Jarvis 0 Posted July 13, 2018 Share Posted July 13, 2018 Hi, I have followed the guide to set up the tiller in the manual but when I press the pedal disc and try to turn with the throttle 3 axis, nothing happens, Thank you in advance Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted July 13, 2018 Share Posted July 13, 2018 Do you have EXDOC installed? If so, you'll need to update to Chaseplane (just kidding, sort of), you'll need to update to their new Beta and that should resolve it. If not... then I've asked a friend who uses the tiller function to swing by to help (I don't use the tiller function). Link to comment Share on other sites More sharing options...
G Sproson 23 Posted July 13, 2018 Share Posted July 13, 2018 To use the Tiller function, you'll want to use FSuipc, within there there is an option under "send as FSuipx Axis" for 'steering tiller', or you can go under send as FS Axis and look for 'steering' in the dropdown Link to comment Share on other sites More sharing options...
Jarvis 0 Posted July 14, 2018 Author Share Posted July 14, 2018 Ok, thanks for your help Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 14, 2018 Aerosoft Share Posted July 14, 2018 6 hours ago, G Sproson said: To use the Tiller function, you'll want to use FSuipc, within there there is an option under "send as FSuipx Axis" for 'steering tiller', or you can go under send as FS Axis and look for 'steering' in the dropdown FSUIPC is absolutely NOT needed for this. Link to comment Share on other sites More sharing options...
Adamski_NZ 19 Posted July 16, 2018 Share Posted July 16, 2018 On 7/14/2018 at 6:28 PM, Mathijs Kok said: FSUIPC is absolutely NOT needed for this. Thanks, Mathijs. I've always used FSUIPC for the tiller for all the previous AS Airbuses (and also the MJC Dash). How do I do it without FSUIPC? Just map an axis in the P3D controls setup to "Steering Set"? I've been using the twist rudder axis on my X-52 Pro. Maybe that's why I'm having tiller animation problems. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 16, 2018 Aerosoft Share Posted July 16, 2018 Read the Vol 1 manual, it is explained there. Link to comment Share on other sites More sharing options...
Adamski_NZ 19 Posted July 16, 2018 Share Posted July 16, 2018 Thanks again, Mathijs, for the rapid response! I'll RTFM and so some more testing tomorrow ;-) Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 16, 2018 Share Posted July 16, 2018 On 7/13/2018 at 11:48 PM, Jarvis said: Hi, I have followed the guide to set up the tiller in the manual but when I press the pedal disc and try to turn with the throttle 3 axis, nothing happens, Thank you in advance Why do you press PEDAL DISC here? This button will only disconnect the pedals from your steering for the flight control check. Link to comment Share on other sites More sharing options...
Jarvis 0 Posted July 16, 2018 Author Share Posted July 16, 2018 5 hours ago, Adamski_NZ said: How do I do it without FSUIPC? You also need to enable the tiller option in the third fmc, this is not mentioned in the manual but I figured it out. 4 hours ago, Emanuel Hagen said: Why do you press PEDAL DISC here? That is what I use it for, in the control check, but I also keep it pressed during taxi. Link to comment Share on other sites More sharing options...
Adamski_NZ 19 Posted July 17, 2018 Share Posted July 17, 2018 All working correctly now on my system: thanks for the help! Link to comment Share on other sites More sharing options...
Deputy Sheriffs mopperle 4162 Posted July 17, 2018 Deputy Sheriffs Share Posted July 17, 2018 Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.