Muffo 9 Posted August 5, 2017 Share Posted August 5, 2017 Today I made my first flight with this new airplane. When I tried to intercept localizer on Lime, the airplane began mad...I thought that it was a scenery problem, I tried in other airport...same problem! I tried other airplane : same problem.....Finally I found the problem....CRJ is influnced by gps mode.... If you use an airplane with default or other gps, if it is on gps mode and you forget to change from gps mode to nav mode...the Crj will follow the fms but willn't intercept the localizer. Link to comment Share on other sites More sharing options...
Aerosoft Aerosoft Team [Inactive Account] 51558 Posted August 5, 2017 Aerosoft Share Posted August 5, 2017 So it could indicate the CRJ does not set that parameter. we'll check, thanks for the input! Link to comment Share on other sites More sharing options...
Muffo 9 Posted August 6, 2017 Author Share Posted August 6, 2017 happy to have been useful Link to comment Share on other sites More sharing options...
bhorv67 12 Posted August 6, 2017 Share Posted August 6, 2017 This is my issue as well. Indeed the way they CRJ has been simulated is the pilot must change the source to LOC from FMS. My trouble is I can't hide the yoke and the source selector is hidden behind the yoke. The clickspot for me doesn't work. Link to comment Share on other sites More sharing options...
FraPre 89 Posted August 6, 2017 Share Posted August 6, 2017 The problem is, Sometimes it works, sometimes not. I click immediately after the simulation start, then it works. I forget that and change the views, or open sub panels, i can have bad luck and do not get it away. Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 On 06-08-2017 at 6:12 PM, FraPre said: The problem is, Sometimes it works, sometimes not. I click immediately after the simulation start, then it works. I forget that and change the views, or open sub panels, i can have bad luck and do not get it away. It's my experience, that if you load a default airplane in 2D cockpit and then change to CRJ, then the clickspot do not work. If you have the default plane open in 3D cockpit before changing to CRJ, it works. Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 I have frequently problems with the LOC. Nav-source is changed from FMS1 to LOC (green pointers), autopilot on, 210 kn, but approaching the ILS in 30 degrees in HDG select, the autopilot do not respond on the LOC. The plan perceed on HDG course. Tried to do a 360 degree circle for a new approach, but the same happens. Next time I open the simulator for flying, it works. Link to comment Share on other sites More sharing options...
FraPre 89 Posted August 8, 2017 Share Posted August 8, 2017 Which airport, which rwy, which course? Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 Happend on EKBI rwy 27 (course 266 - ILS 110.7) as well as EKCH rwy 22L (course 219 ILS 109.5). APPR armed, but do not allways activate. Sometime it works and sometimes not. Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 Now it worked. I think maybee, that my course was not set correctly. When setting course, alt and heading in 'before engine start'-mode, it all changes when activation 'before taxi'-mode. Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 Something is definately wrong. This time I approached ENGM rwy 19L in HDG-mode. Rwy course is 194 which was set in Course NAV1. ILS frq 10.55 set in the FMS radio. I intercepted on course 220. Nav selector on LOC/VOR - green pointers. Speed 210 kn. LOC and GS armed and a bit later activated. Never the less the plan continued on heading 220, passing the ILS without reacting. Link to comment Share on other sites More sharing options...
FraPre 89 Posted August 8, 2017 Share Posted August 8, 2017 You have an picture, please? Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 8, 2017 Share Posted August 8, 2017 Too late - sorry. Is it a screenshot from the cockpit-panel you ask for? I think the description explain all settings. I forgot to mention, that autopilot was of course armed. I cant really see, where I'm doing wrong. And from time to time it works - strange. Link to comment Share on other sites More sharing options...
Edvardo 1 Posted August 8, 2017 Share Posted August 8, 2017 Hi Same story in my case (FSX). I don't have a problem with LOC capture. GS is problematic. Sometimes it works and sometimes not. Everything is set as should be. Below GS in VOR/LOC mode, freq and course set. LOC Active (GREEN), GS ARMED (White). GS never became active. In one case aircraft followed GS although GS was only ARMED (WHITE). I hope new hotfix will solve the problem with this basic function. Thanks Link to comment Share on other sites More sharing options...
FraPre 89 Posted August 8, 2017 Share Posted August 8, 2017 vor 7 Minuten, Mogens Gaardbo sagte: Too late - sorry. Is it a screenshot from the cockpit-panel you ask for? I think the description explain all settings. I forgot to mention, that autopilot was of course armed..... Yes, i means pictures from the PFD, ND and MCP Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 9, 2017 Share Posted August 9, 2017 13 hours ago, FraPre said: Yes, i means pictures from the PFD, ND and MCP I will do that during the day when I fly the plane again. In the meantime could you confirm the following conditions for ILS-landings: Correct course set in Course Nav1 Correct ILD frq Nav-selector on VOR/LOC (green pointersw) Autopilot engaged APPR pressed Correct altitude for the ILS (below GS) Speed 180-220 kn Angel of approach =< 30 degrees LOC activated before GS Whar more is important??? Link to comment Share on other sites More sharing options...
Mogens Gaardbo 0 Posted August 9, 2017 Share Posted August 9, 2017 Sorry - not able to post photos. Placed two in my DropBox - tryed to import the URL. The line got red and nothing more happened. But the missing capture of IRS continued. Green pointers, correct course and frq. LOC1 activated, but the plane continue on present heading. Link to comment Share on other sites More sharing options...
hbzug 1 Posted August 9, 2017 Share Posted August 9, 2017 My problem (FSX SE): I have localizer - , but no glideslope indication at all. Setting the AP in approach mode, the PFD indicates LOC, but GS is flashing. The MFD (set on HSI mode) doesn't indicate LOC and GS at all - as it should according to the manuals. The AP intercepts the LOC with some difficulty, but there is no vertical guidance. I tried several different ILS's, but the problem is consistent. I'm probably using the first version, and haven't been able to download a newer version from Simmarket yet. Also, I haven't found any discription of this problem in the forums and don't know if it is a bug that has been fixed in recent software updates. Link to comment Share on other sites More sharing options...
blahhh 41 Posted August 10, 2017 Share Posted August 10, 2017 13 hours ago, hbzug said: My problem (FSX SE): I have localizer - , but no glideslope indication at all. Setting the AP in approach mode, the PFD indicates LOC, but GS is flashing. The MFD (set on HSI mode) doesn't indicate LOC and GS at all - as it should according to the manuals. The AP intercepts the LOC with some difficulty, but there is no vertical guidance. I tried several different ILS's, but the problem is consistent. I'm probably using the first version, and haven't been able to download a newer version from Simmarket yet. Also, I haven't found any discription of this problem in the forums and don't know if it is a bug that has been fixed in recent software updates. if you're using the first release I also had this issue but it was resolved with updates. Just wait for the next release on simmarket. Link to comment Share on other sites More sharing options...
hbzug 1 Posted August 10, 2017 Share Posted August 10, 2017 Okay, thank you. I hope it won't last too long ... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.