monokuro 40 Posted December 22, 2017 Share Posted December 22, 2017 Good morning, after installing Svalbard4XPlane and starting X-Plane I get an error message that the scenery could not be loaded correctly and the following entries in the log.txt (I only copied the last entries, there are a lot more with similar missing objects in the same referenced folder above these lines): 0:00:59.718 E/SCN: Custom Scenery/Aerosoft - Svalbard - ENSB/Earth nav data/+70+010/+78+015.dsf: 0:00:59.718 E/SCN: Unable to locate object: objects/industrial/EU/IND33.88x84.76.obj 0:00:59.718 E/SCN: Failed to find resource 'objects/industrial/EU/IND27.10x19.00.obj', referenced from scenery package 'Custom Scenery/Aerosoft - Svalbard - ENSB/'. 0:00:59.718 E/SCN: Custom Scenery/Aerosoft - Svalbard - ENSB/Earth nav data/+70+010/+78+015.dsf: 0:00:59.718 E/SCN: Unable to locate object: objects/industrial/EU/IND27.10x19.00.obj I can't find a folder "objects/industrial/EU" in my X-Plane folder(s). Neither in the actual scenery folder for Svalbard nor anywhere else. Also, where would one have to copy the extra livery folder for the B200? I assume you would only have to do this when you have the Carenado B200? In addition, there is no documentation on the mod tool for copying the winter textures. Again, one will have to assume where to copy what. Also, there are two "JGSME.exe" files (the other one is named "JGSME_1.exe"). I would assume it's just a duplicate, but then again, who knows... Any help is appreciated. And as a hint, a documentation / manual would be nice, but perhaps I overlooked it? Thanks, Jan Link to comment Share on other sites More sharing options...
monokuro 40 Posted December 22, 2017 Author Share Posted December 22, 2017 As a follow-up: I did find the manual now. It may have been too early this morning so I didn't spot it :). I also did a re-download and re-install of the scenery because somehow all files seem to be duplicate after the extraction - I might have extracted the archive twice - so, presumably my bad. That said, the issue with the missing resources remains. So any help there would be appreciated :). Thanks, Jan Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted December 22, 2017 Administrator Share Posted December 22, 2017 Hello Jan,, i have sent the problem to the developer. We are working on that. I hope we can upload a good version quickly .... Sorry for the issue... Greets Heinz Link to comment Share on other sites More sharing options...
monokuro 40 Posted December 22, 2017 Author Share Posted December 22, 2017 Many thanks Heinz. Looking forward to the update :). Merry Christmas, Jan Link to comment Share on other sites More sharing options...
Marten 80 Posted December 23, 2017 Share Posted December 23, 2017 Hi Jan, The missing resources have already been fixed. We are waiting for aerosoft to upload the update. Probably shortly after Christmas. Cheers Marten Link to comment Share on other sites More sharing options...
monokuro 40 Posted December 23, 2017 Author Share Posted December 23, 2017 Many thanks Marten for the quick reaction. Highly appreciated. Merry Xmas Jan Link to comment Share on other sites More sharing options...
MrGeeBee 3 Posted December 23, 2017 Share Posted December 23, 2017 You can install World2XPlane Model Library in the meanwhile, it solves the conflict.https://forums.x-plane.org/index.php?/files/file/32135-world-models-library/ Link to comment Share on other sites More sharing options...
monokuro 40 Posted December 24, 2017 Author Share Posted December 24, 2017 Thanks for that hint. However, I had not and did not plan to install W2XP because with XP11.11+ this shouldn't really be necessary? I think XP11.10 overhauled all objects, in particular in Europe, thus at least for me I don't see the need for additional models. It may solve this particular conflict, but I'd rather have a lean XP installation and wait for the models from the developer :). But in any case, many thanks for the tip :). Jan Link to comment Share on other sites More sharing options...
launchee 0 Posted December 24, 2017 Share Posted December 24, 2017 I have the same problem. I was installing the Steam version of the addon. When can I expect the fix for this issue? Thanks Link to comment Share on other sites More sharing options...
paulsk 1 Posted December 27, 2017 Share Posted December 27, 2017 #metoo. I made a complaint to Aerosoft GmbH. I received rapidly a satisfying reply from their Customer Service. Thanks Heinz. In the mean time I resolved the "missing resources" problem after installing the Svalbard4XPlane product, by downloading "World models 0.8.0" library from the website X-Plained.com. See the attached edited screenshot. You have to sign-up to be able to download this library. Copy this library folder and all its subfolders to the "Custom scenery" folder of X-Plane 11. All the "missing resources" will now be found and the "BE ADVISED" pop-up window regarding Svalbard4XPlane at the start of X-Plane 11 will not appear any more. At least it did on my PC (MS Windows 10 Pro, Version 1703). Sure my solution is a temporary work around. The developers should have included these resources into the product. It sure was a mistake to leave these resources out of the package. A scenery package that is sold for € 46.46 should work flawlessly out-of-the-box. I feel that the product also is missing an installation instruction at the top level in the package. That could have been a simple README.txt or so. After unpacking the .zip file and traversing most of the subfolders I found a user manual. I also think that Svalbard4XPlane should come with an installer as many of the payware sceneries sold by Aerosoft GmbH have. Even if the developers have the opinion that installing a product like Svalbard4XPlane is a simple thing to do. Not all customers are professional PC users. They want a "quick and easy" install. Not having to dig for a manual first and then spend more time to learn how to install the add-on. It is a pity that Svalbard4XPlane came out with these shortcomings because the scenery itself is very nice. The past days I made several flights in the area. I even made a night flight from ENSB to ENSA. Beautiful. I also happened to spot the aircraft carrier USS Nimitz in the vicinity of ENSB. I made a successful deck landing on the Nimitz with a Cessna 172. The rest of what I saw and heard that very moment I leave for you to discover. I wish y'all many happy landings in 2018 especially in Svalbard (Spitsbergen). Paulsk Please login to display this image. Link to comment Share on other sites More sharing options...
Mario Donick 271 Posted January 2, 2018 Share Posted January 2, 2018 On 24.12.2017 at 07:37, monokuro sagte: I had not and did not plan to install W2XP because with XP11.11+ this shouldn't really be necessary? I think XP11.10 overhauled all objects, in particular in Europe, thus at least for me I don't see the need for additional models. Just for explanation: The W2XP library does not add any objects at all to what you see in regular autogen (and only for this some objects were added in 11.10). But this library is used by a lot of scenery as requirement, in particular freeware scenery, so it's good to have it installed anyway (except you are short on HDD space). Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted January 2, 2018 Administrator Share Posted January 2, 2018 Hello, new Version available. Greets Heinz Link to comment Share on other sites More sharing options...
monokuro 40 Posted January 15, 2018 Author Share Posted January 15, 2018 Many thanks Heinz. Just to report back: The scenery now works flawlessly. Many thanks for your help. Jan Link to comment Share on other sites More sharing options...
Administrator Heinz Flichtbeil 1609 Posted January 15, 2018 Administrator Share Posted January 15, 2018 Thank you for the Info Jan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.