FlightSimSoft.com 283 Posted December 8, 2018 Share Posted December 8, 2018 Hello, thank you all for your reports! with the following hotfix the reported issues from the forum should be fixed. Note: this is not a full installer - but a replacement of the original PFPX.exe file. Please unzip the file and place it into the following directory: c:\aerosoft\Professional Flight Planner X\ Best regards, Judith PFPX Hotifx 2.01.zip Installation.txt Link to comment Share on other sites More sharing options...
christinney 0 Posted December 8, 2018 Share Posted December 8, 2018 Hiya Judith, What does this fix? Looks like you missed it out on the above post Cheers Chris Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 8, 2018 Share Posted December 8, 2018 hello Judith, could you list the changes on that version if possible? oups posted at the same time. Link to comment Share on other sites More sharing options...
virtualstuff 76 Posted December 8, 2018 Share Posted December 8, 2018 1 hour ago, FlightSimSoft.com said: Hello, thank you all for your reports! with the following hotfix the reported issues from the forum should be fixed. Note: this is not a full installer - but a replacement of the original PFPX.exe file. Please unzip the file and place it into the following directory: c:\aerosoft\Professional Flight Planner X\ Best regards, Judith PFPX Hotifx 2.01.zip Installation.txt Thanks for the update appreciated, but unfortunately the bug with outdated routes still exits.. . Link to comment Share on other sites More sharing options...
Amit240 0 Posted December 8, 2018 Share Posted December 8, 2018 now (when using V2.01) there is wind info at the vertical profile when using active sky, but the wind charts do not have any wind data info on them when using active sky please try to fix it THIS IS THE VERTICAL PROFILE CHART: Please login to display this image. THIS IS THE WIND DATA CHART WITH NO WIND DATA WHEN USING ACTIVE SKY Please login to display this image. Link to comment Share on other sites More sharing options...
alpha117 51 Posted December 8, 2018 Share Posted December 8, 2018 Hi All, The Maddog route export, still misses the last 2 waypoints from the PFPX route. Looks like the issue is with 'Directs' Exported route(MDR) KSFO KBOS/KPVD DIRECT TIPRE 38.205833 -121.035835 Q126 EKR 40.067444 -107.924950 J100 OBH 41.375736 -98.353592 J10 IOW 41.518963 -91.613251 J146 GIJ 41.768612 -86.318451 J554 JHW 42.188606 -79.121307 PFPX generated route Please login to display this image. Link to comment Share on other sites More sharing options...
wanthuyr 8 Posted December 9, 2018 Share Posted December 9, 2018 2 hours ago, Amit240 said: now (when using V2.01) there is wind info at the vertical profile when using active sky, but the wind charts do not have any wind data info on them when using active sky please try to fix it THIS IS THE VERTICAL PROFILE CHART: Please login to display this image. THIS IS THE WIND DATA CHART WITH NO WIND DATA WHEN USING ACTIVE SKY Please login to display this image. How do you get terrain elevation information? It appears disabled in mine, and it reports elevation data not available. Thanks! Link to comment Share on other sites More sharing options...
Bluemarlin1 11 Posted December 9, 2018 Share Posted December 9, 2018 Replaced the .exe as per install notes and it still says V2.00? Also trying to make a plan it simply won't go through the steps....quite frankly this "product" is not even close to being ready. A total balls up and you guys just lost me for good. Will be recommending people stay a mile away from this junk programme. Link to comment Share on other sites More sharing options...
phil747fan 52 Posted December 9, 2018 Share Posted December 9, 2018 my version when i changed the exe is now 2.01. what other issue do you have that makes you unhappy? one thing is to vent the other is to explain the problems that maybe some will have a tip to make it works for you. Link to comment Share on other sites More sharing options...
leekyuhyoun 0 Posted December 9, 2018 Share Posted December 9, 2018 Hi!I have seen vatsim traffic in the previous version, but I do not see it now. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Michael Pitaev 2 Posted December 9, 2018 Share Posted December 9, 2018 Installed the hotfix however it did not get rid of a problem that I had with PFPX asking/offering to "Find Destination Alternate Routes". It gave me DCT routes to the alternates, which is totally fine, but then the bar does not change to the next step, for example "Release Flight". I know I can press compute flight on the top left but still would like this to be fixed, as keeping to press "Find Destination Alternate Routes" has no effect at all Please login to display this image. Link to comment Share on other sites More sharing options...
VHOJT 57 Posted December 9, 2018 Share Posted December 9, 2018 2 hours ago, Bluemarlin1 said: Replaced the .exe as per install notes and it still says V2.00? Also trying to make a plan it simply won't go through the steps....quite frankly this "product" is not even close to being ready. A total balls up and you guys just lost me for good. Will be recommending people stay a mile away from this junk programme. That's very harsh. I have to disagree: a few teething problems don't make something a junk program. Hopefully people will be able to make up their own minds. I managed to plan flights fine with it. Maybe if you could detail what the exact problem is... You could always go back to a v1 version in the meantime? Link to comment Share on other sites More sharing options...
frederic29 5 Posted December 9, 2018 Share Posted December 9, 2018 hello, since i installed this hotfix, i have OOM when i looking for a route specially when i use high airspace Link to comment Share on other sites More sharing options...
drayton_k 5 Posted December 9, 2018 Share Posted December 9, 2018 3 hours ago, Bluemarlin1 said: Replaced the .exe as per install notes and it still says V2.00? Also trying to make a plan it simply won't go through the steps....quite frankly this "product" is not even close to being ready. A total balls up and you guys just lost me for good. Will be recommending people stay a mile away from this junk programme. I totally agree. You have managed to completely screw up a perfectly good program. I am now unable to SAVE to Aivlasoft EFB as I used to be able to. Link to comment Share on other sites More sharing options...
alpha117 51 Posted December 9, 2018 Share Posted December 9, 2018 EFB export OK here Please login to display this image. Link to comment Share on other sites More sharing options...
krazyk 1 Posted December 9, 2018 Share Posted December 9, 2018 3 hours ago, leekyuhyoun said: Hi!I have seen vatsim traffic in the previous version, but I do not see it now. Please login to display this image. 1 In this picture, you have an option on the top right called 'Layout'. Click on that and then select 'Reset Windows'. The map should appear now. Link to comment Share on other sites More sharing options...
krazyk 1 Posted December 9, 2018 Share Posted December 9, 2018 3 hours ago, Michael Pitaev said: Installed the hotfix however it did not get rid of a problem that I had with PFPX asking/offering to "Find Destination Alternate Routes". It gave me DCT routes to the alternates, which is totally fine, but then the bar does not change to the next step, for example "Release Flight". I know I can press compute flight on the top left but still would like this to be fixed, as keeping to press "Find Destination Alternate Routes" has no effect at all Please login to display this image. Likely because the alternates chosen by PFPX aren't being fed a route correctly. I replicated your flight plan in PFPX, changed all the alternates to larger fields and it went through just fine. Link to comment Share on other sites More sharing options...
alpha117 51 Posted December 9, 2018 Share Posted December 9, 2018 3 hours ago, Michael Pitaev said: Installed the hotfix however it did not get rid of a problem that I had with PFPX asking/offering to "Find Destination Alternate Routes". It gave me DCT routes to the alternates, which is totally fine, but then the bar does not change to the next step, for example "Release Flight". I know I can press compute flight on the top left but still would like this to be fixed, as keeping to press "Find Destination Alternate Routes" has no effect at all Please login to display this image. Looks like the issue is when ANY alternate route is 'Direct', then you will be 'stuck'. Like I a m here, right now Please login to display this image. The way around this, until Christian gets around to fixing/changing this is to delete the DCT Alternates like so: Please login to display this image. Now you can complete the planning process. It's not perfect BUT is is a current work around Link to comment Share on other sites More sharing options...
alpha117 51 Posted December 9, 2018 Share Posted December 9, 2018 6 hours ago, wanthuyr said: How do you get terrain elevation information? It appears disabled in mine, and it reports elevation data not available. Thanks! No issues here when using AS as the current weather engine Please login to display this image. Please login to display this image. 1. Can you confirm that you have the 'TERRAIN' DB file in your Public Documents PFPX DATA folder 2. Can you confirm that you have setup PFPX to point to the correct Active Sky file, and if so does the AS file have the 'current data' in it? 3. Confirm that you did Run Active sky before you started PFPX? Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted December 9, 2018 Deputy Sheriffs Share Posted December 9, 2018 Gentlemen, can you PLEASE open separate topics for your problems? If there is already a topic for your problem, just follow up in there with a hint that the problem still persists for you with hotfix 2.01. This will make sure that nothing is getting missed in between. Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.