Aerosoft Aerosoft Team [Inactive Account] 51558 Posted May 30, 2019 Aerosoft Share Posted May 30, 2019 As you will have seen we (or rather Rolf) worked hard to get our Busses compatible with GSX2. Now there might be a few loose ends here and there but it should work fine for standard operations. Check out this great video that explains all functions! Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 15, 2019 Share Posted July 15, 2019 hey so this works great when their is a gate but when at a stand using the bus to board pax the physical weight of the aircraft ends up wrong. It loads the weight correctly as you can see it going up on the lower ECAM for the 1st bus but the weight resets the actual weight of the aircraft when the first pax from the second bus comes on board. Meaning you effectively loose actual weight meaning having to instant load after gsx is finished to bump the weight back up. Hope this makes sense I can provide a video once i finish this flight. I did it exactly how your video shows. Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 15, 2019 Share Posted July 15, 2019 Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 17, 2019 Share Posted July 17, 2019 sooo any comment on this being fixed or at least known? Like I say when using a Jetway its just fine just an issue with multiple busses delivering pax. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 19, 2019 Author Aerosoft Share Posted July 19, 2019 At this moment I have no news on this. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted July 19, 2019 Deputy Sheriffs Share Posted July 19, 2019 Hello @matty260191, what version of the Airbus are you running? Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 21, 2019 Share Posted July 21, 2019 The very latest. @Mathijs Kok do you guys at least know what I'm saying? Do you acknowledge the issue? If not hopefully you see what i mean in the video. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted July 21, 2019 Share Posted July 21, 2019 1 hour ago, matty260191 said: The very latest. @Mathijs Kok do you guys at least know what I'm saying? Do you acknowledge the issue? If not hopefully you see what i mean in the video. We have had one other report of a SIMILAR issue. We'll take a close look at this during the upcoming week, and I'll personally get back to you in this thread. Thank you very much for your patience. Best wishes! Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted July 21, 2019 Deputy Sheriffs Share Posted July 21, 2019 1 hour ago, matty260191 said: The very latest. @Mathijs Kok do you guys at least know what I'm saying? Do you acknowledge the issue? If not hopefully you see what i mean in the video. I am sorry to bother you with this once again, but it’s important to know if it’s latest stable version (1.2.4.0) or the latest experimental version (1.2.4.2). The issue you are describing and is shown on the video is very similar to an issue we had in 1.2.4.0 but which has been since addressed on the experimental updates. Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 22, 2019 Share Posted July 22, 2019 1.2.4.2 Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 23, 2019 Author Aerosoft Share Posted July 23, 2019 1.2.5.0 should be out this week. Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 25, 2019 Share Posted July 25, 2019 Ok. Out of interest do you guys tick or untick the gsx box that estimates pax? Mine is i ticked so it auto placed what i put in the mcdu into gsx but i have to confirm the number first. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Hanse 216 Posted July 31, 2019 Deputy Sheriffs Share Posted July 31, 2019 If the GSX option is unticked then GSX uses the pax numbers which are available on the MCDU (LSK1L). The other mentioned issue with pax numbers and using various busses is still on our ToDoList. As a workaround just untick the GSX option to use more than one bus. Regards, Rolf Link to comment Share on other sites More sharing options...
matty260191 23 Posted July 31, 2019 Share Posted July 31, 2019 GSX is set to yes in my MCDU im talking about in the gsx settings should i allow it to estimate or not currently i dont allow estimating so it reads the mcdu. and gsx set to yes in the options mcdu Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted August 2, 2019 Deputy Sheriffs Share Posted August 2, 2019 Hi matty260191, Do you still have an issue with the weights reseting on 1.2.5.0? If so, do you have "multiple tricks" settings ticked or unticked on GSX options menu? Link to comment Share on other sites More sharing options...
dron960 11 Posted August 2, 2019 Share Posted August 2, 2019 Such problem. Installed version 1.2.5.0. When refueling the tanker pulls up and asks to start refueling. In MCDU I press the FUEL button and nothing happens. The button should start flashing and go refueling. Refueling does not begin and GSX still asks to refuel the plane. The old version didn't have that. Please fix it. Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted August 2, 2019 Deputy Sheriffs Share Posted August 2, 2019 24 minutes ago, dron960 said: Such problem. Installed version 1.2.5.0. When refueling the tanker pulls up and asks to start refueling. In MCDU I press the FUEL button and nothing happens. The button should start flashing and go refueling. Refueling does not begin and GSX still asks to refuel the plane. The old version didn't have that. Please fix it. This is already known and being looked at. The fueling is indeed happening, but delayed by around 5 min after the truck arrived. 25 minutes ago, dron960 said: GSX still asks to refuel the plane. The GSX message is a bit misleading. It doesnt ask you to do anything, but tells you that GSX "use the aircraft fuelsystem". Grammatically not quite correct. Link to comment Share on other sites More sharing options...
dron960 11 Posted August 2, 2019 Share Posted August 2, 2019 21 minutes ago, mopperle said: This is already known and being looked at. The fueling is indeed happening, but delayed by around 5 min after the truck arrived. Thanks. I hope that will fix it Link to comment Share on other sites More sharing options...
matty260191 23 Posted August 3, 2019 Share Posted August 3, 2019 22 hours ago, Secondator said: Hi matty260191, Do you still have an issue with the weights reseting on 1.2.5.0? If so, do you have "multiple tricks" settings ticked or unticked on GSX options menu? not tried recently will try and let you know but yer i think i have estimate pax unticked and mutiple trips ticked Link to comment Share on other sites More sharing options...
Deputy Sheriffs Hanse 216 Posted August 5, 2019 Deputy Sheriffs Share Posted August 5, 2019 On 2.8.2019 at 20:44, mopperle sagte: This is already known and being looked at. The fueling is indeed happening, but delayed by around 5 min after the truck arrived. The GSX message is a bit misleading. It doesnt ask you to do anything, but tells you that GSX "use the aircraft fuelsystem". Grammatically not quite correct. The only workaround I can suggest until the issue is fixed is not to use the GSX-fueling function but the internal MCDU LOAD- / FUEL menu instead e.g. LSK3R or LSK4R. I also already asked the GSX people if that misleading message can be surpressed like the other "action" messages in connection with opening and closing the doors. Regards, Rolf Link to comment Share on other sites More sharing options...
matty260191 23 Posted August 6, 2019 Share Posted August 6, 2019 I don't have a fuelling issue my issue is to do with the gross weight resetting when you use busses to load pax. Loads the wight for the first bus then resets and loads the weight for the second bus. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Hanse 216 Posted August 14, 2019 Deputy Sheriffs Share Posted August 14, 2019 On 6.8.2019 at 13:05, matty260191 sagte: I don't have a fuelling issue my issue is to do with the gross weight resetting when you use busses to load pax. Loads the wight for the first bus then resets and loads the weight for the second bus. The problem you mentioned should also be solved with the next experimental update...... Regards, Rolf Link to comment Share on other sites More sharing options...
matty260191 23 Posted August 14, 2019 Share Posted August 14, 2019 ok thanks. Link to comment Share on other sites More sharing options...
matty260191 23 Posted August 16, 2019 Share Posted August 16, 2019 Ok so today I discovered that you can initiate the whole gsx sequence by setting the mcdu3 the click fuel then the aircraft calls the refuel truck for you. i did not know this so have been setting then opening gsx myself for the truck then it wouldn't work as the fuel button wouldn't work. now i know this i should be fine with how it works so fuelling initiated through the mcdu3 then i can call gsx catering and boarding, Link to comment Share on other sites More sharing options...
matty260191 23 Posted August 16, 2019 Share Posted August 16, 2019 Jetway loading through GSX boarding loads the correct weight but busses will load the weight of the first 90 pax then resets the pax act figure to 0 when it starts to load the next bus. I think this is an issue being fixed correct? I have assistance service auto mode off and multiple trips on in GSX. If i use the aircraft boarding button in the mcdu3 it doesn't call gsx to load pax just uses the aircraft system to do it. Do I need assistance service auto mode on for the aircraft to call gsx boarding to start? or is just not integrated for the aircraft to call catering and boarding? Please login to display this image. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.