Recently we have seen a lot of codes used to unlock our products being offered for discounted prices. Almost all of them are bought using stolen credit cards. These codes will all be blocked by our systems and you will have to try to get your money back from the seller, we are unable to assist in these matters. Do be very careful when you see a deal that is almost too good to be true, it probably is too good to be true.

Jump to content
space_coast90

Flightplan compile to Vasfmc 2.1 Standalone does not work

Recommended Posts

Hello,

today I updated to version 2.0 of PFPX. I have the following problem:

When I save a flightplan for vasfmc, the flightplan is not correctly saved, thus cannot be used in vasfmc.

When I want to use it, the departure airport is shown as a waypoint, the arrival airport is not implemented in the destintation field of the vasfmc FCDU.

I save it in the Vasfmc 2.1 standalone folder. When I activate the plan thru the MCDU, the departure and destination airports are shown as waypoints.

Any help would be appreciated

Thanks

Jan

 

Share this post


Link to post

Do you have an example of a correctly formatted .fmc file? If so, please attach it here.

 

Share this post


Link to post

Is there a solution for this problem? I opened a ticket a month ago and still no answer from the ticket and still no answer here in the forum.

thx for the support

Share this post


Link to post

Have loaded VASFMC here and tested both v1.89 and 2.03 of PFPX and could not find issue.

 

Here are the outputs of both versions ( this is similar to other export utilities )

 

PFPX V1.89

YMHB|-42.8289833069|147.5020446777|13
KANLI|-42.3224487305|147.3988800049|0
LT|-41.5439453125|147.2130432129|0
FLIKI|-40.0000000000|146.3933258057|0
EXROM|-39.4059066772|146.0898284912|0
ONAGI|-38.4712257385|145.6234130859|0
YMML|-37.6857872009|144.8409881592|434


PFPX V2.03

YMHB|-42.8289833069|147.5020446777|13
KANLI|-42.3224487305|147.3988800049|0
LT|-41.5439453125|147.2130432129|0
FLIKI|-40.0000000000|146.3933258057|0
EXROM|-39.4059066772|146.0898284912|0
ONAGI|-38.4712257385|145.6234130859|0
YMML|-37.6622619629|144.8480834961|434

 

The departure and arrival airports listed correctly and SID/STAR could be selected.

Share this post


Link to post
vor 16 Stunden , srcooke sagte:

Have loaded VASFMC here and tested both v1.89 and 2.03 of PFPX and could not find issue.

 

Here are the outputs of both versions ( this is similar to other export utilities )

 

PFPX V1.89

YMHB|-42.8289833069|147.5020446777|13
KANLI|-42.3224487305|147.3988800049|0
LT|-41.5439453125|147.2130432129|0
FLIKI|-40.0000000000|146.3933258057|0
EXROM|-39.4059066772|146.0898284912|0
ONAGI|-38.4712257385|145.6234130859|0
YMML|-37.6857872009|144.8409881592|434


PFPX V2.03

YMHB|-42.8289833069|147.5020446777|13
KANLI|-42.3224487305|147.3988800049|0
LT|-41.5439453125|147.2130432129|0
FLIKI|-40.0000000000|146.3933258057|0
EXROM|-39.4059066772|146.0898284912|0
ONAGI|-38.4712257385|145.6234130859|0
YMML|-37.6622619629|144.8480834961|434

 

The departure and arrival airports listed correctly and SID/STAR could be selected.

And how do you save the route? For example: ZRHGVA01 or LSZHLSGG01 or different?

 

Share this post


Link to post
vor 11 Minuten, srcooke sagte:

LSZHLSGG01 entered as CO-RTE

ok, I will try to write in LSZHLSGG01 and save it to vasfmc and look what it tells me

Share this post


Link to post

By default PFPX will the save the route as ICAOICAOXX where the numerical XX depends upon the number of stored routes.

Share this post


Link to post
vor 2 Stunden , srcooke sagte:

By default PFPX will the save the route as ICAOICAOXX where the numerical XX depends upon the number of stored routes.

I gave it a try with the resukt, that it's not working. I could only plan one flight, all the others did not work out. When I export the pln and insert it into Vasfmc, the destination airport is the same as the departure airport. When I replan the flight, the departure airport is shown as a waypoint. It's not working correctly

Share this post


Link to post

Whilst I can see your files error it cannot be reproduced here if I compute and export the same route for LSZH - LFPG.

 

Which exact version of PFPX is in use.

 

What AIRAC provider ?

 

Are you using the same AIRAC cycle in PFPX and VASFMC

 

 

 

 

Share this post


Link to post
vor 28 Minuten, srcooke sagte:

Whilst I can see your files error it cannot be reproduced here if I compute and export the same route for LSZH - LFPG.

 

Which exact version of PFPX is in use.

 

What AIRAC provider ?

 

Are you using the same AIRAC cycle in PFPX and VASFMC

 

 

 

 

I will check it in a few minutes and get back to you

Share this post


Link to post

AIRAC-Cycle from Navigraph:

NG1902

31-Jan-2019 - 27-Feb-2019 (Current)

both on PFPX and Vasfmc

PFPX Version: 2.03

Server subscription: 26-Oct-2019

 

Vasfmc Version

2.1 FMS 4.12Z

AIRAC 1902 31JAN28FEB/19

 

 

Share this post


Link to post

Exactly the same here yet LSZH-LFPG works:

 

capture_001_03022019_154919.jpg.95281063846c7ed6684348321535365e.jpg

 

every random route from my schedule I have tested works.

 

Not sure what else to suggest.

Share this post


Link to post

Do I need to activate or deactivate something in my planning?

 

But thanks for your help, at least you had the time for helping me out, what can't be said by Aerosoft. I once again went back to version 1.28 where everything works perfectly.
I must admit that there needs to be help from the developers since I opened a ticket a long time ago and still there is not a single answer. I seriously considering changing to simbrief for my planning program.

Share this post


Link to post

The only thing I can see is that the runway coordinates in the flightplan route do not match the airports.txt in VASFMC, if I replace those coords from my f/p it works.

 

I suggest backing up and deleting all content of \vasfmc-2.1\navdata

 

Reinstall the AIRAC and try again.

Share this post


Link to post
vor 57 Minuten, srcooke sagte:

The only thing I can see is that the runway coordinates in the flightplan route do not match the airports.txt in VASFMC, if I replace those coords from my f/p it works.

 

I suggest backing up and deleting all content of \vasfmc-2.1\navdata

 

Reinstall the AIRAC and try again.

did a full reinstallation of the airac still no luck

thx for your help, I'm over and out

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...