GEK_the_Reaper 233 Posted May 29, 2018 Share Posted May 29, 2018 vor 20 Stunden , Hans Hartmann sagte: SP1 beta has been sent to the testers today. If you wish to test as well (especially if you have troubles with specific issues), please send me a message via the forum and I'll give you access. Hello Hans, I have a pretty solid and stable setup. Would be happy to assist you with the SP1beta. I'm following some issues I consider to be critical e.g. some ILS approaches, SID/STAR changes, and so on. Regards, Gerald Link to comment Share on other sites More sharing options...
ThatGuyDan96 4 Posted May 31, 2018 Share Posted May 31, 2018 On 5/28/2018 at 12:51 PM, Hans Hartmann said: SP1 beta has been sent to the testers today. If you wish to test as well (especially if you have troubles with specific issues), please send me a message via the forum and I'll give you access. Hello Hans! I would love to assist with the beta testing! Looking forward to what you have in the update, I have over 150 hours with 60 flights in the CRJ and am in love with the aircraft. Please let me know what I can do to assist you with your development of this beautiful aircraft! Cheers! Link to comment Share on other sites More sharing options...
togismo 3 Posted June 10, 2018 Share Posted June 10, 2018 any news ?? Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted June 10, 2018 Author Developer Share Posted June 10, 2018 Testing is progressing nicely, but we need to wait for a response from a third party who's currently in Las Vegas for FlightsimExpo. Link to comment Share on other sites More sharing options...
Rhinozherous 33 Posted June 25, 2018 Share Posted June 25, 2018 On 10.6.2018 at 16:08, Hans Hartmann sagte: Testing is progressing nicely, but we need to wait for a response from a third party who's currently in Las Vegas for FlightsimExpo. Now that the expo is over... Any news? Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted June 25, 2018 Author Developer Share Posted June 25, 2018 No. The person in question came back today. I expect to hear from him in the next few days. Link to comment Share on other sites More sharing options...
altreval 1 Posted July 1, 2018 Share Posted July 1, 2018 still waiting, any news? Thanks. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted July 1, 2018 Aerosoft Share Posted July 1, 2018 Sorry we are still waiting for some feedback. Link to comment Share on other sites More sharing options...
timma 23 Posted July 2, 2018 Share Posted July 2, 2018 Still waiting, so they still in Vegas Link to comment Share on other sites More sharing options...
mante.rm 5 Posted July 2, 2018 Share Posted July 2, 2018 He can't find his way home ?????? Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 2, 2018 Author Developer Share Posted July 2, 2018 He's home since the 25th. I also emailed him.... still waiting. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 5, 2018 Author Developer Share Posted July 5, 2018 Good news: The issue has now been fixed. We will use tomorrow and the weekend for some final testing and have Aerosoft build a new installer next week. Once that is tested as well, SP1 will be available in your shop accounts (all online shops that sell the CRJ - as usual). If the rumours about FlightSimStore prove to be correct, we will offer a download option for them too. Link to comment Share on other sites More sharing options...
sfs56 0 Posted July 6, 2018 Share Posted July 6, 2018 Fantastic News.....thanks Hans. Looking forward to SP1. Link to comment Share on other sites More sharing options...
PineappleWizard 44 Posted July 6, 2018 Share Posted July 6, 2018 Good news indeed. Looking forward to dusting off the CRJ again! Link to comment Share on other sites More sharing options...
Carlonsho 1 Posted July 6, 2018 Share Posted July 6, 2018 with this update you guys are finally fix the problems with the CTD when changing the approaches or setting up direct's in the fmc? Link to comment Share on other sites More sharing options...
CaptKornDog 41 Posted July 7, 2018 Share Posted July 7, 2018 Great news. I look forward to flying the CRJ again after several months in the hangar as well. Will there be a way to map the yoke AP disconnect button (not the disconnect bar) to a joystick or key command that was briefly discussed previously? thanks. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 7, 2018 Author Developer Share Posted July 7, 2018 vor 3 Stunden , CaptKornDog sagte: Will there be a way to map the yoke AP disconnect button (not the disconnect bar) to a joystick or key command that was briefly discussed previously? The normal "Z" key toggles the AP disconnect bar. That much is correct. I'll check if there's any unused key command that I can abuse for the yoke AP DISC switch. Link to comment Share on other sites More sharing options...
Wise87 63 Posted July 11, 2018 Share Posted July 11, 2018 I take it the CRJ SP1 will out this week? Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 11, 2018 Author Developer Share Posted July 11, 2018 I just uploaded the installer to the beta testers (the installer guys at Aerosoft are pretty busy this week because the A318/A319 release is planned for tomorrow). Depending on tester feedback, the SP1 release will be either on Friday or Monday (unless showstoppers come up). Link to comment Share on other sites More sharing options...
GJL1995 35 Posted July 11, 2018 Share Posted July 11, 2018 lets hope it all works out! looking forward to flying the updated crj! Link to comment Share on other sites More sharing options...
jencas 70 Posted July 11, 2018 Share Posted July 11, 2018 vor 54 Minuten, Hans Hartmann sagte: I just uploaded the installer to the beta testers (the installer guys at Aerosoft are pretty busy this week because the A318/A319 release is planned for tomorrow). Depending on tester feedback, the SP1 release will be either on Friday or Monday (unless showstoppers come up). Good news!!! Thanks a lot for all your efforts. Link to comment Share on other sites More sharing options...
mante.rm 5 Posted July 11, 2018 Share Posted July 11, 2018 I am not satisfied with the behavior because before A318/A319???? The CRJ700/900 has been on sale for a year and more !!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
CaptKornDog 41 Posted July 11, 2018 Share Posted July 11, 2018 On 7/7/2018 at 11:41 AM, Hans Hartmann said: The normal "Z" key toggles the AP disconnect bar. That much is correct. I'll check if there's any unused key command that I can abuse for the yoke AP DISC switch. Agreed, I see the same behavior. Perhaps the Z key could be mapped to the yoke disconnect button (then subsequently could be mapped to joystick hardware)? And the disconnect bar remain just a mouse click spot? Just adds a spot of realism. I avoid using the disconnect bar as a “regular” means of disconnecting the autopilot on any aircraft since the bar is truly a backup, reversionary function. Thanks. Link to comment Share on other sites More sharing options...
Wise87 63 Posted July 13, 2018 Share Posted July 13, 2018 On 7/11/2018 at 3:17 AM, Hans Hartmann said: I just uploaded the installer to the beta testers (the installer guys at Aerosoft are pretty busy this week because the A318/A319 release is planned for tomorrow). Depending on tester feedback, the SP1 release will be either on Friday or Monday (unless showstoppers come up). Any show stoppers to report? Sure would like to fly the CRJ this weekend if everything is looking good. Link to comment Share on other sites More sharing options...
Developer Hans Hartmann 3694 Posted July 13, 2018 Author Developer Share Posted July 13, 2018 vor 1 minute, Wise87 sagte: Any show stoppers to report? Sure would like to fly the CRJ this weekend if everything is looking good. I have two things to test. Tbh I don't think I'll make it in time for AS to build a release installer. I can offer you the current installer though, if you don't want to wait for Monday. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.