Fulvio_61 0 Posted March 1, 2018 Share Posted March 1, 2018 ...the engines flames out. There is no way to relight, only bringing the fuel up to 60% using "Fuel and Payload" they start to work again. This only happens with the variant F6, not with the others. I use P3D v3.3. I wonder why . Thanks, Fulvio. Link to comment Share on other sites More sharing options...
wingman5 149 Posted March 1, 2018 Share Posted March 1, 2018 Hi Fulvio It sounds like the fuel tanks are not switching when they should , although I don't know why that should be ! which model of the F6, or is it all of them . What are your tank gauges reading when you flame out ? DR Link to comment Share on other sites More sharing options...
Fulvio_61 0 Posted March 1, 2018 Author Share Posted March 1, 2018 Hello Dave, you have hit the target, the problem is that. But I can only transfer the fuel between the wings tanks .... in the fuel situation as seen in the screenshot the engines stopped because the fuel in the two wings tanks is finished: but how can I select the other tanks, considered that does not happen automatically? Please login to display this image. Link to comment Share on other sites More sharing options...
wingman5 149 Posted March 1, 2018 Share Posted March 1, 2018 The fuel should automatically flow from first the overwings, next the ventral then flaps and finally wings .... your overwings and ventral are still full . Do you have the problem if you use a model without overwing tanks ? The fuel logic is hard coded in the mdl so shouldn't ever go wrong, are you doing a normal start with the fuel tanks full ? and what fuel state is your default saved flight . DR Link to comment Share on other sites More sharing options...
Fulvio_61 0 Posted March 2, 2018 Author Share Posted March 2, 2018 The problem was exactly the saved flight. Starting with the P3D default flight, everything is back to normal with full tanks at take off. Even the sequence overwings, ventral, flaps then wings is now correct. Thank you, Fulvio. Link to comment Share on other sites More sharing options...
JMFisher725 0 Posted February 28, 2019 Share Posted February 28, 2019 I've noticed a similar occurrence with the T-55. This doesn't always happen, but once the ventral tank is dry the aircraft won't switch to the wing tanks and then fuel is cut-off. I've found this happens more often at a higher throttle setting (usually in afterburner). I've never had this happen while flying the T-5 models. All the patched files for the panel and sound are installed and I'm running P3D4.4. Jonathan Link to comment Share on other sites More sharing options...
wingman5 149 Posted March 1, 2019 Share Posted March 1, 2019 10 hours ago, JMFisher725 said: I've noticed a similar occurrence with the T-55. This doesn't always happen, but once the ventral tank is dry the aircraft won't switch to the wing tanks and then fuel is cut-off. I've found this happens more often at a higher throttle setting (usually in afterburner). I've never had this happen while flying the T-5 models. All the patched files for the panel and sound are installed and I'm running P3D4.4. Jonathan Hi Jonathan The code for the T-55 is the same as the F6 (same tank) and so is slightly different to the T5 which uses the F3 tank. I suppose it is possible that the fuel consumption in R/H is beating the change over lag , but I put in an overlap to cater for this , so it shouldn't .. It is possible your saved flight could be telling the system there is no other fuel available...…. that fixed Fulvios problem (above0. Cheers Dave R Link to comment Share on other sites More sharing options...
JMFisher725 0 Posted March 1, 2019 Share Posted March 1, 2019 12 hours ago, wingman5 said: Hi Jonathan The code for the T-55 is the same as the F6 (same tank) and so is slightly different to the T5 which uses the F3 tank. I suppose it is possible that the fuel consumption in R/H is beating the change over lag , but I put in an overlap to cater for this , so it shouldn't .. It is possible your saved flight could be telling the system there is no other fuel available...…. that fixed Fulvios problem (above0. Cheers Dave R The default saved flight is the F-22 and it starts with 100% fuel when I run the flight. Is there something I should do differently such as saving the lightning as the default flight with 100% fuel? Thanks, Jonathan Link to comment Share on other sites More sharing options...
wingman5 149 Posted March 2, 2019 Share Posted March 2, 2019 1 hour ago, JMFisher725 said: The default saved flight is the F-22 and it starts with 100% fuel when I run the flight. Is there something I should do differently such as saving the lightning as the default flight with 100% fuel? Thanks, Jonathan Hi Jonathan It's just trial and error really , but I have a lightning as default and do not have the problem . Dave Link to comment Share on other sites More sharing options...
JMFisher725 0 Posted March 2, 2019 Share Posted March 2, 2019 5 hours ago, wingman5 said: Hi Jonathan It's just trial and error really , but I have a lightning as default and do not have the problem . Dave Sounds good, thank you. Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.