magna91 7 Posted February 6, 2019 Share Posted February 6, 2019 Good evening, With the last update 1.2.3.0 I thought you had entered the automatic closing after GSX levle 2 had finished loading the baggage. Now you have to go to MCDU3 and do it manually, I do not know is possible, but it would be nice to close the doors alone (at least the cargo) if you could close all the doors automatically would be even better. Also because if I do not close all the doors do not start the automatic checklist. Thanks Link to comment Share on other sites More sharing options...
Deputy Sheriffs Secondator 643 Posted February 6, 2019 Deputy Sheriffs Share Posted February 6, 2019 I believe that when you call GSX pushback it will close all the doors and disconnect external power. Have you tried this yet? Link to comment Share on other sites More sharing options...
magna91 7 Posted February 6, 2019 Author Share Posted February 6, 2019 Yes ok, but to start the pre-pushback check list all the doors must be closed, and then once is written "follow GSX instruction". If I call the pushback this does not make sense. I think there is some "mistake" in the sequence. Link to comment Share on other sites More sharing options...
GaryMcCl 17 Posted February 14, 2019 Share Posted February 14, 2019 I have the same, but opposite, problem. I want the system to let me do all of the things manually. This used to be be fine, but then I upgraded P3D and the Airbus Pro, and all of a sudden I get things going to early. For example: if GSX loads all of the passengers too quick (which it usually does), then the doors will be automatically closed and the stairways taken away - preventing the remaining passengers from boarding. I need to then get the plane in a situaton where i can just open the doors so i finish the boarding (but it doesn't but the stairway back in the right place). If we could just make it so that GSX wasn't closing/opening doors, that would be good. Gaz Link to comment Share on other sites More sharing options...
Meyerflyer 154 Posted February 15, 2019 Share Posted February 15, 2019 I would also welcome a full control of the doors instead of automatic control. Since updating to Airbus professional I always have trouble using the doors like doors that open theirselfs upon closing. Link to comment Share on other sites More sharing options...
GaryMcCl 17 Posted February 15, 2019 Share Posted February 15, 2019 I posted in the Fsdreamteam forum, but the reply was that It's an aerosoft issue. Gaz Link to comment Share on other sites More sharing options...
GaryMcCl 17 Posted February 15, 2019 Share Posted February 15, 2019 Sorry to push this, but basically is there a way to stop any of the doors moving automatically - I need to manually close doors /cargo.. Thanks, Gaz Link to comment Share on other sites More sharing options...
Querer 74 Posted February 19, 2019 Share Posted February 19, 2019 I second this. Already when it was initially planned to include those things I thought: hopefully it will be optional. I know, for many it is nice to have those things automated, not for me, especially not if there are still flaws. My suggestion: put a selection box into the AS configuration that allows using this or not. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted February 19, 2019 Aerosoft Share Posted February 19, 2019 I'll see if we can find some time for that. Link to comment Share on other sites More sharing options...
GaryMcCl 17 Posted February 20, 2019 Share Posted February 20, 2019 Thanks for looking into it, Mathijs... Gaz Link to comment Share on other sites More sharing options...
CaptKornDog 41 Posted February 21, 2019 Share Posted February 21, 2019 Thank you, I too would like to disable the automatic doors. (GSX v1 user myself.) Link to comment Share on other sites More sharing options...
klisura 92 Posted February 22, 2019 Share Posted February 22, 2019 +1 for a selection box into the AS configuration that allows using this or not Link to comment Share on other sites More sharing options...
Deputy Sheriffs Hanse 216 Posted March 2, 2019 Deputy Sheriffs Share Posted March 2, 2019 I never saw a PF or PNF closing or opening doors. This is the responsibility of the cabin crew or groundservices and this was the reason why we enabled /implemented this GSX function. But with the next experimental update some changes will be implemented in connection with GSX: Before starting any GSX action you are able to manually close / open the doors (using like before the MCDU3 function). If you afterwards starts the GSX-function it will recognize that the doors are already in the right position and will start from there. This is also valid for the BEFORE START CL. You can either close the doors manually and then the CL automatically will start. After it has been finished start the GSX Pushback and everything works as previously. The other opportunity is to use the GSX Pushback function. Then the doors will automatically be closed and also the BEFORE START CL will be started. In parallel GSX already prepares the pushback procedure...... but do not follow the GSX command "Disconnect EXT GPU" and manually disconnect it in the MCDU3 but wait as it automatically will be during by the checklist after the APU is available – otherwise the plane will be without power. Regards, Rolf Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.