tonyc 0 Posted January 10, 2019 Share Posted January 10, 2019 I had this on a previous thread but having read the thread again I decided it was inappropriate. Thus I start this new thread. I have got my VA company route to load via the FMS and even added the SID and STAR which shows just fine in the FMS. But I can't get it to show as a map on the MFD. I have toggled the Format/Range knob to make sure it is on MAP but absolutely no route shows. In fairness I am sure it is something I am not doing correctly but I have followed the manuals over and over again. Still nothing there. Any help gratefully received as always. Tony Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted January 10, 2019 Developer Share Posted January 10, 2019 Since this is definitely no general issue, I need the full flightplan before I can help here. Link to comment Share on other sites More sharing options...
tonyc 0 Posted January 10, 2019 Author Share Posted January 10, 2019 Hi Hans No problem. This is it. It loads into the FMC ok but just won't show on the map. I should add that I added the SID and STAR into it after the plan loaded. What you see here is the plan created for our VA when the new Jo'burg base was added at Xmas. In fairness it is the first time we have brought the CRJ900 into service with us and so we were relying on 3rd party software such as PFPX or FS Commander to create the FMC plans. We have no previous experience with the CRJ which we intend to use more widely across our worldwide regional bases which is why we need to get it right. [CoRte] ArptDep=FAOR RwyDep=FAOR03L ArptArr=FALE RwyArr=FALE06 ArptAltn=FAKN SID= SIDEnrTrans= STAR= EnrSTARTrans= STARApprTrans= APPR_Trans=VECTORS RwyArrFINAL=I06 CoRoute= FltNo=N922SB DctWpt1=APDAK DctWpt1Coordinates=-26.550983,29.047956 DctWpt2=AVAVA DctWpt2Coordinates=-26.915644,29.452808 DctWpt3=EVARI DctWpt3Coordinates=-27.680253,30.054219 DctWpt4=APKIK DctWpt4Coordinates=-28.330428,30.575878 DctWpt5=APMAT DctWpt5Coordinates=-28.789939,30.949897 [PerfData] CrzAlt=33000 CrzAltAltn=37000 PaxCnt=89 PaxWeight=175 CargoWeight=4376 FuelWeight=9777 WindDirClb=295 WindSpdClb=22 WindDirCrz=295 WindSpdCrz=27 WindDirDes=275 WindSpdDes=7 ISADev=13 ResFuel=2377 TaxiFuel=500 [VNAVData] TransAlt=8000 TransLvl=18000 Thanks Tony Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted January 10, 2019 Developer Share Posted January 10, 2019 Thanks. I'll give it a try. Link to comment Share on other sites More sharing options...
tonyc 0 Posted January 14, 2019 Author Share Posted January 14, 2019 On 1/10/2019 at 3:33 PM, Hans Hartmann said: Thanks. I'll give it a try. Hi Hans Any luck with trying this yet? Tony Link to comment Share on other sites More sharing options...
tonyc 0 Posted January 14, 2019 Author Share Posted January 14, 2019 3 hours ago, tonyc said: Hi Hans Any luck with trying this yet? Tony Its ok Hans I have sorted the problem . I am sure you are very busy so no problem. Thanks for the discussion. Tony Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted January 14, 2019 Developer Share Posted January 14, 2019 Yep. Unfortunately I have a job What was the problem? Link to comment Share on other sites More sharing options...
tonyc 0 Posted January 15, 2019 Author Share Posted January 15, 2019 It was my fault entirely Hans. I tried to follow the tutorial but must have missed the bit where you have to click "EXECUTE" on the FMC keyboard when you are prompted in the screen. In fairness the instruction on the screen isn't that obvious which is how I missed it. Anyway that's that problem solved. Thank you for the input! I managed a complete flight with just the problem of an autopilot alarm that wouldn't shut up! But I will make separate thread for that. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted January 15, 2019 Developer Share Posted January 15, 2019 OK. Good to know. I was really worried about this one and I'm glad it sorted itself Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.