space_coast90 0 Posted December 13, 2018 Share Posted December 13, 2018 Hello, today I updated to version 2.0 of PFPX. I have the following problem: When I save a flightplan for vasfmc, the flightplan is not correctly saved, thus cannot be used in vasfmc. When I want to use it, the departure airport is shown as a waypoint, the arrival airport is not implemented in the destintation field of the vasfmc FCDU. I save it in the Vasfmc 2.1 standalone folder. When I activate the plan thru the MCDU, the departure and destination airports are shown as waypoints. Any help would be appreciated Thanks Jan Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted December 13, 2018 Deputy Sheriffs Share Posted December 13, 2018 Do you have an example of a correctly formatted .fmc file? If so, please attach it here. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted December 13, 2018 Author Share Posted December 13, 2018 EDDLEDDM001.fmc This is the plan which comes with the download ZBAALSZH01.fmc This is the one I created with PFPXV2 Link to comment Share on other sites More sharing options...
space_coast90 0 Posted December 14, 2018 Author Share Posted December 14, 2018 Did you have the chance to look into this problem? Link to comment Share on other sites More sharing options...
space_coast90 0 Posted December 14, 2018 Author Share Posted December 14, 2018 I switched back to the old version with my backup so that it is working properly Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted December 15, 2018 Deputy Sheriffs Share Posted December 15, 2018 Please head over to FlightSimSoft and open a support ticket for this problem. http://www.flightsimsoft.com/support/ Link to comment Share on other sites More sharing options...
space_coast90 0 Posted January 24, 2019 Author Share Posted January 24, 2019 Is there a solution for this problem? I opened a ticket a month ago and still no answer from the ticket and still no answer here in the forum. thx for the support Link to comment Share on other sites More sharing options...
space_coast90 0 Posted January 31, 2019 Author Share Posted January 31, 2019 One week over and still no service whatsoever thx again for your „great“ support Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 2, 2019 Share Posted February 2, 2019 Have loaded VASFMC here and tested both v1.89 and 2.03 of PFPX and could not find issue. Here are the outputs of both versions ( this is similar to other export utilities ) PFPX V1.89 YMHB|-42.8289833069|147.5020446777|13 KANLI|-42.3224487305|147.3988800049|0 LT|-41.5439453125|147.2130432129|0 FLIKI|-40.0000000000|146.3933258057|0 EXROM|-39.4059066772|146.0898284912|0 ONAGI|-38.4712257385|145.6234130859|0 YMML|-37.6857872009|144.8409881592|434 PFPX V2.03 YMHB|-42.8289833069|147.5020446777|13 KANLI|-42.3224487305|147.3988800049|0 LT|-41.5439453125|147.2130432129|0 FLIKI|-40.0000000000|146.3933258057|0 EXROM|-39.4059066772|146.0898284912|0 ONAGI|-38.4712257385|145.6234130859|0 YMML|-37.6622619629|144.8480834961|434 The departure and arrival airports listed correctly and SID/STAR could be selected. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 vor 16 Stunden , srcooke sagte: Have loaded VASFMC here and tested both v1.89 and 2.03 of PFPX and could not find issue. Here are the outputs of both versions ( this is similar to other export utilities ) PFPX V1.89 YMHB|-42.8289833069|147.5020446777|13 KANLI|-42.3224487305|147.3988800049|0 LT|-41.5439453125|147.2130432129|0 FLIKI|-40.0000000000|146.3933258057|0 EXROM|-39.4059066772|146.0898284912|0 ONAGI|-38.4712257385|145.6234130859|0 YMML|-37.6857872009|144.8409881592|434 PFPX V2.03 YMHB|-42.8289833069|147.5020446777|13 KANLI|-42.3224487305|147.3988800049|0 LT|-41.5439453125|147.2130432129|0 FLIKI|-40.0000000000|146.3933258057|0 EXROM|-39.4059066772|146.0898284912|0 ONAGI|-38.4712257385|145.6234130859|0 YMML|-37.6622619629|144.8480834961|434 The departure and arrival airports listed correctly and SID/STAR could be selected. And how do you save the route? For example: ZRHGVA01 or LSZHLSGG01 or different? Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 LSZHLSGG01 entered as CO-RTE Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 vor 11 Minuten, srcooke sagte: LSZHLSGG01 entered as CO-RTE ok, I will try to write in LSZHLSGG01 and save it to vasfmc and look what it tells me Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 By default PFPX will the save the route as ICAOICAOXX where the numerical XX depends upon the number of stored routes. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 vor 2 Stunden , srcooke sagte: By default PFPX will the save the route as ICAOICAOXX where the numerical XX depends upon the number of stored routes. I gave it a try with the resukt, that it's not working. I could only plan one flight, all the others did not work out. When I export the pln and insert it into Vasfmc, the destination airport is the same as the departure airport. When I replan the flight, the departure airport is shown as a waypoint. It's not working correctly Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 Post the exported file here. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 the working file: LFMNLSZH01.fmc the files that do not work: LSZHLFPG01.fmc ZRHCDG01.fmc LSZHLFPGLX652.fmc LSZHLFPG01.fmc ZRHCDG01.fmc Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 Whilst I can see your files error it cannot be reproduced here if I compute and export the same route for LSZH - LFPG. Which exact version of PFPX is in use. What AIRAC provider ? Are you using the same AIRAC cycle in PFPX and VASFMC Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 vor 28 Minuten, srcooke sagte: Whilst I can see your files error it cannot be reproduced here if I compute and export the same route for LSZH - LFPG. Which exact version of PFPX is in use. What AIRAC provider ? Are you using the same AIRAC cycle in PFPX and VASFMC I will check it in a few minutes and get back to you Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 AIRAC-Cycle from Navigraph: NG1902 31-Jan-2019 - 27-Feb-2019 (Current) both on PFPX and Vasfmc PFPX Version: 2.03 Server subscription: 26-Oct-2019 Vasfmc Version 2.1 FMS 4.12Z AIRAC 1902 31JAN28FEB/19 Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 Exactly the same here yet LSZH-LFPG works: Please login to display this image. every random route from my schedule I have tested works. Not sure what else to suggest. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 Do I need to activate or deactivate something in my planning? But thanks for your help, at least you had the time for helping me out, what can't be said by Aerosoft. I once again went back to version 1.28 where everything works perfectly. I must admit that there needs to be help from the developers since I opened a ticket a long time ago and still there is not a single answer. I seriously considering changing to simbrief for my planning program. Link to comment Share on other sites More sharing options...
srcooke 421 Posted February 3, 2019 Share Posted February 3, 2019 The only thing I can see is that the runway coordinates in the flightplan route do not match the airports.txt in VASFMC, if I replace those coords from my f/p it works. I suggest backing up and deleting all content of \vasfmc-2.1\navdata Reinstall the AIRAC and try again. Link to comment Share on other sites More sharing options...
space_coast90 0 Posted February 3, 2019 Author Share Posted February 3, 2019 vor 57 Minuten, srcooke sagte: The only thing I can see is that the runway coordinates in the flightplan route do not match the airports.txt in VASFMC, if I replace those coords from my f/p it works. I suggest backing up and deleting all content of \vasfmc-2.1\navdata Reinstall the AIRAC and try again. did a full reinstallation of the airac still no luck thx for your help, I'm over and out Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.