xtasy 1 Posted July 12, 2018 Share Posted July 12, 2018 Where i am? What to do? http://pix.my/e/sGgB4e omg... http://pix.my/e/YmP6uF APU off... http://pix.my/e/F3677N Engines alave!!! )) http://pix.my/e/CkpH5n Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted July 12, 2018 Share Posted July 12, 2018 Sorry, but I'm not sure if you're attempting to be funny, or if you're actually having issues. I'll give you time to post a description of what you're experiencing. If you have problems with a route, departure or arrival then please provide the complete route so we can look at it. Note that route depictions are not even perfect real world and sometimes require pilot input to correct. Looking forward to hearing back from you. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted July 12, 2018 Deputy Sheriffs Share Posted July 12, 2018 And please attach your screenshots directly to your post here instead of using some external servers. Many users, me inclusive, do not feel too comfortable to allow untrusted websites any sort of scripting. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 25 minutes ago, DaveCT2003 said: I will try to describe everything, I apologize for bad English. The first flight was made from URRR, which is not in AIRAC. It was a test flight. Takeoff in a straight line and climb. Then I used "DIR TO" and entered the point. Point appeared in FPL, but the plane continued to fly straight. I repeated the action, the second same point was added, but the plane continued to fly straight.Then I added the point first to the FPL. The page "DIR TO" has the opportunity to choose it. I chose and I saw this. Please login to display this image. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Did you enter all the necessary FMGS information? We had a few customers now who came back from Boeings and forgot to fill out the INIT B page and thus run into such routing issues. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 5 minutes ago, Emanuel Hagen said: Did you enter all the necessary FMGS information? We had a few customers now who came back from Boeings and forgot to fill out the INIT B page and thus run into such routing issues. Yes. INIT A + FPL + INIT B + PERFOMANCE but if the airport is not in airac, then V1 Vr V2 is not filled automatically, when entering the configuration, I filled them manually. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Alright, it might be related to the fact you took off from an Airport which was not in the AIRAC then. Can you reproduce these issues if you take off from an airport which is contained in the database? Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 7 minutes ago, Emanuel Hagen said: Alright, it might be related to the fact you took off from an Airport which was not in the AIRAC then. Can you reproduce these issues if you take off from an airport which is contained in the database? Ok. In the second flight there was a failure of the engines, as can be seen in the second screenshot. The temperature suddenly dropped to -440 degrees from the first engine. At EKAM, all the engines turned off, but they worked. And the whole flight worked ... Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Just now, xtasy said: Ok. In the second flight there was a failure of the engines, as can be seen in the second screenshot. The temperature suddenly dropped to -440 degrees from the first engine. At EKAM, all the engines turned off, but they worked. And the whole flight worked ... Since we do not model emergencies there has to be something else which interferes with your system. Maybe the most stupid and obvious question, but are you sure you did not run out of fuel? This happened to another customer some days back, who insisted his engines would keep failing. It turned out he never refueled the aircraft prior to his flights. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 And there is one more bug that I will check. If, after starting the engines, turn off the APU by pressing the APU MASTER SWITCH button, the APU continues to operate. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Just now, xtasy said: And there is one more bug that I will check. If, after starting the engines, turn off the APU by pressing the APU MASTER SWITCH button, the APU continues to operate. This certainly works fine on all our test system. Note that there is a 60 seconds cooldown period before the APU shuts down which is not a bug, but a feature. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 1 minute ago, Emanuel Hagen said: Since we do not model emergencies there has to be something else which interferes with your system. Maybe the most stupid and obvious question, but are you sure you did not run out of fuel? This happened to another customer some days back, who insisted his engines would keep failing. It turned out he never refueled the aircraft prior to his flights. No) Please login to display this image. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Just now, xtasy said: No) Please login to display this image. Do you maybe have a mixture axis assigned in P3D which might cut off the fuel supply? Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 Just now, Emanuel Hagen said: Do you maybe have a mixture axis assigned in P3D which might cut off the fuel supply? No. Just set up the axis of the tiller. Engine 3 throttle axis. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Okay, this should not be the cause of the issue then. Could you create a list of all other addons you use? Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 1 minute ago, Emanuel Hagen said: Okay, this should not be the cause of the issue then. Could you create a list of all other addons you use? Active Sky for Prepar3D v4 + ASP4 Update 062818 v6753* and Please login to display this image. Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 12, 2018 Deputy Sheriffs Share Posted July 12, 2018 One question from my side. Did you switch between FSL and our bus without restarting the sim? Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 Just now, masterhawk said: One question from my side. Did you change between FSL and our bus without restarting the sim? No. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 This bug from the old version migrated to the new one? Please login to display this image. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 Which bug do you mean? Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 12, 2018 Deputy Sheriffs Share Posted July 12, 2018 3 minutes ago, xtasy said: This bug from the old version migrated to the new one? Please login to display this image. We do not simulate non normal ops. And what you see is gravity feed, what would also be non normal ops. This Bus will not behave correct in non normal ops, just because it is not part of the code. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 1 minute ago, masterhawk said: We do not simulate non normal ops. And what you see is gravity feed, what would also be non normal ops. This Bus will not behave correct in non normal ops, just because it is not part of the code. All pumps are off, and the engines start and work. I did not turn it on before starting. Link to comment Share on other sites More sharing options...
Emi 5161 Posted July 12, 2018 Share Posted July 12, 2018 1 minute ago, xtasy said: All pumps are off, and the engines start and work. I did not turn it on before starting. Which is totally normal, the fuel pump swtiches only control the AC driven fuel pumps, not the engine driven fuel pumps which still supply fuel. The "old" bug which some people talked about with the fuel pumps was the fact that no fuel was being used with the AC pumps being off. And this one is fixed now. Link to comment Share on other sites More sharing options...
xtasy 1 Posted July 12, 2018 Author Share Posted July 12, 2018 1 minute ago, Emanuel Hagen said: Which is totally normal, the fuel pump swtiches only control the AC driven fuel pumps, not the engine driven fuel pumps which still supply fuel. The "old" bug which some people talked about with the fuel pumps was the fact that no fuel was being used with the AC pumps being off. And this one is fixed now. Good )) Link to comment Share on other sites More sharing options...
Deputy Sheriffs masterhawk 799 Posted July 12, 2018 Deputy Sheriffs Share Posted July 12, 2018 Regarding your other problems. Please try a reinstall. uninstall clean folders reboot install reboot Then please try the tutorial and report back. Doing a lot non normal things and “playing” with the systems might mess up the logic. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.