try another flight. Bare in mind that the Airbus Pro is the only airliner i know of for P3Dv4+ that is specifically compiled for P3Dv4 and the aircraft is tied to the frame rates, so any performance issues are going to be readily apparent and cause problems such as you're seeing. I'm not saying this is what is causing the issue, but it's something to look at. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 2, 2019 Author Share Posted June 2, 2019 Ok i will try to clear the shaders. Thank you Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 3, 2019 Author Share Posted June 3, 2019 Unfortunately, I still have that shaking. Is there a possibility to rollback in the version? Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 3, 2019 Author Share Posted June 3, 2019 What I just noticed is that when the shaking starts during the approach and I do a go around, the shaking stops immediately. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 3, 2019 Aerosoft Share Posted June 3, 2019 Well, during the approach many scenery details are loaded and those are out of sight when you go around. So that would suit the idea it is based on FPS seriously. Link to comment Share on other sites More sharing options...
miquelpp 27 Posted June 3, 2019 Share Posted June 3, 2019 Hi Mathijs, can we expect any new experimental version , soon? Thanks. Miquel. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 3, 2019 Author Share Posted June 3, 2019 And how can you explain me this behaviour? Please login to view this video. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted June 3, 2019 Deputy Sheriffs Share Posted June 3, 2019 I've seen 2 things: - your fps are fluctuating between 0.4 fps and over 30 fps, which is not normal - more important the couatl error. So obviously something is wrong there. Fix this and try again. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 3, 2019 Share Posted June 3, 2019 I believe, based on the limited info we currently have, that Mathijs and Mopperle are spot on with their diagnosis. Do us a favor a post screen shots of your P3D settings, list any overclock settings, any third party shaders, and any P3D tweaks you're using. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 3, 2019 Author Share Posted June 3, 2019 In the first video had no tweaks. Today I added the affinity mask = 116 tweak and no shaders any more. My cpu is overclocked to 4.6Ghz with a voltage of 1.325. The couatl error should not be the problem. I dont know if we are nearing a solution at the moment. As I said some post ago that in the previous version(1.2.3.0) I didnt had problems like that. Since the experimental version of 1.2.4.0 I had this problems, then I swichted back to 1.2.3.0 than everything was fine. Now it is shaking again since the full release. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 4, 2019 Aerosoft Share Posted June 4, 2019 Alex, the settings are not abnormal (but you are asking a hell of a lot with those image quality setting, I would not even use them on a 2080 gpu) but like Otto said your sim more or less comes to a complete halt sometimes. Most likely there is some other process that locks up your system. It could very well be the couatl error that is causing this. Not a module we use. so we can't advise with that. As this is a visual issue and we have not changed anything visual in months I doubt this was caused by an update. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 4, 2019 Author Share Posted June 4, 2019 Find out something new. The shaking has nothing to do with the speed I am in, but with the speed i set on the autopilot. Please login to view this video. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted June 4, 2019 Deputy Sheriffs Share Posted June 4, 2019 And waht happens when you simply let the autopilot do his job and not entering manually the speed? Problem I see is that you are dialing in a speed below F speed. Also I'm wondering how you got it managed to have suddenly such a blurry landscape. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 4, 2019 Author Share Posted June 4, 2019 No shaking with manual speed control. https://www.youtube.com/watch?v=OFZk3-VH6Ac vor 3 Minuten, mopperle sagte: And waht happens when you simply let the autopilot do his job and not entering manually the speed? Problem I see is that you are dialing in a speed below F speed. Also I'm wondering how you got it managed to have suddenly such a blurry landscape. I was speeding with "Y", so the airport is out of range. Link to comment Share on other sites More sharing options...
klisura 92 Posted June 4, 2019 Share Posted June 4, 2019 Blurry landscape is due to affinitymask Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 4, 2019 Author Share Posted June 4, 2019 Shaking also happens after start until thrust to climb. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted June 4, 2019 Aerosoft Share Posted June 4, 2019 Alex that last image shows your simulator is hopelessly running behind with its tasks. The terrain is blurry. With your incredibly high display settings that does not suprise me. Listen, don't be angry but your problems are with the sim, not with the product, you have reported many problems we have not seen with any other customers, things like shaking related speed set etc. So the issue simply HAS to be your system. You also have COUATL problems that often affect other things in the sim. You can keep on making video's and showing images but that will not help. We KNOW what causes what you see. The reason simply is that the simulator is unable to calculate the FBW system. If you look at the video you see a sudden drop in FPS when the problem starts. It could be settings, tweaks, a wrecked file, a other add-on that causes problems, who knows, We do know it causes framerates below 1 and that cause the effects you see. No assistance or tweak from us will help. Please do not expect that, not going to happen. You will have to solve the issue with the sim. Link to comment Share on other sites More sharing options...
Alexcoller 0 Posted June 4, 2019 Author Share Posted June 4, 2019 vor 3 Stunden , Mathijs Kok sagte: Alex that last image shows your simulator is hopelessly running behind with its tasks. The terrain is blurry. With your incredibly high display settings that does not suprise me. Listen, don't be angry but your problems are with the sim, not with the product, you have reported many problems we have not seen with any other customers, things like shaking related speed set etc. So the issue simply HAS to be your system. You also have COUATL problems that often affect other things in the sim. You can keep on making video's and showing images but that will not help. We KNOW what causes what you see. The reason simply is that the simulator is unable to calculate the FBW system. If you look at the video you see a sudden drop in FPS when the problem starts. It could be settings, tweaks, a wrecked file, a other add-on that causes problems, who knows, We do know it causes framerates below 1 and that cause the effects you see. No assistance or tweak from us will help. Please do not expect that, not going to happen. You will have to solve the issue with the sim. I am not angry but quite disappointed. I showed you many situation where the plane doesn't behave like it should behave and just because I may be the only one with this problem, is it not worth to look if the problem may be in the plane? Then some thing like your sim is broken, your couatl error causes the shaking or your PC is overwhelmed cant be the only solutions as you can see in the youtube video there is a scenario where the plane is not shaking. And in the other videos it shows when the plane starts shaking. In no other situation the plane has this kind of behaviour. And you still dont answered my question which was why didnt I have this shaking in the 1.2.3.0 version? Because since then my simulator didnt changed much except new scenerys. vor 4 Stunden , klisura sagte: Blurry landscape is due to affinitymask As he said the blurry is due to affinitymask not a simulator which is hopelessly running behind with its tasks. I added the tweak to test something which obviously not helped but you asked me for the settings i used during the video so I listed it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.