Bernd E. 103 Posted October 21, 2018 Share Posted October 21, 2018 Hi all, I have no idea why this happend in this flight, probably I missed something. On the last 10 flights, no problem. If I set to managed speed, it goes down to 134. Approach Phase is not activated. Please login to display this image. Please login to display this image. Flying the A321 CFM Sharklet Version (latest Version). Routing: EDDF SOBRA Y180 NISIV UY180 DIK UN857 GIMER UT300 PON UN872 ERIGA UN741 LOTEE DCT AGADO DCT VERAM Q205 PECKY UQ146 EPAKA LPMA Link to comment Share on other sites More sharing options...
drayton_k 5 Posted October 22, 2018 Share Posted October 22, 2018 I have just had the same problem in cruise. Managed speed drops, I have had to turn off the Autothrottle. Something not quite right with the latest update it seems V1.2.1.3.A320 model All other flights have been without problems. Keith Link to comment Share on other sites More sharing options...
Bernd E. 103 Posted October 22, 2018 Author Share Posted October 22, 2018 I continued without restarting the sim the next flight, LPMA-LOWW, no problem on this flight. No idea why this happend Link to comment Share on other sites More sharing options...
VPA561 6 Posted October 24, 2018 Share Posted October 24, 2018 Also had this problem with latest A321 while in cruise i managed to complete flight in manual speed mode just thought it was me Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted October 24, 2018 Aerosoft Share Posted October 24, 2018 We are trying to recreate this. Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted October 26, 2018 Share Posted October 26, 2018 I managed to get into the situation depicted in the first screenshot yesterday while flying EFHK/LOWI. I was messing with the arrivals while on cruise when suddenly the managed speed went to approach speed. I loaded up second flight plan and everything was well again. Link to comment Share on other sites More sharing options...
Fragged^2 40 Posted October 29, 2018 Share Posted October 29, 2018 I've had this twice now on a flight from ESSA to ENTC. First on climb out of 01L, target speed went from correct 250 to V2 on it's own. Second issue on cruise with a change to the arrival, suddenly target speed went to V2 or there about again. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
haroldeh 7 Posted October 29, 2018 Share Posted October 29, 2018 Similar to the problem I reported - Managed Climb Speed Grossly Inaccurate in 2 Step Climb Harold Link to comment Share on other sites More sharing options...
lacsa01 19 Posted November 4, 2018 Share Posted November 4, 2018 I also have the same Problems. I´ve had to stop the managed control and put the Hand on normal Autopilot Speed - managed route heading is working - and the Altitude by selecting manuell the climb and descent rate. This happened now for two flights... Greets Bob Link to comment Share on other sites More sharing options...
Sabretooth78 56 Posted November 7, 2018 Share Posted November 7, 2018 This sounds like possibly the same issue I reported here: Ultimately, I wasn't able to successfully use managed speed until final approach. Even at around 10,000 feet, it was still targeting low; about 230 kts even though there was no speed restriction in the FMC. Curiously, in an attempt to solve an unrelated issue, I reloaded an autosave that had been saved during cruise, at a point well after the problems began and just for curiousity's sake I pushed into managed mode and voila - it was working properly (!); targeting either M0.78 or 0.79 (I forget which, exactly). I'll be attempting the return leg to KFLL probably tomorrow, so I'm curious to see if it happens again - or if I should just be boring and put it in manual mode after TOD! I can't discount that the issue is related to the 1.2.1.3 update as I don't believe I had flown an entire flight of the A321 IAE since its initial release (which worked just fine, vertical profile issues notwithstanding, on a similar duration flight of 3+ hours). Link to comment Share on other sites More sharing options...
chum 0 Posted November 10, 2018 Share Posted November 10, 2018 On 24.10.2018 at 16:24, Mathijs Kok sagte: We are trying to recreate this. Any news? Same Problems here. Matthias Link to comment Share on other sites More sharing options...
Chris1983 3 Posted November 10, 2018 Share Posted November 10, 2018 Hi, i have suddenly the same Problem. Speed wants to reduce to 112. Best Christian Link to comment Share on other sites More sharing options...
Crabby 28 Posted November 12, 2018 Share Posted November 12, 2018 Just updated and same issue on first flight... Mark Link to comment Share on other sites More sharing options...
Sabretooth78 56 Posted November 13, 2018 Share Posted November 13, 2018 On 11/10/2018 at 6:53 AM, chum said: Any news? Same Problems here. Matthias Per response on my thread it is a known issue and being looked at... For now the work-around is to use managed speed mode or "rebuild" the flight plan using SEC F-PLAN. Link to comment Share on other sites More sharing options...
Irishcurse 19 Posted November 17, 2018 Share Posted November 17, 2018 This is still a problem for me in the latest update Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted November 19, 2018 Aerosoft Share Posted November 19, 2018 We are still unable to recreate this following all correct procedures. Do make 100% sure the MCDU is fully filled because something missing there could cause this. Link to comment Share on other sites More sharing options...
Irishcurse 19 Posted November 19, 2018 Share Posted November 19, 2018 8 hours ago, Mathijs Kok said: We are still unable to recreate this following all correct procedures. Do make 100% sure the MCDU is fully filled because something missing there could cause this. That would mean that when I install the latest full download it works but the last 2 updates I suddenly don't use the MCDU correctly. I will be again uninstall it and reinstall the last download before the updates until someone can fix it. Link to comment Share on other sites More sharing options...
qfuso 0 Posted November 21, 2018 Share Posted November 21, 2018 The same happened to me yesterday night...the only strange thing I noticed was that i forgot to set the "engine start selector" to the middle position. I was flying with the selector on Start position. I don't know if this could be the cause of my problem. Link to comment Share on other sites More sharing options...
Bernd E. 103 Posted November 21, 2018 Author Share Posted November 21, 2018 Hi all, short update from my side: I did not have this issue on the last 20 flights. No Idea which behaviour does affect this strange "issue". vor 42 Minuten, qfuso sagte: The same happened to me yesterday night...the only strange thing I noticed was that i forgot to set the "engine start selector" to the middle position. I was flying with the selector on Start position. I don't know if this could be the cause of my problem. Cant belive that this can cause this but I will do a test flight today if this is affecting the speed Best Regards Bernd Link to comment Share on other sites More sharing options...
qfuso 0 Posted November 21, 2018 Share Posted November 21, 2018 Hi Flyingpilot1740, I was flying from EDDF TO LIRF AT FL380; This is how i prepar my flight (for a complete test): 1) i have a pre-saved flight on EDDF airport as the default airbus product (engine running ready for take off) 2) once loaded from Prepard 3d I change time of flight and then I select Cold and Dark state panel. 3) I wait 2 minutes waiting everithing is off till engine sounds go off then I power up the airbus. Maybe not but I think that testing from saved flights is different from direct loading aircraft. If you check you will also notice that during the flight control check the ailernos will not deploy fully thank you very much Stefano Link to comment Share on other sites More sharing options...
jn_carter 6 Posted November 24, 2018 Share Posted November 24, 2018 I'm having the same issues. Managed speed is completely messed up. In Climb Phase the Init Page says Managed 331/.78 however FMGS commands 201 until Alpha Floor, in Cruise Phase the Speed is even set to 113, Decent Phase 201 again. Correct weights have been entered, wind has been uploaded. Flight: LIMC EDDF, FL320, CI 48, pax 138, cargo 6.0, fuel 6.4, ZFW 57.3, ZFWGC 26.0 Addons: AS for P3D4, Aerosoft A319 latest update (no experimental updates), Aerosoft LIMC and EDDF, Ultimate Traffic Live, Time Zone Fixer, GSX v1 Btw, this was just the recent flight, I've been having the same issues for a while. Thanks for figuring out what went wrong! Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Irishcurse 19 Posted November 24, 2018 Share Posted November 24, 2018 I uninstalled and reinstalled without the updates. Solves that problem. Link to comment Share on other sites More sharing options...
jn_carter 6 Posted November 24, 2018 Share Posted November 24, 2018 @Irishcurse Well that much was obvious! The bug didn't occure from the beginning, so clearly one of the updates must have caused the fault. Reinstalling without updates can't be the solution since the updates solved other bugs and/or brought more features to the bus. Link to comment Share on other sites More sharing options...
Irishcurse 19 Posted November 24, 2018 Share Posted November 24, 2018 I cant stand using it with the speed issue. It affects the decents and such. I would rather roll it back than update and have it not work. Any other bugs are minor by comparison. Link to comment Share on other sites More sharing options...
jn_carter 6 Posted November 25, 2018 Share Posted November 25, 2018 I found a solution for my described problem: The Load and Fuel Page of the AS A319/320 calculates the wrong ZFWGC and Trim, the Fuel Planner comes up with different numbers. I used them instead and didn't have those issues described earlier. I noticed before that the Load and Fuel Page always showed ZFWGC 26.0 and Trim 0.8, I guess there's the bug. Just use the figures from the Fuel Planner and it should work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.