Flight made with an A319-IAE.    I still have checklist problems at the SBSP airport that is 2631 feet above sea level.   As shown in the jeppesen's chart SBSP is CAT1 then I entered with 2820 in the BARO (MCDU1) before activating the "DESCENT PREP CL: STARTS IN ...".   After the "APPROACH CHECLIST" I confirmed the approach phase in MCDU1.   During the final the PFD shows that SBSP is CAT3 (?). Is this a P3D v4.4 error?   The "LANDING CHECKLIST"