Patrice_cesson 4 Posted April 18, 2019 Share Posted April 18, 2019 Hi Aerosoft team, I just updated my A320 Pro with the version 1240. All seems fine except the MCDU NAV/RAD page. I explain below. In this RAD/NAV page we can enter VOR, ILS, ADF identificators. I made a flight from Dublin to Glasgow. I tuned first the IOM VOR. Ok , it displays corretly as attended. Note tha IOM is the only VOR known with this ident. After that, I tuned the VOR of TRN. Sor I enter TRN in the scrachpad and click on one of the VOR fields of the MCDU (Left one). Doing this, the MCDU displays a list of VORs named all TRN (as there are many VORs named like this). I choosed the first one (by clicking the corresponding side key) and what happens, the VOR field of the NAV/RAD page remained blank. The only way to solve this is to enter the frequency of the chosen TRN VOR instead of the ident. Entering the frequency, the VOR field is updated as attended. So there is a bug here, that were not present in version 1230. Same problem for the ILS of Glasgow (IUU) as there are 2 ILS named like this (the one of Glasgow and another one), the ILS field cannot be updated via the ident, but also only by entering the frequency (here 110.10). So, to sum up the problem: as soon as there are multiple objects (VOR, ILS) with the same ident (Here TRN or IUU), we cannot enter the corresponding field in the MCDU (after the choice screen),. We can only set the field by entering the corresponding frequency. Never seen this on version 1230. I just made a short flight from Dublin to Glasgow with the A320 (no flight plan) and noticed no other problem (Climb is Ok, approach is OK). I did not tested neither the A318/A319, nor the A321. Thanks. Patrice. Link to comment Share on other sites More sharing options...
Patrice_cesson 4 Posted April 19, 2019 Author Share Posted April 19, 2019 Hello, No one here to check/answer to, my problem? Patrice Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted April 19, 2019 Deputy Sheriffs Share Posted April 19, 2019 Hello Patrice, We are aware of this issue and working on a fix for it right now. Thanks for the report! Link to comment Share on other sites More sharing options...
Recciosilva 2 Posted May 14, 2019 Share Posted May 14, 2019 On 4/18/2019 at 6:21 PM, Patrice_cesson said: Hi Aerosoft team, I just updated my A320 Pro with the version 1240. All seems fine except the MCDU NAV/RAD page. I explain below. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - Sor I enter TRN in the scrachpad and click on one of the VOR fields of the MCDU (Left one). Doing this, the MCDU displays a list of VORs named all TRN (as there are many VORs named like this). I choosed the first one (by clicking the corresponding side key) and what happens, the VOR field of the NAV/RAD page remained blank. Patrice. Hello, I have the same problem with version 1240 with A320 and A321. I noticed that this only happens when the VOR is part of a multiple frequency list. The MCDU is unable to register it. But if it is a single VOR with single frequency then the MCDU records it and displays it without problem as usual. Would you know if the fix will soon be produced because it is alternatively impossible to use VOR frequency to program the [FIX INFO] page ? Thanks for your help Reccio Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted May 14, 2019 Deputy Sheriffs Share Posted May 14, 2019 As said, we are working on it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.