Motormike 16 Posted August 10, 2017 Share Posted August 10, 2017 Before i had no trouble with it, with 1.005 it flies Zickzack around the FMS path. Drivin me nuts. Instead of follwing the path it goes left right left right etc...it do not settle down on the FMS path I tried also dir intc, doesn't help still flying like drunk around path Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 Umm no, i must correct now...meanwhile it flies away from path... Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 After the next dir intercept there was a line to the choosen waypoint, which it headed and this disappeared as soon the CRJ was on drawed track, is this normal? Please login to display this image. Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 Ok, and now it crashed to the desktop, maybe PCs fault (ntdll.dll). Had this not for ages. Name der fehlerhaften Anwendung: Prepar3D.exe, Version: 4.0.28.21686, Zeitstempel: 0x594a7255 Name des fehlerhaften Moduls: ntdll.dll, Version: 10.0.15063.447, Zeitstempel: 0xa329d3a8 Ausnahmecode: 0xc0000374 Fehleroffset: 0x00000000000f775f ID des fehlerhaften Prozesses: 0x48e0 Startzeit der fehlerhaften Anwendung: 0x01d311be908e306b Pfad der fehlerhaften Anwendung: G:\Lockheed Martin\Prepar3D v4\Prepar3D.exe Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll Berichtskennung: 3cf6f705-96ef-4590-bb43-be6801287aae Vollständiger Name des fehlerhaften Pakets: Anwendungs-ID, die relativ zum fehlerhaften Paket ist: Please login to display this image. Link to comment Share on other sites More sharing options...
Airbus666 13 Posted August 10, 2017 Share Posted August 10, 2017 I have the flightpath problem as well. Link to comment Share on other sites More sharing options...
GJL1995 35 Posted August 10, 2017 Share Posted August 10, 2017 Same here it is not capable of maintaining the route extremly enoying i know it is a manual aircraft but having to track my flightplan in hdg mode goes a step to far time to go back to the ngx for the time being Link to comment Share on other sites More sharing options...
Michel Montreuil 10 Posted August 10, 2017 Share Posted August 10, 2017 Great just downloaded and installed :/ Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 OK, it seems that I fixed A and broke B. I sincerely apologize for that. Just to be sure: Did everyone who has this issue use the DIR INTC function (or copy&paste on the LEGS page) before it happened? Link to comment Share on other sites More sharing options...
GJL1995 35 Posted August 10, 2017 Share Posted August 10, 2017 for me thats a yes! i tried bringing it back on course with giving it a dct! Link to comment Share on other sites More sharing options...
Airbus666 13 Posted August 10, 2017 Share Posted August 10, 2017 vor 1 minute, Hans Hartmann sagte: OK, it seems that I fixed A and broke B. I sincerely apologize for that. Just to be sure: Did everyone who has this issue use the DIR INTC function (or copy&paste on the LEGS page) before it happened? When I configured my FMC I had a discontinuity and there I used the copy&paste function to overwrite the discon. Is it this what you mean? Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 No worries, is software, always a mess if new Copy and paste first and after this in air dir intc to get it there where i want it Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 Just now, Airbus666 said: Is it this what you mean? Yes, that's it. Thanks for responding so quickly. I'll sit down and fix it now. Link to comment Share on other sites More sharing options...
Airbus666 13 Posted August 10, 2017 Share Posted August 10, 2017 vor 1 minute, Hans Hartmann sagte: Yes, that's it. Thanks for responding so quickly. I'll sit down and fix it now. Amazing, much appreciated. Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 17 minutes ago, Airbus666 said: Amazing, much appreciated. And this time, I'm going to check what else I break by fixing this... this was embarrassing and I don't want it to happen again! Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 10, 2017 Share Posted August 10, 2017 Side effects are real headache ;-) Link to comment Share on other sites More sharing options...
JRBarrett 675 Posted August 10, 2017 Share Posted August 10, 2017 OK, it seems that I fixed A and broke B. I sincerely apologize for that. Just to be sure: Did everyone who has this issue use the DIR INTC function (or copy&paste on the LEGS page) before it happened? It happened to me shortly after I dialed down my altitude while approaching the TOD. I had NOT used DIR INTC up to that point, and the NAV tracking had been fine - when the FMS CDI suddenly deflected full left. I did try to use the DIR function to get back on track to the upcoming waypoint, but although the MFD course line was redrawn correctly, the CDI remained deflected fully left from that point until I switched to LOC mode to shoot the approach. (I flew the entire descent in HDG SELECT). Jim Barrett Link to comment Share on other sites More sharing options...
Timelord 1 Posted August 10, 2017 Share Posted August 10, 2017 Hi, did not have a CTD but also problems with followig the course. Had a short track from TNCM to MDPC. After takeoff from 10 the bird startet it's right turn but did not follow the programmed course. Everything was set correktly in my opinon. No discontinuities, Selector to FMS1 and so on. When I reached cruise altitude I tried to make a direct to the next waypoint by selecting it on the legs-page and pressing exec. The route was accepted but when I switcht AP back to NAV the CRJ started again to fly circles. Link to comment Share on other sites More sharing options...
Wise87 63 Posted August 10, 2017 Share Posted August 10, 2017 I plan on flying the CRJ when I get home. I installed 1.0.0.5 this morning before work. I hope I still have 1.0.0.4 in my downloads folder. Link to comment Share on other sites More sharing options...
Skyflyerification 9 Posted August 10, 2017 Share Posted August 10, 2017 Same experience on my end. CRJ having difficulty maintaining path, and path vanishing after getting on course by using HDG mode. Looking forward to a solution. Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 The problem should be fixed now, but since it's a pretty annoying one, Mathijs and I decided to offer it as an experimental version to those of you who don't want to wait until the next installer is released. "Experimental" means that it has only been tested by me and wasn't run by the beta team. You can find the files attached to this post. A readme with information where to copy the DLL is included. Please make sure to exit FSX/P3D before copying those files. If you run into any problems with this version, please make sure to mention that you are using version 1.0.0.5c when you post them. I hope this helps. ASCRJ_1005c.7z Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 Ok, switched extern GPU on Switched batterie, service and ac Set Nav align switches And then just looking outside Crash with Dumbfile Restart, til now no crash... Powered plane up, then i tried to remove GPU with Dave...dont function, it stays also if driving around on the airport. Please login to display this image. Please login to display this image. Please login to display this image. Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 Can you upload the minidump file please? Dropbox, Onedrive, Google drive. Just not mega.co.nz or anything with a dodgy country domain the the (.ru etc.) - I won't click on those links Link to comment Share on other sites More sharing options...
Motormike 16 Posted August 10, 2017 Author Share Posted August 10, 2017 Yep, will need one hour...we just use drums in this area Link to comment Share on other sites More sharing options...
Hans Hartmann [OLD] 1419 Posted August 10, 2017 Share Posted August 10, 2017 16 minutes ago, Motormike said: Yep, will need one hour...we just you use drums in this area I'm used to it. It's the same at Aerosoft and where Mathijs lives. I need less time to download FSX and P3D than he needs to download the CRJ Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 10, 2017 Share Posted August 10, 2017 2 hours ago, Hans Hartmann said: The problem should be fixed now, but since it's a pretty annoying one, Mathijs and I decided to offer it as an experimental version to those of you who don't want to wait until the next installer is released. "Experimental" means that it has only been tested by me and wasn't run by the beta team. You can find the files attached to this post. A readme with information where to copy the DLL is included. Please make sure to exit FSX/P3D before copying those files. If you run into any problems with this version, please make sure to mention that you are using version 1.0.0.5c when you post them. I hope this helps. ASCRJ_1005c.7z conventional departure tracking a vor, then dir to & switching to fms, dir to, dir to, then switching to tracking a loc... everything works deliciously! many congrats Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.