Jump to content

767 Sound weg

mczell

By mczell
in FlightFactor Flugzeuge

Recommended Posts

mczell Newbie

mczell 27

Posted
Posted

Liebe Community.

Wenn ich das neuste Update der 767 unter Xplane 10.50r2 lade gehen alle Sounds noch. Sobald ich nun die Sich wechsel aus dem Cockpit heraus scheint die Soundengine nicht mehr zu funktionieren. Weiß jemand Rat?

 

Log.txt Ausschnitt:

FlyWithLua Info: Load exit file.
FlyWithLua Info: Load exit file.
FlyWithLua Info: FlyWithLua plugin disabled.
G64: 419.475: Plugin Disable..
G64: 419.475: GizmoCore::Stop()..
G64: 419.515: UnRegister Callbacks..
G64: 419.515: Destroying Mouse Trap..
G64: 419.515: UnRegister key sniffer..
G64: 419.515: Killing curl..
G64: 419.515: Killing mapping..
G64: 419.587: Killing particles..
G64: 419.588: Thread sleep..
G64: 419.788: curl_global_cleanup..
G64: 419.788: Plugin Disabled.
SkyMaxx Pro: SilverLining deleted.
[757767] Disable ...
[757767] Unregistering callbacks ...
[757767] Unregistering callbacks - done.
[757767] Destroying objects ...
[757767] Destroying objects - done.
[757767] Save and destroy settings ...
[757767] Save and destroy settings - done.
[757767] Disabled.
[TGDS] Disabling...
[REFL] Disable... 
[REFL] Disabled
[SASL INFO] "panel"    Allocated for LUA: 40748480 bytes
[SASL INFO] "panel"    Global max used by LUA: 12553211 bytes
[SASL INFO] "panel"    ____________________________________________________
G64: 422.819: XPluginStop() complete.
JARDesign Ground Handling 3D Sound Engine Disable 
SkyMaxx Pro: Exiting XPluginStop() of SilverLining
XL: 0 : 
XL: 0 : ATC LOG ----------------------------------- 
XL: 0 : ATC LOG END ---------------------------- 
XL: 0 : 
XL 3D Sound Engine Disable 
XPrealWX: cleaning up
XPrealWX: disconnect callbacks
XPrealWX: server stop
[757767] Unloading ...
[757767] Unloaded.
0:06:50.712 I/JOY: UNREGISTER Joystick device: T.Flight Hotas X - VID:1103PID:45320
0:06:50.712 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----
 

Link to comment
Share on other sites
Mario Donick Newbie

Mario Donick 271

Posted
Posted

Dein log.txt-Ausschnitt ist etwas unglücklich gewählt, weil das nur zeigt, was beim Beenden von X-Plane passiert, aber nicht das, was während der Nutzung geschieht.

 

Besser wäre es, du hängst die gesamte log.txt als Anhang an deinen Post an.

Link to comment
Share on other sites
mczell Newbie

mczell 27

Posted
  • Author
Posted

Ja nur leider geht der Upload nicht. Ich kopiere einfach alles mal rein.

 

log.txt for X-Plane 10.50 (build 105008 64-bit)
 compiled on Aug 15 2016 14:48:36
X-Plane started on Thu Aug 25 15:48:22 2016

This log file is generated automatically by Laminar Research applications and contains diagnostics about your graphics hardware, installation, and any error conditions.
If you need to contact tech support or file a bug, please send us this file. NOTE: this file is rewritten every time you start ANY of your X-System applications.

Windows 10.0 (build 10586/2)
This is a 64-bit version of Windows.
CPU type: 8664
Physical Memory (total for computer): 17101524992
Maximum Virtual Memory (for X-Plane only): 140737488224256
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592
CPU 0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz  Speed (mhz): 3592

X-System folder:'D:\Program Files (x86)/X-Plane 10/', case sensitive=0

WGL_ARB_buffer_region WGL_ARB_create_context WGL_ARB_create_context_profile WGL_ARB_create_context_robustness WGL_ARB_context_flush_control WGL_ARB_extensions_string WGL_ARB_make_current_read WGL_ARB_multisample WGL_ARB_pbuffer WGL_ARB_pixel_format WGL_ARB_pixel_format_float WGL_ARB_render_texture WGL_ATI_pixel_format_float WGL_EXT_create_context_es_profile WGL_EXT_create_context_es2_profile WGL_EXT_extensions_string WGL_EXT_framebuffer_sRGB WGL_EXT_pixel_format_packed_float WGL_EXT_swap_control WGL_EXT_swap_control_tear WGL_NVX_DX_interop WGL_NV_DX_interop WGL_NV_DX_interop2 WGL_NV_copy_image WGL_NV_delay_before_swap WGL_NV_float_buffer WGL_NV_multisample_coverage WGL_NV_render_depth_texture WGL_NV_render_texture_rectangle 

OpenGL Vendor    : NVIDIA Corporation
OpenGL Render    : GeForce GTX 680/PCIe/SSE2
OpenGL Version   : 4.5.0 NVIDIA 372.54 (450/0)
OpenGL Extensions: GL_AMD_multi_draw_indirect GL_AMD_seamless_cubemap_per_texture GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_bindless_texture GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_compute_shader GL_ARB_compute_variable_group_size GL_ARB_conditional_render_inverted GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_direct_state_access GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_indirect GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_enhanced_layouts GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_ES3_1_compatibility GL_ARB_ES3_2_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_gl_spirv GL_ARB_gpu_shader5 GL_ARB_gpu_shader_fp64 GL_ARB_gpu_shader_int64 GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_indirect_parameters GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multi_draw_indirect GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_parallel_shader_compile GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counter_ops GL_ARB_shader_atomic_counters GL_ARB_shader_ballot GL_ARB_shader_bit_encoding GL_ARB_shader_clock GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_storage_buffer_object GL_ARB_shader_subroutine GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_sparse_buffer GL_ARB_sparse_texture GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_tessellation_shader GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_object_rgb32 GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_64bit GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shader_image_load_store GL_EXT_shader_integer_mix GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback2 GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_vertex_attrib_64bit GL_EXT_window_rectangles GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_context_flush_control GL_KHR_debug GL_KHR_no_error GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KTX_buffer_region GL_NV_alpha_to_coverage_dither_control GL_NV_bindless_multi_draw_indirect GL_NV_bindless_multi_draw_indirect_count GL_NV_bindless_texture GL_NV_blend_equation_advanced GL_NV_blend_square GL_NV_command_list GL_NV_compute_program5 GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_draw_texture GL_NV_draw_vulkan_image GL_NV_ES1_1_compatibility GL_NV_ES3_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_internalformat_sample_query GL_NV_gpu_program4_1 GL_NV_gpu_program5 GL_NV_gpu_program5_mem_extended GL_NV_gpu_program_fp64 GL_NV_gpu_shader5 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_atomic_counters GL_NV_shader_atomic_float GL_NV_shader_buffer_load GL_NV_shader_storage_buffer_object GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_transform_feedback2 GL_NV_uniform_buffer_unified_memory GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_attrib_integer_64bit GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_NVX_multigpu_info GL_NVX_nvenc_interop GL_NV_shader_thread_group GL_NV_shader_thread_shuffle GL_KHR_blend_equation_advanced GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control 

threaded_avail   : 1    aniso_avail      : 1    timer_avail      : 1    sync/fence       : 1
pbo_avail        : 1    frameblit_avail  : 1
gpu_shad4_avail  : 1    shad_lod_avail   : 1    array_tex_avail  : 1    texture_rg       : 1
tex_float_avail  : 1    seamless_avail   : 1    drawbuf2_avail   : 1    packed_stencil   : 1
framebuffer_srgb : 1    copy_buf_avail   : 1    ubo_avail        : 1    gshader_avail    : 1
base_vert_avail  : 1
instance_avail   : 1    dis_fog_avail    : 1    pinned_avail     : 0    debug_avail      : 1
max tex units    : 32 (32/8)
max iso filtering: 16.000000
max texture size : 16384 (hardware limit)
max point size   : 189.875000
idx in vram      : 1
GLSL Version     :4.50 NVIDIA/450
first-gen shaders: 0
(16/4096/124/192/32/4096/4096)
This video card is: DX10 or 11 - With instancing
CPU count        : 8
OpenAL loaded: Resources/dlls/64/openal32.dll
OpenAL devices: OpenAL Soft
Open AL default device:OpenAL Soft
OpenAL vendor    : OpenAL Community
OpenAL renderer  : OpenAL Soft
OpenAL version   : 1.1
OpenAL hardware  : OpenAL Soft
OpenAL extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_DEDICATED ALC_EXT_disconnect ALC_EXT_EFX ALC_EXT_thread_local_context ALC_SOFTX_device_clock ALC_SOFTX_HRTF ALC_SOFT_loopback ALC_SOFTX_midi_interface ALC_SOFT_pause_device AL_EXT_ALAW AL_EXT_DOUBLE AL_EXT_EXPONENT_DISTANCE AL_EXT_FLOAT32 AL_EXT_IMA4 AL_EXT_LINEAR_DISTANCE AL_EXT_MCFORMATS AL_EXT_MULAW AL_EXT_MULAW_MCFORMATS AL_EXT_OFFSET AL_EXT_source_distance_model AL_LOKI_quadriphonic AL_SOFT_block_alignment AL_SOFT_buffer_samples AL_SOFT_buffer_sub_data AL_SOFT_deferred_updates AL_SOFT_direct_channels AL_SOFT_loop_points AL_SOFT_MSADPCM AL_SOFT_source_latency AL_SOFT_source_length

Fetching plugins for D:\Program Files (x86)/X-Plane 10/Resources/plugins

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/PluginAdmin/64/win.xpl (xpsdk.examples.pluginadmin).

D:\Program Files (x86)/X-Plane 10/Resources/plugins/FJCC_x737FMC_mac.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FJCC_x737FMC_mac.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

D:\Program Files (x86)/X-Plane 10/Resources/plugins/FJCC_x737FMC_win32.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FJCC_x737FMC_win32.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)


Loaded UFMC/x737FMC plugin, all initialization done. Current version is V3.1 is copyright FJCC@2014, Javier Cortes.
He abierto D:\Program Files (x86)\X-Plane 10\Resources\default data\earth_awy.dat
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FJCC_x737FMC_win64.xpl (FJCC.x737FMC).

D:\Program Files (x86)/X-Plane 10/Resources/plugins/X-IvAp-32.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: D:\Program Files (x86)/X-Plane 10/Resources/plugins/X-IvAp-32.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

My resources directory is: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\
SoundInit done
Graphics Init done
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/X-IvAp-64.xpl (ivao.xivap).

D:\Program Files (x86)/X-Plane 10/Resources/plugins/XPPassengers.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: D:\Program Files (x86)/X-Plane 10/Resources/plugins/XPPassengers.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

D:\Program Files (x86)/X-Plane 10/Resources/plugins/g2xpl.xpl : Error Code = 193 : %1 ist keine zulässige Win32-Anwendung.
Failed: D:\Program Files (x86)/X-Plane 10/Resources/plugins/g2xpl.xpl.  (This file is missing, not a DLL or could not be loaded due to another missing DLL.)

XPluginReceiveMessage : Error Code = 127 : Die angegebene Prozedur wurde nicht gefunden.
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/g2xpl_64.xpl (ver 6.71).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/AutoGate/64/win.xpl (Marginal.AutoGate).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/BluFX/64/win.xpl (de.bwravencl.blu_fx).

CustomSBDatarefs004 - parsing setup file
CustomSBDatarefs004 - parsing successful
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/CustomSBDatarefs004/64/win.xpl (sandybarbour.projects.customsbdatarefs004).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/DataRefEditor/64/win.xpl (xplanesdk.examples.DataRefEditor).

FlyWithLua: Your system path is D:\Program Files (x86)/X-Plane 10/
FlyWithLua: Plugin Dir: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FlyWithLua
FlyWithLua: Plugin Scripts Dir: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FlyWithLua/Scripts
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/FlyWithLua/64/win.xpl (CarstenLynker.FlyWithLua).

G64:943287.435: Starting up..
G64:   0.000: Gizmo64: v15.12.22.1106 Windows
G64:   0.000:      built: Dec 22 2015, 11:56:35
G64:   0.000: Machine ID:(89da8a1d008925537d4e028b8c913951)
G64:   0.000: Graphics Init..
G64:   0.001: XPluginStart() complete.
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/Gizmo64.plugin/64/win.xpl (gizmo.x-plugins.com).

Ground Handling Plugin by JARDesign v.220116 for X-Plane 10
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/GndHandling/win.xpl (jardesign.crew.ground.handling).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/HeadShake/64/win.xpl (com.simcoders.headshake).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/PilotView/64/win.xpl (sandybarbour.projects.pilotview).

PythonInterfaceVersionNumber = 2.73.06
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/PythonInterface/64/win.xpl (sandybarbour.projects.pythoninterface).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/RealWeatherConnector/64/win.xpl (Sundog.MetarBridge).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/SeaTraffic/64/win.xpl (Marginal.SeaTraffic).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/SilverLining/64/win.xpl (SilverLiningV3.Clouds).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/WorldTraffic/64/win.xpl (cjs.util.worldtraffic).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/WorldTrafficRTG/64/win.xpl (cjs.util.worldtraffic_rtg).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/WorldTrafficRadar/64/win.xpl (classicjetsims.wt_radar).

X-Life plugin by JARDesign Ver.1.1r1 290516
XL: 0 : UUID=d54ea047-3565-4a04-b610-c0ff76850605
XL: 0 : JARDesign plugin: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-Life\Airports/airports.txt file updated.
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/X-Life/win.xpl (jardesign.x-life).

Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/XPUIPC/64/win.xpl (XPUIPC/XPWideFS.).

XPrealWX: Plugin Start
XPrealWX: GetModuleFileName
XPrealWX: init Menu
XPrealWX: Menu initialized
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/XPrealWX/64/win.xpl (XPrealWXv10.5.0.0008 Hanse-Coders (C) 2014).

Xchecklist: ver 1.09
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/Xchecklist/64/win.xpl (Michal_Bill.Example.Xchecklist).

Warning: D:\Program Files (x86)/X-Plane 10/Resources/plugins/blu_fx/64/win.xpl Signature: de.bwravencl.blu_fx. (A version of this plugin is already loaded.)
Loaded: D:\Program Files (x86)/X-Plane 10/Resources/plugins/smartcopilot2/64/win.xpl (Rhard.SmartCopilot.Plugin).

D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\Doc8643.txt returned valid fp
I found now116-116 files to load
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\.DS_Store' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._.DS_Store' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._3Point_Singles' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._A39X_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Aerion_SBJ-CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._EvenJet' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._FA7XCAT_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Heli2' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Heli_Civ' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._IVAO_CESSNA' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Jacques_mil_jet_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Light_GA' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._LJ25' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._P180' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._PC12' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Props' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._SpaceShipOne_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._WarbirdsCSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._WhiteKnight_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CSL_files_readme.txt' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\.DS_Store' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._.DS_Store' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._3Point_Singles' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._A39X_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Aerion_SBJ-CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._EvenJet' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._FA7XCAT_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Heli2' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Heli_Civ' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._IVAO_CESSNA' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Jacques_mil_jet_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Light_GA' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._LJ25' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._P180' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._PC12' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._Props' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._SpaceShipOne_CSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._WarbirdsCSL' could not be opened.
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\._WhiteKnight_CSL' could not be opened.
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\3Point_Singles\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\3Point_Twins\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\A319\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\A320\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\A332\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\A39X_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Aerion_SBJ-CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AIRBUS\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AMXCSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AN\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\An-124-CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AT75\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AvroArrowCSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\AVROLINER\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B-1B_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B703\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B727_URF3\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B738\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B741\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B742\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B744\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B744F\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B747-8I\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B74S_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B752\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B763\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B772\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B773\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B77L\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\B77W\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Be200CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\BOEING1\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\BOEING3\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\C-17\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\C130\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\C133\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\C337\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CARS\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Cicada_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CL30\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Concorde\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CRJ2\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CSL_E190\xsb_aircraft.txt
XSB WARNING: package 'D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\CSL_files_readme.txt' could not be opened.
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\D228\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\D328\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\DA40\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\DC_3_hd\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\DHC\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\E190\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\EvenJet\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\F16\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\F86E\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\FA7XCAT_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\FOKKER\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\gliderCSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\HELI\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Heli2\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Heli_Civ\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Heli_Mil\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\IL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\IL76\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\IVAO_CESSNA\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Jacques_mil_jet_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\JetstreamCSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Light_GA\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\LJ25\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\MD11\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\MD80\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\MG29\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\MI8\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\MILITARY\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Mil_Bombers_Jet\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Mil_Fighters_Jet\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\P180\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\PC12\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\PIPERS_CSL_C74\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\PROP\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Rallye\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\RFB-Fanliner\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Seaplanes_Prop\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\SpaceShipOne_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Spitfire_hd\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\SR-71_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\SSJ_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\SU27\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Transport_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\TU\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\Tu-160_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\TU144\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\TURPROP2\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\UH60_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\WarbirdsCSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\WhiteKnight_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\XB-70_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\XPFR_CSL\xsb_aircraft.txt
XSB: Loading package: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-IvAp Resources\CSL\YAK\xsb_aircraft.txt
G64:   1.265: XPluginEnable..
G64:   1.265: Starting threads..
G64:   1.265: Init Mapping..
G64:   1.346: Register Callbacks..
G64:   1.346: Aircraft Details: Not ready.
G64:   1.346: GizmoCore::Start()..
G64:   1.348: Boot Count: 1
G64:   1.381: Plugin Enabled.
SkyMaxx Pro: SilverLining initialized OK.
Found stats plugin: 8
 ==== CHANGING LANGUAGE TO: Deutsch. ====
ERROR: language file line 'AOA-20====' missing right side translation.
ERROR: language file line 'AOA-180====' missing right side translation.
ERROR: language file line 'Wing L/D====' missing right side translation.
ERROR: language file line 'linear range { This is the range of angle of attack (from 0 in either direction) that provides a linear increase in lift.====' missing right side translation.
ERROR: language file line 'lift power { Tune this number so the lift curve transitions smoothly into the stall.====' missing right side translation.
ERROR: language file line 'stall drop { This is an indication of how sharp the stall is... a foil with a sharper stall will lose lift more abruptly when the wing goes to too high an angle of attack. A larger number here will result in a more sudden stall with a sharper drop of the airplane in flight.====' missing right side translation.
ERROR: language file line 'stall power { Tune this number so the lift curve transitions smoothly after the stall.====' missing right side translation.
ERROR: language file line 'stalled drop { This is an indication of how much lift is lost after the stall... thick and supercritical airfoils lose little lift, but thin low-drag airfoils lose a lot of lift here.====' missing right side translation.
ERROR: language file line 'min-cd cl { This is the coefficient of lift at which the minimum drag coefficient is achieved. It is probably close to the lift intercept value you entered above.====' missing right side translation.
ERROR: language file line 'cd alpha=10 { This is the parasite drag coefficient of the airfoil at an angle of attack of 10 degrees.====' missing right side translation.
ERROR: language file line 'cd power { This number is theoretically close to 2.0, but you can tune it to fit actual data.====' missing right side translation.
ERROR: language file line 'buck cl { Some airfoils have a certain angle of attack range where the airflow is laminar, resulting in very low drag. This is the lift coefficient of the laminar flow low-drag bucket, if any.====' missing right side translation.
ERROR: language file line 'buck width { This is how wide the low-drag laminar flow bucket is, in terms of lift coefficient. It is the lift coefficient range across which drag is reduced by laminar flow.====' missing right side translation.
ERROR: language file line 'buck depth { This is how much the coefficient of drag is reduced by laminar flow (if any).====' missing right side translation.
ERROR: language file line 'buck power { This is the power of curvature of the low-drag laminar flow bucket... 2.0 might be good guess.====' missing right side translation.
ERROR: language file line 'cm -20 { This is the coefficient of pitching moment at -20 degrees angle of attack. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation.
ERROR: language file line 'cm alpha 1 { This is the coefficient of pitching moment at the pitch-moment change entered above. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation.
ERROR: language file line 'cm alpha 2 { This is the coefficient of pitching moment at the pitch-moment change entered above. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation.
ERROR: language file line 'cm 20 { This is the coefficient of pitching moment at  20 degrees angle of attack. The pitch moment is an indication of how much the airfoil tends to twist UP. Since airfoils almost always pitch DOWN, this number is almost always negative.====' missing right side translation.
ERROR: language file line 'AR|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'e|to use for L/D estimation at right and below====' missing right side translation.
ERROR: language file line 'Dataref-Out====' missing right side translation.
ERROR: language file line '{ This data will go to an IP address. See the Net Conenctions screen, Data tab to set the IP address!====' missing right side translation.
ERROR: language file line 'time zoom { This is how much to zoom in on the data.====' missing right side translation.
ERROR: language file line 'value zoom { This is how much to zoom in on the data.====' missing right side translation.
ERROR: language file line 'Select Datarefs====' missing right side translation.
ERROR: language file line 'Serial Port Specs====' missing right side translation.
ERROR: language file line 'Datarefs to Read as $ + Comma-Separated Strings====' missing right side translation.
ERROR: language file line 'Datarefs to Write as $ + Comma-Separated Strings====' missing right side translation.
ERROR: language file line 'dataref:====' missing right side translation.
ERROR: language file line 'WRITE====' missing right side translation.
ERROR: language file line 'READ====' missing right side translation.
ERROR: language file line 'DELETE====' missing right side translation.
ERROR: language file line 'send these datarefs to the data-out IP address { This data will go to an IP address. See the Net Conenctions screen, Data tab to set the IP address!====' missing right side translation.
ERROR: language file line 'send these datarefs to a com port====' missing right side translation.
ERROR: language file line 'com-port====' missing right side translation.
ERROR: language file line 'Port #====' missing right side translation.
ERROR: language file line ' not opened yet: Dataref com-port output not yet turned on.====' missing right side translation.
ERROR: language file line 'Write: Cannot open port #====' missing right side translation.
ERROR: language file line 'Read: Cannot open port #====' missing right side translation.
ERROR: language file line ' can open. Sent ====' missing right side translation.
ERROR: language file line ' bytes so far.====' missing right side translation.
ERROR: language file line ' can open. Got ====' missing right side translation.
ERROR: language file line 'frame rate |f-act  /sec f-sim  /sec             frame  time   cpu  time  gpu  time   grnd ratio  flit ratio====' missing right side translation.
ERROR: language file line 'times | real  time  totl  time missn  time timer  time              zulu  time local  time hobbs  time====' missing right side translation.
ERROR: language file line 'sim stats |explo   DIM explo   USE cratr   DIM cratr   USE puffs   TOT puffs   VIS  tris   vis     q depth====' missing right side translation.
ERROR: language file line 'speeds | Vind  kias  Vind  keas Vtrue  ktas Vtrue  ktgs              Vind   mph Vtrue mphas Vtrue mphgs====' missing right side translation.
ERROR: language file line 'Mach, VVI, G-load | Mach ratio               VVI   fpm             Gload norml Gload axial Gload  side            ====' missing right side translation.
ERROR: language file line 'atmosphere: weather |SLprs  inHG SLtmp  degC              wind speed  wind   dir   trb  locl  prec  locl  hail  locl====' missing right side translation.
ERROR: language file line 'atmosphere: aircraft |AMprs  inHG AMtmp  degC LEtmp  degC  dens ratio     A  ktas     Q   psf             gravi  fts2====' missing right side translation.
ERROR: language file line 'system pressures |baro   inHG edens  part vacum ratio vacum ratio  elec ratio  elec ratio  AHRS ratio  AHRS ratio====' missing right side translation.
ERROR: language file line 'joystick ail/elv/rud | elev yoke1 ailrn yoke1 ruddr yoke1                                                            ====' missing right side translation.
ERROR: language file line 'other flight controls| vect  rqst sweep  rqst incid  rqst dihed  rqst retra  rqst                         water jetts====' missing right side translation.
ERROR: language file line 'trim/flap/slat/s-brakes | trim  elev  trim ailrn  trim ruddr  flap handl  flap postn  slat ratio sbrak handl sbrak postn====' missing right side translation.
ERROR: language file line 'gear/brakes | gear   0/1 wbrak  part lbrak   add rbrak   add                                                ====' missing right side translation.
ERROR: language file line 'angular moments            |    M  ftlb     L  ftlb     N  ftlb                                                            ====' missing right side translation.
ERROR: language file line 'AoA, side-slip, paths|alpha   deg  beta   deg hpath   deg vpath   deg                                      slip   deg====' missing right side translation.
ERROR: language file line 'lat, lon, altitude|  lat   deg   lon   deg   alt ftmsl   alt ftagl    on runwy   alt   ind   lat south   lon  west====' missing right side translation.
ERROR: language file line 'loc, vel, dist traveled|    X     m     Y     m     Z     m    vX   m/s    vY   m/s    vZ   m/s  dist    ft  dist    nm====' missing right side translation.
ERROR: language file line 'all planes: lat|lat 1   deg lat 2   deg lat 3   deg lat 4   deg lat 5   deg lat 6   deg lat 7   deg lat 8   deg====' missing right side translation.
ERROR: language file line 'all planes: lon|lon 1   deg lon 2   deg lon 3   deg lon 4   deg lon 5   deg lon 6   deg lon 7   deg lon 8   deg====' missing right side translation.
ERROR: language file line 'all planes: alt|alt 1 ftmsl alt 2 ftmsl alt 3 ftmsl alt 4 ftmsl alt 5 ftmsl alt 6 ftmsl alt 7 ftmsl alt 8 ftmsl====' missing right side translation.
ERROR: language file line 'throttle command|thro1  part thro2  part thro3  part thro4  part thro5  part thro6  part thro7  part thro8  part====' missing right side translation.
ERROR: language file line 'throttle actual|thro1  part thro2  part thro3  part thro4  part thro5  part thro6  part thro7  part thro8  part====' missing right side translation.
ERROR: language file line 'carb heat setting    |heat1 ratio heat2 ratio heat3 ratio heat4 ratio heat5 ratio heat6 ratio heat7 ratio heat8 ratio====' missing right side translation.
ERROR: language file line 'cowl flap setting    |cowl1   set cowl2   set cowl3   set cowl4   set cowl5   set cowl6   set cowl7   set cowl8   set====' missing right side translation.
ERROR: language file line 'engine thrust        |thrst  1,lb thrst  2,lb thrst  3,lb thrst  4,lb thrst  5,lb thrst  6,lb thrst  7,lb thrst  8,lb====' missing right side translation.
ERROR: language file line 'engine torque        |trq 1  ftlb trq 2  ftlb trq 3  ftlb trq 4  ftlb trq 5  ftlb trq 6  ftlb trq 7  ftlb trq 8  ftlb====' missing right side translation.
ERROR: language file line 'engine RPM            |rpm 1 engin rpm 2 engin rpm 3 engin rpm 4 engin rpm 5 engin rpm 6 engin rpm 7 engin rpm 8 engin====' missing right side translation.
ERROR: language file line 'prop pitch            |ptch1   deg ptch2   deg ptch3   deg ptch4   deg ptch5   deg ptch6   deg ptch7   deg ptch8   deg====' missing right side translation.
ERROR: language file line 'N1                    |N1  1  pcnt N1  2  pcnt N1  3  pcnt N1  4  pcnt N1  5  pcnt N1  6  pcnt N1  7  pcnt N1  8  pcnt====' missing right side translation.
ERROR: language file line 'N2                    |N2  1  pcnt N2  2  pcnt N2  3  pcnt N2  4  pcnt N2  5  pcnt N2  6  pcnt N2  7  pcnt N2  8  pcnt====' missing right side translation.
ERROR: language file line 'MP                    |MP  1  inhg MP  2  inhg MP  3  inhg MP  4  inhg MP  5  inhg MP  6  inhg MP  7  inhg MP  8  inhg====' missing right side translation.
ERROR: language file line 'FF                    |FF  1  lb/h FF  2  lb/h FF  3  lb/h FF  4  lb/h FF  5  lb/h FF  6  lb/h FF  7  lb/h FF  8  lb/h====' missing right side translation.
ERROR: language file line 'fuel pressure        |FUEP1   psi FUEP2   psi FUEP3   psi FUEP4   psi FUEP5   psi FUEP6   psi FUEP7   psi FUEP8   psi====' missing right side translation.
ERROR: language file line 'generator amperage    |genr1   amp genr2   amp genr3   amp genr4   amp genr5   amp genr6   amp genr7   amp genr8   amp====' missing right side translation.
ERROR: language file line 'elec fuel pump on/off|pump1   0/1 pump2   0/1 pump3   0/1 pump4   0/1 pump5   0/1 pump6   0/1 pump7   0/1 pump8   0/1====' missing right side translation.
ERROR: language file line 'battery on/off        |batt1   0/1 batt2   0/1 batt3   0/1 batt4   0/1 batt5   0/1 batt6   0/1 batt7   0/1 batt8   0/1====' missing right side translation.
ERROR: language file line 'igniter on/off        |igni1   0/1 igni2   0/1 igni3   0/1 igni4   0/1 igni5   0/1 igni6   0/1 igni7   0/1 igni8   0/1====' missing right side translation.
ERROR: language file line 'payload weights and CG|empty    lb payld    lb  fuel totlb jetti    lb curnt    lb maxim    lb                cg ftref====' missing right side translation.
ERROR: language file line 'aero forces            | lift    lb  drag    lb  side    lb                                                            ====' missing right side translation.
ERROR: language file line 'landing gear vert force| gear    lb  gear    lb  gear    lb  gear    lb  gear    lb  gear    lb   gear   lb  gear    lb====' missing right side translation.
ERROR: language file line 'landing gear deployment| gear   rat  gear   rat  gear   rat  gear   rat  gear   rat  gear   rat   gear  rat  gear   rat====' missing right side translation.
ERROR: language file line 'defs: ailerons 1            |Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg Lailn 1,deg Railn 1,deg====' missing right side translation.
ERROR: language file line 'defs: ailerons 2            |Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg Lailn 2,deg Railn 2,deg====' missing right side translation.
ERROR: language file line 'defs: yaw-brakes            |Lyawb   deg Ryawb   deg Lyawb   deg Ryawb   deg Lyawb   deg Ryawb   deg Lyawb   deg Ryawb   deg====' missing right side translation.
ERROR: language file line 'roll cyclic flapping        | roll  flap  roll  flap  roll  flap  roll  flap  roll  flap  roll  flap  roll  flap  roll  flap====' missing right side translation.
ERROR: language file line 'COM 1/2 frequency|COM 1  freq COM 1  stby             COM 2  freq COM 2  stby               COM   xmt            ====' missing right side translation.
ERROR: language file line 'NAV 1/2 frequency|NAV 1  freq NAV 1  stby NAV 1  type             NAV 2  freq NAV 2  stby NAV 2  type            ====' missing right side translation.
ERROR: language file line 'NAV 1/2 OBS|NAV 1   OBS NAV 1 s-crs NAV 1  flag             NAV 2   OBS NAV 2 s-crs NAV 2  flag            ====' missing right side translation.
ERROR: language file line 'NAV 1 deflections|NAV 1 n-typ NAV 1 to-fr NAV 1 m-crs NAV 1 r-brg NAV 1 dme-d NAV 1 h-def NAV 1 v-def                  ====' missing right side translation.
ERROR: language file line 'NAV 2 deflections|NAV 2 n-typ NAV 2 to-fr NAV 2 m-crs NAV 2 r-brg NAV 2 dme-d NAV 2 h-def NAV 2 v-def                  ====' missing right side translation.
ERROR: language file line 'ADF 1/2 status|ADF 1  freq ADF 1  card ADF 1 r-brg ADF 1 n-typ ADF 2  freq ADF 2  card ADF 2 r-brg ADF 2 n-typ====' missing right side translation.
ERROR: language file line 'DME status|  DME nav01   DME  mode   DME found   DME  dist   DME speed   DME  time   DME n-typ DME-3  freq====' missing right side translation.
ERROR: language file line 'GPS status|  GPS  mode   GPS index  dist    nm   OBS   mag   crs   mag   rel  brng  hdef  dots  vdef  dots====' missing right side translation.
ERROR: language file line 'XPNDR status|trans  mode trans  sett trans    ID trans inter                                                ====' missing right side translation.
ERROR: language file line 'MARKER status|   OM morse    MM morse    IM morse audio activ                                                ====' missing right side translation.
ERROR: language file line 'switches 1:electrical| avio   0/1   nav  lite beacn  lite strob  lite  land  lite  taxi  lite                        ====' missing right side translation.
ERROR: language file line 'switches 2:EFIS| ECAM  mode  EFIS sel 1  EFIS sel 2   HSI sel 1   HSI sel 2   HSI   arc   map r-sel   map range====' missing right side translation.
ERROR: language file line 'switches 3:AP/f-dir/HUD|   ap   src  fdir  mode  fdir  ptch  fdir  roll               HUD power   HUD brite            ====' missing right side translation.
ERROR: language file line 'switches 4:anti-ice|deice   all deice inlet deice  prop deice windo deice pito1 deice pito2 deice   AOA deice  wing====' missing right side translation.
ERROR: language file line 'switches 6:clutch/astab|prero engag prero engag clutc ratio clutc ratio   art  ptch   art  roll   yaw  damp  auto brake====' missing right side translation.
ERROR: language file line 'switches 7:misc|  tot energ radal  feet  prop  sync fethr  mode puffr power water scoop arrst  hook chute deply====' missing right side translation.
ERROR: language file line 'annunciators: general|yawda    on  sbrk    on  GPWS  warn   ice  warn pitot   off cabin althi afthr   arm  ospd  time====' missing right side translation.
ERROR: language file line 'annunciators: engine| fuel press   oil press   oil  temp inver  warn gener  warn  chip detec engin  fire ignit   0/1====' missing right side translation.
ERROR: language file line 'autopilot arms|  nav   arm   alt   arm   app   arm  vnav  enabl vnav   arm  vnav  time    gp enabl   app   typ====' missing right side translation.
ERROR: language file line 'autopilot modes| auto throt  mode hding  mode   alt               bac   0/1   app             butn  sync  butn====' missing right side translation.
ERROR: language file line 'autopilot values|  set speed   set hding   set   vvi  dial   alt  vnav   alt   use   alt  sync  roll  sync pitch====' missing right side translation.
ERROR: language file line 'weapon status| hdng delta  ptch delta     R d/sec     Q d/sec  rudd ratio  elev ratio     V   kts   dis    ft====' missing right side translation.
ERROR: language file line 'pressurization status|  alt   set   vvi   set   alt cabin   vvi cabin  test  time  diff   psi  dump   all bleed   src====' missing right side translation.
ERROR: language file line 'APU/GPU status|  APU eqipd               APU swtch   APU runng   APU    N1   APU genrt               GPU power====' missing right side translation.
ERROR: language file line 'radar status| targ selct                                                                                     ====' missing right side translation.
ERROR: language file line 'hydraulic status| hydr pump1  hydr pump2  hydr pump1  hydr pump2  hydr  qty1  hydr  qty2  hydr pres1  hydr pres2====' missing right side translation.
ERROR: language file line 'elec & solar status| bus1   amp  bus2   amp  bus1  volt  bus2  volt engin  in W solar out W  batt  w-hr cross   tie====' missing right side translation.
ERROR: language file line 'icing status 1|inlet   ice inlet   ice  prop   ice  prop   ice pitot   ice pitot   ice statc   ice statc   ice====' missing right side translation.
ERROR: language file line 'icing status 2|  aoa   ice   aoa   ice lwing   ice rwing   ice windo   ice                                     ====' missing right side translation.
ERROR: language file line 'warning status| warn  time  caut  time  warn  work  caut  work  gear  work  gear  warn stall  warn            ====' missing right side translation.
ERROR: language file line 'flite-plan legs|  leg     #   leg  type   leg   lat   leg   lon                                                ====' missing right side translation.
ERROR: language file line 'hardware options|pedal nobrk pedal wibrk  yoke   PFC pedal   PFC throt   PFC cecon   PFC switc   PFC btogg   PFC====' missing right side translation.
ERROR: language file line 'camera location|camra   lon camra   lat camra   ele camra  hdng camra pitch camra  roll             camra  clou====' missing right side translation.
ERROR: language file line 'ground location| cntr     X  cntr     Y  cntr     Z slope     X slope     Z                                    ====' missing right side translation.
ERROR: language file line 'cruise stats |solar __eta solar kW_in engin __eta engin kW_in _batt kW_in _batt _kW-h endur hours range ___nm====' missing right side translation.
ERROR: language file line 'prop efficiency        |Peff1 ratio Peff2 ratio Peff3 ratio Peff4 ratio Peff5 ratio Peff6 ratio Peff7 ratio Peff8 ratio====' missing right side translation.
ERROR: language file line 'defs: elevators        |elev1   deg elev1   deg elev2   deg elev2   deg                                                ====' missing right side translation.
ERROR: language file line 'TOTAL vert thrust vects|vert1 tvect vert2 tvect vert3 tvect vert4 tvect vert5 tvect vert6 tvect vert7 tvect vert8 tvect====' missing right side translation.
ERROR: language file line 'TOTAL lat  thrust vects|latr1 tvect latr2 tvect latr3 tvect latr4 tvect latr5 tvect latr6 tvect latr7 tvect latr8 tvect====' missing right side translation.
ERROR: language file line 'pitch cyclic disc tilts|pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli pitch cycli====' missing right side translation.
ERROR: language file line 'grnd effect lift, wings|wing1 L cl* wing1 R cl* wing2 L cl* wing2 R cl* wing3 L cl* wing3 R cl* wing4 L cl* wing4 R cl*====' missing right side translation.
ERROR: language file line 'grnd effect drag, wings|wing1 Lcdi* wing1 Rcdi* wing2 Lcdi* wing2 Rcdi* wing3 Lcdi* wing3 Rcdi* wing4 Lcdi* wing4 Rcdi*====' missing right side translation.
ERROR: language file line 'grnd effect wash, wings|wing1 wash* wing1 wash* wing2 wash* wing2 wash* wing3 wash* wing3 wash* wing4 wash* wing4 wash*====' missing right side translation.
ERROR: language file line 'grnd effect lift, stabs|hstab L cl* hstab R cl* vstb1   cl* vstb2   cl*                                                ====' missing right side translation.
ERROR: language file line 'grnd effect drag, stabs|hstab Lcdi* hstab Rcdi* vstb1  cdi* vstb2  cdi*                                                ====' missing right side translation.
ERROR: language file line 'grnd effect wash, stabs|hstab wash* hstab wash* vstb1 wash* vstb2 wash*                                                ====' missing right side translation.
ERROR: language file line 'grnd effect lift, props|prop1   cl* prop2   cl* prop3   cl* prop4   cl* prop5   cl* prop6   cl* prop7   cl* prop8   cl*====' missing right side translation.
ERROR: language file line 'grnd effect drag, props|prop1  cdi* prop2  cdi* prop3  cdi* prop4  cdi* prop5  cdi* prop6  cdi* prop7  cdi* prop8  cdi*====' missing right side translation.
ERROR: language file line 'pressurization status|  alt   set   vvi   set   alt   act   vvi   act  test  time  diff   psi  dump   all bleed   src====' missing right side translation.
ERROR: language file line 'warning status| warn  time  caut  time  warn  work  caut  work  gear  work  gear  warn stall  warn   VRS ratio====' missing right side translation.
ERROR: language file line 'Extern Visual====' missing right side translation.
ERROR: language file line 'Hook this machine up to another with an ethernet cable. This is an extra cockpit, visual, map, viewpoint, or anything else! It must be connected to a master machine, which has one of the entries in the above table checked. If the views in this machine track the views on the master, use the offsets in the Rendering Options to align the view relative to the master as desired.====' missing right side translation.
ERROR: language file line 'Hook this machine up to another with an ethernet cable. This will be the machine with the controls and flight model (master machine) and the other will be an extra monitor for more scenery or another cockpit instrument screen or anything else that tracks the master copy of X-Plane! The external view can either be independently controlled on the other machine or track the master machine's view.====' missing right side translation.
ERROR: language file line 'average SNAP rate====' missing right side translation.
ERROR: language file line 'Discontinued iPhone and iPad Apps====' missing right side translation.
ERROR: language file line 'Control Pad IOS for iPhone or iPad!====' missing right side translation.
ERROR: language file line 'Xavion, ForeFlight, FlyQ, WingX Pro, or SkyDemon for iPad or iPhone====' missing right side translation.
ERROR: language file line 'Download Xavion, ForeFlight, FlyQ, WingX Pro, or SkyDemon from the Apple App Store.====' missing right side translation.
ERROR: language file line 'Get your iPad, iPhone, or iPod touch on the same local network as this computer.====' missing right side translation.
ERROR: language file line 'Then check the box below to have X-Plane drive the App.====' missing right side translation.
ERROR: language file line 'Then, as you fly X-Plane, these Apps will respond as if they were in a real cockpit! Cool!====' missing right side translation.
ERROR: language file line 'port that we send from | 49001 is the default====' missing right side translation.
ERROR: language file line 'port that we send to iPad from | 49002 is the default====' missing right side translation.
ERROR: language file line 'Sending to ====' missing right side translation.
ERROR: language file line 'a multiplayer to plane #====einem(r) Mitspieler(in), Flugzeug Nr. ' does not have the same trailing spaces.
ERROR: language file line ' an external monitor====' missing right side translation.
ERROR: language file line ' a master machine, is external view====' missing right side translation.
ERROR: language file line ' a master machine, is external IOS====' missing right side translation.
ERROR: language file line ' a single-student IOS====' missing right side translation.
ERROR: language file line ' a multi-student IOS====' missing right side translation.
ERROR: language file line ' data output====' missing right side translation.
ERROR: language file line ' FLIR imagery receiver====' missing right side translation.
ERROR: language file line ' an iPhone running X-Plane Remote====' missing right side translation.
ERROR: language file line ' an iPad running EFIS-App====' missing right side translation.
ERROR: language file line ' a device running Xavion====' missing right side translation.
ERROR: language file line ' a device running Xavion, ForeFlight, WingX Pro, SkyDemon, or FlyQ====' missing right side translation.
ERROR: language file line ' a device running Control Pad====' missing right side translation.
ERROR: language file line ' at IP address ====' missing right side translation.
ERROR: language file line ' seconds ago, ====' missing right side translation.
ERROR: language file line 'someone talking to a master machine, is position output machine====' missing right side translation.
ERROR: language file line 'someone talking to an iPhone running X-Plane Remote====' missing right side translation.
ERROR: language file line 'someone talking to a device running Xavion, ForeFlight, WingX Pro, SkyDemon, or FlyQ====' missing right side translation.
ERROR: language file line 'someone talking to a device running Control Pad====' missing right side translation.
ERROR: language file line 'someone talking to a device running Xavion====' missing right side translation.
ERROR: language file line 'You asked to send FLIR but I sent none.====' missing right side translation.
ERROR: language file line '|-IP of extra visual====' missing right side translation.
ERROR: language file line '|-send AHRS and ADS-B data to Xavion or FlyQ for iPad or iPhone====' missing right side translation.
ERROR: language file line '|-send AHRS data to ForeFlight, WingX Pro, or SkyDemon on ONE iPad or iPhone====' missing right side translation.
ERROR: language file line '|-send AHRS data to ForeFlight, WingX Pro, or SkyDemon on ALL iPads or iPhones====' missing right side translation.
ERROR: language file line '|-send data to X-Plane Control Pad for iPad and iPhone, at the AppStore now.====' missing right side translation.
ERROR: language file line '|-(discontinued App) send data to X-Plane Remote, to use your iPhone as a joystick====' missing right side translation.
ERROR: language file line '|-(discontinued App) send data to EFIS-App (also enter this ip and port into Data Output line in the Data tab)====' missing right side translation.
ERROR: language file line '|-IP of data receiver (for Data Input & Output screen: Data-Set and Dataref-Out tabs)====' missing right side translation.
ERROR: language file line '|-View tracks master{ Turn this on to have the remote view follow the master. Turn it off to have the remote view controlled independently.====' missing right side translation.
ERROR: language file line 'Continue====' missing right side translation.
ERROR: language file line 'Click on the world map to select the scenery you would like to install. Scenery that you deselect will be removed; scenery that you select will be installed.  If you fly into an area with no scenery installed, you will see only ocean.====' missing right side translation.
ERROR: language file line 'CANCEL INSTALLATION IN PROGRESS?====' missing right side translation.
ERROR: language file line 'LONG INSTALLATION TIME EXPECTED====' missing right side translation.
ERROR: language file line 'You agree to use X-Plane for non-commercial purposes only. (See X-Plane.com/pro/ for information on professional licenses.)====' missing right side translation.
ERROR: language file line 'You agree to not make copies of X-Plane.====' missing right side translation.
ERROR: language file line 'You agree to not distribute the artwork from X-Plane, or any derivative thereof, without permission from Laminar Research.====' missing right side translation.
ERROR: language file line 'I agree to the terms of the EULA====' missing right side translation.
ERROR: language file line 'Send diagnostic and usage data to Laminar Research====' missing right side translation.
ERROR: language file line 'Installation Name====' missing right side translation.
ERROR: language file line '(The folder %1:install name% will appear on your desktop.)====' missing right side translation.
ERROR: language file line 'You have more than one copy of X-Plane 10 installed on this computer.====' missing right side translation.
ERROR: language file line 'Is the copy of X-Plane 10 you’re looking for missing from this list?====' missing right side translation.
ERROR: language file line 'Contact Support====' missing right side translation.
ERROR: language file line 'Select All====' missing right side translation.
ERROR: language file line 'Select None====' missing right side translation.
ERROR: language file line 'You have more than one copy of X-Plane 10 installed on this computer.  ====Auf diesem Computer haben Sie mehr als eine Kopie von X-Plane 10 installiert.' does not have the same trailing spaces.
ERROR: language file line 'the update.====' missing right side translation.
ERROR: language file line 'the update process.====' missing right side translation.
ERROR: language file line 'the installation and delete partial installation.====' missing right side translation.
ERROR: language file line 'the installation process.====' missing right side translation.
ERROR: language file line 'Click on the world map to select the scenery you would like to install.  You can use this installer to add or remove scenery later.  If you fly into an area with no scenery installed, you will see only ocean.====' missing right side translation.
ERROR: language file line 'You do not have enough free disk space to install X-Plane 10 with the selected scenery; change the install location to another hard drive or select less scenery.====' missing right side translation.
ERROR: language file line 'Open the installer options====' missing right side translation.
ERROR: language file line 'Cancel Installation====' missing right side translation.
ERROR: language file line 'Buy X-Plane Online====' missing right side translation.
ERROR: language file line 'Back====' missing right side translation.
ERROR: language file line 'Quit====' missing right side translation.
ERROR: language file line 'INSTALLER SETTINGS====' missing right side translation.
ERROR: language file line 'Done====' missing right side translation.
ERROR: language file line 'Operating system to download X-Plane for====' missing right side translation.
ERROR: language file line 'This can be useful if you want to install X-Plane on this computer and copy the entire X-Plane folder to another computer (maybe one without a disc drive or internet access).====' missing right side translation.
ERROR: language file line 'Restart the installer to apply changes.====' missing right side translation.
ERROR: language file line 'Network proxy host====' missing right side translation.
ERROR: language file line 'Windows====' missing right side translation.
ERROR: language file line 'macOS====' missing right side translation.
ERROR: language file line 'Linux====' missing right side translation.
ERROR: language file line 'Check for new betas as well as updates====' missing right side translation.
ERROR: language file line 'Leave this off unless you understand the risks of using X-Plane betas!====' missing right side translation.
ERROR: language file line 'I will take you to the web page where you can downoad it.====' missing right side translation.
ERROR: language file line '[ Download Now ]====' missing right side translation.
ERROR: language file line 'Error: ====Fehler:' does not have the same trailing spaces.
ERROR: language file line 'Install Location: ====Installationsort:' does not have the same trailing spaces.
ERROR: language file line 'The installer is about to delete the file:====' missing right side translation.
ERROR: language file line 'because we no longer use this file, but it appears you have modified it.====' missing right side translation.
ERROR: language file line 'Delete the Old File====' missing right side translation.
ERROR: language file line 'The installer is about to install the file:====' missing right side translation.
ERROR: language file line 'but it appears you have modified this file.====' missing right side translation.
ERROR: language file line 'Overwrite the Old File====' missing right side translation.
ERROR: language file line 'FILE CHANGES DETECTED====' missing right side translation.
ERROR: language file line 'Keep the Old File====' missing right side translation.
ERROR: language file line 'Cancel the Installation====' missing right side translation.
ERROR: language file line 'Do this for all files in this directory====' missing right side translation.
ERROR: language file line 'What would you like to do?====' missing right side translation.
ERROR: language file line 'Compressed File: ====Komprimierte Datei:' does not have the same trailing spaces.
ERROR: language file line 'Destination: ====Ziel:' does not have the same trailing spaces.
ERROR: language file line 'bouncer|# { Enter bouncers in Plane-Maker to have datarefs that bounce in flight. Maps, old instruments, stuff lying around the cockpit, etc.====' missing right side translation.
ERROR: language file line 'NO GUIDED WEAPONS BURNING====' missing right side translation.
ERROR: language file line 'Ren Opts====' missing right side translation.
ERROR: language file line 'Grid Adjust====' missing right side translation.
ERROR: language file line 'Edge Blend====' missing right side translation.
ERROR: language file line '|-Cylinder Projection { If you check this box, then the projection will be onto a cylinder rather than a flat plane, as is the OpenGl standard projection. This is commonly used for PROJECTORS, and means that the surface you are projecting on to is curved in a cylinder around the user from left to right, rather than flat, keeping a constant distance from the projector lense.====' missing right side translation.
ERROR: language file line 'lateral offset|(screen ratio) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation.
ERROR: language file line 'Dome test pattern | Draw a 3-D test pattern for Dome projection.====' missing right side translation.
ERROR: language file line 'Projector Grid Test Pattern | Drag the red nodes with the mouse to adjust the grid as desired! (Drag this window to get to nodes as needed)====' missing right side translation.
ERROR: language file line 'Projector Grid Use In Flight | Now the image will be distorted to match any offsets you enter into the test grid.====' missing right side translation.
ERROR: language file line 'grid steps|x-direction====' missing right side translation.
ERROR: language file line 'grid steps|y-direction====' missing right side translation.
ERROR: language file line 'RESET ALL GRID OFFSETS TO DEFAULT====' missing right side translation.
ERROR: language file line 'Edge-Blend | Turn this on to do edge-blending!====' missing right side translation.
ERROR: language file line '|edge width { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation.
ERROR: language file line '|edge extra width { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation.
ERROR: language file line 'edge width| { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation.
ERROR: language file line 'edge extra width| { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation.
ERROR: language file line ' | { This fades the image to black near the edge of the screen. This is useful to blend images from multiple projectors onto one big surface.====' missing right side translation.
ERROR: language file line 'mount:====' missing right side translation.
ERROR: language file line 'clean:====' missing right side translation.
ERROR: language file line 'hazy :====' missing right side translation.
ERROR: language file line 'foggy:====' missing right side translation.
ERROR: language file line 'sockd:====' missing right side translation.
ERROR: language file line 'strat:====' missing right side translation.
ERROR: language file line 'ocast:====' missing right side translation.
ERROR: language file line 'snowy:====' missing right side translation.
ERROR: language file line 'hialt:====' missing right side translation.
ERROR: language file line 'orbit:====' missing right side translation.
ERROR: language file line 'fog, water color====' missing right side translation.
ERROR: language file line 'cloud light, dark====' missing right side translation.
ERROR: language file line 'light glare (sun/moon)====' missing right side translation.
ERROR: language file line 'light dir (sun/moon)====' missing right side translation.
ERROR: language file line 'light amb (sun/moon)====' missing right side translation.
ERROR: language file line '|-near fog, km====' missing right side translation.
ERROR: language file line '|-far fog, km====' missing right side translation.
ERROR: language file line '|-near fog lit, km====' missing right side translation.
ERROR: language file line '|-far fog lit, km====' missing right side translation.
ERROR: language file line '|-near dis clip, km====' missing right side translation.
ERROR: language file line '|-far dis clip, km====' missing right side translation.
ERROR: language file line '|-# puffs====' missing right side translation.
ERROR: language file line '|-%====' missing right side translation.
ERROR: language file line 'cloud|-%====' missing right side translation.
ERROR: language file line 're-load all cloud colors====' missing right side translation.
ERROR: language file line 'Special====' missing right side translation.
ERROR: language file line 'Airfoil====' missing right side translation.
ERROR: language file line 'Weapon====' missing right side translation.
ERROR: language file line 'Object====' missing right side translation.
ERROR: language file line 'Wave====' missing right side translation.
ERROR: language file line 'FMS====' missing right side translation.
ERROR: language file line 'Flight Data====' missing right side translation.
ERROR: language file line 'Log Book====' missing right side translation.
ERROR: language file line 'Bitmap====' missing right side translation.
ERROR: language file line 'Particle System====' missing right side translation.
ERROR: language file line 'Interaction====' missing right side translation.
ERROR: language file line 'Change Livery and Keep Flying====' missing right side translation.
ERROR: language file line 'Re-Scan====' missing right side translation.
ERROR: language file line 'Save ====' missing right side translation.
ERROR: language file line '|-aircraft has this external fuel tank or external body====' missing right side translation.
ERROR: language file line 'long arm|(--) { fuel tank, float, or other external body====' missing right side translation.
ERROR: language file line 'lat arm|(--) { fuel tank, float, or other external body====' missing right side translation.
ERROR: language file line 'vert arm|(--) { fuel tank, float, or other external body====' missing right side translation.
ERROR: language file line 'ELLIPSE====' missing right side translation.
ERROR: language file line 'Enter the arm and maximum weight of the passengers and cargo that you expect to carry here.====' missing right side translation.
ERROR: language file line 'Then go to the next tab over to see the range of weight and balance you could encounter in flight!====' missing right side translation.
ERROR: language file line 'NOTE: THIS IS ONLY FOR WEIGHT AND BALANCE INVESTIGATION FOR YOU, AND DOES NOT AFFECT X-PLANE IN ANY WAY!====' missing right side translation.
ERROR: language file line 'Each red dot is a possible loading configuration. See here what range of weight and CG you could see in flight!====' missing right side translation.
ERROR: language file line 'Enter weights below to see the weight and CG for that load.====' missing right side translation.
ERROR: language file line 'cg|-at current test====' missing right side translation.
ERROR: language file line 'weight|-at current test====' missing right side translation.
ERROR: language file line 'fwd limit====' missing right side translation.
ERROR: language file line '|aft limit====' missing right side translation.
ERROR: language file line 'wgt min====' missing right side translation.
ERROR: language file line '|wgt max====' missing right side translation.
ERROR: language file line 'You installed two incompatible GPS/FMS systems on the copilot side. You probably meant to install one for the pilot and one for the copilot.\n====' missing right side translation.
ERROR: language file line 'You installed two incompatible GPS/FMS systems on the pilot side. You probably meant to install one for the pilot and one for the copilot.\n====' missing right side translation.
ERROR: language file line 'This clipped animating group is not correctly horizontally aligned.\n====' missing right side translation.
ERROR: language file line 'This clipped animating group is not correctly vertically aligned.\n====' missing right side translation.
ERROR: language file line 'You cannot use group clipping inside another group animation.\n====' missing right side translation.
ERROR: language file line 'Image====' missing right side translation.
ERROR: language file line 'Close the panel editor.====' missing right side translation.
ERROR: language file line 'Select all instruments that use this dataref.====' missing right side translation.
ERROR: language file line 'Visualization====' missing right side translation.
ERROR: language file line 'Objects====' missing right side translation.
ERROR: language file line 'Cockpit Object====' missing right side translation.
ERROR: language file line 'Weapons====' missing right side translation.
ERROR: language file line 'Light %1:number%====' missing right side translation.
ERROR: language file line 'arms { Z center of the speedbrake hinge (positive aft)====' missing right side translation.
ERROR: language file line '{ X center of the speedbrake hinge (positive right)====' missing right side translation.
ERROR: language file line '|(--) { Y center of the speedbrake hinge (positive up)====' missing right side translation.
ERROR: language file line '|direction of extension { This is the direction in which the speedbrake extends. A zero angle extends the speedbrake upwards, -90 to the left, +90 to the right, and 180 down.====' missing right side translation.
ERROR: language file line 'retracted angle, degrees { This is the angle, relative to straight back, of the speedbrake when retracted. Adjust this angle so the speedbrake door is flush with the fuselage - this is the zero drag reference angle for the flight model.====' missing right side translation.
ERROR: language file line '|extended angle, degrees { This is the angle, relative to straight back, of the speedbrake when extended. Use positive values for extension.====' missing right side translation.
ERROR: language file line '-steers with gear | { Check this to let the light steer with the landing gear steering!====' missing right side translation.
ERROR: language file line '-Leading edge offset====' missing right side translation.
ERROR: language file line '-Trailing edge offset====' missing right side translation.
ERROR: language file line '-aoa|====' missing right side translation.
ERROR: language file line '-Chord ratio====' missing right side translation.
ERROR: language file line '-Chord offset====' missing right side translation.
ERROR: language file line '-Rib chord====' missing right side translation.
ERROR: language file line '-Element MAC====' missing right side translation.
ERROR: language file line '-Element S====' missing right side translation.
ERROR: language file line 'Cockpit====' missing right side translation.
ERROR: language file line 'Interior Lights====' missing right side translation.
ERROR: language file line 'Exterior Lights====' missing right side translation.
ERROR: language file line 'Spoolup/Boost====' missing right side translation.
ERROR: language file line 'Nacelle 1====' missing right side translation.
ERROR: language file line 'Nacelle 2====' missing right side translation.
ERROR: language file line 'Nacelle 3====' missing right side translation.
ERROR: language file line 'Nacelle 4====' missing right side translation.
ERROR: language file line 'Nacelle 5====' missing right side translation.
ERROR: language file line 'Nacelle 6====' missing right side translation.
ERROR: language file line 'Nacelle 7====' missing right side translation.
ERROR: language file line 'Nacelle 8====' missing right side translation.
ERROR: language file line 'W-Fairing 1====' missing right side translation.
ERROR: language file line 'W-Fairing 2====' missing right side translation.
ERROR: language file line 'W-Fairing 3====' missing right side translation.
ERROR: language file line 'W-Fairing 4====' missing right side translation.
ERROR: language file line 'W-Fairing 5====' missing right side translation.
ERROR: language file line 'W-Fairing 6====' missing right side translation.
ERROR: language file line 'W-Fairing 7====' missing right side translation.
ERROR: language file line 'W-Fairing 8====' missing right side translation.
ERROR: language file line 'W-Fairing 9====' missing right side translation.
ERROR: language file line 'W-Fairing 10====' missing right side translation.
ERROR: language file line 'Misc Wing 1====' missing right side translation.
ERROR: language file line 'Misc Wing 2====' missing right side translation.
ERROR: language file line 'Misc Wing 3====' missing right side translation.
ERROR: language file line 'Misc Wing 4====' missing right side translation.
ERROR: language file line 'Misc Wing 5====' missing right side translation.
ERROR: language file line 'Misc Wing 6====' missing right side translation.
ERROR: language file line 'Misc Wing 7====' missing right side translation.
ERROR: language file line 'Misc Wing 8====' missing right side translation.
ERROR: language file line 'Misc Wing 9====' missing right side translation.
ERROR: language file line 'Misc Wing 10====' missing right side translation.
ERROR: language file line 'Misc Wing 11====' missing right side translation.
ERROR: language file line 'Misc Wing 12====' missing right side translation.
ERROR: language file line 'Misc Wing 13====' missing right side translation.
ERROR: language file line 'Misc Wing 14====' missing right side translation.
ERROR: language file line 'Misc Wing 15====' missing right side translation.
ERROR: language file line 'Misc Wing 16====' missing right side translation.
ERROR: language file line 'Misc Wing 17====' missing right side translation.
ERROR: language file line 'Misc Wing 18====' missing right side translation.
ERROR: language file line 'Misc Wing 19====' missing right side translation.
ERROR: language file line 'Misc Wing 20====' missing right side translation.
ERROR: language file line 'Misc Body 1====' missing right side translation.
ERROR: language file line 'Misc Body 2====' missing right side translation.
ERROR: language file line 'Misc Body 3====' missing right side translation.
ERROR: language file line 'Misc Body 4====' missing right side translation.
ERROR: language file line 'Misc Body 5====' missing right side translation.
ERROR: language file line 'Misc Body 6====' missing right side translation.
ERROR: language file line 'Misc Body 7====' missing right side translation.
ERROR: language file line 'Misc Body 8====' missing right side translation.
ERROR: language file line 'Misc Body 9====' missing right side translation.
ERROR: language file line 'Misc Body 10====' missing right side translation.
ERROR: language file line 'Misc Body 11====' missing right side translation.
ERROR: language file line 'Misc Body 12====' missing right side translation.
ERROR: language file line 'Misc Body 13====' missing right side translation.
ERROR: language file line 'Misc Body 14====' missing right side translation.
ERROR: language file line 'Misc Body 15====' missing right side translation.
ERROR: language file line 'Misc Body 16====' missing right side translation.
ERROR: language file line 'Misc Body 17====' missing right side translation.
ERROR: language file line 'Misc Body 18====' missing right side translation.
ERROR: language file line 'Misc Body 19====' missing right side translation.
ERROR: language file line 'Misc Body 20====' missing right side translation.
ERROR: language file line 'Weight & Bal====' missing right side translation.
ERROR: language file line 'Tanks====' missing right side translation.
ERROR: language file line 'CG Set====' missing right side translation.
ERROR: language file line 'CG Check====' missing right side translation.
ERROR: language file line 'name for X-Plane UI { The name of the aircraft as it appears in the interface.====' missing right side translation.
ERROR: language file line 'tail number for ATC { This is the tail number of the aircraft.====' missing right side translation.
ERROR: language file line 'ICAO code for ATC====' missing right side translation.
ERROR: language file line 'aircraft author====' missing right side translation.
ERROR: language file line 'design studio====' missing right side translation.
ERROR: language file line 'aircraft description====' missing right side translation.
ERROR: language file line '|-Airliner { Check this box if the aircraft is an airliner. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-General Aviation { Check this box if the aircraft is a general aviation aircraft. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Glider { Check this box if the aircraft is a glider. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Experimental { Check this box if the aircraft is experimental. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Helicopter { Check this box if the aircraft is a helicopter. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Military { Check this box if the aircraft is a military aircraft. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Seaplane { Check this box if the aircraft is a seaplane. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Science Fiction { Check this box if the aircraft comes from science fiction. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-VTOL { Check this box if the aircraft is capable of vertical takeoffs & landings. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line '|-Ultralight { Check this box if the aircraft is an ultralight. This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line 'manufacturer { This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line 'specify manufacturer { This is for finding aircraft by classification in X-Plane.====' missing right side translation.
ERROR: language file line 'only airports on map { If your moving map does not show helipads and seaports, then check that here.====' missing right side translation.
ERROR: language file line '|only paved runways on map { If your moving map does not show airports with grass runways, then check that here.====' missing right side translation.
ERROR: language file line 'show exterior aircraft structure and props in:|2-d forward panel views { Set this to show the outside of your aircraft geometry in the forward 2-d panel view. Use this to see your aircraft wings or prop disc from the 2-d panel view.====' missing right side translation.
ERROR: language file line '|2-d no panel views { Set this to show the 3-d cockpit object when the user is in 2-d no panel views.====' missing right side translation.
ERROR: language file line '|2-d no panel views { Set this to draw the outside of your aircraft geometry in 2-d no panel views.====' missing right side translation.
ERROR: language file line 'show inside aircraft structure and props in:|2-d forward panel views { Set this to show the inside of your aircraft geometry in the forward 2-d panel view. Usually this is not needed.====' missing right side translation.
ERROR: language file line '|2-d no panel views { Set this to draw the inside of your aircraft geometry in 2-d no panel views.====' missing right side translation.
ERROR: language file line '# { For landing lights, this affects which index controls this light. For beacons and strobes, this controls its step in the flash sequence, if you use a plugin to create a custom flash sequence.====' missing right side translation.
ERROR: language file line 'length| { How far the light shines in meters====' missing right side translation.
ERROR: language file line '|width { The width of the light cone in degrees====' missing right side translation.
ERROR: language file line 'rgb { You can tint the spill cast by this light.  This is an RGB triplet from 0 to 1====' missing right side translation.
ERROR: language file line '|Hide { Hide this light.  If you have built your lights in your OBJs, check this to prevent Plane-Maker frmo drawing a second copy of the light.====' missing right side translation.
ERROR: language file line 'has winching hook to be towed { This is the hook you use to be towed by other craft, or to be winched.====' missing right side translation.
ERROR: language file line 'has towing hook to tow other craft { This is the hook you use to tow other craft!====' missing right side translation.
ERROR: language file line 'has boarding door 1====' missing right side translation.
ERROR: language file line 'has boarding door 2====' missing right side translation.
ERROR: language file line 'has fueling truck 1====' missing right side translation.
ERROR: language file line 'has fueling truck 2====' missing right side translation.
ERROR: language file line 'has food-truck 1====' missing right side translation.
ERROR: language file line 'has food-truck 2====' missing right side translation.
ERROR: language file line 'has baggage-truck 1====' missing right side translation.
ERROR: language file line 'has baggage-truck 2====' missing right side translation.
ERROR: language file line 'has baggage-truck 3====' missing right side translation.
ERROR: language file line 'has baggage-truck 4====' missing right side translation.
ERROR: language file line 'has crew-car 1====' missing right side translation.
ERROR: language file line 'has crew-car 2====' missing right side translation.
ERROR: language file line 'has ground power cart====' missing right side translation.
ERROR: language file line '|long, lat, vert arm (--)====' missing right side translation.
ERROR: language file line 'ang{ This is the angle of the lowest value we can display. You can wrap from 0 to 720 for 2 rotations, or 0 to NEGATIVE 360 to go backwards once, for example! Enter any angles you like, even negative ones, and even values well greater than 360. Zero is obviously the top of the instrument.====' missing right side translation.
ERROR: language file line 'critical altitude | (max altitude at which full power available at zero speed) { Engines generally put out less power at high altitude due to thinner air, but turbocharging can keep packing in air even at high altitudes. The critical altitude is the highest altitude at which the engine can still put out FULL POWER. This altitude can be above sea-level either by putting a turbocharger on a reciprocating engine or down-rating a jet or turboprop. Enter 0 for the critical altitude here if you are doing neither.====' missing right side translation.
ERROR: language file line '|FADEC automatically keeps engines from exceeding max allowable power or thrust { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation.
ERROR: language file line 'throttle available at max lever, one engine failed | (throttle) { This is the throttle that is available when an engine failure has occurred.====' missing right side translation.
ERROR: language file line 'throttle available at max lever, all engines running  | (throttle) { This is maximum throttle that the engine can be set to in X-Plane with all engines operative. ALL ENGINE SPECS (RPM, MANIFOLD PRESSURE, MAX EGT AND ITT, MAX POWER, EVERYTHING, ARE SET IN PLANE-MAKER FOR 100% POWER. GOING ABOVE 100% POWER WILL TAKE YOU ABOVE ALL THE MAX LIMITS THAT YOU ENTER HERE. (at sea-level, standard atmosphere)====' missing right side translation.
ERROR: language file line 'hi idle fuel adjustment ratio to default | (fuel ratio) { X-Plane picks good estimates for the engines to idle at. But you can adjust these numbers up or down a bit from 1.00 to adjust the idling speeds of the engines up or down in X-Plane.====' missing right side translation.
ERROR: language file line 'lo idle fuel adjustment ratio to default | (fuel ratio) { X-Plane picks good estimates for the engines to idle at. But you can adjust these numbers up or down a bit from 1.00 to adjust the idling speeds of the engines up or down in X-Plane.====' missing right side translation.
ERROR: language file line 'go to 50% afterburner above this throttle lever position { Full burner engages above 99% throttle, so simply enter 0.99 to go right to full buner at full throttle. ENTER ZERO HERE TO LET THE THE BURNER LEVEL PANEL-SWITCH CONTROL THE BURNER LEVEL.====' missing right side translation.
ERROR: language file line 'go to BETA PITCH below this throttle lever position { If the JOYSTICK throttle axis is dragged below this ratio, then the prop will go into beta.====' missing right side translation.
ERROR: language file line 'go to REVERSE below this throttle lever position { If the JOYSTICK throttle axis is dragged below this ratio, then the prop will go into reverse.====' missing right side translation.
ERROR: language file line 'throttle available at max reverse lever position | (throttle) { This is maximum throttle that the engine can be set to in X-Plane WHEN IN REVERSE. Go over 100% if you want to leave some reserve for emergency operations.====' missing right side translation.
ERROR: language file line '|beta available { beta is neither forward nor reverse thrust. It is simply putting the prop at zero degrees pitch, throttle at idle. Doing this provides some drag without working the engine. Some twins have it. Check here if your airplane does.====' missing right side translation.
ERROR: language file line '|reverse available { Prop or engine can reverse.====' missing right side translation.
ERROR: language file line 'maximum power|(hp) { This is the maximum horsepower output of the engine, obtained at sea level at standard temperature and density.====' missing right side translation.
ERROR: language file line 'RAM-inlet pressure recovery|(fraction) { This is the percentage of the RAM air pressure that your inlet manages to recover to increase engine power.====' missing right side translation.
ERROR: language file line 'feathered pitch of prop, blue knob pulled aft | (deg) { This is the pitch of the prop when feathered, if it is a featherable prop.====' missing right side translation.
ERROR: language file line 'coarse pitch of prop, governor in alpha mode | (deg) { This is the max pitch that the governor can see in normal (alpha) mode operation. Enter it in the next tab to the right.====' missing right side translation.
ERROR: language file line 'fine pitch of prop, governor in alpha mode | (deg) { This is the min pitch that the governor can see in normal (alpha) mode operation. Enter it in the next tab to the right.====' missing right side translation.
ERROR: language file line 'beta pitch of prop, black knob at idle | (deg) { This is the pitch of the prop when in beta, or if the throttle handle is brought to the aft stop, if it is a featherable prop.====' missing right side translation.
ERROR: language file line 'reverse pitch of prop, black knob full aft | (deg) { This is the pitch of the prop when in reverse, if it is reverse-equipped in the other engine screen. Be sure to enter a negative number if the pitch is negative, as it probably is!====' missing right side translation.
ERROR: language file line 'minimum prop governor RPM|(engine RPM) { If you pull the prop control back, you can lower the engine RPM to this setting. This does NOT include reverse or beta or feathered... enter the prop pitches for those things over to the left, and whatever rpm you get as a result, you get.====' missing right side translation.
ERROR: language file line 'prop mass ratio to solid aluminum { This is how heavy the prop or rotor is compared to one made of pure aluminum. Composite props, for example, are lighter. Heavier props speed up and slow down more slowly, and provide more auto-rotation ability in helicopters.====' missing right side translation.
ERROR: language file line '| tip weights on ROTORS, pounds, each { This is how many pounds of weight are in EACH rotor tip, increasing the rotor inertia, which is useful for helos and autogyros.====' missing right side translation.
ERROR: language file line 'tip mach at 50% power (for constant-mach props) { If you selected a constant-mach prop as the prop type, then the prop governor will automatically adjust the prop pitch to speed or slow the prop to try to maintain this mach number at the prop tip at 50% power (interpolating across the throttle range of travel).====' missing right side translation.
ERROR: language file line '| tip mach at 100% power (for constant-mach props) { If you selected a constant-mach prop as the prop type, then the prop governor will automatically adjust the prop pitch to speed or slow the prop to try to maintain this mach number at the prop tip at 100% power (interpolating across the throttle range of travel).====' missing right side translation.
ERROR: language file line '|all engines: have throttle-governor for helos { This option is for helos only. This automatically runs the throttle up and down as needed to hold the rotor rpm at the operational rotor RPM.====' missing right side translation.
ERROR: language file line '|FADEC limits RPM on all propeller engines { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation.
ERROR: language file line '|FADEC sets fuel-air ratio on recip engines { This option lets the engines on this plane be controlled by Full Authority Digital Engine Control systems.====' missing right side translation.
ERROR: language file line 'reverser area|(square feet) { This is the frontal area of each thrust reverser. This will increase drag during thrust reverser deployment.====' missing right side translation.
ERROR: language file line 'fan RPM at 100% N1|(rpm)====' missing right side translation.
ERROR: language file line '# prop { This is the total number of props... usually the same as the number of engines, but could be different for helos, autogyros, or lift-fan aircraft.====' missing right side translation.
ERROR: language file line '{ The prop direction will indicate which way the engine torques the craft under power. For jets, this is the compressor rotation direction.====' missing right side translation.
ERROR: language file line '|-vectors { This engine vectors up and down with the thrust vector if the vectored thrust option is chosen in the Helos and VTOLs window.====' missing right side translation.
ERROR: language file line 'prop radius|(--) { This is the radius of the propeller, which is the DISTANCE FROM THE PROPELLER HUB CENTER OUT TO THE PROPELLER TIPS====' missing right side translation.
ERROR: language file line '-|(m) { This is the tip CHORD of each propeller blade, which is the distance from the leading edge to the trailing edge of the blade. It is about 5 or 6 inches for light plane.====' missing right side translation.
ERROR: language file line 'fine and coarse pitch { This is the minimum pitch that the prop should be able to go to. Zero degrees is a typical 'flat' pitch. All angles are expected to be based on the TIP of the propeller====' missing right side translation.
ERROR: language file line 'number of transmissions|(#) { This is the number of independent transmissions that you have. Each transmission connects engines and props that turn together. For a single-engine plane, enter 1. For a twin-engine plane, enter 2. For something like the V-22, enter 1 (both props and engines are geared to a common transmission!) For a helicopter, enter 1 (all rotors are geared together!)====' missing right side translation.
ERROR: language file line 'engine #%1:N% drives transmission #====' missing right side translation.
ERROR: language file line '|this engine free-wheels { Check yes and the engine will not slow down the rotor or prop if it fails. This would be typical for a helicopter, whose rotor must continue to turn even if the engine is stopped. For almost all airplanes, though, the engine is connected directly to the prop, so the engine can NOT free-wheel... it is a rigid connection to the engine!====' missing right side translation.
ERROR: language file line 'prop #%1:N% is driven by transmission #====' missing right side translation.
ERROR: language file line 'minimum N1|(for fuel intro) { Turboprops only: introduce fuel ABOVE this N1 to avoid a hot-start!====' missing right side translation.
ERROR: language file line 'throttle advance time from idle to maximum|(sec) { This is how many seconds it will take the throttle to advance to full (from idle) if the throttle is instantly punched to max. The turbine will take a bit longer to spin up based on the turbine spool-up time shown on this page.====' missing right side translation.
ERROR: language file line 'free-turboprop spoolup time|(sec) { Free-turbine turboprops only: This is an indication of how much inertia the engine has. A larger number here will result in an engine that spools up more slowly. For a turbine, this is really how long N1 takes to speed up to max when the throttle is firewalled. Atmospheric conditions, heavy propellers, and throttle advance time can also affect the spool-up time.====' missing right side translation.
ERROR: language file line 'propeller pitch rate|(degrees per second) { This is how many degrees per second the prop rotates to adjust it's pitch. 45 degrees per second is default.====' missing right side translation.
ERROR: language file line 'minimum N2|(for fuel intro) { Introduce fuel ABOVE this N2 to avoid a hot-start!====' missing right side translation.
ERROR: language file line 'jet spoolup time|(sec) { This is an indication of how much inertia the engine has. A larger number here will result in an engine that spools up more slowly. For a turbine, this is really how long N1 takes to speed up to max when the throttle is firewalled. Atmospheric conditions, heavy propellers, and throttle advance time can also affect the spool-up time.====' missing right side translation.
ERROR: language file line 'electric engine drive efficiency|(ratio) { If you have an electric engine, this percentage of the power coming from the battery that will make it to the prop.====' missing right side translation.
ERROR: language file line 'electric engine re-gen efficiency|(ratio) { If you have an electric engine with re-gen braking, enter the efficiency of that re-gen braking here, and this percentage of the power going into the prop (if any) will be loaded into the battery.====' missing right side translation.
ERROR: language file line '|starter torque as a ratio of max engine torque. { Up to the design rpm, the starter will put out at least this much torque.  Higher numbers get the engine up to speed faster.====' missing right side translation.
ERROR: language file line '|starter design rpm as a ratio of max engine rpm. { This is how fast the starter can run the engine at its maximum torque.  The starter won't go much faster than this because it will lose torque at higher RPM.====' missing right side translation.
ERROR: language file line 'Starter will output %1:torque% ft-lbs at %2:rpm% rpm for %3:hp% hp.====' missing right side translation.
ERROR: language file line 'Starter will reach %1:N2%% N2 in approximately %2:seconds% seconds.====' missing right side translation.
ERROR: language file line 'Starter will reach %1:N1%% N1 in approximately %2:seconds% seconds.====' missing right side translation.
ERROR: language file line '-Prop #1====' missing right side translation.
ERROR: language file line '-Prop #====' missing right side translation.
ERROR: language file line 'SET BYPASS AND INLET MACH FOR THIS PLANE, TO BE USED IN X-PLANE!====' missing right side translation.
ERROR: language file line 'ENTER DATA POINTS HERE TO CHECK THRUST.====' missing right side translation.
ERROR: language file line 'max efficient inlet Mach|(Mach) { This is the maximum mach number at which the inlet can pass air to the engine efficiently. Above this mach number, losses in shock waves around the inlet will reduce engine efficiency.====' missing right side translation.
ERROR: language file line 'STALL WARNING====' missing right side translation.
ERROR: language file line 'FMS/GPS====' missing right side translation.
ERROR: language file line '|-electric gyro====' missing right side translation.
ERROR: language file line '|-vacuum gyro====' missing right side translation.
ERROR: language file line '-HNAV course|-GPS/LOC   { Autopilot takes course to intercept in nav/loc mode from either GPS or localizer. This is what is usually found in modern airplanes, with autopilots like G1000 or S-Tec Fivty Five.====' missing right side translation.
ERROR: language file line '|-OBS       { Autopilot takes the course to intercept in nav/loc mode from the OBS setting of the selected nav source. Simpler autopilots like the Bendix/King KAP-140 work like this when the plane has an HSI.====' missing right side translation.
ERROR: language file line '|-HDG       { Autopilot takes the course to intercept in nav/loc mode from the heading bug. The Bendix-King KAP-140 works like this when no HSI is installed in the plane. Dual-mode intercepts are not possible with that type of autopilot.====' missing right side translation.
ERROR: language file line '|-None      { This is a very old and basic type of autopilot that can only track a VOR radial once captured, but not intercept it. It only reacts to CDI deflection. Classic Sperry autopilots work like this.====' missing right side translation.
ERROR: language file line '|auto-load speed into pre-sel when ASI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line '|auto-load VVI into pre-sel when VVI mode engaged { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hit the ALT button to load your current altitude.====' missing right side translation.
ERROR: language file line '|vvi-up/dn buttons adjust pitch in pitch mode { Checking this button ON mimics some newer autopilots that let you adjust the pitch up or down a bit with the vvi buttons when in pitch mode.====' missing right side translation.
ERROR: language file line '|CWS button adjusts altitude hold { Checking this button ON is the modern convention, used in the G-1000, for example. With this type of autopilot, you simply hold the CWS button while flying up or down in altitude mode to change the altitude selection.====' missing right side translation.
ERROR: language file line '|roll mode defaults to OFF, not roll-hold { Checking this button ON means that the roll axis of the autopilot will default to NO ROLL CONTROL when turned on. This is unlike the Garmin 1000 convention, where the autopilot defaults to roll HOLD if turned on.====' missing right side translation.
ERROR: language file line '|pitch mode defaults to OFF, not pitch-hold { Checking this button ON means that the pitch axis of the autopilot will default to NO PITCH CONTROL when turned on. This is simply a one-axis autopilot, or acts as one axis if no pitch mode is selected! This is unlike the Garmin 1000 convention, where the autopilot defaults to pitch HOLD if turned on.====' missing right side translation.
ERROR: language file line 'localizer intercept to auto-engage BC|(deg, 0 for no auto-engage) { Enter 0 here to simply fly the BC localizers by manually hitting the BC button. Enter 90 deg to simulate some old Bendix-King autopilots, or 105 deg for non-Cessna G-1000's.====' missing right side translation.
ERROR: language file line 'has radio-alt decision-height callout|{ If you enter a decision-height into a radio altimeter in the cockpit, you will get a callout when you get to or near that altitude.====' missing right side translation.
ERROR: language file line 'has radio-alt callout advance|(ft) { SOME radio altimeters give the decision-height callout in ADVANCE of the decision-height to give you some warning. Enter that advance, in feet, here.====Radarhöhenmesser-Warnung im Voraus|(Fuß) { Manche Radarhöhenmesser rufen die Entscheidungshöhe vor dem Erreichen der Höhe aus, sozusagen als Vorwarnung. Geben Sie diese Höhendifferenz hier in Fuß ein. ' does not have the same trailing spaces.
ERROR: language file line 'pilot|-use modern ARINC424 capable { If you check this, then X-Plane will use an FMS capable of all ARINC 424 leg types, which can be used for simulating Garmin, Avidyne, and modern jet avionics. Keep in mind the pilot side is the system that is exposed to plugins.====' missing right side translation.
ERROR: language file line 'pilot|-use backwards-compatible FMS { If you check this, then X-Plane will use it's older simplified FMS system, which will not give fully-realistic Garmin and other avionics but is compatible with all plugins and older aircraft. Keep in mind the pilot side is the system that is exposed to plugins.====' missing right side translation.
ERROR: language file line 'copilot|-use modern ARINC424 capable { If you check this, then X-Plane will use an FMS capable of all ARINC 424 leg types, which can be used for simulating Garmin, Avidyne, and modern jet avionics. Keep in mind the copilot side is currently not exposed to plugins.====' missing right side translation.
ERROR: language file line 'copilot|-use backwards-compatible FMS { If you check this, then X-Plane will use it's older simplified FMS system, which will not give fully-realistic Garmin and other avionics but is compatible with all plugins and older aircraft. Keep in mind the copilot side is currently not exposed to plugins.====' missing right side translation.
ERROR: language file line '|stall warning pitch and volume are controlled by angle of attack====' missing right side translation.
ERROR: language file line 'TOP check to trigger MASTER CAUTION. BOTTOM check to trigger MASTER WARNING. SELECTOR for WAV FILE to play in the your aircraft's SOUNDS/CUSTOM folder.====' missing right side translation.
ERROR: language file line 'Each bus may be driven by any number of generators and batteries.====' missing right side translation.
ERROR: language file line 'If you have more buses than generators or batteries, then you will need the cross-tie always on!====' missing right side translation.
ERROR: language file line ' goes to bus #====' missing right side translation.
ERROR: language file line 'bus 1====' missing right side translation.
ERROR: language file line 'bus 1-2====' missing right side translation.
ERROR: language file line 'bus 1-2-3====' missing right side translation.
ERROR: language file line 'bus 1-2-3, 4-====' missing right side translation.
ERROR: language file line 'bus 1-2-3, 4-5====' missing right side translation.
ERROR: language file line 'max MP|(max POWER, redline RPM, sea level, ISA)====' missing right side translation.
ERROR: language file line 'spring k per unit mass lon, lat, vert| { ====' missing right side translation.
ERROR: language file line '#====#' missing right side translation.
ERROR: language file line ' { You may, optionally, assign a dataref for a switch in the sim to drive the slider, rather than having it driven by the but_command_slider switch. NOTE: YOU SHOULD PROBABLY START ASSIGNMENTS FROM #24 AND WORK DOWN, SINCE THE PRESENCE OF BUT_COMMAND_SLIDER BUTTONS ON THE PANEL WILL START AT THE FIRST SLIDER AND WORK UP!====' missing right side translation.
ERROR: language file line 'ELEMENT SPECS (ROOT AT LEFT, TIP AT RIGHT)====' missing right side translation.
ERROR: language file line 'You cannot attach the object '%1:file%' to this aircraft.====' missing right side translation.
ERROR: language file line 'Use '%1:file%' for this aircraft.====' missing right side translation.
ERROR: language file line 'This aircraft is '%1:file%'.====' missing right side translation.
ERROR: language file line 'All objects attached to your aircraft must be in the aircraft's objects sub-folder.====' missing right side translation.
ERROR: language file line 'shadow mode | { Controls which views this object casts shadows in.  You may be able to improve framerate by limiting which objects cast shadows.  For example, in an airliner with small windows there is probably no need to have the cabin seat objects cast shadows in an exterior view.====' missing right side translation.
ERROR: language file line '| hi-res { Check this to use higher texture resolution on this object. This is only recommended for objects that make up the cockpit instrument panel so the instruments are sharp!====' missing right side translation.
ERROR: language file line '| wreckage { Check this if this object is only shown when the aircraft is destroyed.====' missing right side translation.
ERROR: language file line 'No Prefill-Prefill-Prefill Only====' missing right side translation.
ERROR: language file line '{ Check this to cause X-Plane to exclude clouds behind this object.  Inside the 3-d cockpit blocking out clouds can significantly improve framerate.  Only do this with fully opaque, cheap-to-draw objects.  If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation.
ERROR: language file line '| use LOD { Check this to honor the LOD attributes in the OBJ.  By default X-Plane ignores LOD on airplanes and draws them from any distance.  Enable this to use LOD.  Using low LODs on tiny details of your plane improves framerate in the far view; X-Plane will simply stop drawing those details when the plane is far away.====' missing right side translation.
ERROR: language file line '| dim LIT { Check this to make the LIT textures appear dimmer in bright sunlight.  Enabling this option can prevent your plane from looking overly lit in full sunlight.====' missing right side translation.
ERROR: language file line 'Kill Dataref { When this dataref is non-zero, the object will be entirely removed from the plane.  Create your own dataref to kill unneeded objects and improve performance.====' missing right side translation.
ERROR: language file line 'Cockpit Object:====' missing right side translation.
ERROR: language file line '| pre-fill { Check this to cause X-Plane to exclude clouds behind this object.  Inside the 3-d cockpit blocking out clouds can significantly improve framerate.  Only do this with fully opaque, cheap-to-draw objects.  If you use a translucent objects the clouds will be missing through the translucency!====' missing right side translation.
ERROR: language file line 'roll input to engage|(ratio)====' missing right side translation.
ERROR: language file line 'aileron trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'elevator trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rudder trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line 'rotor trim full-deflection time|(sec, from center to either extreme) { This is the total time taken for the trim to go from center to either extreme.====' missing right side translation.
ERROR: language file line '|aileron trim tab adjust { 0 is centered, -1.0 is for full left aileron, +1.0 is for right aileron.====' missing right side translation.
ERROR: language file line '|elevator trim tab adjust { 0 is centered, -1.0 is for full down elevator, +1.0 is for full up elvator.====' missing right side translation.
ERROR: language file line '|rudder trim tab adjust { 0 is centered, -1.0 is for full left rudder, +1.0 is for right rudder.====' missing right side translation.
ERROR: language file line '  minimum rudder deflection time|seconds { Enter 0.0 to be able to deflect the controls as fast as the pilot can move the stick or the art stab system can command a deflection, as is the case with all manual control systems. If the plane has a hydraulic system and a max rate of control deflection, though, enter how long it takes to go from center to fully-deflected here.====Minimale Seitenruder-Auslenkzeit|Sekunden { Geben Sie 0.0 ein, wenn die Steuerflächen unmittelbar der Steuereingabe des Piloten oder des Stabilisierungssystems folgen soll, wie es bei manuellen Steuersystemen der Fall ist. Wenn das Flugzeug jedoch ein Hydrauliksystem mit einer maximalen Auslenkgeschwindigkeit besitzt, geben Sie die Zeit ein, die für die Fahrt von der Mittelstellung bis zur vollen Auslenkung benötigt wird.' does not have the same leading spaces.
ERROR: language file line 'reference speed for pitch force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation.
ERROR: language file line 'reference speed for roll force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation.
ERROR: language file line 'reference speed for yaw force|(kias) { At this indicated airspeed, the forces will be as entered here. Those forces will come up and down with the dynamic pressure, which of course runs with the square of the indicated airspeed.====' missing right side translation.
ERROR: language file line 'force for full-up-elevator|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation.
ERROR: language file line 'force for full-right aileron|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation.
ERROR: language file line 'force for full-right rudder|(lb) { When the control is fully-deflected, you will see this much force at the reference speed. That force will vary with the dynamic pressure on the aircraft.====' missing right side translation.
ERROR: language file line 'force for maxmimum brakes|(lb) { When the control is fully-deflected, you will see this much force.====' missing right side translation.
ERROR: language file line 'pitch damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation.
ERROR: language file line 'roll damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation.
ERROR: language file line 'yaw damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate, linearly with dynamic pressure.====' missing right side translation.
ERROR: language file line 'brake damping|(lb/(deflections/sec)) { If you fully-deflect the controls in one second, this will be the force opposing motion. Force scales linearly with deflection rate.====' missing right side translation.
ERROR: language file line 'pitch force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line 'roll force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line 'yaw force in max turbulence at reference speed|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line 'ground-feedback pitch force|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line 'ground-feedback roll force|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line 'ground-feedback yaw force|(lb) { This is going away soon, so should not be used.====' missing right side translation.
ERROR: language file line '-brakes| { Just check here if you want this gear to have brakes.====' missing right side translation.
ERROR: language file line '-retracts| { Just check here if you want this gear to retract.====' missing right side translation.
ERROR: language file line '|-castors { Just check here if you want this gear to free-castor when the tailwheel lock is released. Enter the steering values above if you want it to steer.====' missing right side translation.
ERROR: language file line '|-faired { This indicates whether a streamlined wheel fairing is over the gear, which will reduce the drag of the landing gear.====' missing right side translation.
ERROR: language file line 'additional gear flatplate area|(square feet) { X-Plane already considers the frontal area of struts, tires, and doors in its landing gear drag estimates. BUT, in real airplanes, there is ADDITIONAL drag from the gear WELLS disrupting the airflow over the craft. Enter the effective flatplate area here associated with that drag to increase the drag associated with landing gear deployment. A Beech Baron, for example, might have 2 square feet of effective frontal area from this effect. ====Zusätzlicher Flächenwiderstand|(Fuß²) { X-Plane bezieht grundsätzlich die Frontalfläche von Fahrwerkbeinen, Reifen und Schachttüren in die Berechnung des Luftwiderstands schon mit ein. Aber die Fahrwerksschächte erzeugen in der Realität zusätzlichen Widerstand, da sie den Fluss stören. Hier können Sie die äquivalente Fläche eingeben, die den Widerstand auf entsprechende Weise wie die Schachtöffnung bei ausgefahrenem Fahrwerk erhöhen würde. Eine Beech Baron kann z.B. 2 Quadrat-Fuß äquivalente Frontalfläche haben, die auf diesen Effekt zurückgeht.' does not have the same trailing spaces.
ERROR: language file line 'deflection when under zero load|==== Auslenkung unter Nulllast' does not have the same leading spaces.
ERROR: language file line 'SLUNG LOAD / WATER / RETARDANT / OTHER AIRCRAFT LOCATION====' missing right side translation.
ERROR: language file line 'long slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation.
ERROR: language file line 'lat  slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation.
ERROR: language file line 'vert slung load / water / retardant / other aircraft attach|(--) { slung load attach point====' missing right side translation.
ERROR: language file line 'long water / retardant tank|(--) { This is where the liquid is stored====' missing right side translation.
ERROR: language file line 'lat  water / retardant tank|(--) { This is where the liquid is stored====' missing right side translation.
ERROR: language file line 'vert water / retardant tnak|(--) { This is where the liquid is stored====' missing right side translation.
ERROR: language file line '-tank #====Tank Nr. ' does not have the same trailing spaces.
ERROR: language file line 'Prop ====Propeller' does not have the same trailing spaces.
ERROR: language file line 'Misc Wing ====Diverse Flügel' does not have the same trailing spaces.
ERROR: language file line 'VECTORED-THRUST====' missing right side translation.
ERROR: language file line 'differential collective with roll input|(when in vertical thrust vector, deg) { VTOLs like the Bell 609 will alter the collective pitch (lift) of the rotor on either side to roll the craft in hover. Enter the parameter for that here.====' missing right side translation.
ERROR: language file line 'differential collective with yaw input|(when in horizontal thrust vector, deg) { VTOLs like the Bell 609 will alter the collective pitch (lift) of the rotor on either side to yaw the craft in forward flight (!) Enter the parameter for that here.====' missing right side translation.
ERROR: language file line 'differential collective with pitch input|(when in vertical thrust vector, deg) { VTOLs like the X-19 have rotor towards front and towards the back of the craft... they can adjust their collective pitch in hover to pitch the aircraft.====' missing right side translation.
ERROR: language file line 'differential throttle with roll input|(when in any thrust vector) { This is how simple Quad-rotor drones roll: More power on left or right side.====' missing right side translation.
ERROR: language file line 'differential throttle with yaw input|(when in any thrust vector) { This is how simple Quad-rotor drones yaw: More power on CW or CCW rotors.====' missing right side translation.
ERROR: language file line 'differential throttle with pitch input|(when in any thrust vector) { This is how simple Quad-rotor drones pitch: More power on left or right side====' missing right side translation.
ERROR: language file line 'DIFFERENTIAL THRUST-VECTOR FOR MANEUVERING====' missing right side translation.
ERROR: language file line '|auto-set cowl flaps { This option will automatically adjust the cowl flaps to maintain middle-of-the-green cylinder-head temperature.====' missing right side translation.
ERROR: language file line '|auto-sync engines if the throttles are close { If you check this, then the throttles will auto-sync if they are close to try to hold the same power. You can turn this system off, though, with switches on the panel.====' missing right side translation.
ERROR: language file line '|com radio equipped { Check here if the plane has com radios to catch ATIS.====' missing right side translation.
ERROR: language file line '|marker beacon audio equipped { Some planes have aural marker beacon indicators, others not.====' missing right side translation.
ERROR: language file line '|inverted fuel and oil systems equipped { If you check this, then the fuel and oil systems will continue to work even when in negative G. DON'T check this box? DON'T pull negative-G.====' missing right side translation.
ERROR: language file line '|TCAS equipped { Check here if the plane has TCAS alerting system.====' missing right side translation.
ERROR: language file line '|verbal 500 AGL callout equipped { ====' missing right side translation.
ERROR: language file line '|gear warning horn equipped { Use this option if your craft is equipped with a simple warning that will activate if you do not lower your landing gear when you reduce power. This system is used on many light aircraft.====' missing right side translation.
ERROR: language file line '|engine-fire bell equipped { Use this option if you want a warning bell to go off whenever an engine is... umm... on fire.====' missing right side translation.
ERROR: language file line 'Make Weapon OBJ====' missing right side translation.
ERROR: language file line '|-Flare { Counter-measure flare====' missing right side translation.
ERROR: language file line '|-Para-Flare { Counter-measure flare with parachute====' missing right side translation.
ERROR: language file line '|-Chaff { Counter-measure chaff====' missing right side translation.
ERROR: language file line '|-air-to-air missile: heat-seeking (FAF) { This is an air-to-air missile, tracking heat of target after fired and forgotten.====' missing right side translation.
ERROR: language file line '|-air-to-ground missile: GPS-guided { This is an air-to-ground missile, GPS-guided.====' missing right side translation.
ERROR: language file line '|-air-to-ground bomb: GPS-guided { This is an air-to-ground bomb, GPS-guided.====' missing right side translation.
ERROR: language file line 'Weight|(--) { ====' missing right side translation.
ERROR: language file line '  warhead type { Do you really need an explanation?====Sprengkopftyp { Brauchen Sie wirklich eine Erklärung?' does not have the same leading spaces.
ERROR: language file line 'drag-chute additional drag area|(ft*ft) { This is the equivalent frontal-area (Cd=1.0) of any parachutes, speedbrakes, streamers, or other devices that deploy to slow the weapon immediately after it is released.====' missing right side translation.
ERROR: language file line 'SHOW ALL PARTS IN X-PLANE====' missing right side translation.
ERROR: language file line 'HIDE ALL PARTS IN X-PLANE====' missing right side translation.
ERROR: language file line 'SHOW PARTS, BUT NOT OBJECT, IN PLANE-MAKER====' missing right side translation.
ERROR: language file line 'Use departure wizard====' missing right side translation.
ERROR: language file line '* Recommended Radio Frequency====' missing right side translation.
ERROR: language file line 'Click a row to tune your COM1 radio to that frequency.====' missing right side translation.
ERROR: language file line 'Air Traffic Control====' missing right side translation.
ERROR: language file line 'ATC has cancelled all guidance for you because you violated their instructions beyond the acceptable tolerance. You can file a new flight plan and try again if you’d like.====' missing right side translation.
ERROR: language file line 'Communication with ATC will not be possible.====' missing right side translation.
ERROR: language file line 'Your radios are inoperative.====' missing right side translation.
ERROR: language file line 'Your aircraft power is off.====' missing right side translation.
ERROR: language file line 'Your audio panel is off.====' missing right side translation.
ERROR: language file line 'If you’d like to receive ATC guidance, you’ll need to first file a flight plan.====' missing right side translation.
ERROR: language file line 'Requesting the proper altimeter setting from ATC allows you to calibrate your altimeter to match the airport’s elevation and current barometric pressure.====' missing right side translation.
ERROR: language file line 'Tune to one of the area’s ATC frequencies to request the proper altimeter setting, which will allow you to calibrate your altimeter to match the airport’s elevation and current barometric pressure.====' missing right side translation.
ERROR: language file line 'To request clearance, tune your COM radio to the frequency of the ATC controller acting as clearance delivery (indicated with an asterisk* in the table to the right).====' missing right side translation.
ERROR: language file line 'To request taxi instructions, tune your COM radio to the frequency of the ATC controller acting as ground (indicated with an asterisk* in the table to the right).====' missing right side translation.
ERROR: language file line 'Check in for takeoff clearance by tuning your COM radio to the frequency of the ATC controller acting as tower  (indicated with an asterisk* in the table to the right).====' missing right side translation.
ERROR: language file line 'File Flight Plan====' missing right side translation.
ERROR: language file line 'Some fields above need your attention====' missing right side translation.
ERROR: language file line 'File====' missing right side translation.
ERROR: language file line 'Popup clearance (i.e., clearance requested in flight) requires no departure airport.====' missing right side translation.
ERROR: language file line 'Departure ICAO====' missing right side translation.
ERROR: language file line 'Airport ID====' missing right side translation.
ERROR: language file line 'Arrival ICAO====' missing right side translation.
ERROR: language file line 'Enroute Altitude====' missing right side translation.
ERROR: language file line 'MSL====' missing right side translation.
ERROR: language file line 'Route====' missing right side translation.
ERROR: language file line 'Optional route with NDBs, VORs, fixes, and V/J airways, but no SIDS/STARS====' missing right side translation.
ERROR: language file line 'Auto-tune recommended frequencies====' missing right side translation.
ERROR: language file line 'Normally, you have to tune your COM1 radio either by hand or by clicking on the controller you want to talk to in the list. When this is checked, though, X-Plane will automatically tune your COM1 radio for you whenever the recommended controller (denoted with an asterisk) changes.====' missing right side translation.
ERROR: language file line '(Radios inoperative.)====' missing right side translation.
ERROR: language file line '(Aircraft Power Off.)====' missing right side translation.
ERROR: language file line '(Audio Panel Off.)====' missing right side translation.
ERROR: language file line 'AIRCRAFT====' missing right side translation.
ERROR: language file line 'AI Aircraft====' missing right side translation.
ERROR: language file line 'Back to List====' missing right side translation.
ERROR: language file line 'AIRCRAFT CLASS====' missing right side translation.
ERROR: language file line 'ENGINE TYPE====' missing right side translation.
ERROR: language file line 'MANUFACTURER====' missing right side translation.
ERROR: language file line 'DESIGN STUDIO====' missing right side translation.
ERROR: language file line 'FILE PATH====' missing right side translation.
ERROR: language file line 'Weight, Balance, & Fuel====' missing right side translation.
ERROR: language file line 'Enable enemy combatants====' missing right side translation.
ERROR: language file line 'Start with engines running====' missing right side translation.
ERROR: language file line 'Glider start type:====' missing right side translation.
ERROR: language file line 'Tow Plane====' missing right side translation.
ERROR: language file line 'Select this option to have your glider towed aloft.====' missing right side translation.
ERROR: language file line 'Winch Launch====' missing right side translation.
ERROR: language file line 'Select this option to have your glider launched from a ground-based winch.====' missing right side translation.
ERROR: language file line 'Fly with piggybacking Space Shuttle====' missing right side translation.
ERROR: language file line 'Unknown====' missing right side translation.
ERROR: language file line 'Single Engine====' missing right side translation.
ERROR: language file line 'Twin Engine====' missing right side translation.
ERROR: language file line 'None====' missing right side translation.
ERROR: language file line 'Search by aircraft name, manufacturer, class, author, studio, file location, or file name.====' missing right side translation.
ERROR: language file line 'All Classes====' missing right side translation.
ERROR: language file line 'All Engine Types====' missing right side translation.
ERROR: language file line 'All Manufacturers====' missing right side translation.
ERROR: language file line 'All Studios====' missing right side translation.
ERROR: language file line 'Search by airport name, identifier, or features (like “3D†or “gravelâ€).====' missing right side translation.
ERROR: language file line 'No airports found.====' missing right side translation.
ERROR: language file line 'Try a different search term.====' missing right side translation.
ERROR: language file line 'AIRPORT NAME====' missing right side translation.
ERROR: language file line 'CODE====' missing right side translation.
ERROR: language file line 'FEATURES====' missing right side translation.
ERROR: language file line 'FLIGHT IN PROGRESS====' missing right side translation.
ERROR: language file line 'Change Location====' missing right side translation.
ERROR: language file line 'Current location:====' missing right side translation.
ERROR: language file line 'LOCATION====' missing right side translation.
ERROR: language file line 'TIME OF DAY====' missing right side translation.
ERROR: language file line 'Tracking real world time====' missing right side translation.
ERROR: language file line 'WEATHER====' missing right side translation.
ERROR: language file line 'Customized====' missing right side translation.
ERROR: language file line 'Delete Cloud Layer====' missing right side translation.
ERROR: language file line 'Top====' missing right side translation.
ERROR: language file line 'ft MSL====' missing right side translation.
ERROR: language file line 'Base====' missing right side translation.
ERROR: language file line 'CLOUD TYPE====' missing right side translation.
ERROR: language file line 'BASE====' missing right side translation.
ERROR: language file line '+ Cloud Layer====' missing right side translation.
ERROR: language file line '+ Wind Layer====' missing right side translation.
ERROR: language file line 'Preset Conditions====' missing right side translation.
ERROR: language file line 'Refresh====' missing right side translation.
ERROR: language file line 'Last updated:====' missing right side translation.
ERROR: language file line 'Weather download failed.====' missing right side translation.
ERROR: language file line 'Downloading weather...====' missing right side translation.
ERROR: language file line 'Refresh rate====' missing right side translation.
ERROR: language file line 'Match real world conditions====' missing right side translation.
ERROR: language file line 'LAYER PROPERTIES====' missing right side translation.
ERROR: language file line 'ATMOSPHERIC CONDITIONS====' missing right side translation.
ERROR: language file line 'THERMALS====' missing right side translation.
ERROR: language file line 'BODIES OF WATER====' missing right side translation.
ERROR: language file line 'Select a layer to edit.====' missing right side translation.
ERROR: language file line 'Add or select a layer to edit.====' missing right side translation.
ERROR: language file line 'Add a layer to edit.====' missing right side translation.
ERROR: language file line 'Select a layer to view.====' missing right side translation.
ERROR: language file line 'No wind or cloud layers to view.====' missing right side translation.
ERROR: language file line 'This machine is set up to receive weather information over the network from a master machine.====' missing right side translation.
ERROR: language file line 'You can edit the weather from the master machine.====' missing right side translation.
ERROR: language file line 'CLOUDS====' missing right side translation.
ERROR: language file line 'Add Cloud Layer====' missing right side translation.
ERROR: language file line 'WIND====' missing right side translation.
ERROR: language file line 'Add Wind Layer====' missing right side translation.
ERROR: language file line 'Set visibility as====' missing right side translation.
ERROR: language file line 'Visibility====' missing right side translation.
ERROR: language file line 'sm====' missing right side translation.
ERROR: language file line 'Runway visual range (RVR)====' missing right side translation.
ERROR: language file line 'Precipitation====' missing right side translation.
ERROR: language file line 'Storminess====' missing right side translation.
ERROR: language file line 'Temperature at nearest airport====' missing right side translation.
ERROR: language file line 'Barometric pressure at sea level====' missing right side translation.
ERROR: language file line 'Atmospheric visibility====' missing right side translation.
ERROR: language file line '°F====' missing right side translation.
ERROR: language file line '°C====' missing right side translation.
ERROR: language file line 'inHg====' missing right side translation.
ERROR: language file line 'mbar====' missing right side translation.
ERROR: language file line 'Altitude====' missing right side translation.
ERROR: language file line 'ft AGL====' missing right side translation.
ERROR: language file line 'Coverage====' missing right side translation.
ERROR: language file line '%====' missing right side translation.
ERROR: language file line 'Climb Rate====' missing right side translation.
ERROR: language file line 'ft/min====' missing right side translation.
ERROR: language file line 'Wave Height====' missing right side translation.
ERROR: language file line 'Wave Direction====' missing right side translation.
ERROR: language file line 'deg====' missing right side translation.
ERROR: language file line 'VISIBILITY====' missing right side translation.
ERROR: language file line 'PRECIPITATION====' missing right side translation.
ERROR: language file line 'STORMINESS====' missing right side translation.
ERROR: language file line 'TEMPERATURE====' missing right side translation.
ERROR: language file line 'BAROMETRIC PRESSURE====' missing right side translation.
ERROR: language file line 'ALTITUDE====' missing right side translation.
ERROR: language file line 'COVERAGE====' missing right side translation.
ERROR: language file line 'CLIMB RATE====' missing right side translation.
ERROR: language file line 'WAVE HEIGHT====' missing right side translation.
ERROR: language file line 'WAVE SPEED====' missing right side translation.
ERROR: language file line 'WAVE LENGTH====' missing right side translation.
ERROR: language file line 'WAVE DIRECTION====' missing right side translation.
ERROR: language file line 'Delete Wind Layer====' missing right side translation.
ERROR: language file line 'Direction====' missing right side translation.
ERROR: language file line 'Speed====' missing right side translation.
ERROR: language file line 'kts====' missing right side translation.
ERROR: language file line 'Gust Speed Increase====' missing right side translation.
ERROR: language file line 'Shear Amount====' missing right side translation.
ERROR: language file line 'DIRECTION====' missing right side translation.
ERROR: language file line 'SPEED====' missing right side translation.
ERROR: language file line 'TURBULENCE====' missing right side translation.
ERROR: language file line 'SHEAR AMOUNT====' missing right side translation.
ERROR: language file line 'GUST SPEED INCREASE====' missing right side translation.
ERROR: language file line 'Search by failure name====' missing right side translation.
ERROR: language file line 'NO FAILURES FOUND====' missing right side translation.
ERROR: language file line 'Your search did not match any failures. Try a different search term.====' missing right side translation.
ERROR: language file line 'Fix All Systems====' missing right side translation.
ERROR: language file line 'Resets all systems to working.====' missing right side translation.
ERROR: language file line 'Set global mean time between failures====' missing right side translation.
ERROR: language file line 'If checked, X-Plane will apply a mean time between failures to all systems, in addition to any failure probabilities you set in the window above.====' missing right side translation.
ERROR: language file line 'hours====' missing right side translation.
ERROR: language file line 'Global MTBF applies in addition to failures selected above====' missing right side translation.
ERROR: language file line 'No map available====' missing right side translation.
ERROR: language file line 'Airport Starts====' missing right side translation.
ERROR: language file line 'Special Starts====' missing right side translation.
ERROR: language file line 'Confirm====' missing right side translation.
ERROR: language file line 'STARTS====' missing right side translation.
ERROR: language file line 'DETAILS====' missing right side translation.
ERROR: language file line 'RAMP====' missing right side translation.
ERROR: language file line 'RUNWAY====' missing right side translation.
ERROR: language file line 'On runway====' missing right side translation.
ERROR: language file line '3 nm approach====' missing right side translation.
ERROR: language file line '10 nm approach====' missing right side translation.
ERROR: language file line 'Back to Other Aircraft List====' missing right side translation.
ERROR: language file line 'Enemy Skill Level====' missing right side translation.
ERROR: language file line 'Remove====' missing right side translation.
ERROR: language file line 'Edit====' missing right side translation.
ERROR: language file line 'Very Easy====' missing right side translation.
ERROR: language file line 'Easy====' missing right side translation.
ERROR: language file line 'Medium====' missing right side translation.
ERROR: language file line 'Hard====' missing right side translation.
ERROR: language file line 'Very Hard====' missing right side translation.
ERROR: language file line 'OTHER AIRCRAFT====' missing right side translation.
ERROR: language file line 'Add Aircraft====' missing right side translation.
ERROR: language file line 'Randomize aircraft each flight====' missing right side translation.
ERROR: language file line 'Month====' missing right side translation.
ERROR: language file line 'Day====' missing right side translation.
ERROR: language file line 'Hour====' missing right side translation.
ERROR: language file line 'Minute====' missing right side translation.
ERROR: language file line 'GMT Offset====' missing right side translation.
ERROR: language file line 'Track real-world date & time====' missing right side translation.
ERROR: language file line 'Reset to Default Armament====' missing right side translation.
ERROR: language file line 'Select weapon====' missing right side translation.
ERROR: language file line 'Weather Settings====' missing right side translation.
ERROR: language file line 'Check this box to have X-Plane set the weather to match real-world weather reports, downloaded automatically from the Internet.====' missing right side translation.
ERROR: language file line 'WEIGHT, BALANCE, & FUEL====' missing right side translation.
ERROR: language file line 'TOTAL WEIGHT====' missing right side translation.
ERROR: language file line 'EMPTY WEIGHT====' missing right side translation.
ERROR: language file line 'MAX WEIGHT====' missing right side translation.
ERROR: language file line 'FLIGHT TIME====' missing right side translation.
ERROR: language file line 'NORMAL CRUISE====' missing right side translation.
ERROR: language file line 'Restore Defaults====' missing right side translation.
ERROR: language file line 'Left Side Fuel Total====' missing right side translation.
ERROR: language file line 'Right Side Fuel Total====' missing right side translation.
ERROR: language file line 'Center Fuel Total====' missing right side translation.
ERROR: language file line 'Center of Gravity====' missing right side translation.
ERROR: language file line 'A CG offset of zero, with zero fuel and zero ordnance, gives the CG that is listed as the default in Plane Maker. Fuel and ordnance load will offset you from the default CG according to their locations on the craft. In addition, the CG you set offsets the entire loaded mass of the aircraft from default, as might be obtained with baggage or passengers.====' missing right side translation.
ERROR: language file line 'Payload Weight====' missing right side translation.
ERROR: language file line 'Total Fuel Weight====' missing right side translation.
ERROR: language file line 'JATO Fuel Weight====' missing right side translation.
ERROR: language file line 'Jettisonable Load Weight====' missing right side translation.
ERROR: language file line 'Slung Load Weight====' missing right side translation.
ERROR: language file line 'Shiftable Weight====' missing right side translation.
ERROR: language file line 'Just now====' missing right side translation.
ERROR: language file line '1 minute ago====' missing right side translation.
ERROR: language file line 'Get Me Lost====' missing right side translation.
ERROR: language file line 'minutes====' missing right side translation.
ERROR: language file line 'KIAS====' missing right side translation.
ERROR: language file line 'ft. AGL====' missing right side translation.
ERROR: language file line 'Advanced====' missing right side translation.
ERROR: language file line 'Outer Marker====' missing right side translation.
ERROR: language file line 'Middle Marker====' missing right side translation.
ERROR: language file line 'Inner Marker====' missing right side translation.
ERROR: language file line 'No nearby airports====' missing right side translation.
ERROR: language file line 'Mode====' missing right side translation.
ERROR: language file line 'Layers====' missing right side translation.
ERROR: language file line 'Airports====' missing right side translation.
ERROR: language file line 'Localizers====' missing right side translation.
ERROR: language file line 'VORs====' missing right side translation.
ERROR: language file line 'NDBs====' missing right side translation.
ERROR: language file line 'DMEs====' missing right side translation.
ERROR: language file line 'Fixes====' missing right side translation.
ERROR: language file line 'Airways====' missing right side translation.
ERROR: language file line 'Flight path====' missing right side translation.
ERROR: language file line 'Marker beacons====' missing right side translation.
ERROR: language file line 'Glideslope====' missing right side translation.
ERROR: language file line 'HIDE====' missing right side translation.
ERROR: language file line 'SHOW====' missing right side translation.
ERROR: language file line 'VFR Sectional====' missing right side translation.
ERROR: language file line 'IFR Low Enroute====' missing right side translation.
ERROR: language file line 'IFR High Enroute====' missing right side translation.
ERROR: language file line 'Add NDB====' missing right side translation.
ERROR: language file line 'Add VOR====' missing right side translation.
ERROR: language file line 'Add VOR-DME====' missing right side translation.
ERROR: language file line 'Add Standalone DME====' missing right side translation.
ERROR: language file line 'Add Localizer====' missing right side translation.
ERROR: language file line 'Add Glideslope====' missing right side translation.
ERROR: language file line 'Add ILS====' missing right side translation.
ERROR: language file line 'Add Fix====' missing right side translation.
ERROR: language file line 'Add Outer Marker====' missing right side translation.
ERROR: language file line 'Add Middle Marker====' missing right side translation.
ERROR: language file line 'Add Inner Marker====' missing right side translation.
ERROR: language file line 'Heading====' missing right side translation.
ERROR: language file line 'knots true====' missing right side translation.
ERROR: language file line 'Climb angle====' missing right side translation.
ERROR: language file line 'degrees====' missing right side translation.
ERROR: language file line 'Relative Location====' missing right side translation.
ERROR: language file line 'Radial====' missing right side translation.
ERROR: language file line 'Distance====' missing right side translation.
ERROR: language file line 'Latitude:====' missing right side translation.
ERROR: language file line 'Longitude:====' missing right side translation.
ERROR: language file line 'Move====' missing right side translation.
ERROR: language file line 'Final Approach====' missing right side translation.
ERROR: language file line 'Details====' missing right side translation.
ERROR: language file line 'MEAN SEA LEVEL====' missing right side translation.
ERROR: language file line 'Communications====' missing right side translation.
ERROR: language file line 'Conditions====' missing right side translation.
ERROR: language file line 'Name:====' missing right side translation.
ERROR: language file line 'Identifier:====' missing right side translation.
ERROR: language file line 'Frequency:====' missing right side translation.
ERROR: language file line 'Elevation:====' missing right side translation.
ERROR: language file line 'DME Offset:====' missing right side translation.
ERROR: language file line 'nm====' missing right side translation.
ERROR: language file line 'Heading:====' missing right side translation.
ERROR: language file line 'deg magnetic====' missing right side translation.
ERROR: language file line 'Range:====' missing right side translation.
ERROR: language file line 'Glideslope:====' missing right side translation.
ERROR: language file line 'Tune NAV1====' missing right side translation.
ERROR: language file line 'Tune NAV2====' missing right side translation.
ERROR: language file line 'ILS Approach====' missing right side translation.
ERROR: language file line 'LOC Approach====' missing right side translation.
ERROR: language file line 'Change Aircraft====' missing right side translation.
ERROR: language file line 'Change Weather====' missing right side translation.
ERROR: language file line 'Apply====' missing right side translation.
ERROR: language file line 'Apply Changes====' missing right side translation.
ERROR: language file line 'No failed systems.====' missing right side translation.
ERROR: language file line 'Failed Systems====' missing right side translation.
ERROR: language file line 'Reset Weight & Balance====' missing right side translation.
ERROR: language file line 'Load Selected Flight====' missing right side translation.
ERROR: language file line 'Current time====' missing right side translation.
ERROR: language file line 'FAILURES====' missing right side translation.
ERROR: language file line 'Load Flight====' missing right side translation.
ERROR: language file line 'Save Flight====' missing right side translation.
ERROR: language file line '<====' missing right side translation.
ERROR: language file line '>====' missing right side translation.
ERROR: language file line 'Load New Checklist====' missing right side translation.
ERROR: language file line 'End of file.====' missing right side translation.
ERROR: language file line 'No file loaded.====' missing right side translation.
ERROR: language file line 'Open Checklist====' missing right side translation.
ERROR: language file line '[End of file]====' missing right side translation.
ERROR: language file line 'Hide Checklist====' missing right side translation.
ERROR: language file line 'Standard gravitational parameter (mu)====' missing right side translation.
ERROR: language file line 'x 10^14====' missing right side translation.
ERROR: language file line 'Planet radius====' missing right side translation.
ERROR: language file line 'kilometers====' missing right side translation.
ERROR: language file line 'Derived gravitational force (G)====' missing right side translation.
ERROR: language file line 'meters per second squared====' missing right side translation.
ERROR: language file line 'Reset Environment Proprties====' missing right side translation.
ERROR: language file line 'Date====' missing right side translation.
ERROR: language file line 'Tail Number====' missing right side translation.
ERROR: language file line 'Departure====' missing right side translation.
ERROR: language file line 'Arrival====' missing right side translation.
ERROR: language file line 'Landings====' missing right side translation.
ERROR: language file line 'Total Hours====' missing right side translation.
ERROR: language file line 'Night Hours====' missing right side translation.
ERROR: language file line 'Instrument Hours====' missing right side translation.
ERROR: language file line 'Cross Country Hours====' missing right side translation.
ERROR: language file line 'Total:====' missing right side translation.
ERROR: language file line 'Open Logbook====' missing right side translation.
ERROR: language file line 'New Logbook====' missing right side translation.
ERROR: language file line 'Load New File====' missing right side translation.
ERROR: language file line 'Open Text File====' missing right side translation.
ERROR: language file line 'VIDEO RECORDING OPTIONS====' missing right side translation.
ERROR: language file line 'Frame rate of video====' missing right side translation.
ERROR: language file line 'frames per second====' missing right side translation.
ERROR: language file line 'Width of video====' missing right side translation.
ERROR: language file line 'pixels====' missing right side translation.
ERROR: language file line 'Video quality====' missing right side translation.
ERROR: language file line 'Capture video in background====' missing right side translation.
ERROR: language file line 'This lets you run at a higher framerate when capturing videos, but results in an upside-down movie on some computers.====' missing right side translation.
ERROR: language file line 'Create time lapse video====' missing right side translation.
ERROR: language file line 'Time multiplier====' missing right side translation.
ERROR: language file line 'ratio====' missing right side translation.
ERROR: language file line 'Low====' missing right side translation.
ERROR: language file line 'High====' missing right side translation.
ERROR: language file line 'REPORT CARD====' missing right side translation.
ERROR: language file line 'Retry====' missing right side translation.
ERROR: language file line 'End Training====' missing right side translation.
ERROR: language file line 'Please enter your X-Plane 11 digital download product key to unlock the full version of X-Plane.====' missing right side translation.
ERROR: language file line 'Contacting authorization server...====' missing right side translation.
ERROR: language file line 'If you believe this to be an error, click Try Again below, or contact X-Plane customer support at info@x-plane.com.====' missing right side translation.
ERROR: language file line 'I Don’t Have a Product Key====' missing right side translation.
ERROR: language file line 'Use Demo====' missing right side translation.
ERROR: language file line 'UNLOCK X-PLANE====' missing right side translation.
ERROR: language file line 'COMPLETE YOUR INSTALLATION====' missing right side translation.
ERROR: language file line 'ABOUT THE X-PLANE DEMO====' missing right side translation.
ERROR: language file line 'FULL VERSION UNLOCKED====' missing right side translation.
ERROR: language file line 'I Have an X-Plane 11 DVD====' missing right side translation.
ERROR: language file line 'I Have a Digital Download Product Key====' missing right side translation.
ERROR: language file line 'Please insert your X-Plane 11 Disc 1 DVD now to unlock the full version of X-Plane.====' missing right side translation.
ERROR: language file line 'I Don‘t Have an X-Plane 11 DVD====' missing right side translation.
ERROR: language file line 'Or, insert an X-Plane 11 Disc 1 DVD now to unlock the full version of X-Plane.====' missing right side translation.
ERROR: language file line 'Authorization successful.====' missing right side translation.
ERROR: language file line 'OK====' missing right side translation.
ERROR: language file line 'MISSING SCENERY====' missing right side translation.
ERROR: language file line 'Install Missing Scenery====' missing right side translation.
ERROR: language file line 'This region has missing scenery!====' missing right side translation.
ERROR: language file line 'Areas with no scenery will have nothing but water around them.====' missing right side translation.
ERROR: language file line 'You can download the missing scenery for free through Steam.====' missing right side translation.
ERROR: language file line 'Right click on X-Plane in your Steam library. Then go to Properties > DLC and select the continent from the list.====' missing right side translation.
ERROR: language file line 'Email support@aerosoft.com if you need help.====' missing right side translation.
ERROR: language file line 'Would you like to install the missing scenery now?====' missing right side translation.
ERROR: language file line 'You can use the X-Plane installer to add missing scenery at any time.====' missing right side translation.
ERROR: language file line 'The full version of X-Plane includes scenery for the full world between 74 degrees north and 60 degree south latitudes.====' missing right side translation.
ERROR: language file line 'Continue with Water Only====' missing right side translation.
ERROR: language file line 'DOWNLOADING UPDATE====' missing right side translation.
ERROR: language file line 'CHECKING FOR UPDATES====' missing right side translation.
ERROR: language file line 'UPDATE AVAILABLE====' missing right side translation.
ERROR: language file line 'UPDATE X-PLANE NOW====' missing right side translation.
ERROR: language file line 'UPDATE FAILED====' missing right side translation.
ERROR: language file line 'Checking the web for the latest version of X-Plane...====' missing right side translation.
ERROR: language file line 'An X-Plane update is available!====' missing right side translation.
ERROR: language file line 'Updates include new features, improvements to existing features, and bug fixes. We encourage all users to update in order to get the most complete, powerful simulator available.====' missing right side translation.
ERROR: language file line 'If you choose not to update now, you can always do so later from the Settings > General > About X-Plane screen.====' missing right side translation.
ERROR: language file line 'The installer has finished downloading.====' missing right side translation.
ERROR: language file line 'When you click “Update X-Plane Now,†X-Plane will launch the installer and update to the latest version.====' missing right side translation.
ERROR: language file line 'There was an error downloading the installer.====' missing right side translation.
ERROR: language file line 'X-Plane is up to date; you already have the latest version of the simulator.====' missing right side translation.
ERROR: language file line 'Update to the Latest Beta====' missing right side translation.
ERROR: language file line 'Update X-Plane Now====' missing right side translation.
ERROR: language file line 'Ignore====' missing right side translation.
ERROR: language file line 'ADD OR REMOVE SCENERY====' missing right side translation.
ERROR: language file line 'DOWNLOADING INSTALLER====' missing right side translation.
ERROR: language file line 'ADD OR REMOVE SCENERY NOW====' missing right side translation.
ERROR: language file line 'FAILED TO DOWNLOAD INSTALLER====' missing right side translation.
ERROR: language file line 'Checking the web for the latest X-Plane installer...====' missing right side translation.
ERROR: language file line 'Would you like to add or remove scenery now?====' missing right side translation.
ERROR: language file line 'X-Plane can automatically download the latest installer from the web and run it for you so that you can change your scenery installation.====' missing right side translation.
ERROR: language file line 'When you click “Add or Remove Scenery Now,†X-Plane will launch the installer and allow you to change your scenery installation.====' missing right side translation.
ERROR: language file line 'Add or Remove Scenery Now====' missing right side translation.
ERROR: language file line 'Dismiss====' missing right side translation.
ERROR: language file line 'Your X-Plane installation appears to be incomplete (perhaps because you previously installed the demo, then later purchased the full version).====' missing right side translation.
ERROR: language file line 'Would you like to complete your installation now?====' missing right side translation.
ERROR: language file line 'X-Plane can automatically download the latest installer from the web and run it so that you can complete the installation.====' missing right side translation.
ERROR: language file line 'When you click “Complete Installation Now,†X-Plane will launch the installer and begin installing your missing files.====' missing right side translation.
ERROR: language file line 'Complete Installation Now====' missing right side translation.
ERROR: language file line 'This selection is used to send arbitrary data items (selected in the Data Output tab of this window) to another machine on your local network.====' missing right side translation.
ERROR: language file line 'Send data output to another machine on the network====' missing right side translation.
ERROR: language file line 'This selection is used to send forward-looking infrared (FLIR) imagery, used by various other apps, to another machine on your local network.====' missing right side translation.
ERROR: language file line 'Send FLIR imagery to another machine on the network====' missing right side translation.
ERROR: language file line 'Use this section to set other simulators on your local network to act as this machine’s external visuals. Those other computers will then act as extensions of this machine’s displays.====' missing right side translation.
ERROR: language file line 'Each external visual can either have its view locked to this machine’s (useful for linking together many computers to show the scenery), or its view can be independent of this machine (useful if you want to have one machine always display your instrument panel, for instance, even when your master machine is in an external view).====' missing right side translation.
ERROR: language file line 'MACHINES WHOSE VIEW IS LOCKED TO OURS====' missing right side translation.
ERROR: language file line 'Add External Visuals Machine (Locked View)====' missing right side translation.
ERROR: language file line 'MACHINES WHOSE VIEW IS INDEPENDENT FROM OURS====' missing right side translation.
ERROR: language file line 'Add External Visuals Machine (Independent View)====' missing right side translation.
ERROR: language file line 'Transmissions per second====' missing right side translation.
ERROR: language file line 'Use this section to set another simulator on your local network to act as this machine’s master simulator, so that this machine will act as an extension of the master simulator’s displays.====' missing right side translation.
ERROR: language file line 'You can configure this machine’s view relative to the master using the Graphics tab above.====' missing right side translation.
ERROR: language file line 'If you want a suffix to always be added to the end of the aircraft folders we open on this computer, check this box and enter the suffix below. This is useful if you have two aircraft models, one with the pilot-side cockpit and the other with the copilot-side cockpit, with “Aircraft Folder\\My Aircraft.acf†on the master computer, and “Aircraft Folder-copilot\\My Aircraft.acf†on an external cockpit, for example. In that case, you would enter “-copilot†as the suffix (on the external cockpit computer only).====' missing right side translation.
ERROR: language file line 'Use aircraft from suffixed folder====' missing right side translation.
ERROR: language file line 'Aircraft folder suffix====' missing right side translation.
ERROR: language file line 'IP Address====' missing right side translation.
ERROR: language file line 'Port====' missing right side translation.
ERROR: language file line 'Custom====' missing right side translation.
ERROR: language file line 'Use this section to configure an IOS on your local network to control this machine.====' missing right side translation.
ERROR: language file line 'Allow a networked IOS to control this machine====' missing right side translation.
ERROR: language file line 'Use this section to make this machine an IOS for another copy of X-Plane on your local network.====' missing right side translation.
ERROR: language file line 'Add Simulator to Control====' missing right side translation.
ERROR: language file line 'XAVION OR FLYQ====' missing right side translation.
ERROR: language file line 'Xavion and FlyQ can receive AHRS and ADS-B positional data from X-Plane, allowing you to use those apps with your simulator as though you were sitting in a real cockpit.====' missing right side translation.
ERROR: language file line 'Add Connection to Xavion or FlyQ====' missing right side translation.
ERROR: language file line 'FOREFLIGHT, WINGX PRO, OR SKYDEMON====' missing right side translation.
ERROR: language file line 'These apps can receive AHRS data from X-Plane, allowing you to use those apps with your simulator as though you were sitting in a real cockpit.====' missing right side translation.
ERROR: language file line 'Broadcast to all copies of ForeFlight, WingX Pro, and SkyDemon on the network====' missing right side translation.
ERROR: language file line 'Transmit to a single copy of ForeFlight, WingX Pro, and SkyDemon on the network====' missing right side translation.
ERROR: language file line 'X-PLANE CONTROL PAD====' missing right side translation.
ERROR: language file line 'X-Plane Control Pad is a free iPhone & iPad app from the creators of X-Plane which serves as a professional-level Instructor Operating Station controlling your desktop copy of X-Plane.====' missing right side translation.
ERROR: language file line 'Use Control Pad as an IOS====' missing right side translation.
ERROR: language file line 'LEGACY APPS====' missing right side translation.
ERROR: language file line 'X-PLANE REMOTE====' missing right side translation.
ERROR: language file line 'Use this section to configure a copy of the (discontinued) X-Plane Remote app, allowing it to act as a joystick for this simulator.====' missing right side translation.
ERROR: language file line 'Use X-Plane Remote as a joystick====' missing right side translation.
ERROR: language file line 'EFIS APP====' missing right side translation.
ERROR: language file line 'Use this section to configure a copy of the (discontinued) EFIS App, allowing it to act as a flight display for this simulator.====' missing right side translation.
ERROR: language file line 'Add Connection to EFIS App====' missing right side translation.
ERROR: language file line 'Add other simulators on your local network here to fly together. You can race, fly in formation, and more in this mode.====' missing right side translation.
ERROR: language file line 'Add Multiplayer Machine====' missing right side translation.
ERROR: language file line 'Port we receive on====' missing right side translation.
ERROR: language file line 'Port we send from====' missing right side translation.
ERROR: language file line 'Port we send to iPhone & iPad devices from====' missing right side translation.
ERROR: language file line 'Reset UDP Ports====' missing right side translation.
ERROR: language file line 'All====' missing right side translation.
ERROR: language file line 'Essentials====' missing right side translation.
ERROR: language file line 'Currently Assigned====' missing right side translation.
ERROR: language file line 'Plugin Provided====' missing right side translation.
ERROR: language file line 'Operation====' missing right side translation.
ERROR: language file line 'Nav Radios====' missing right side translation.
ERROR: language file line 'Annunciators====' missing right side translation.
ERROR: language file line 'Checklists====' missing right side translation.
ERROR: language file line 'Views====' missing right side translation.
ERROR: language file line 'Select a category of commands to browse on the left, or use the search box to search all commands.====' missing right side translation.
ERROR: language file line 'No commands found.====' missing right side translation.
ERROR: language file line 'Your search did not match any commands. Try a different search term, or click a category to the left to browse commands instead.====' missing right side translation.
ERROR: language file line 'CONFLICTING KEY ASSIGNMENT====' missing right side translation.
ERROR: language file line 'CONFLICTING BUTTON ASSIGNMENT====' missing right side translation.
ERROR: language file line 'Button %d is already bound to the command \"%s\"\n\nPress OK to remove this old binding and assign Button %d to \"%s\"====' missing right side translation.
ERROR: language file line 'CONFLICTING HAT SWITCH ASSIGNMENT====' missing right side translation.
ERROR: language file line 'Flight Reset====' missing right side translation.
ERROR: language file line 'Developer====' missing right side translation.
ERROR: language file line 'Basics====' missing right side translation.
ERROR: language file line 'Starters====' missing right side translation.
ERROR: language file line 'Throttle====' missing right side translation.
ERROR: language file line 'Beta====' missing right side translation.
ERROR: language file line 'Thrust Reverse====' missing right side translation.
ERROR: language file line 'Propeller====' missing right side translation.
ERROR: language file line 'Mixture====' missing right side translation.
ERROR: language file line 'Magnetos====' missing right side translation.
ERROR: language file line 'Igniter====' missing right side translation.
ERROR: language file line 'Cowl Flaps====' missing right side translation.
ERROR: language file line 'Shut Down====' missing right side translation.
ERROR: language file line 'Fire Extinguisher====' missing right side translation.
ERROR: language file line 'Generator====' missing right side translation.
ERROR: language file line 'Alternate Air====' missing right side translation.
ERROR: language file line 'Trim====' missing right side translation.
ERROR: language file line 'Lights====' missing right side translation.
ERROR: language file line 'Avionics====' missing right side translation.
ERROR: language file line 'Pressurization====' missing right side translation.
ERROR: language file line 'De-Ice====' missing right side translation.
ERROR: language file line 'Other Systems====' missing right side translation.
ERROR: language file line 'Deployment====' missing right side translation.
ERROR: language file line 'Doors====' missing right side translation.
ERROR: language file line 'Glider====' missing right side translation.
ERROR: language file line 'Miscellaneous====' missing right side translation.
ERROR: language file line 'Navigation & Radios====' missing right side translation.
ERROR: language file line 'NAV Radios====' missing right side translation.
ERROR: language file line 'Power====' missing right side translation.
ERROR: language file line 'RMI====' missing right side translation.
ERROR: language file line 'COM Radios====' missing right side translation.
ERROR: language file line 'ADF====' missing right side translation.
ERROR: language file line 'Transponder====' missing right side translation.
ERROR: language file line 'Audio Panel====' missing right side translation.
ERROR: language file line 'ECAM====' missing right side translation.
ERROR: language file line 'OBS, HSI, & ADF Card====' missing right side translation.
ERROR: language file line 'Indicators====' missing right side translation.
ERROR: language file line 'GPS====' missing right side translation.
ERROR: language file line 'Change View Mode====' missing right side translation.
ERROR: language file line 'Manipulate View====' missing right side translation.
ERROR: language file line 'Quick Look====' missing right side translation.
ERROR: language file line 'Flight Visualization====' missing right side translation.
ERROR: language file line 'View Tools====' missing right side translation.
ERROR: language file line 'Checklist====' missing right side translation.
ERROR: language file line 'Record button press====' missing right side translation.
ERROR: language file line 'Record keystroke(s)====' missing right side translation.
ERROR: language file line 'Dataref====' missing right side translation.
ERROR: language file line 'Read This Dataref====' missing right side translation.
ERROR: language file line 'Write This Dataref====' missing right side translation.
ERROR: language file line 'No datarefs found.====' missing right side translation.
ERROR: language file line 'Reading====' missing right side translation.
ERROR: language file line 'Writing====' missing right side translation.
ERROR: language file line 'DATA SOURCES====' missing right side translation.
ERROR: language file line 'Send data to (and receive data from):====' missing right side translation.
ERROR: language file line 'Networked computer====' missing right side translation.
ERROR: language file line 'A COM port====' missing right side translation.
ERROR: language file line 'COM port to use:====' missing right side translation.
ERROR: language file line 'Baud rate:====' missing right side translation.
ERROR: language file line 'bits per second====' missing right side translation.
ERROR: language file line 'Datarefs will be written and read as $ + comma-separated strings.====' missing right side translation.
ERROR: language file line 'Skip Axis====' missing right side translation.
ERROR: language file line 'Skipped====' missing right side translation.
ERROR: language file line 'No metrics found.====' missing right side translation.
ERROR: language file line 'Your search did not match any outputtable simulation metrics. Try a different search term, or clear your search to browse all available metrics.====' missing right side translation.
ERROR: language file line 'Enable groups:====' missing right side translation.
ERROR: language file line 'In Cockpit During Flight====' missing right side translation.
ERROR: language file line 'Uncheck this to disable all data output on the screen during flight.====' missing right side translation.
ERROR: language file line 'Data Graph Window====' missing right side translation.
ERROR: language file line 'Uncheck this to disable all data output to the data graph window.====' missing right side translation.
ERROR: language file line 'Network via UDP====' missing right side translation.
ERROR: language file line 'Uncheck this to disable all data output over the network via UDP.====' missing right side translation.
ERROR: language file line 'Disk (data.txt)====' missing right side translation.
ERROR: language file line 'Uncheck this to disable all data output to the data.txt file.====' missing right side translation.
ERROR: language file line 'UDP Rate====' missing right side translation.
ERROR: language file line 'packets/sec====' missing right side translation.
ERROR: language file line 'Disk Rate====' missing right side translation.
ERROR: language file line 'writes/sec====' missing right side translation.
ERROR: language file line 'Rotors flight model (detailed, in-cockpit only)====' missing right side translation.
ERROR: language file line 'Propellers flight model (detailed, in-cockpit only)====' missing right side translation.
ERROR: language file line 'Wings flight model (detailed, in-cockpit only)====' missing right side translation.
ERROR: language file line 'Stabilizers & other control surfaces flight model (detailed, in-cockpit only)====' missing right side translation.
ERROR: language file line 'Index====' missing right side translation.
ERROR: language file line 'Data to Output====' missing right side translation.
ERROR: language file line 'Disk (data.txt File)====' missing right side translation.
ERROR: language file line 'Show in Cockpit====' missing right side translation.
ERROR: language file line 'Use same scale for all data====' missing right side translation.
ERROR: language file line 'Amount of time to show====' missing right side translation.
ERROR: language file line 'seconds====' missing right side translation.
ERROR: language file line 'Zoom====' missing right side translation.
ERROR: language file line 'Start time====' missing right side translation.
ERROR: language file line 'Clear All Data Selections====' missing right side translation.
ERROR: language file line 'Hat Switch====' missing right side translation.
ERROR: language file line 'Next====' missing right side translation.
ERROR: language file line 'Leave your controls in their centered position until the timer is up.====' missing right side translation.
ERROR: language file line 'CENTER ALL CONTROLS====' missing right side translation.
ERROR: language file line 'Done!====' missing right side translation.
ERROR: language file line 'Let go of your controls, allowing them to go back to their centered position.====' missing right side translation.
ERROR: language file line 'Then, hit the Next button and leave your controls there until the timer is up.====' missing right side translation.
ERROR: language file line 'This will let X-Plane determine your controls’ center.====' missing right side translation.
ERROR: language file line 'Move each axis of your device through its full range of motion.====' missing right side translation.
ERROR: language file line 'UNCALIBRATED JOYSTICK OR YOKE FOUND====' missing right side translation.
ERROR: language file line 'Uncalibrated input devices have been found. Would you like to configure them now?====' missing right side translation.
ERROR: language file line 'UNCALIBRATED DEVICES FOUND====' missing right side translation.
ERROR: language file line 'Open Joystick Calibration====' missing right side translation.
ERROR: language file line 'General Data Output====' missing right side translation.
ERROR: language file line 'Dataref Read/Write====' missing right side translation.
ERROR: language file line 'LANGUAGE====' missing right side translation.
ERROR: language file line 'Restart X-Plane to apply changes.====' missing right side translation.
ERROR: language file line 'WARNINGS====' missing right side translation.
ERROR: language file line 'Give in-cockpit text warnings====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will give you yellow text warnings of any serious non-obvious problems in the upper-right of the screen.====' missing right side translation.
ERROR: language file line 'Warn about missing scenery====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will warn you if you try to fly to an area where you have no scenery installed.====' missing right side translation.
ERROR: language file line 'Warn about low frame rate====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will warn you if your frame rate gets too low.====' missing right side translation.
ERROR: language file line 'Require confirmation of warnings====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will require you to confirmation all warnings (by hitting the Enter key) on external visual machines.====' missing right side translation.
ERROR: language file line 'Notify me about new updates to X-Plane====' missing right side translation.
ERROR: language file line 'FLIGHT MODEL====' missing right side translation.
ERROR: language file line 'Flight Model Precision====' missing right side translation.
ERROR: language file line 'Double precision is recommended for most situations, but you may want higher precision if your frame rate is very slow, or you’re flying extremely small, fast, or light aircraft.====' missing right side translation.
ERROR: language file line 'Show clickable regions in the cockpit====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will draw a box around areas of the cockpit you can use the mouse to interact with.====' missing right side translation.
ERROR: language file line 'Show instrument instructions in the cockpit====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will describe what certain instruments in the cockpit do when you hover over them with the mouse.====' missing right side translation.
ERROR: language file line 'Show ATC taxi arrows====' missing right side translation.
ERROR: language file line 'With this checked, X-Plane will draw arrows showing where air traffic control has cleared you to taxi.====' missing right side translation.
ERROR: language file line 'DATA====' missing right side translation.
ERROR: language file line 'Output network data to Log.txt====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will dump its internet I/O to the Log.txt file. This is useful for seeing what data X-Plane is sending and receiving.====' missing right side translation.
ERROR: language file line 'Output untranslated strings to “Untranslated Strings.txtâ€====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will dump any un-translated strings that it finds to Untranslated Strings.txt... You can then copy those to the appropriate resources/text/ file and translate them! (Be sure to go through every window in X-Plane, Plane-Maker, and Airfoil-Maker first to expose all the strings that you might want translated!)====' missing right side translation.
ERROR: language file line 'Send anonymous usage data to Laminar Research====' missing right side translation.
ERROR: language file line 'This sends anonymous data about how you use X-Plane (which planes you use, where you fly, etc.) to Laminar Research, so we can improve the usability of X-Plane.====' missing right side translation.
ERROR: language file line 'Learn more====' missing right side translation.
ERROR: language file line 'Click here to learn about our data collection privacy policy.====' missing right side translation.
ERROR: language file line 'About X-Plane====' missing right side translation.
ERROR: language file line 'DAMAGE====' missing right side translation.
ERROR: language file line 'Remove gear doors if you are over Vle====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will remove your landing gear doors if you have the gear down above the maximum gear extension speed (Vle).====' missing right side translation.
ERROR: language file line 'Remove flaps if you are over Vfe====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will remove your flaps if you have the flaps down above the maximum flap extension speed (Vfe, the high-end of the white arc on the airspeed indicator.====' missing right side translation.
ERROR: language file line 'Reset to the nearest airport when you wreck====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will reset your craft to the nearest airport if you hit the ground hard enough to be considered a fatal accident.====' missing right side translation.
ERROR: language file line 'Remove flying surfaces if you are overspeed====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will shed certain flying surfaces if you overspeed your plane.====' missing right side translation.
ERROR: language file line 'Remove flying surfaces if your are over G====' missing right side translation.
ERROR: language file line 'If this is on, X-Plane will shed certain flying surfaces if you put too much G force on your plane.====' missing right side translation.
ERROR: language file line '%dx precision====' missing right side translation.
ERROR: language file line 'Number of Objects====' missing right side translation.
ERROR: language file line 'Increasing this slider will increase the number of objects drawn in the simulated world. This primarily impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation.
ERROR: language file line 'Visual Effects====' missing right side translation.
ERROR: language file line 'Increasing this slider will increase the quality of the visual effects used in the simulated world. This primarily impacts your graphics card, so if you have a very powerful graphics card, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation.
ERROR: language file line ' (Customized)====' missing right side translation.
ERROR: language file line 'Number of World Objects====' missing right side translation.
ERROR: language file line 'Increasing this slider will increase the number of objects drawn in the simulated world. This impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation.
ERROR: language file line 'Number of Airport Objects====' missing right side translation.
ERROR: language file line 'Increasing this slider will increase the number of objects drawn at airports. This impacts your CPU usage, so if you have a very powerful CPU, you can set this to High or even Max without impacting your frame rate too much.====' missing right side translation.
ERROR: language file line 'Use Vsync====' missing right side translation.
ERROR: language file line 'Check this to limit the frame rate of X-Plane to the refresh rate of your monitor. This will stabilize the frame rate (preventing brief drops in frame rate which can be perceived as “stuttersâ€) if you are running X-Plane at a very high frame rate.====' missing right side translation.
ERROR: language file line 'Texture Quality====' missing right side translation.
ERROR: language file line 'Increasing this slider will increase the texture quality of the cockpit & other objects in the world. If your graphics card has a lot of VRAM, you can increase this without impacting your frame rate (and if you see a sharp dropoff in frame rate, you know you’ve gone too far).====' missing right side translation.
ERROR: language file line 'Antialiasing====' missing right side translation.
ERROR: language file line 'Antialiasing smooths out jagged edges on objects drawn in the simulator. This impacts your graphics card, so if you have a very powerful graphics card, you can set this to 4x or even higher without impacting your frame rate too much.====' missing right side translation.
ERROR: language file line 'RENDERING OPTIONS====' missing right side translation.
ERROR: language file line 'MONITOR CONFIGURATION====' missing right side translation.
ERROR: language file line 'Show advanced options====' missing right side translation.
ERROR: language file line 'STABILITY AUGMENTATION====' missing right side translation.
ERROR: language file line 'Pitch====' missing right side translation.
ERROR: language file line 'Roll====' missing right side translation.
ERROR: language file line 'Yaw====' missing right side translation.
ERROR: language file line 'In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add “auto-control†displacements to stabilize the plane. It isn’t realistic, but may make the plane feel more realistic.====' missing right side translation.
ERROR: language file line 'No====' missing right side translation.
ERROR: language file line 'Max====' missing right side translation.
ERROR: language file line 'CONTROL RESPONSE====' missing right side translation.
ERROR: language file line 'These sliders allow you to get more joystick resolution when your controls are near the center of their travel.====' missing right side translation.
ERROR: language file line 'Full linear; no enhanced joystick responsiveness====' missing right side translation.
ERROR: language file line 'UNCALIBRATED DEVICE====' missing right side translation.
ERROR: language file line 'Calibrate Now====' missing right side translation.
ERROR: language file line 'AXES====' missing right side translation.
ERROR: language file line 'BUTTONS====' missing right side translation.
ERROR: language file line 'Device====' missing right side translation.
ERROR: language file line 'Calibrate====' missing right side translation.
ERROR: language file line 'No flight controls found.====' missing right side translation.
ERROR: language file line 'X-Plane could not find any joystick, yoke, pedals, or throttle quadrants.====' missing right side translation.
ERROR: language file line 'Make sure to plug in your flight hardware before launching X-Plane, and make sure your operating system recognizes the controls.====' missing right side translation.
ERROR: language file line 'DEVICE DISCONNECTED====' missing right side translation.
ERROR: language file line 'The device \"%s\" appears to be unplugged. To continue editing its configuration, please reconnect it to your computer.====' missing right side translation.
ERROR: language file line 'Stability Augmentation====' missing right side translation.
ERROR: language file line 'Control Response====' missing right side translation.
ERROR: language file line 'Reset Keyboard Bindings to Default====' missing right side translation.
ERROR: language file line 'ALL KEYBOARD CONFIGURATION WILL BE RESET====' missing right side translation.
ERROR: language file line 'Clicking “Reset All Keyboard Configuration†below will undo any key bindings you have made and reconfigure X-Plane to use the default keyboard shortcuts.\n\nIf this was not your intention, click Cancel.====' missing right side translation.
ERROR: language file line 'Reset All Keyboard Configuration====' missing right side translation.
ERROR: language file line 'CONFIGURATION ERROR(S)====' missing right side translation.
ERROR: language file line 'The networking system is configured to send data output, but no data was sent. (Perhaps you haven’t selected any items to send over the network in the Data Output tab?)====' missing right side translation.
ERROR: language file line 'The networking system is configured to send FLIR imagery, but no data was sent.====' missing right side translation.
ERROR: language file line 'SENDING DATA TO====' missing right side translation.
ERROR: language file line 'RECEIVING DATA FROM====' missing right side translation.
ERROR: language file line 'THIS MACHINE’S IP ADDRESSES====' missing right side translation.
ERROR: language file line 'This machine's role====' missing right side translation.
ERROR: language file line 'UDP PORTS====' missing right side translation.
ERROR: language file line 'MASTER MACHINE====' missing right side translation.
ERROR: language file line '(1 connection)====' missing right side translation.
ERROR: language file line '(In use)====' missing right side translation.
ERROR: language file line 'No incoming data.====' missing right side translation.
ERROR: language file line 'No outgoing data.====' missing right side translation.
ERROR: language file line 'Failed====' missing right side translation.
ERROR: language file line 'Time Since Last Communication====' missing right side translation.
ERROR: language file line 'unknown IP====' missing right side translation.
ERROR: language file line 'All devices on the network running ForeFlight, WingX Pro, or SkyDemon====' missing right side translation.
ERROR: language file line 'Reset Networking Configuration====' missing right side translation.
ERROR: language file line 'ALL NETWORKING CONFIGURATION WILL BE RESET====' missing right side translation.
ERROR: language file line 'Clicking “Reset All Networking Configuration†below will undo any setup changes you have made and reconfigure this machine to the default networking settings.\n\nIf this was not your intention, click Cancel.====' missing right side translation.
ERROR: language file line 'Reset All Networking Configuration====' missing right side translation.
ERROR: language file line 'VOLUME====' missing right side translation.
ERROR: language file line 'Enable sounds====' missing right side translation.
ERROR: language file line 'Propellers====' missing right side translation.
ERROR: language file line 'Ground Contact====' missing right side translation.
ERROR: language file line 'Warning Systems====' missing right side translation.
ERROR: language file line 'COM Radio====' missing right side translation.
ERROR: language file line 'Avionics Fan====' missing right side translation.
ERROR: language file line 'AIR TRAFFIC CONTROL====' missing right side translation.
ERROR: language file line 'Enable text ATC messages====' missing right side translation.
ERROR: language file line 'Enable verbal ATC messages====' missing right side translation.
ERROR: language file line 'SYSTEM INFORMATION====' missing right side translation.
ERROR: language file line 'Speech synthesis for ATIS/AWOS IS installed on this machine.====' missing right side translation.
ERROR: language file line 'Speech synthesis for ATIS/AWOS is not installed on this machine.====' missing right side translation.
ERROR: language file line 'To install speech synthesis (if you want to hear air traffic control verbally), simply run your Mac OS System Installer, select 'custom install', and install only speech synthesis capabilities.====' missing right side translation.
ERROR: language file line 'To install speech synthesis (if you want to hear air traffic control verbally), go to microsoft.com/downloads/ and search for Speech SDK 5.1.====' missing right side translation.
ERROR: language file line 'Other Controls====' missing right side translation.
ERROR: language file line 'No image available====' missing right side translation.
ERROR: language file line 'MAIN MONITOR====' missing right side translation.
ERROR: language file line 'Resolution====' missing right side translation.
ERROR: language file line '×====' missing right side translation.
ERROR: language file line 'VISUALS SETTINGS====' missing right side translation.
ERROR: language file line 'Default view====' missing right side translation.
ERROR: language file line 'Lock view to default====' missing right side translation.
ERROR: language file line 'If this is checked, no view changes will be allowed. You will be unable to get to an external view, or to manipulate your view by looking around.====' missing right side translation.
ERROR: language file line 'Allow windshield effects====' missing right side translation.
ERROR: language file line 'This enables effects that appear on the windshield, such as rain and bird strikes. You might want to disable this on some installations with projectors.====' missing right side translation.
ERROR: language file line 'Reset Visuals Settings====' missing right side translation.
ERROR: language file line 'FIELD OF VIEW====' missing right side translation.
ERROR: language file line 'Lateral field of view====' missing right side translation.
ERROR: language file line 'Use non-proportional vertical field of view====' missing right side translation.
ERROR: language file line 'Vertical field of view====' missing right side translation.
ERROR: language file line 'Reset FOV====' missing right side translation.
ERROR: language file line 'VISUAL OFFSETS====' missing right side translation.
ERROR: language file line 'Configure as====' missing right side translation.
ERROR: language file line 'Lateral offset====' missing right side translation.
ERROR: language file line 'Vertical offset====' missing right side translation.
ERROR: language file line 'Use this offset mode for a flat “wall†of monitors.====' missing right side translation.
ERROR: language file line 'Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side, or -2/0/+2 for three screens in a row.====' missing right side translation.
ERROR: language file line 'Roll offset====' missing right side translation.
ERROR: language file line 'Use this offset mode for a monitors that are angled around you.====' missing right side translation.
ERROR: language file line 'Roll offsets are typically used when using a monitor turned sideways.====' missing right side translation.
ERROR: language file line 'FLAT====' missing right side translation.
ERROR: language file line 'WRAPAROUND====' missing right side translation.
ERROR: language file line 'Unused====' missing right side translation.
ERROR: language file line 'Full Screen Simulator====' missing right side translation.
ERROR: language file line 'Windowed Simulator====' missing right side translation.
ERROR: language file line 'Instructor Operating Station====' missing right side translation.
ERROR: language file line 'Forward with scenery====' missing right side translation.
ERROR: language file line 'Forward with HUD====' missing right side translation.
ERROR: language file line 'Forward with panel====' missing right side translation.
ERROR: language file line 'Forward with 3D cockpit====' missing right side translation.
ERROR: language file line 'ABOUT X-PLANE====' missing right side translation.
ERROR: language file line 'ABOUT THIS COPY OF X-PLANE====' missing right side translation.
ERROR: language file line 'FREE UPDATE AVAILABLE====' missing right side translation.
ERROR: language file line 'A new update is available for X-Plane.====' missing right side translation.
ERROR: language file line 'Update to Latest Beta====' missing right side translation.
ERROR: language file line 'DOWNLOADING UPDATE...====' missing right side translation.
ERROR: language file line 'READY TO UPDATE====' missing right side translation.
ERROR: language file line 'The installer is ready to update!====' missing right side translation.
ERROR: language file line 'Update Now====' missing right side translation.
ERROR: language file line 'ERROR UPDATING X-PLANE====' missing right side translation.
ERROR: language file line 'Your copy of X-Plane is up to date; you have the latest version.====' missing right side translation.
ERROR: language file line 'CREDITS====' missing right side translation.
ERROR: language file line 'CREATED BY====' missing right side translation.
ERROR: language file line 'PROJECT MANAGER====' missing right side translation.
ERROR: language file line 'OTHER DEVELOPERS====' missing right side translation.
ERROR: language file line 'SCENERY ELEVATION & LAND CLASS====' missing right side translation.
ERROR: language file line 'SCENERY TEXTURES & FORESTS====' missing right side translation.
ERROR: language file line 'AUTOGEN, ROADS, & URBAN TERRAIN ART====' missing right side translation.
ERROR: language file line 'SOURCE PHOTOGRAPHY====' missing right side translation.
ERROR: language file line 'RENDERING ART====' missing right side translation.
ERROR: language file line 'AIRPLANES & SKY COLORS====' missing right side translation.
ERROR: language file line 'AIRPLANES & AIRPORTS====' missing right side translation.
ERROR: language file line 'AIRPORT & NAVAID DATA====' missing right side translation.
ERROR: language file line 'LINUX PORT====' missing right side translation.
ERROR: language file line 'TESTING & DOCUMENTATION====' missing right side translation.
ERROR: language file line 'INSTRUMENT APPROACH DATA====' missing right side translation.
ERROR: language file line 'LEGAL====' missing right side translation.
ERROR: language file line 'X-Plane uses free airspace data from SoaringWeb.com====' missing right side translation.
ERROR: language file line 'X-Plane uses FreeType to render fonts. See FreeType.org for more information.====' missing right side translation.
ERROR: language file line 'Privacy Policy====' missing right side translation.
ERROR: language file line 'Copyright & Licensing====' missing right side translation.
ERROR: language file line 'DIFFICULTY====' missing right side translation.
ERROR: language file line 'SCORE====' missing right side translation.
ERROR: language file line 'General Aviation====' missing right side translation.
ERROR: language file line 'Airliners====' missing right side translation.
ERROR: language file line 'Navigation====' missing right side translation.
ERROR: language file line 'Helicopters====' missing right side translation.
ERROR: language file line 'Fighters====' missing right side translation.
ERROR: language file line 'Other====' missing right side translation.
ERROR: language file line 'Because you changed your aircraft, we will end your current flight and start a new one as you configured it. Is this what you want?====' missing right side translation.
ERROR: language file line 'Because you changed your location, we will end your current flight and start a new one as you configured it. Is this what you want?====' missing right side translation.
ERROR: language file line 'END CURRENT FLIGHT?====' missing right side translation.
ERROR: language file line 'Start New Flight====' missing right side translation.
ERROR: language file line 'Discard Changes====' missing right side translation.
ERROR: language file line 'Resume Flight====' missing right side translation.
ERROR: language file line 'Start Flight====' missing right side translation.
ERROR: language file line 'Open Saved Flight Not Listed====' missing right side translation.
ERROR: language file line 'Choose a saved flight file to open.====' missing right side translation.
ERROR: language file line 'UNKNOWN FILE FORMAT====' missing right side translation.
ERROR: language file line 'X-Plane cannot load the file ‘%1:file name%’ because it does not have an extension we recognize. File extensions we recognize for saved flights are: .sit, .fdr, and .rep.====' missing right side translation.
ERROR: language file line 'Saved Flight====' missing right side translation.
ERROR: language file line 'File Location====' missing right side translation.
ERROR: language file line 'Date Saved====' missing right side translation.
ERROR: language file line 'No saved flights found.====' missing right side translation.
ERROR: language file line 'Select another category of saved flights to browse, or use the search box to search all saved flights.====' missing right side translation.
ERROR: language file line 'Your search did not match any saved flights.====' missing right side translation.
ERROR: language file line 'Xavion====' missing right side translation.
ERROR: language file line 'ABOUT THIS COPY====' missing right side translation.
ERROR: language file line 'Learn more at X-Plane.com.====' missing right side translation.
ERROR: language file line 'This copy is not approved for commercial applications.====' missing right side translation.
ERROR: language file line 'For commercial use, see x-plane.com/pro/.====' missing right side translation.
ERROR: language file line 'Report violations to austin@x-plane.com.====' missing right side translation.
ERROR: language file line 'DID YOU KNOW...====' missing right side translation.
ERROR: language file line 'Quit X-Plane====' missing right side translation.
ERROR: language file line 'Load Saved Flight====' missing right side translation.
ERROR: language file line 'Flight School====' missing right side translation.
ERROR: language file line 'Edit Flight====' missing right side translation.
ERROR: language file line 'New Flight====' missing right side translation.
ERROR: language file line 'Resume Current Flight====' missing right side translation.
ERROR: language file line 'Resume Last Flight====' missing right side translation.
ERROR: language file line 'Main Menu====' missing right side translation.
ERROR: language file line 'SAVE FLIGHT====' missing right side translation.
ERROR: language file line 'Format====' missing right side translation.
ERROR: language file line 'File Name====' missing right side translation.
ERROR: language file line 'Choose a location to save to.====' missing right side translation.
ERROR: language file line 'Graphics====' missing right side translation.
ERROR: language file line 'Network====' missing right side translation.
ERROR: language file line 'Data Output====' missing right side translation.
ERROR: language file line 'Settings====' missing right side translation.
ERROR: language file line 'END FLIGHT?====' missing right side translation.
ERROR: language file line 'Are you sure you wish to end this flight?====' missing right side translation.
ERROR: language file line 'YOU CRASHED!====' missing right side translation.
ERROR: language file line 'That had to hurt! Care to try again?====' missing right side translation.
ERROR: language file line 'MISSION COMPLETE====' missing right side translation.
ERROR: language file line 'You did it! Well done!\n\nWould you like to retry, or quit and try something else?====' missing right side translation.
ERROR: language file line 'Pause the simulator====' missing right side translation.
ERROR: language file line 'Toggle the ATC window====' missing right side translation.
ERROR: language file line 'Toggle the map====' missing right side translation.
ERROR: language file line 'Open the Settings window====' missing right side translation.
ERROR: language file line 'Open the Flight Configuration window====' missing right side translation.
ERROR: language file line 'Get instructions on flying the sim====' missing right side translation.
ERROR: language file line 'Get help for the current screen====' missing right side translation.
ERROR: language file line 'Open the Settings configuration====' missing right side translation.
ERROR: language file line 'X-Plane====' missing right side translation.
ERROR: language file line '|-Ground Acceleration Time: Take-Off====' missing right side translation.
ERROR: language file line 'airspeed, KCAS====' missing right side translation.
ERROR: language file line 'left thrust, lb====' missing right side translation.
ERROR: language file line 'right thrust, lb====' missing right side translation.
ERROR: language file line 'pressure alt, ft====' missing right side translation.
ERROR: language file line 'left brake, ratio====' missing right side translation.
ERROR: language file line 'right brake, ratio====' missing right side translation.
ERROR: language file line '|-Normal Climb: All Engines Operating====' missing right side translation.
ERROR: language file line 'vertical speed, fpm====' missing right side translation.
ERROR: language file line 'roll attitude, deg====' missing right side translation.
ERROR: language file line '|-Stall Warning: Climb====' missing right side translation.
ERROR: language file line 'AOA, deg====' missing right side translation.
ERROR: language file line 'stall warning, 0/1====' missing right side translation.
ERROR: language file line 'pitch attitude, deg====' missing right side translation.
ERROR: language file line 'pitch input, ratio====' missing right side translation.
ERROR: language file line '|-Stall Warning: Approach====' missing right side translation.
ERROR: language file line '|-Stopping Time: Dry Runway, Landing====' missing right side translation.
ERROR: language file line 'heading, deg true====' missing right side translation.
ERROR: language file line '|-Engine Acceleration: Approach====' missing right side translation.
ERROR: language file line 'left throttle, ratio====' missing right side translation.
ERROR: language file line 'left manifold press, in====' missing right side translation.
ERROR: language file line 'right throttle, ratio====' missing right side translation.
ERROR: language file line 'right manifold press, in====' missing right side translation.
ERROR: language file line '|-Engine Deceleration: Take-Off====' missing right side translation.
ERROR: language file line 'right manifold pressu, in====' missing right side translation.
ERROR: language file line '|-Column Position vs Force====' missing right side translation.
ERROR: language file line 'pitch force, lb====' missing right side translation.
ERROR: language file line '|-Wheel Position vs Force====' missing right side translation.
ERROR: language file line 'roll input, ratio====' missing right side translation.
ERROR: language file line 'roll force, lb====' missing right side translation.
ERROR: language file line '|-Rudder Position vs Force====' missing right side translation.
ERROR: language file line 'left pedal input, ratio====' missing right side translation.
ERROR: language file line 'right pedal input, ratio====' missing right side translation.
ERROR: language file line 'pedal force, lb====' missing right side translation.
ERROR: language file line '|-Rudder Steering Calibration====' missing right side translation.
ERROR: language file line 'nw-steer, deg====' missing right side translation.
ERROR: language file line '|-Brake Position vs Force====' missing right side translation.
ERROR: language file line 'left brake force, lb====' missing right side translation.
ERROR: language file line 'right brake force, lb====' missing right side translation.
ERROR: language file line '|-Power Change Dynamics: Cruise====' missing right side translation.
ERROR: language file line '|-Flap Change Dynamics: Take-Off====' missing right side translation.
ERROR: language file line 'flap, ratio====' missing right side translation.
ERROR: language file line '|-Flap Change Dynamics: Approach====' missing right side translation.
ERROR: language file line '|-Landing Gear Change Dynamics: Take-Off====' missing right side translation.
ERROR: language file line 'gear deploy====' missing right side translation.
ERROR: language file line '|-Flap Operating Time: Retract====' missing right side translation.
ERROR: language file line '|-Flap Operating Time: Extend====' missing right side translation.
ERROR: language file line '|-Gear Operating Time: Retract====' missing right side translation.
ERROR: language file line 'gear deploy, ratio====' missing right side translation.
ERROR: language file line '|-Gear Operating Time: Extend====' missing right side translation.
ERROR: language file line 'gear deploy,ratio====' missing right side translation.
ERROR: language file line '|-Longitudinal Static Stability: Approach====' missing right side translation.
ERROR: language file line '|-Longitudinal Trim: Cruise====' missing right side translation.
ERROR: language file line '|-Longitudinal Trim: Approach====' missing right side translation.
ERROR: language file line '|-Longitudinal Trim: Landing====' missing right side translation.
ERROR: language file line '|-Phugoid Dynamics: Cruise====' missing right side translation.
ERROR: language file line 'elevator def, ratio====' missing right side translation.
ERROR: language file line '|-Roll Response: Cruise====' missing right side translation.
ERROR: language file line 'roll rate, deg/sec====' missing right side translation.
ERROR: language file line 'beta, deg====' missing right side translation.
ERROR: language file line '|-Roll Response: Landing====' missing right side translation.
ERROR: language file line 'left aileron def, ratio====' missing right side translation.
ERROR: language file line 'right aileron def, ratio====' missing right side translation.
ERROR: language file line 'rudder def, ratio====' missing right side translation.
ERROR: language file line '|-Roll Step-Response: Approach====' missing right side translation.
ERROR: language file line 'roll atitude, deg====' missing right side translation.
ERROR: language file line '|-Spiral Stability: Cruise====' missing right side translation.
ERROR: language file line '|-Rudder Response: Landing====' missing right side translation.
ERROR: language file line 'left aileronr def, ratio====' missing right side translation.
ERROR: language file line 'right aileronr def, ratio====' missing right side translation.
ERROR: language file line '|-Dutch Roll: Cruise====' missing right side translation.
ERROR: language file line '|-Dutch Roll: Approach====' missing right side translation.
ERROR: language file line '|-Steady-State Sideslip: Landing====' missing right side translation.
ERROR: language file line '|-Transport Delay====' missing right side translation.
ERROR: language file line 'transport delay====' missing right side translation.
ERROR: language file line 'Data Output Graph====' missing right side translation.
ERROR: language file line 'Text File====' missing right side translation.
ERROR: language file line 'Logbook====' missing right side translation.
ERROR: language file line 'Map====' missing right side translation.
ERROR: language file line 'Instructor Operator Station (IOS)====' missing right side translation.
ERROR: language file line 'Nearby Air Traffic Controllers====' missing right side translation.
ERROR: language file line 'I will dump all the data for the next cycle of X-Plane to the file 'Cycle Dump.txt'.====' missing right side translation.
ERROR: language file line 'This will include all the angles of attack, forces, velocities, etc. for this instant in time.====' missing right side translation.
ERROR: language file line 'Quit X-Plane and open the file 'Cycle Dump.txt' with a word processor to read the resultant file.====' missing right side translation.
ERROR: language file line 'Be sure to turn off text-wrapping in your word processor or allow very wide text area for the file to look right.====' missing right side translation.
ERROR: language file line 'The aircraft must now be in trimmed, level flight. It must be in trimmed, level, un-accelerated flight BEFORE you select this menu-option.====' missing right side translation.
ERROR: language file line 'The controls should be centered, with the exception of any trim needed to hold level, un-accelerated flight. The autopilot MAY be on, since it will not have time to affect the test results.====' missing right side translation.
ERROR: language file line 'I shall now instantly displace the nose exactly 1 degree, and look at the instantaneous acceleration back to trim of the craft, before the autopilot can respond.====' missing right side translation.
ERROR: language file line 'By looking at that acceleration, I will know the stability derivative. I will output my findings to the end of the text file 'Cycle Dump.txt' for you to see.====' missing right side translation.
ERROR: language file line 'Loading the introduction to X-Plane.====' missing right side translation.
ERROR: language file line 'Would you like to send anonymous usage data to Laminar Research?  We use this information to improve X-Plane.====' missing right side translation.
ERROR: language file line 'You can change your decision at any time via the Operations and Warnings dialog box.====' missing right side translation.
ERROR: language file line '-center of gravity|-(inches from default) { An entry of 0 here, with 0 fuel and 0 ordnance, gives the CG that is listed as the DEFAULT CG in Plane-Maker. Fuel and ordnance load will offset you from the default CG according to their locations on the craft. In ADDITION to that, this entry offsets the entire loaded mass of the aircraft from default, as might be obtained with baggage or passengers.====' missing right side translation.
ERROR: language file line '-slung load weight|(lb)====' missing right side translation.
ERROR: language file line 'slung-load object| { Choose a slung load object here. It can by any X-Plane OBJ file. If the OBJ file has a weight value in it, then X-Plane will use that weight as the slung load weight. If you change the slung load weight after that, though, then X-Plane will revert back to its default cube slung-load object that scale's its size based on the carried weight.====' missing right side translation.
ERROR: language file line 'HTTP Proxy====' missing right side translation.
ERROR: language file line 'flight models per frame|2 is OK for most situations, more may be needed for fast, light, or small aircraft or low framerate! { X-Plane runs one or more flight models for each display frame. In every flight model, X-Plane integrates the forces on the airplane to compute new speed and position. The flight model is only accurate when the changes are relatively small, so that the resulting forces can accurately track the changes in the flight situation. One flight model per frame is adequate for a slow handling heavy. But if you're flying a small, quick handling airplane or a supersonic jet, you need a higher rate of flight models to track the airplane's behavior. If you have a low display frame rate because you have a slow computer or you have your scenery options cranked way up, you must run multiple flight models per display frame so the flight model can keep up. If you see rapid oscillation in flight, or the airplane suddenly tumbles out of control at high speed, or it slides or jumps uncontrollably on the ground, the flight model is not keeping up and you need to increase the flight models per frame setting.====' missing right side translation.
ERROR: language file line '|-start each flight on ramp { This lets you start each flight on the ramp, as opposed to the runway.====' missing right side translation.
ERROR: language file line '|-start each flight cold and dark { This lets you start cold and dark, so you have to do a full start-up.====' missing right side translation.
ERROR: language file line '|-discard changes to preferences { This discards any changes to your preferences, NOT saving preferences when you exit X-Plane!====' missing right side translation.
ERROR: language file line '|-require warning confirmation { Require a confirmation of warnings (by hitting the enter key) on the external visual machines.====' missing right side translation.
ERROR: language file line '|-automatically notify of updates { Automatically notify you of any updates to X-Plane====' missing right side translation.
ERROR: language file line '|-show ATC taxi instruction arrows { If this is on, X-Plane will draw arrows showing where ATC has cleared you to taxi.====' missing right side translation.
ERROR: language file line '|-dump time data to log.txt { If this is on, X-Plane will dump some time data log.txt. This is useful for seeing for fast X-Plane is running.====' missing right side translation.
ERROR: language file line '|-send usage data to Laminar Research { This sends anonymous data about which planes you fly to Laminar Research, so we can improve the usability of X-Plane/====' missing right side translation.
ERROR: language file line '|dump un-translated language-file strings to 'Untranslated Strings.txt' { Set X-Plane to a language OTHER THAN ENGLISH. OPEN EACH WINDOW. Open Untranslated Strings.txt. You can then copy strings to resources/text/ file and translate them.====' missing right side translation.
ERROR: language file line 'Learn More { Click here to learn about our data collection privacy policy.====' missing right side translation.
ERROR: language file line '-proxy host====' missing right side translation.
ERROR: language file line '|aircraft that will carry in the PIGGYBACK SHUTTLE option above====' missing right side translation.
ERROR: language file line '-your plane team red { ====' missing right side translation.
ERROR: language file line '-your plane team blue { ====' missing right side translation.
ERROR: language file line '-          |team gold { ====' missing right side translation.
ERROR: language file line 'This ATC system can take you to any towered airport... even custom ones that you design with World-Editor (available at develoer.x-plane.com)====' missing right side translation.
ERROR: language file line 'few====' missing right side translation.
ERROR: language file line '|-use Real-Weather and Winds-Aloft { This option will download a real weather file called 'METAR.RWX' from the net that contains actual current weather at thousands of airports across the world. This weather is recorded every hour, and can be used (with the option below) to set the weather in X-Plane to match the real world! As well, X-Plane now gets real winds-aloft!====' missing right side translation.
ERROR: language file line 'This is time in seconds from the beginning of the recording.====' missing right side translation.
ERROR: language file line 'radio altft====' missing right side translation.
ERROR: language file line ' hdng  TRUE====' missing right side translation.
ERROR: language file line 'Indicated rate-of-turn, degrees per second positive right.====' missing right side translation.
ERROR: language file line 'Stall warning, 0 to 1.====' missing right side translation.
ERROR: language file line 'Nav-1 type. NONE=0, NDB=2, VOR=3, LOC=5, ILS=10.====' missing right side translation.
ERROR: language file line 'Nav-2 type. NONE=0, NDB=2, VOR=3, LOC=5, ILS=10.====' missing right side translation.
ERROR: language file line '0.0 means no DME found... any positive value means we are getting DME data.====' missing right side translation.
ERROR: language file line ' baro in hg====' missing right side translation.
ERROR: language file line 'N1. This is also the % RPM for propeller ====' missing right side translation.
ERROR: language file line 'N2.====' missing right side translation.
ERROR: language file line ' prop cntrl====' missing right side translation.
ERROR: language file line ' prop   rpm====' missing right side translation.
ERROR: language file line 'Propeller RPM actual, per engine.====' missing right side translation.
ERROR: language file line ' prop   deg====' missing right side translation.
ERROR: language file line 'N1, per engine.====' missing right side translation.
ERROR: language file line 'N2, per engine.====' missing right side translation.
ERROR: language file line '  MPR  inch====' missing right side translation.
ERROR: language file line 'Engine Manifold Pressure, per engine.====' missing right side translation.
ERROR: language file line '  ITT deg C====' missing right side translation.
ERROR: language file line 'Turbine Inlet Temperature, per engine.====' missing right side translation.
ERROR: language file line 'Exhaust Gas Temperature, per engine.====' missing right side translation.
ERROR: language file line '  CHT deg C====' missing right side translation.
ERROR: language file line 'Cylinder Head Temperature, per engine.====' missing right side translation.
ERROR: language file line 'Out of range FDR-file longitude!====' missing right side translation.
ERROR: language file line 'Out of range FDR-file latitude! ====' missing right side translation.
ERROR: language file line '      COMM: any comment====' missing right side translation.
ERROR: language file line '      ACFT: the aircraft file to use, with directory path from X-Plane itself, for example: Aircraft/Heavy Metal/Boeing 747.acf====' missing right side translation.
ERROR: language file line '      TAIL: the tail number of the aircraft, for example: N8141Q. This line must come AFTER the ACFT line.====' missing right side translation.
ERROR: language file line '      TIME: the ZULU time of the beginning of the flight, for example: 18:54:32====' missing right side translation.
ERROR: language file line '      DATE: the date of the flight, for example: 03/05/02====' missing right side translation.
ERROR: language file line '      PRES: the sea-level pressure during the flight in inches HG, for example: 29.92====' missing right side translation.
ERROR: language file line '      TEMP: the sea-level temperature during the flight in degrees F, for example: 65====' missing right side translation.
ERROR: language file line '      WIND: the wind during the flight in degrees then knots, for example: 230,17====' missing right side translation.
ERROR: language file line '      CALI: the ACTUAL takeoff or touchdown longitude, latitude, and elevation in feet for calibration, for example: -118.34, 34.57, 456. This calibrates to X-Plane scenery.====' missing right side translation.
ERROR: language file line '      WARN: warning WAV file, with directory path from X-Plane itself, at a given time, for example: 10,aural_alarm.wav====' missing right side translation.
ERROR: language file line '      TEXT: spoken text to be read aloud by the computer at a given time, for example: 10,Copilot left the cockpit here.====' missing right side translation.
ERROR: language file line '      MARK: text marker to appear in the time slider at a given time, for example: 10,Approach began here.====' missing right side translation.
ERROR: language file line '      EVNT: flight path to be hilighted at a given time for the event duration, for example: 10,5====' missing right side translation.
ERROR: language file line '      DATA: a bunch of comma-delimited floating-point numbers, following the labels in the screen below.====' missing right side translation.
ERROR: language file line 'Move the mouse over any column to see its description.====' missing right side translation.
ERROR: language file line 'center on aircraft====' missing right side translation.
ERROR: language file line 'heading { This is the magnetic heading that the aircraft will be placed at if you click on the map.====' missing right side translation.
ERROR: language file line '|-track up====' missing right side translation.
ERROR: language file line 'show|NEXRAD====' missing right side translation.
ERROR: language file line 'show|wind 12K====' missing right side translation.
ERROR: language file line 'show|wind 34k====' missing right side translation.
ERROR: language file line 'show|airports====' missing right side translation.
ERROR: language file line 'show|NAVAIDS====' missing right side translation.
ERROR: language file line 'show|airways====' missing right side translation.
ERROR: language file line 'show|fixes====' missing right side translation.
ERROR: language file line 'show|aircraft====' missing right side translation.
ERROR: language file line 'radial: ====Radial:' does not have the same trailing spaces.
ERROR: language file line 'distance: ====Entfernung:' does not have the same trailing spaces.
ERROR: language file line 'Email Address|(Optional)====' missing right side translation.
ERROR: language file line 'Comments|(Optional)====' missing right side translation.
ERROR: language file line 'I could not save the file! Could the directory that the file sits in be missing? Or flagged as READ-ONLY by the operating system? (Windows machines typically do this).====' missing right side translation.
ERROR: language file line 'Could the file be flagged as read-only? This happens in Windows if you copy it from a CD!====' missing right side translation.
ERROR: language file line 'Try putting this app in the background and then flag the file as NOT read-only, or creating the folder listed in the path above.====' missing right side translation.
ERROR: language file line 'We were unable to open a zip file. It may be missing or damaged====' missing right side translation.
ERROR: language file line 'We were unable to read from a zip file (short-read error). It may be missing or damaged====' missing right side translation.
ERROR: language file line 'We were unable to create a zip file====' missing right side translation.
ERROR: language file line 'We were unable to write to a zip file. It may be missing or damaged====' missing right side translation.
ERROR: language file line 'We cannot compress a zip file because its source file resource fork is more than 2 GB. The source file is probably damaged====' missing right side translation.
ERROR: language file line 'We could not open a file to read from it====' missing right side translation.
ERROR: language file line 'We were unable to connct to the network due to an internal reconnect error====' missing right side translation.
ERROR: language file line 'We wre unable to connect to the network due to a bad state error====' missing right side translation.
ERROR: language file line 'We could not allocate a connection to the network====' missing right side translation.
ERROR: language file line 'We could not write the incoming file from the web to disk====' missing right side translation.
ERROR: language file line 'We could not find the server over the network====' missing right side translation.
ERROR: language file line 'Part of the downloaded zip file is corrupted (the resource fork header is bad)====' missing right side translation.
ERROR: language file line 'The installed file has corrupt contents.====' missing right side translation.
ERROR: language file line '7-Zip data error====' missing right side translation.
ERROR: language file line '7-Zip CRC error====' missing right side translation.
ERROR: language file line '7-Zip archive error====' missing right side translation.
ERROR: language file line '7-Zip is out of memory====' missing right side translation.
ERROR: language file line '7-zip unimplemented operation====' missing right side translation.
ERROR: language file line '7-zip failure====' missing right side translation.
ERROR: language file line '7-zip internal invalid argument====' missing right side translation.
ERROR: language file line 'zlib param error====' missing right side translation.
ERROR: language file line 'bad zip file====' missing right side translation.
ERROR: language file line 'zlib internal error====' missing right side translation.
ERROR: language file line 'end of zip archive====' missing right side translation.
ERROR: language file line 'zip CRC error====' missing right side translation.
ERROR: language file line 'Resource temporarily unavailable====' missing right side translation.
ERROR: language file line 'Resource deadlock avoided====' missing right side translation.
ERROR: language file line 'File name too long====' missing right side translation.
ERROR: language file line 'Function not implemented====' missing right side translation.
ERROR: language file line 'Directory not empty====' missing right side translation.
ERROR: language file line 'Wide character encoding error====' missing right side translation.
ERROR: language file line 'Argument list too long====' missing right side translation.
ERROR: language file line 'Permission denied. Perhaps you do not have access to a directory or file system====' missing right side translation.
ERROR: language file line 'Bad file descriptor====' missing right side translation.
ERROR: language file line 'Device busy====' missing right side translation.
ERROR: language file line 'No child processes====' missing right side translation.
ERROR: language file line 'Numerical argument out of domain====' missing right side translation.
ERROR: language file line 'File exists====' missing right side translation.
ERROR: language file line 'Bad address====' missing right side translation.
ERROR: language file line 'File too large====' missing right side translation.
ERROR: language file line 'File Position Error====' missing right side translation.
ERROR: language file line 'Interrupted system call====' missing right side translation.
ERROR: language file line 'Invalid argument====' missing right side translation.
ERROR: language file line 'Input/output error====' missing right side translation.
ERROR: language file line 'Is a directory====' missing right side translation.
ERROR: language file line 'Too many open files====' missing right side translation.
ERROR: language file line 'Too many links====' missing right side translation.
ERROR: language file line 'Too many open files in system====' missing right side translation.
ERROR: language file line 'Operation not supported by device====' missing right side translation.
ERROR: language file line 'No such file or directory====' missing right side translation.
ERROR: language file line 'No error detected====' missing right side translation.
ERROR: language file line 'Exec format error====' missing right side translation.
ERROR: language file line 'No locks available====' missing right side translation.
ERROR: language file line 'Out of memory====' missing right side translation.
ERROR: language file line 'No space left on device. Perhaps your hard drive is full====' missing right side translation.
ERROR: language file line 'Not a directory====' missing right side translation.
ERROR: language file line 'Inappropriate ioctl for device====' missing right side translation.
ERROR: language file line 'Device not configured====' missing right side translation.
ERROR: language file line 'Operation not permitted. Perhaps you do not have access to a directory or file system====' missing right side translation.
ERROR: language file line 'Broken pipe====' missing right side translation.
ERROR: language file line 'Result too large====' missing right side translation.
ERROR: language file line 'The destination file system is read-only====' missing right side translation.
ERROR: language file line 'Signal error====' missing right side translation.
ERROR: language file line 'Illegal seek====' missing right side translation.
ERROR: language file line 'No such process====' missing right side translation.
ERROR: language file line 'Unknown error====' missing right side translation.
ERROR: language file line 'Cross-device link====' missing right side translation.
ERROR: language file line 'File not found====' missing right side translation.
ERROR: language file line 'Queue element not found during deletion.====' missing right side translation.
ERROR: language file line 'param err====' missing right side translation.
ERROR: language file line 'Directory is full====' missing right side translation.
ERROR: language file line 'The disk is full====' missing right side translation.
ERROR: language file line 'no such volume====' missing right side translation.
ERROR: language file line 'An internal I/O error occurred====' missing right side translation.
ERROR: language file line 'bad name====' missing right side translation.
ERROR: language file line 'file not open====' missing right side translation.
ERROR: language file line 'end of file====' missing right side translation.
ERROR: language file line 'position error====' missing right side translation.
ERROR: language file line 'Memory is full====' missing right side translation.
ERROR: language file line 'Too many files open====' missing right side translation.
ERROR: language file line 'A disk is write protected====' missing right side translation.
ERROR: language file line 'File locked====' missing right side translation.
ERROR: language file line 'Hard disk is locked====' missing right side translation.
ERROR: language file line 'A file is in use by another application====' missing right side translation.
ERROR: language file line 'duplicate file name====' missing right side translation.
ERROR: language file line 'File already open with write permissions by another application====' missing right side translation.
ERROR: language file line 'refnum error====' missing right side translation.
ERROR: language file line 'get file position error====' missing right side translation.
ERROR: language file line 'A needed volume is offline====' missing right side translation.
ERROR: language file line 'Permissions error - perhaps you do not have access to a directory====' missing right side translation.
ERROR: language file line 'no such drive====' missing right side translation.
ERROR: language file line 'Not a macintosh disk====' missing right side translation.
ERROR: language file line 'bad master directory block====' missing right side translation.
ERROR: language file line 'Write permissions error - perhaps you do not have enough access to a directory====' missing right side translation.
ERROR: language file line 'directory not found====' missing right side translation.
ERROR: language file line 'Out of memory (memory is full)====' missing right side translation.
ERROR: language file line 'You have insufficient privileges for this operation====' missing right side translation.
ERROR: language file line 'DONE====' missing right side translation.
ERROR: language file line 'DISMISS====' missing right side translation.
ERROR: language file line 'Search====' missing right side translation.
ERROR: language file line 'Your graphics hardware cannot support X-Plane. X-Plane requires a DX9-class graphics card or newer.====' missing right side translation.
ERROR: language file line 'X-Plane does not support the Gallium driver stack.====' missing right side translation.
ERROR: language file line 'Loading bitmap ====' missing right side translation.
ERROR: language file line 'Frame-rate check passed. Flight-control hardware found.====' missing right side translation.
ERROR: language file line 'Flight training approved.====' missing right side translation.
ERROR: language file line 'Frame-rate check FAILED!====' missing right side translation.
ERROR: language file line 'Do not use this sim for flight training!====' missing right side translation.
ERROR: language file line 'Flight-control hardware NOT found!====' missing right side translation.
ERROR: language file line '(Remember, you can set up your flight controls by making all the desired selections in the JOYSTICK AND EQUIPMENT screen in the SETTINGS menu and hitting the MEMORIZE THIS CONFIG button).====' missing right side translation.
ERROR: language file line 'Frame-rate check FAILED! Flight-control hardware NOT found!====' missing right side translation.
ERROR: language file line 'ROLL not found! ====' missing right side translation.
ERROR: language file line 'PITCH not found! ====' missing right side translation.
ERROR: language file line 'YAW not found! ====' missing right side translation.
ERROR: language file line 'BRAKES not found! ====' missing right side translation.
ERROR: language file line 'THROTTLES not found! ====' missing right side translation.
ERROR: language file line 'PROPS not found! ====' missing right side translation.
ERROR: language file line 'MIXTURES not found! ====' missing right side translation.
ERROR: language file line 'm====m' missing right side translation.
ERROR: language file line 'Instrument Approach Data by Lufthansa Systems, brought to you====' missing right side translation.
ERROR: language file line 'with Aerosoft Navdata Pro, available from www.Aerosoft.com====' missing right side translation.
ERROR: language file line 'Airspace data from www.SoaringWeb.com====' missing right side translation.
ERROR: language file line 'FreeType fonts from www.FreeType.org.====' missing right side translation.
ERROR: language file line 'Say Intentions====' missing right side translation.
ERROR: language file line 'Don’t Save====' missing right side translation.
ERROR: language file line 'This is X-Plane, HOME-USE VERSION, NOT APPROVED FOR COMMERCIAL USE.====' missing right side translation.
ERROR: language file line 'Do NOT use this version for commercial applications.====' missing right side translation.
ERROR: language file line 'For commercial use, see www.X-Plane.com store.====' missing right side translation.
ERROR: language file line 'Report violations to austin@X-Plane.com.====' missing right side translation.
ERROR: language file line 'Will init plugins.====' missing right side translation.
ERROR: language file line 'Select the key you'd like to program from the list on the left of this screen and hit any key you like! Then select the group and item to assign a funtion to that keypress!====' missing right side translation.
ERROR: language file line 'X-Plane crashed on its last flight. Load with DEFAULT rendering options?====' missing right side translation.
ERROR: language file line 'Yes====' missing right side translation.
ERROR: language file line 'Use the DEFAULT rendering options.====' missing right side translation.
ERROR: language file line 'Keep the PREVIOUS rendering options.====' missing right side translation.
ERROR: language file line 'Playing back your replay (in slow motion if needed) to create a video recording!====' missing right side translation.
ERROR: language file line 'Video is recording, but cannot continuously record at this video size!====' missing right side translation.
ERROR: language file line 'Video is recording! This message will NOT be visible in the movie!====' missing right side translation.
ERROR: language file line '|capture movie in background { This lets you run at a higher framerate when capturing videos, but results in an upside-down movie on some computers.====' missing right side translation.
ERROR: language file line 'Crash Reporter====' missing right side translation.
ERROR: language file line 'Update Available====' missing right side translation.
ERROR: language file line 'Unlock X-Plane====' missing right side translation.
ERROR: language file line 'Missing Scenery====' missing right side translation.
ERROR: language file line 'Send Feedback====' missing right side translation.
ERROR: language file line 'Author====' missing right side translation.
ERROR: language file line 'Video Recording Options====' missing right side translation.
ERROR: language file line 'Flight Data Recorder: Xavion====' missing right side translation.
ERROR: language file line 'Flight Data Recorder: file====' missing right side translation.
ERROR: language file line 'January====' missing right side translation.
ERROR: language file line 'February====' missing right side translation.
ERROR: language file line 'March====' missing right side translation.
ERROR: language file line 'April====' missing right side translation.
ERROR: language file line 'May====' missing right side translation.
ERROR: language file line 'June====' missing right side translation.
ERROR: language file line 'July====' missing right side translation.
ERROR: language file line 'August====' missing right side translation.
ERROR: language file line 'September====' missing right side translation.
ERROR: language file line 'October====' missing right side translation.
ERROR: language file line 'November====' missing right side translation.
ERROR: language file line 'December====' missing right side translation.
ERROR: language file line 'Will read fixes.====' missing right side translation.
ERROR: language file line 'Will read airways.====' missing right side translation.
ERROR: language file line 'Will read NAVAIDs.====' missing right side translation.
ERROR: language file line 'Will read airports.====' missing right side translation.
ERROR: language file line 'Enter your flight plan above. Leave \"Departure ICAO\" blank for popup clearances.\n\nFor the route you may enter realistic routes with NDB/VOR/FIXES as well as V/J airways.\n\nSIDS/STARS are not allowed!====' missing right side translation.
ERROR: language file line 'Departure ICAO should be blank when filing for a popup clearance.====' missing right side translation.
ERROR: language file line 'No Pro-Use Key found! G-430 support will not be allowed!====' missing right side translation.
ERROR: language file line 'If you want to run a real G-430 with X-Plane, then you have 2 options to do this:====' missing right side translation.
ERROR: language file line '1: Go to www.X-Plane.com and get a key... these keys will unlock the G-430 functionality.====' missing right side translation.
ERROR: language file line '2: Go to www.FlyPFC.com. PFC can build you a complete cockpit with yokes, sticks, mounted G-430 radios... everything!====' missing right side translation.
ERROR: language file line 'No Pro-Use Key found! G-1000 support will not be allowed!====' missing right side translation.
ERROR: language file line 'If you want to run a real G-1000 with X-Plane, then you have 2 options to do this:====' missing right side translation.
ERROR: language file line '1: Go to www.X-Plane.com and get a key... these keys will unlock the G-1000 functionality.====' missing right side translation.
ERROR: language file line '2: Go to www.FlyPFC.com. PFC can build you a complete cockpit with yokes, sticks, mounted G-1000 radios... everything!====' missing right side translation.
ERROR: language file line 'No Projector Key found! A Projector Key is needed to get cylindrical or dome projection options without this alert message!====' missing right side translation.
ERROR: language file line 'Dome projection is designed for bigger sims.====' missing right side translation.
ERROR: language file line 'Go to www.X-Plane.com and get one Projector Key for each copy of X-Plane on your network... these keys will unlock the dome projection without this alert message!====' missing right side translation.
ERROR: language file line 'I could not find the USB key for this custom aircraft!====' missing right side translation.
ERROR: language file line 'If you want to fly this plane, you need to insert the USB key that Randy gave you!====' missing right side translation.
ERROR: language file line 'Put the key in and re-start X-Plane.====' missing right side translation.
ERROR: language file line 'Run Demo====' missing right side translation.
ERROR: language file line 'PRESETS====' missing right side translation.
ERROR: language file line 'run at this resolution | non-custom will be full-screen { Check this to put X-Plane into full screen mode at the res at right. When X-Plane is in a window, you can drag the lower right corner to resize the window.====' missing right side translation.
ERROR: language file line 'lateral offset|(degrees,for wrap-around) { Experiment with these offsets if using multiple computers for wrap-around views, as set up in the internet options screen.====' missing right side translation.
ERROR: language file line 'vertical offset|(degrees, for wrap-around) { Experiment with these offsets if using multiple computers for wrap-around views, as set up in the internet options screen.====' missing right side translation.
ERROR: language file line 'roll offset for|(degrees, for wrap-around) { You might want to use this if you are running a monitor SIDEWAYS.====' missing right side translation.
ERROR: language file line 'lateral offset|(ratio, for monitor-wall) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation.
ERROR: language file line 'vertical offset|(ratio, for monitor-wall) { Each unit slides the screen left/right by half its width. Use -1/+1 for two screens side by side; use -2/0/+2 for three screens in a row.====' missing right side translation.
ERROR: language file line '|display IOS on second monitor { If this option is on, then X-Plane will display the cockpit on a second monitor, allowing you to run an Instructor Operator Station or anything else you like on the main monitor.====' missing right side translation.
ERROR: language file line '|view is locked to default { All view controls are disabled. You have the default forward view whether you like it or not.====' missing right side translation.
ERROR: language file line '|windshield effects OFF { This turns off effects that appear on the windshield, such as rain and bird-strikes. This might be desired for some installations with projectors.====' missing right side translation.
ERROR: language file line '|forward view scenery only { Use the forward no-HUD view in the default forward view. Useful for simpits with real panels.====' missing right side translation.
ERROR: language file line '|forward view with HUD { Display the HUD in the default forward view.====' missing right side translation.
ERROR: language file line '|forward view with panel { Display the panel as designed by the aircraft author in the default forward view.====' missing right side translation.
ERROR: language file line '|forward view with 3D cockpit { Display the 3D cockpit in the default forward view. Useful only if the aircraft has a 3D cockpit.====' missing right side translation.
ERROR: language file line 'Set to minimum====' missing right side translation.
ERROR: language file line 'Set to low====' missing right side translation.
ERROR: language file line 'Set to medium====' missing right side translation.
ERROR: language file line 'Set to high====' missing right side translation.
ERROR: language file line 'Set to extreme====' missing right side translation.
ERROR: language file line 'The preset you picked requires hardware capabilities that your computer does not have.====' missing right side translation.
ERROR: language file line 'Some settings have been lowered to the maximum your computer is capable of.====' missing right side translation.
ERROR: language file line 'You should probably try a lower setting for better performance and a smoother flight.====' missing right side translation.
ERROR: language file line 'Net data saving to log.txt!====' missing right side translation.
ERROR: language file line 'Time data saving to log.txt!====' missing right side translation.
ERROR: language file line 'Disk data saving to data.txt!====' missing right side translation.
ERROR: language file line 'Tire blown!====' missing right side translation.
ERROR: language file line 'Carb ice suspected!====' missing right side translation.
ERROR: language file line 'Structure over-G!====' missing right side translation.
ERROR: language file line 'Structure over-speed!====' missing right side translation.
ERROR: language file line 'Flap over-speed!====' missing right side translation.
ERROR: language file line 'Gear over-speed!====' missing right side translation.
ERROR: language file line 'Internet output disabled====' missing right side translation.
ERROR: language file line 'Disk output disabled====' missing right side translation.
ERROR: language file line 'Graphical output disabled====' missing right side translation.
ERROR: language file line 'Cockpit output disabled====' missing right side translation.
ERROR: language file line 'Internet output not enabled====' missing right side translation.
ERROR: language file line '<        ANCHOR DEPLOYED!       >====' missing right side translation.
ERROR: language file line 'You know that real single-engine planes pull to the left, right?====' missing right side translation.
ERROR: language file line 'fueled with wrong gas!====' missing right side translation.
ERROR: language file line 'explosion====' missing right side translation.
ERROR: language file line 'shooting at us====' missing right side translation.
ERROR: language file line 'fuel leak!====' missing right side translation.
ERROR: language file line 'autopilot aileron servo====' missing right side translation.
ERROR: language file line 'autopilot elevator servo====' missing right side translation.
ERROR: language file line 'actuator jam====' missing right side translation.
ERROR: language file line 'actuator collapse====' missing right side translation.
ERROR: language file line 'ice: inlet heat====' missing right side translation.
ERROR: language file line 'ice: prop heat====' missing right side translation.
ERROR: language file line 'OAT sensor====' missing right side translation.
ERROR: language file line 'fuel quantity sensor====' missing right side translation.
ERROR: language file line 'nav-1 radio====' missing right side translation.
ERROR: language file line 'nav-2 radio====' missing right side translation.
ERROR: language file line 'com-1 radio====' missing right side translation.
ERROR: language file line 'com-2 radio====' missing right side translation.
ERROR: language file line 'nav/com in Garmin 430 #1====' missing right side translation.
ERROR: language file line 'nav/com in Garmin 430 #2====' missing right side translation.
ERROR: language file line 'GEA====' missing right side translation.
ERROR: language file line 'ADC====' missing right side translation.
ERROR: language file line 'G1000 airspeed====' missing right side translation.
ERROR: language file line 'G1000 altimeter====' missing right side translation.
ERROR: language file line 'G1000 magntmtr====' missing right side translation.
ERROR: language file line 'G1000 vvi====' missing right side translation.
ERROR: language file line 'engine-driven fuel pump====' missing right side translation.
ERROR: language file line 'fuel flow restricted====' missing right side translation.
ERROR: language file line 'air flow restricted====' missing right side translation.
ERROR: language file line 'fuel flow fluctuation====' missing right side translation.
ERROR: language file line 'hung start (weak starter)====' missing right side translation.
ERROR: language file line 'hung start (clogged nozzles)====' missing right side translation.
ERROR: language file line 'hot start (extra fuel)====' missing right side translation.
ERROR: language file line 'runaway ITT (low airflow)====' missing right side translation.
ERROR: language file line 'reverser-retract====' missing right side translation.
ERROR: language file line 'reverser-lock====' missing right side translation.
ERROR: language file line 'engine FADEC====' missing right side translation.
ERROR: language file line 'oil pump====' missing right side translation.
ERROR: language file line 'Fail on command====' missing right side translation.
ERROR: language file line 'Allow random failures====' missing right side translation.
ERROR: language file line 'Mean time between failure, in hours|This value is a failure probability for each system on the plane, and is IN ADDITION TO the failure probabilities listed in the other failure screens. { This value is the MTBF of each individual component. The overall MTBF of the aircraft is approximately the component MTBF divided by the number of components on the aircraft that can fail.====' missing right side translation.
ERROR: language file line 'World====' missing right side translation.
ERROR: language file line 'Instruments====' missing right side translation.
ERROR: language file line 'Sensor====' missing right side translation.
ERROR: language file line 'Primary====' missing right side translation.
ERROR: language file line 'Engine====' missing right side translation.
ERROR: language file line 'Reverse====' missing right side translation.
ERROR: language file line 'Accessory====' missing right side translation.
ERROR: language file line '| external visual/cockpit receptions per second====' missing right side translation.
ERROR: language file line '| aircraft folder name suffix { If you want a suffix to always be added to the end of the aircraft folder name used for opening on this computer, then enter that suffix here. This is useful if you have a multi-cockpit setup, with 'Cirrus Folder:Cirrus.acf' on the master computer, and 'Cirrus Folder-engines:Cirrus.acf' on an external cockpit, for example. In that case , you would enter '-engines' here on the external cockpit computer only.====' missing right side translation.
ERROR: language file line '| external IOS data receptions per second====' missing right side translation.
ERROR: language file line 'This computer name:====' missing right side translation.
ERROR: language file line 'This computer IP addresses:====' missing right side translation.
ERROR: language file line 'a position output machine talking to a master machine====' missing right side translation.
ERROR: language file line 'an IOS talking to a master machine====' missing right side translation.
ERROR: language file line 'Master====' missing right side translation.
ERROR: language file line 'External Visuals====' missing right side translation.
ERROR: language file line '1: Get Xavion from the AppStore for your iPad or iPhone.====' missing right side translation.
ERROR: language file line '2: Go flying in a REAL airplane, running Xavion in flight.====' missing right side translation.
ERROR: language file line '3: Land.====' missing right side translation.
ERROR: language file line '4: Get your iPad or iPhone on the same network as this copy of X-Plane, and fire up Xavion on it!====' missing right side translation.
ERROR: language file line '5: Check this box and enter the IP address of that iPhone or iPad here.====' missing right side translation.
ERROR: language file line '6: Choose one of the flights from the list below! You are seeing Xavions' Flight Data Recorder of YOUR REAL FLIGHTS!====' missing right side translation.
ERROR: language file line '7: X-Plane will Then save that FDR file in your X-Plane folder.====' missing right side translation.
ERROR: language file line '7: X-Plane has saved "+file_name+" in your X-Plane folder.====' missing right side translation.
ERROR: language file line '8: Now select that file in the 'Load Flight Data Recorder File' menu item. (You can rename it to any name you like (that ends in '.FDR') on your desktop.====' missing right side translation.
ERROR: language file line '9: Then, see your flight in X-Plane!====' missing right side translation.
ERROR: language file line 'Control Pad====' missing right side translation.
ERROR: language file line 'pitch====' missing right side translation.
ERROR: language file line 'roll====' missing right side translation.
ERROR: language file line 'yaw====' missing right side translation.
ERROR: language file line 'throttle====' missing right side translation.
ERROR: language file line 'collective====' missing right side translation.
ERROR: language file line 'left toe brake====' missing right side translation.
ERROR: language file line 'right toe brake====' missing right side translation.
ERROR: language file line 'prop====' missing right side translation.
ERROR: language file line 'mixture====' missing right side translation.
ERROR: language file line 'carb heat====' missing right side translation.
ERROR: language file line 'thrust vector====' missing right side translation.
ERROR: language file line 'wing sweep====' missing right side translation.
ERROR: language file line 'speedbrakes====' missing right side translation.
ERROR: language file line 'displacement====' missing right side translation.
ERROR: language file line 'reverse====' missing right side translation.
ERROR: language file line 'elev trim====' missing right side translation.
ERROR: language file line 'ailn trim====' missing right side translation.
ERROR: language file line 'rudd trim====' missing right side translation.
ERROR: language file line 'nosewheel tiller====' missing right side translation.
ERROR: language file line 'backup throttle====' missing right side translation.
ERROR: language file line 'throttle 1====' missing right side translation.
ERROR: language file line 'throttle 2====' missing right side translation.
ERROR: language file line 'throttle 3====' missing right side translation.
ERROR: language file line 'throttle 4====' missing right side translation.
ERROR: language file line 'prop 1====' missing right side translation.
ERROR: language file line 'prop 2====' missing right side translation.
ERROR: language file line 'prop 3====' missing right side translation.
ERROR: language file line 'prop 4====' missing right side translation.
ERROR: language file line 'mixture 1====' missing right side translation.
ERROR: language file line 'mixture 2====' missing right side translation.
ERROR: language file line 'mixture 3====' missing right side translation.
ERROR: language file line 'mixture 4====' missing right side translation.
ERROR: language file line 'reverse 1====' missing right side translation.
ERROR: language file line 'reverse 2====' missing right side translation.
ERROR: language file line 'reverse 3====' missing right side translation.
ERROR: language file line 'reverse 4====' missing right side translation.
ERROR: language file line 'view L/R====' missing right side translation.
ERROR: language file line 'view U/D====' missing right side translation.
ERROR: language file line 'view zoom====' missing right side translation.
ERROR: language file line 'camera L/R====' missing right side translation.
ERROR: language file line 'camera U/D====' missing right side translation.
ERROR: language file line 'camera zoom====' missing right side translation.
ERROR: language file line 'gun/bomb L/R====' missing right side translation.
ERROR: language file line 'gun/bomb U/D====' missing right side translation.
ERROR: language file line 'Uncalibrated joystick devices have been found. Do you want to calibrate them now?====' missing right side translation.
ERROR: language file line 'Please move ALL of your joystick axis through their full range several times.====' missing right side translation.
ERROR: language file line 'When you are done, press the button to continue.====' missing right side translation.
ERROR: language file line 'Your joystick is now calibrated!====' missing right side translation.
ERROR: language file line 'To assign buttons, pick Joystick and Hardware from the Settings menu.====' missing right side translation.
ERROR: language file line 'Ok====' missing right side translation.
ERROR: language file line 'pitch stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation.
ERROR: language file line 'roll stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation.
ERROR: language file line 'yaw stability-augmentation, FULL-LEFT FOR MOST REALISM|FULL-RIGHT for most stability-augmentation { In reality, aircraft controls have near-infinite resolution, high displacement-force, and the plane imparts G on you when you pull back. To help make up for the lack of these things in the sim, you can slide these sliders up a bit to add \"auto-control\" displacements to stabilize the plane... it isn't realistic, but may make the plane FEEL more realistic.====' missing right side translation.
ERROR: language file line 'rudder & tiller====' missing right side translation.
ERROR: language file line 'lft brake====' missing right side translation.
ERROR: language file line 'rgt brake====' missing right side translation.
ERROR: language file line 'Track-IR and TrackHat when in 3-D cockpit views | NaturalPoint.com/trackir or Trackhat.org for head-tracking devices that guide your view in X-Plane after you hit ctrl-o. { Indicate here if you have this hardware.====' missing right side translation.
ERROR: language file line 'Oculus Rift when in 3-D cockpit views|www.oculusvr.com for a virtual reality glass that shows 3-D view and also tracks your head in the game. { Indicate here if you have this hardware.====' missing right side translation.
ERROR: language file line 'I tried to open the following plane, but could not:====' missing right side translation.
ERROR: language file line 'This smacks of a corrupted airplane file, or a file that is not REALLY an airplane file, or a missing airplane file altogether!====' missing right side translation.
ERROR: language file line 'I will open the default plane now so you can still fly though.====' missing right side translation.
ERROR: language file line 'I could not find the default plane:====' missing right side translation.
ERROR: language file line 'Be sure that path requested above really is available!====' missing right side translation.
ERROR: language file line 'Re-Install X-Plane from the DVD or www.X-Plane.com if needed.====' missing right side translation.
ERROR: language file line 'Cycle Flight Model Display====' missing right side translation.
ERROR: language file line 'Show Flight Model====' missing right side translation.
ERROR: language file line 'Hide Flight Model====' missing right side translation.
ERROR: language file line 'Finishing asynchronous loading.====' missing right side translation.
ERROR: language file line 'Done with pre-loading.====' missing right side translation.
ERROR: language file line 'You can download the missing scenery for FREE through Steam.====' missing right side translation.
ERROR: language file line 'Right click on X-Plane in your Steam library. Then go to Properties -> DLC and select the continent from the list.====' missing right side translation.
ERROR: language file line 'Minimal====' missing right side translation.
ERROR: language file line 'Maximum====' missing right side translation.
ERROR: language file line 'Left====' missing right side translation.
ERROR: language file line 'Right====' missing right side translation.
ERROR: language file line 'Center====' missing right side translation.
ERROR: language file line 'Airliner====' missing right side translation.
ERROR: language file line 'Experimental====' missing right side translation.
ERROR: language file line 'Helicopter====' missing right side translation.
ERROR: language file line 'Military====' missing right side translation.
ERROR: language file line 'Seaplane====' missing right side translation.
ERROR: language file line 'Science Fiction====' missing right side translation.
ERROR: language file line 'VTOL====' missing right side translation.
ERROR: language file line 'Ultralight====' missing right side translation.
ERROR: language file line 'Favorites====' missing right side translation.
ERROR: language file line 'Unclassified====' missing right side translation.
ERROR: language file line 'Above ====Oberhalb von' does not have the same trailing spaces.
ERROR: language file line 'G-units. We will try to give you this G-load by moving the pitch controls ====G-Faktor. Dieser wird durch Bewegung des Höhenruders nachgeahmt' does not have the same trailing spaces.
ERROR: language file line 'roll rate|(how fast the aircraft is allowed to roll, degrees/second)====' missing right side translation.
ERROR: language file line 'Mild====' missing right side translation.
ERROR: language file line 'Moderate====' missing right side translation.
ERROR: language file line 'Severe====' missing right side translation.
ERROR: language file line 'Heavy====' missing right side translation.
ERROR: language file line 'Marginal VFR====' missing right side translation.
ERROR: language file line 'Non-Precision Approach====' missing right side translation.
ERROR: language file line 'IFR Cat I====' missing right side translation.
ERROR: language file line 'IFR Cat II====' missing right side translation.
ERROR: language file line 'IFR Cat III====' missing right side translation.
ERROR: language file line 'Stormy====' missing right side translation.
ERROR: language file line 'clear-cirrus-few cumulus-cumulus sct-cumulus bkn-cumulus ocast-stratus====' missing right side translation.
ERROR: language file line 'visibility: ====' missing right side translation.
ERROR: language file line 'precip: ====' missing right side translation.
ERROR: language file line 'storms: ====' missing right side translation.
ERROR: language file line 'turblnc: ====' missing right side translation.
ERROR: language file line 'TAT|-(C)====' missing right side translation.
ERROR: language file line 'TAT|-(F)====' missing right side translation.
ERROR: language file line 'high-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation.
ERROR: language file line 'mid-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation.
ERROR: language file line 'low-altitude wind layer|(MSL) { This is the elevation of the winds aloft above sea level. X-Plane will interpolate smoothly between low and high winds, and will NOT extrapolate.====' missing right side translation.
ERROR: language file line 'Set uniform weather if desired, and then drag the mouse across the map to place more clouds and storms! The more you drag, the more inense the weather gets!====' missing right side translation.
ERROR: language file line 'Real-Weather download failed. Will try again in ====' missing right side translation.
ERROR: language file line '|DOWNLOAD Real-Weather files from the net { This option will download real weather files called 'METAR.rwx' and 'winds.rwx' from the net that contain actual current weather at thousands of airports across the world. This weather is recorded every hour, and can be used (with the option below) to set the weather in X-Plane to match the real world!====' missing right side translation.
ERROR: language file line 'Read right now!====' missing right side translation.
Initializing off screen memory.
Initializing off screen memory complete.
I found the following scenery packages (prioritized in this order):
  0 Custom Scenery/DD LUKK Chisinau XP/
  1 Custom Scenery/DD LUKK Chisinau XP Documents/
  2 Custom Scenery/DD LUKK City Chisinau XP/
  3 Custom Scenery/Pilot Plus - Ibiza Airport/
  4 Custom Scenery/Aerosoft LFKC Calvi 1.0 Airport/
  5 Custom Scenery/JustSim_LFMN_Nice/
  6 Custom Scenery/JustSim_LFMN_Nice_osm/
  7 Custom Scenery/Aerosoft - EDDT Berlin Tegel/ (disabled)
  8 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt/ (disabled)
  9 Custom Scenery/Aerosoft - LSGG Genf/ (disabled)
 10 Custom Scenery/Pilot Plus - LSGG Geneva Airport V1.0/
 11 Custom Scenery/Aerosoft - EDLV Airport Weeze/
 12 Custom Scenery/Digital Design - LOWS Salzburg/
 13 Custom Scenery/LOWI Demo Area/
 14 Custom Scenery/Mega_Airport_Frankfurt_V2BETA/
 15 Custom Scenery/VFR-Objects_GK_+50+008_D_Frankfurt_Main City 1.2/
 16 Custom Scenery/DD UUEE Moscow Sheremetyevo XP/
 17 Custom Scenery/DD UUEE Moscow Sheremetyevo XP Documents/
 18 Custom Scenery/ZZZ DD UUEE Moscow Sheremetyevo XP Terrain/
 19 Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 a/
 20 Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 b/
 21 Custom Scenery/Central Berlin/
 22 Custom Scenery/EDDT_STATIC/
 23 Custom Scenery/AirportTegel/
 24 Custom Scenery/APT GCXO - Los Rodeos/
 25 Custom Scenery/SPA-POR_Wind_Farms_2_2/
 26 Custom Scenery/GXDG_EDLP/
 27 Custom Scenery/GXDG_LOWI_V1/
 28 Custom Scenery/Untitled 4/
 29 Custom Scenery/Untitled 5/
 30 Custom Scenery/KAVX - Catalina Airport/
 31 Custom Scenery/EDAH_Heringsdorf/
 32 Custom Scenery/DD New York City XP/
 33 Custom Scenery/DD New York City XP Documents/
 34 Custom Scenery/Untitled 3/
 35 Custom Scenery/EDDN-V2/
 36 Custom Scenery/Aerosoft - PALH Lake Hood/
 37 Custom Scenery/Aerosoft - PANC Airport Anchorage/
 38 Custom Scenery/Aerosoft - Z41 Lake Hood Strip/
 39 Custom Scenery/KPAE_Paine_Field 10.5/
 40 Custom Scenery/KSEA Boeing Country 10.5/
 41 Custom Scenery/EDDM/
 42 Custom Scenery/Untitled 2/
 43 Custom Scenery/Aerosoft - EGLL Heathrow/ (disabled)
 44 Custom Scenery/Aerosoft - LEBL Barcelona/ (disabled)
 45 Custom Scenery/EDDP_GWEXT_1.6b1/
 46 Custom Scenery/Barcelona sea plane/
 47 Custom Scenery/Waves_Library/
 48 Custom Scenery/ff_library/
 49 Custom Scenery/Barcelona_Skyline_v2.1/
 50 Custom Scenery/DD New York Airports XP/
 51 Custom Scenery/DD New York Airports XP Documents/
 52 Custom Scenery/ZZZ DD New York Airports XP Terrain/
 53 Custom Scenery/Seasons_assets/
 54 Custom Scenery/DAI Media Scenery - LEBL - Barcelona El Prat/
 55 Custom Scenery/DAI Media Scenery - LEBL - Barcelona El Prat Base/
 56 Custom Scenery/DD EPWA Warsaw Chopin Airport XP/
 57 Custom Scenery/DD EPWA Warsaw Chopin Airport XP Documents/
 58 Custom Scenery/DD Warsaw City XP Layer 1/
 59 Custom Scenery/DD Warsaw City XP Layer 2/
 60 Custom Scenery/DD Warsaw City XP Layer 3/
 61 Custom Scenery/03 - FlyTampa-Maarten/
 62 Custom Scenery/Seasons_N_Autumn/
 63 Custom Scenery/Seasons_N_Winter1/
 64 Custom Scenery/Seasons_N_Winter2/
 65 Custom Scenery/Seasons_S_Autumn/
 66 Custom Scenery/Seasons_S_Winter/
 67 Custom Scenery/000 Drzewiecki Design Library/
 68 Custom Scenery/04 VFR_Germany_1/
 69 Custom Scenery/04 VFR_Germany_2/
 70 Custom Scenery/04 VFR_Germany_3/
 71 Custom Scenery/04 VFR_Germany_4/
 72 Custom Scenery/29Palms_Skiathos_X/
 73 Custom Scenery/_DefaultStreets London-Heathrow/
 74 Custom Scenery/_StaticAirplanes Dublin/
 75 Custom Scenery/_StaticAirplanes London-Heathrow/
 76 Custom Scenery/ABSim_LJPZ v2.1 (XP10)/
 77 Custom Scenery/Aerosoft - EBBR Brussels/
 78 Custom Scenery/Aerosoft - EBBR Brussels zExclusions/
 79 Custom Scenery/Aerosoft - EDDF Frankfurt/ (disabled)
 80 Custom Scenery/Aerosoft - EDDH Airport Hamburg/
 81 Custom Scenery/Aerosoft - EDDH Airport Hamburg zExclusions/
 82 Custom Scenery/Aerosoft - EDDK Cologne zExclusions/
 83 Custom Scenery/Aerosoft - EDDL Airport Dusseldorf/
 84 Custom Scenery/Aerosoft - EDDL Airport Dusseldorf zExclusions/
 85 Custom Scenery/Aerosoft - EDDM Munich zExclusions/
 86 Custom Scenery/Aerosoft - EDFH Airport Frankfurt-Hahn/
 87 Custom Scenery/Aerosoft - EDFH Airport Frankfurt-Hahn zExclusions/
 88 Custom Scenery/Aerosoft - EDLP Paderborn-Lippstadt zExclusions/
 89 Custom Scenery/Aerosoft - EDLV Airport Weeze zExclusions/
 90 Custom Scenery/Aerosoft - EGBB Birmingham/
 91 Custom Scenery/Aerosoft - EGBB Birmingham zExclusions/
 92 Custom Scenery/Aerosoft - EGKK London-Gatwick/
 93 Custom Scenery/Aerosoft - EGKK London-Gatwick zExclusions/
 94 Custom Scenery/Aerosoft - EGLL Airport London-Heathrow/
 95 Custom Scenery/Aerosoft - EGLL Heathrow zExclusions/
 96 Custom Scenery/Aerosoft - EGPF/
 97 Custom Scenery/Aerosoft - EGPF Glasgow/
 98 Custom Scenery/Aerosoft - EGPF Glasgow zExclusions/
 99 Custom Scenery/Aerosoft - EGSS/
100 Custom Scenery/Aerosoft - EGSS London-Stansted/
101 Custom Scenery/Aerosoft - EGSS London-Stansted zExclusions/
102 Custom Scenery/Aerosoft - EHAM Airport Amsterdam/
103 Custom Scenery/Aerosoft - EHAM Airport Amsterdam zExclusions/
104 Custom Scenery/Aerosoft - EIDW Airport Dublin/
105 Custom Scenery/Aerosoft - Flylogic - LSZR Altenrhein zExclusions/
106 Custom Scenery/Aerosoft - LEBL Barcelona zExclusions/
107 Custom Scenery/Aerosoft - LEMD Madrid/
108 Custom Scenery/Aerosoft - LEMD Madrid zExclusions/
109 Custom Scenery/Aerosoft - LFBO Toulouse Airport/
110 Custom Scenery/Aerosoft - LFBO Toulouse Scenery/
111 Custom Scenery/Aerosoft - LFBO Toulouse zExclusions/
112 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X/ (disabled)
113 Custom Scenery/Aerosoft - LFMN Nice Cote d Azur X zExclusions/ (disabled)
114 Custom Scenery/Aerosoft - LFPG Paris CDG/
115 Custom Scenery/Aerosoft - LFPG Paris CDG zExclusions/
116 Custom Scenery/Aerosoft - LFPO Paris Orly/
117 Custom Scenery/Aerosoft - LFPO Paris Orly zExclusions/
118 Custom Scenery/Aerosoft - LPFR Faro/
119 Custom Scenery/Aerosoft - LPFR Faro zExclusions/
120 Custom Scenery/Aerosoft - LSZA Lugano Airport/
121 Custom Scenery/Aerosoft - LSZA Lugano Scenery/
122 Custom Scenery/Aerosoft - LSZA Lugano zExclusions/
123 Custom Scenery/Aerosoft Mega Dublin EXPANSION PACK/
124 Custom Scenery/MegaAirportStuttgart/
125 Custom Scenery/Aerosoft - EDDS Stuttgart zExclusions/
126 Custom Scenery/Aerosoft - EDDT Berlin Tegel zExclusions/
127 Custom Scenery/Airports_of_Norway/
128 Custom Scenery/Airpot_palmademallorca/
129 Custom Scenery/EGCC Manchester Airport/
130 Custom Scenery/z_Manchester/
131 Custom Scenery/EGCC Manchester Mesh/
132 Custom Scenery/APT El Jarde/
133 Custom Scenery/APT GCGM 1.5/
134 Custom Scenery/APT GCHI/
135 Custom Scenery/APT GCLB - El Berriel/
136 Custom Scenery/APT Hvar/
137 Custom Scenery/APT TAGN 2.0/
138 Custom Scenery/Archipielago Chinijo/
139 Custom Scenery/Arlanda_X/
140 Custom Scenery/Austrian_Landmarks_0.01/
141 Custom Scenery/BIRK_10_Reykjavik/
142 Custom Scenery/bla/
143 Custom Scenery/BS2001/
144 Custom Scenery/d_nuernberg_vfr_overlay/
145 Custom Scenery/DD EETN Tallinn XP Documents/
146 Custom Scenery/DD EETN Tallinn XP Layer1/
147 Custom Scenery/DD EETN Tallinn XP Layer2/
148 Custom Scenery/DD Miami City XP/
149 Custom Scenery/DD Miami City XP Documents/
150 Custom Scenery/DD Warsaw City XP Documents/
151 Custom Scenery/EDDP/
152 Custom Scenery/EDHK Kiel Holtenau/
153 Custom Scenery/edhl/
154 Custom Scenery/EDMA Augsburg/
155 Custom Scenery/EDTQ_Pattonville/
156 Custom Scenery/EDXH tdg/
157 Custom Scenery/EDXW Sylt/
158 Custom Scenery/EETN_Tallinn_XP_high/
159 Custom Scenery/EETN_Tallinn_XP_low/
160 Custom Scenery/EETN_Tallinn_XP_med/
161 Custom Scenery/EGBB/
162 Custom Scenery/EGGP - John Lennon Airport/
163 Custom Scenery/EGGW - Luton Airport/
164 Custom Scenery/EGLIN v1.3/
165 Custom Scenery/EGSC_Cambridge 1.2/
166 Custom Scenery/EKCH_Kastrup/
167 Custom Scenery/ELLX Luxembourg/
168 Custom Scenery/ENBR Bergen Flesland/
169 Custom Scenery/ENZV/
170 Custom Scenery/EPGO Goraszka XP9/
171 Custom Scenery/EPPO_X/
172 Custom Scenery/EPWA_Okecie-Warszawa/
173 Custom Scenery/ESSA (SWEDFLIGHT Pro)/
174 Custom Scenery/ETNL Rostock Laage/
175 Custom Scenery/Exclusion_EDHK/
176 Custom Scenery/Exclusion_EDXH/
177 Custom Scenery/Exclusion_EDXW/
178 Custom Scenery/Exclusion_LXGB/
179 Custom Scenery/FALSERIVER v1.2/
180 Custom Scenery/flags_of_the_world/
181 Custom Scenery/FlyTampa-Dubai/
182 Custom Scenery/FlyTampa-Dubai Rebooted/
183 Custom Scenery/FlyTampa-HongKong/
184 Custom Scenery/FlyTampa_Maarten_(FSX)/
185 Custom Scenery/FlyTampa_Montreal_FS9/
186 Custom Scenery/FT-Dubai/
187 Custom Scenery/GCFV Fuerteventura/
188 Custom Scenery/GCLP Gran Canaria 2.1/
189 Custom Scenery/GCTS tdg/
190 Custom Scenery/GOLDEN_GATE_KSFO_XP-10/
191 Custom Scenery/GR_LGSR_Santorini_0.9/
192 Custom Scenery/Groundcrew/
193 Custom Scenery/IT-LICJ/
194 Custom Scenery/IT-LICR 2014/
195 Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/
196 Custom Scenery/KBOS Summer/
197 Custom Scenery/KBOS Winter/
198 Custom Scenery/KEYW Key West International Airport/
199 Custom Scenery/KILM_Overlay/
200 Custom Scenery/KLAS/
201 Custom Scenery/KLAX - Los Angeles/
202 Custom Scenery/KMEM_V9/
203 Custom Scenery/KMHT_Manchester_NH/ (disabled)
204 Custom Scenery/KNEW v2/
205 Custom Scenery/KNPA v2.1/
206 Custom Scenery/KoehlbrandBridge/
207 Custom Scenery/KPDX_Airport/
208 Custom Scenery/KRNO - Reno/
209 Custom Scenery/KSEA Demo Area/
210 Custom Scenery/KSEA Demo Terrain/
211 Custom Scenery/KSFO - San Francisco/
212 Custom Scenery/KSFO - Traffic Golden Gate Bridge/
213 Custom Scenery/KSFO - Traffic Oakland Bay Bridge/
214 Custom Scenery/KTUS Tucson International/
215 Custom Scenery/LA_BATON_ROUGE_METROPOLITAN_KBTR v1.5/
216 Custom Scenery/LAFAYETTE v1.2/
217 Custom Scenery/LEMD tdg/
218 Custom Scenery/LEVT - Vitoria  Gasteiz/
219 Custom Scenery/LFKB tdg/
220 Custom Scenery/LFKJ tdg/
221 Custom Scenery/LFML Marseille Provence/
222 Custom Scenery/LFPG tdg/
223 Custom Scenery/LFTZ1/
224 Custom Scenery/LFTZ2/
225 Custom Scenery/LG_Creta/
226 Custom Scenery/LGAV-Athens/
227 Custom Scenery/LIEO tdg/
228 Custom Scenery/LIMC - Milano Malpensa/
229 Custom Scenery/LIMJ SRD tdg/
230 Custom Scenery/LIMLOverlay/
231 Custom Scenery/London Buildings expanded/
232 Custom Scenery/London_Stansted/
233 Custom Scenery/LOWL Blue Danube Airport Linz 1.0/
234 Custom Scenery/LOWW Wien Schwechat 1.1/
235 Custom Scenery/LRTM - Targu Mures/
236 Custom Scenery/LTAI_Antalya/
237 Custom Scenery/LTBJ/
238 Custom Scenery/LXGB Gibraltar/
239 Custom Scenery/Madeira_1_LPMA/
240 Custom Scenery/Madeira_2_OBJ/
241 Custom Scenery/Madeira_3_TEX/
242 Custom Scenery/Malte_OBJ/
243 Custom Scenery/DAI Media Scenery - 1 - Europe Library/
244 Custom Scenery/Malte_OSM/
245 Custom Scenery/W2xp_Corsica/
246 Custom Scenery/Malte_POL/
247 Custom Scenery/Mega_Airport_Berlin_Brandenburg/
248 Custom Scenery/Mega_Airport_Helsinki/
249 Custom Scenery/Mega_Airport_Oslo_2.0/
250 Custom Scenery/Mega_Airport_Paris_CDG_SC/
251 Custom Scenery/MisterX_Library/
252 Custom Scenery/MMUN/
253 Custom Scenery/MonacoX/
254 Custom Scenery/Nepal Lukla-Everest VNLK v10.3/
255 Custom Scenery/NO v1.0/
256 Custom Scenery/Osm_Europe/ (disabled)
257 Custom Scenery/OpenSceneryX/
258 Custom Scenery/CDB-Library/
259 Custom Scenery/ff_library_extended_LOD/
260 Custom Scenery/German_Landmarks/
261 Custom Scenery/german_obstacles/
262 Custom Scenery/german_traffic_library/
263 Custom Scenery/Osm_Europe_forests/ (disabled)
264 Custom Scenery/Osm_Europe_objects/ (disabled)
265 Custom Scenery/PARIS_DSF/
266 Custom Scenery/PARIS_LFPG_DSF/
267 Custom Scenery/PARIS_suburbs_DSF/
268 Custom Scenery/Quebec_CYQB_Quebec/
269 Custom Scenery/R2_Library/
270 Custom Scenery/RescueX_Lib/
271 Custom Scenery/RescueX_Terrain/
272 Custom Scenery/roads/
273 Custom Scenery/RuegenBridge/
274 Custom Scenery/ruscenery/
275 Custom Scenery/Salt Lake City, UT - KSLC v1/
276 Custom Scenery/San Diego/
277 Custom Scenery/Serviced Aircraft Europe A320/
278 Custom Scenery/Serviced Aircraft Europe A340/
279 Custom Scenery/Serviced Aircraft Europe B737/
280 Custom Scenery/Serviced Aircraft Europe B747/
281 Custom Scenery/FAIB/
282 Custom Scenery/THE-FRUIT-STAND Aircraft Library v2.2/
283 Custom Scenery/Serviced Aircraft North America Part 1/
284 Custom Scenery/Serviced Aircraft North America Part 2/
285 Custom Scenery/Seychelles_X/
286 Custom Scenery/Stralsund-Barth 1.1/
287 Custom Scenery/Sunskyjet_KPHL_FS9_SC/
288 Custom Scenery/Svalbard/
289 Custom Scenery/swiss_alpine_huts_hd/
290 Custom Scenery/Tagoror 2.0 (abreme - open me)/
291 Custom Scenery/Tenerife VFR/
292 Custom Scenery/The_Handy_Objects_Library/
293 Custom Scenery/Tower Bridge/
294 Custom Scenery/Truscenery - EFTP Airport v1.2/
295 Custom Scenery/Truscenery - EFTP Mesh/
296 Custom Scenery/UHDv1_Update_Europe-Alps_ZL17/
297 Custom Scenery/UK - VFR London X v1.30 (FSX) v10 (Aerosoft) Inkl Exclusion zones/
298 Custom Scenery/UKVFR-London Red Bull Air Race/
299 Custom Scenery/Untitled 1/
300 Custom Scenery/USA_NY_JKFK_New York John F. Kennedy Intl Airport v1.0/
301 Custom Scenery/Vehicle Library Extension/
302 Custom Scenery/vehicles/
303 Custom Scenery/Venice_X/
304 Custom Scenery/common_textures/
305 Custom Scenery/Global Airports/
306 Custom Scenery/w2xp_Chisinau/
307 Custom Scenery/world-models/
308 Custom Scenery/Europe_Library/ (disabled)
309 Custom Scenery/w2xp_Europe/ (disabled)
310 Custom Scenery/WASHINGTON NATIONAL/
311 Custom Scenery/Wide Taxiway Markings Library Replacement/
312 Custom Scenery/X-Design - LPPT Lisboa v2.3+HDR/
313 Custom Scenery/XAirportScenery/
314 Custom Scenery/W2xpl_Zuerich/
315 Custom Scenery/XS_Library/
316 Custom Scenery/YSSY Sydney Kingsford Smith (ISDG)/
317 Custom Scenery/EU/
318 Custom Scenery/Patch_HDv2-based_dsf_Photo_Sceneries_ZL16/
319 Custom Scenery/Patch_HDv2-based_dsf_Photo_Sceneries_ZL17/
320 Custom Scenery/z+35+014_GB_Malta_bx18/
321 Custom Scenery/z+38-010_P_Lissabon_bx17/
322 Custom Scenery/z+39+002_E_Baleares_gx17/
323 Custom Scenery/z+39+002_E_Mallorca_bx18/
324 Custom Scenery/z+39+002_E_Mallorca_gx17/
325 Custom Scenery/z+39+003_E_Mallorca_bx18/
326 Custom Scenery/z_salzburg2/
327 Custom Scenery/z+39+003_E_Mallorca_gx17/
328 Custom Scenery/z+39+004_E_Menorca_bx18/
329 Custom Scenery/z+39+023_GR_Skiathos_gx17/
330 Custom Scenery/z+40+003_E_Menorca_bx18/
331 Custom Scenery/z_Calvi/
332 Custom Scenery/z+40+004_E_Menorca_bx18/
333 Custom Scenery/z+41+012_I_Roma_bx17/
334 Custom Scenery/z+43+001_F_Toulouse_bx16/
335 Custom Scenery/z+43+006_F_Cannes_bx16/
336 Custom Scenery/z+45+008_I_Milano_bx17/
337 Custom Scenery/z_Heringsdorf/
338 Custom Scenery/z_Frankfurt/
339 Custom Scenery/z+46+008_CH_Locarno_bx17/
340 Custom Scenery/z+47+011_A_Innsbruck_bx17/
341 Custom Scenery/z+48+011_D_Muenchen_bx17/
342 Custom Scenery/z+48+016_A_Wien_bx17/
343 Custom Scenery/z+49+006_D_Trier_bx16/
344 Custom Scenery/z+50+007_D_Koblenz_bx16/
345 Custom Scenery/z+51+012_D_Leipzig_bx16/
346 Custom Scenery/z+52+004_NL_Amsterdam_bx17/
347 Custom Scenery/z+52+012_D_Brandenburg_bx17/
348 Custom Scenery/z+52+013_D_Berlin_bx17/
349 Custom Scenery/z+53+004_NL_Texel_bx17/
350 Custom Scenery/z+53+008_D_Bremen_bx17/
351 Custom Scenery/z+53+009_D_Hamburg_bx16/
352 Custom Scenery/z+53+010_D_Luebeck_bx17/
353 Custom Scenery/z+54+008_D_Sylt_bx17/
354 Custom Scenery/z+59+024_EST_Tallinn_gx17/
355 Custom Scenery/z+60+024_FIN_Helsinki_gx17/
356 Custom Scenery/zPhotoXP_+50+011_16_Jena_XP10_2012-09/
357 Custom Scenery/z+61-007_DK_Faeroer_gx18/
358 Custom Scenery/z+61-008_DK_Faeroer_gx18/
359 Custom Scenery/z+62-007_DK_Faeroer_gx18/
360 Custom Scenery/z+62-008_DK_Faeroer_gx18/
361 Custom Scenery/z_Chelmsford/
362 Custom Scenery/z_Dublin/
363 Custom Scenery/z_Barcelona/
364 Custom Scenery/z_Dusseldorf/
365 Custom Scenery/z_EDDS/
366 Custom Scenery/z_Frankfurt Nord/
367 Custom Scenery/z_Grenole/
368 Custom Scenery/z_izmir/
369 Custom Scenery/z_Padderorn-Lippstadt/
370 Custom Scenery/z_London/
371 Custom Scenery/z_Lons le Saunier/
372 Custom Scenery/z_LSGG/
373 Custom Scenery/z_Lukla/
374 Custom Scenery/z_Nice/
375 Custom Scenery/z_Nurnberg/
376 Custom Scenery/z_Venice/
377 Custom Scenery/z_Salzburg/
378 Custom Scenery/z_Halle/
379 Custom Scenery/z_zurich/
380 Custom Scenery/ZZZ DD LUKK Chisinau XP Terrain/
381 Custom Scenery/Aerosoft LFKC Calvi 1.0 Mesh/
382 Custom Scenery/JustSim_LFMN_Nice_terrain/
383 Custom Scenery/zPhotoXP_+46+007_16_Thun_XP10_2012-09/
384 Custom Scenery/zPhotoXP_+48+008_16_Freudenstadt_XP10_2012-09/
385 Custom Scenery/zPhotoXP_+49+009_16_Heilbronn_XP10_2012-09/
386 Custom Scenery/zz_GR_+36+025_GR_Thira_gx17/
387 Custom Scenery/ZZZZ DD EPWA Warsaw Chopin Airport XP Terrain/
388 Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 c/
389 Custom Scenery/ZZZ Canarias SHD Photo z17 1.0/
390 Custom Scenery/ZZZ Canarias SHD 3.0/
391 Custom Scenery/ZZZ DD EETN Tallinn XP Terrain/
392 Custom Scenery/ZZZ DD Miami City XP Terrain/
393 Custom Scenery/ZZZ DD Warsaw City XP Terrain/
394 Custom Scenery/ZZZ TAGN 2.0 (XP10)/
395 Custom Scenery/zzz_hd_global_scenery2/
396 Custom Scenery/zzz_Treelines_Farms_Europe_v2/
397 Global Scenery/Bug Fixes/
398 Global Scenery/Extra Islands/
399 Global Scenery/Recuts 1030/
400 Global Scenery/X-Plane 10 Global Scenery/
401 Resources/default scenery/1000 autogen/
402 Resources/default scenery/1000 decals/
403 Resources/default scenery/1000 forests/
404 Resources/default scenery/1000 roads/
405 Resources/default scenery/1000 urban terrain/
406 Resources/default scenery/1000 world terrain/
407 Resources/default scenery/700 roads/
408 Resources/default scenery/900 beaches/
409 Resources/default scenery/900 europe objects/
410 Resources/default scenery/900 forests/
411 Resources/default scenery/900 roads/
412 Resources/default scenery/900 us objects/
413 Resources/default scenery/900 world object placeholders/
414 Resources/default scenery/airport decals/
415 Resources/default scenery/airport scenery/
416 Resources/default scenery/default apt dat/
417 Resources/default scenery/default atc/
418 Resources/default scenery/sim objects/

0:00:00.000 D/HID: HID Bridge Running
Fetching plugins for Custom Scenery/Aerosoft LFKC Calvi 1.0 Airport/plugins

Loaded: Custom Scenery/Aerosoft LFKC Calvi 1.0 Airport/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft LFKC Calvi 1.0 Airport).

GroundTraffic: Note: Ignoring duplicate waypoint at line 1522
GroundTraffic: Note: Ignoring duplicate waypoint at line 1753
GroundTraffic: Note: Ignoring duplicate waypoint at line 1982
GroundTraffic: Note: Ignoring duplicate waypoint at line 2208
GroundTraffic: Note: Ignoring duplicate waypoint at line 2426
GroundTraffic: Note: Ignoring duplicate waypoint at line 2660
GroundTraffic: Note: Ignoring duplicate waypoint at line 2892
GroundTraffic: Note: Ignoring duplicate waypoint at line 3119
GroundTraffic: Note: Ignoring duplicate waypoint at line 3337
GroundTraffic: Note: Ignoring duplicate waypoint at line 3559
GroundTraffic: Note: Ignoring duplicate waypoint at line 3769
GroundTraffic: Note: Ignoring duplicate waypoint at line 4001
Fetching plugins for Custom Scenery/JustSim_LFMN_Nice/plugins

Loaded: Custom Scenery/JustSim_LFMN_Nice/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.JustSim_LFMN_Nice).

Fetching plugins for Custom Scenery/Digital Design - LOWS Salzburg/plugins

Loaded: Custom Scenery/Digital Design - LOWS Salzburg/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Digital Design - LOWS Salzburg).

Fetching plugins for Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 a/plugins

Loaded: Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 a/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft LSZH Airport Zurich V2.0 a).

GroundTraffic: Note: Ignoring duplicate waypoint at line 1837
GroundTraffic: Note: Ignoring duplicate waypoint at line 2107
Fetching plugins for Custom Scenery/KAVX - Catalina Airport/plugins

Loaded: Custom Scenery/KAVX - Catalina Airport/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.KAVX - Catalina Airport).

Fetching plugins for Custom Scenery/KSEA Boeing Country 10.5/plugins

Loaded: Custom Scenery/KSEA Boeing Country 10.5/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.KSEA Boeing Country 10.5).

Fetching plugins for Custom Scenery/DD EPWA Warsaw Chopin Airport XP/plugins

Loaded: Custom Scenery/DD EPWA Warsaw Chopin Airport XP/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.DD EPWA Warsaw Chopin Airport XP).

Fetching plugins for Custom Scenery/Aerosoft - EDDH Airport Hamburg/plugins

Loaded: Custom Scenery/Aerosoft - EDDH Airport Hamburg/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft - EDDH Airport Hamburg).

GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - EDDH Airport Hamburg
Fetching plugins for Custom Scenery/Aerosoft - EDFH Airport Frankfurt-Hahn/plugins

Loaded: Custom Scenery/Aerosoft - EDFH Airport Frankfurt-Hahn/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft - EDFH Airport Frankfurt-Hahn).

GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - EDFH Airport Frankfurt-Hahn
Fetching plugins for Custom Scenery/Aerosoft - EGLL Airport London-Heathrow/plugins

Loaded: Custom Scenery/Aerosoft - EGLL Airport London-Heathrow/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft - EGLL Airport London-Heathrow).

Fetching plugins for Custom Scenery/Aerosoft - LFBO Toulouse Airport/plugins

Loaded: Custom Scenery/Aerosoft - LFBO Toulouse Airport/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Aerosoft - LFBO Toulouse Airport).

GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - LFBO Toulouse Airport
Fetching plugins for Custom Scenery/EGCC Manchester Airport/plugins

Loaded: Custom Scenery/EGCC Manchester Airport/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.EGCC Manchester Airport).

Fetching plugins for Custom Scenery/APT TAGN 2.0/plugins

Loaded: Custom Scenery/APT TAGN 2.0/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.APT TAGN 2.0).

Loaded: Custom Scenery/APT TAGN 2.0/plugins/PrecissionLanding/64/win.xpl (info.wikipau.tag.precission).

Fetching plugins for Custom Scenery/Arlanda_X/plugins

Loaded: Custom Scenery/Arlanda_X/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Arlanda_X).

GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Arlanda_X
Fetching plugins for Custom Scenery/EDXW Sylt/plugins

Loaded: Custom Scenery/EDXW Sylt/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.EDXW Sylt).

GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\EDXW Sylt
Fetching plugins for Custom Scenery/GR_LGSR_Santorini_0.9/plugins

Loaded: Custom Scenery/GR_LGSR_Santorini_0.9/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.GR_LGSR_Santorini_0.9).

Fetching plugins for Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/plugins

Loaded: Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014).

Fetching plugins for Custom Scenery/KSFO - San Francisco/plugins

Loaded: Custom Scenery/KSFO - San Francisco/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.KSFO - San Francisco).

Fetching plugins for Custom Scenery/KSFO - Traffic Golden Gate Bridge/plugins

Loaded: Custom Scenery/KSFO - Traffic Golden Gate Bridge/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.KSFO - Traffic Golden Gate Bridge).

Fetching plugins for Custom Scenery/KSFO - Traffic Oakland Bay Bridge/plugins

Loaded: Custom Scenery/KSFO - Traffic Oakland Bay Bridge/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.KSFO - Traffic Oakland Bay Bridge).

Fetching plugins for Custom Scenery/Tower Bridge/plugins

Loaded: Custom Scenery/Tower Bridge/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Tower Bridge).

Fetching plugins for Custom Scenery/Truscenery - EFTP Airport v1.2/plugins

Loaded: Custom Scenery/Truscenery - EFTP Airport v1.2/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.Truscenery - EFTP Airport v1.2).

Fetching plugins for Custom Scenery/X-Design - LPPT Lisboa v2.3+HDR/plugins

Loaded: Custom Scenery/X-Design - LPPT Lisboa v2.3+HDR/plugins/GroundTraffic/64/win.xpl (Marginal.GroundTraffic.X-Design - LPPT Lisboa v2.3+HDR).

Found an illegal name for a runway end ("H109H109") at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end ("H109") at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end ("H108H108") at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end ("H108") at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
Could not find tile 1 name is A
Could not find tile 49 name is close-frame
 (in sign '{@B}A' from airport LSZA:Custom Scenery/Aerosoft - LSZA Lugano Airport/Earth nav data/apt.dat)
Could not find tile 52 name is ^u
Could not find tile 49 name is close-frame
Could not find tile 51 name is ^r
Could not find tile 49 name is close-frame
 (in sign '{@L}Z{^u}{@Y}L{@L}N{^r}' from airport LSZA:Custom Scenery/Aerosoft - LSZA Lugano Airport/Earth nav data/apt.dat)
Could not find tile 0 name is ____none____
Could not find tile 49 name is close-frame
 (in sign '{@B}{_}{@L}Z{@R}19-01' from airport LSZA:Custom Scenery/Aerosoft - LSZA Lugano Airport/Earth nav data/apt.dat)
Could not find tile 48 name is open-frame
Could not find tile 49 name is close-frame
 (in sign '{@Y}{^lu}AA1{@L}A|{@Y}AA2{^u}' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Could not find tile 48 name is open-frame
Could not find tile 49 name is close-frame
 (in sign '{@Y}{^l}34L{@L}L2|{@Y}{^r}16R' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Could not find tile 48 name is open-frame
Could not find tile 49 name is close-frame
 (in sign '{@Y}{^l}34R{@L}L2|{@Y}16R{^r}' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Could not find tile 48 name is open-frame
Could not find tile 49 name is close-frame
 (in sign '{@Y}{^lu}BB{@L}B|{@Y}{^rd}N' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Could not find tile 48 name is open-frame
Could not find tile 49 name is close-frame
 (in sign '{@Y}{^l}B|{@L}BE|{@Y}{^u}BT|{^r}B' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Could not find tile 54 name is ^lu
Could not find tile 48 name is open-frame
Could not find tile 55 name is ^ru
 (in sign '{@L}H{^lu}D|{^ru}H' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Syntax error - unknown glyph p
Syntax error - unknown glyph p
 (in sign '{@L}C{@@}{@R}25_App{@L}C' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Syntax error - unknown glyph at {@Y}{^l}A{^r}|{^u}Y
Syntax error - unknown glyph at {^l}A{^r}|{^u}Y
Syntax error - unknown glyph at A{^r}|{^u}Y
Syntax error - unknown glyph at |{^u}Y
Syntax error - missing closing brace.
 (in sign '{no-entry}{@L}AG{@@}{@L}AG{{@Y}{^l}A{^r}|{^u}Y' from airport LIRF:Custom Scenery/IT-LIRF Roma Fiumicino Leonardo Da Vinci XP 2014/Earth nav data/apt.dat)
Syntax error - unknown glyph at {@R}4L-22R{^u}{@@}F
Syntax error - unknown glyph at 4L-22R{^u}{@@}F
Syntax error - unknown glyph at {@@}F
Syntax error - missing closing brace.
 (in sign '{{@R}4L-22R{^u}{@@}F' from airport KBTR:Custom Scenery/LA_BATON_ROUGE_METROPOLITAN_KBTR v1.5/Earth nav data/apt.dat)
ATC audio initialized.
0:00:00.000 E/APT: The airport GCXM ([H] Tenerife Norte - Los Rodeos helipuerto) has lost some controllers due to bad frequencies.  Each controller needs at least one frequency in the range of 118.0 to 136.0 mhz.
0:00:00.000 W/WARNING: airport %s (%s) has an 850-style runway with water as a surface type.
: TACOMA NARROWS SPB
0:00:00.000 W/WARNING: airport %s (%s) has an 850-style runway with water as a surface type.
: Barcelona Sea plane
0:00:00.000 W/WARNING: airport %s (%s) has an 850-style runway with water as a surface type.
: Treasure Island
0:00:00.000 W/WARNING: airport %s (%s) has an 850-style runway with water as a surface type.
: Treasure Island
0:00:00.000 W/WARNING: airport %s (%s) has an 850-style runway with water as a surface type.
: Commodore Seaplane Sausalito
0:00:00.000 I/REN: Setting |draw view indicator read from prefs as 0.
0:00:00.000 I/REN: Setting |dim under high G-load or hypoxia read from prefs as 0.
0:00:00.000 I/REN: Setting |draw hi-res planet textures from orbit read from prefs as 0.
0:00:00.000 I/REN: Setting |draw forest fires and balloons read from prefs as 0.
0:00:00.000 I/REN: Setting |draw birds and deer in nice weather read from prefs as 0.
0:00:00.000 I/REN: Setting |draw aircraft carriers and frigates read from prefs as 0.
0:00:00.000 I/REN: Setting |draw Aurora Borealis read from prefs as 0.
0:00:00.000 I/REN: Setting |number of trees read from prefs as 4.
0:00:00.000 I/REN: Setting |number of objects read from prefs as 5.
0:00:00.000 I/REN: Setting |number of roads read from prefs as 2.
0:00:00.000 I/REN: Setting |number of cars read from prefs as 2.
0:00:00.000 I/REN: Setting |world detail distance read from prefs as 2.
0:00:00.000 I/REN: Setting |runway and taxiway smoothness and lighting read from prefs as 3.
0:00:00.000 I/REN: Setting |water reflection detail read from prefs as 1.
0:00:00.000 I/REN: Setting compress textures to save VRAM read from prefs as 1.
0:00:00.000 I/REN: Setting |runways follow terrain contours read from prefs as 1.
0:00:00.000 I/REN: Setting |draw volumetric fog read from prefs as 1.
0:00:00.000 I/REN: Setting |draw per pixel lighting read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR rendering read from prefs as 1.
0:00:00.000 I/REN: Setting |shadow detail read from prefs as 0.
0:00:00.000 I/REN: Setting |atmospheric scattering read from prefs as 1.
0:00:00.000 I/REN: Setting |HDR anti-aliasing read from prefs as 2.
0:00:00.000 I/REN: Setting |3-D bump-maps read from prefs as 1.
0:00:00.000 I/REN: Setting |gritty detail textures read from prefs as 1.
0:00:00.000 I/REN: Setting |Extended DSF Scenery read from prefs as 0.
0:00:00.000 I/REN: Setting |draw parked aircraft at airports read from prefs as 0.
0:00:00.000 I/NET: Hamachi 2620:9b::1971:618a
0:00:00.000 I/NET: Hamachi 25.113.97.138
0:00:00.000 I/NET: Ethernet 2003:46:a02:f309:240e:e3f7:8087:9e2
0:00:00.000 I/NET: Ethernet 2003:46:a02:f309:b537:d582:7280:1981
0:00:00.000 I/NET: Ethernet 192.168.2.106
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Twr because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Twr because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Twr because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Gnd because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Skipping controller OMDB:atc_ControllerRole_Twr because a higher priority scenery pack made them already.
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LUKK and LUKK!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LUKK and LUKK!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at TNCM and TNCM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at TNCM and TNCM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LGSK and LGSK!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENEV and ENEV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENEV and ENEV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENEV and ENEV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENHD and ENHD!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENHD and ENHD!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENTC and ENTC!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENKR and ENKR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENKR and ENKR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENKR and ENKR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENDU and ENDU!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENDU and ENDU!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENGM and ENGM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENTO and ENTO!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENNA and ENNA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENNA and ENNA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENNA and ENNA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENNM and ENNM!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENBR and ENBR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENBR and ENBR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENBR and ENBR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENBR and ENBR!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENRY and ENRY!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENAT and ENAT!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENAT and ENAT!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENAL and ENAL!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENAL and ENAL!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENAL and ENAL!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENZV and ENZV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENZV and ENZV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENZV and ENZV!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENVA and ENVA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENCN and ENCN!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENCN and ENCN!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENCN and ENCN!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENKB and ENKB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENKB and ENKB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ENML and ENML!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LEPA and LEPA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LESB and LESB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ESSA and ESSA!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at EPPO and EPPO!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at OMDB and OMDB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at OMDB and OMDB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at OMDB and OMDB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at OMSJ and OMSJ!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LTBJ and LTBJ!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LTBJ and LTBJ!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LFPG and LFPG!
0:00:00.000 W/ATC: Rewrote LUKK atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LUKK atc_ControllerRole_Gnd's freq: 12180 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 11900 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 12180 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 12900 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr's freq: 12070 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 12900 to 11810 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr's freq: 12900 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr's freq: 13150 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 12395 to 11817 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd's freq: 12395 to 11820 for being in conflict!
0:00:00.000 W/ATC: Rewrote TNCM atc_ControllerRole_Twr's freq: 11870 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote TNCM atc_ControllerRole_Gnd's freq: 13000 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote LGSK atc_ControllerRole_Twr's freq: 12325 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENEV atc_ControllerRole_Gnd's freq: 12177 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENEV atc_ControllerRole_Twr's freq: 11800 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENEV atc_ControllerRole_Twr's freq: 12010 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENHD atc_ControllerRole_Twr's freq: 12050 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENHD atc_ControllerRole_Twr's freq: 12110 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENTC atc_ControllerRole_Twr's freq: 11830 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENKR atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENKR atc_ControllerRole_Twr's freq: 12035 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENKR atc_ControllerRole_Twr's freq: 12210 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENDU atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENDU atc_ControllerRole_Twr's freq: 12210 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Del's freq: 12160 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Gnd's freq: 12167 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Gnd's freq: 12172 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Gnd's freq: 12192 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Twr's freq: 11830 to 11810 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Twr's freq: 11870 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Twr's freq: 12010 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Twr's freq: 12332 to 11817 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENGM atc_ControllerRole_Twr's freq: 12887 to 11820 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENTO atc_ControllerRole_Twr's freq: 11865 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENNA atc_ControllerRole_Twr's freq: 11805 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENNA atc_ControllerRole_Twr's freq: 11890 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENNA atc_ControllerRole_Twr's freq: 12210 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENNM atc_ControllerRole_Twr's freq: 11855 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENBR atc_ControllerRole_Gnd's freq: 12185 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENBR atc_ControllerRole_Gnd's freq: 12190 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENBR atc_ControllerRole_Twr's freq: 11910 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENBR atc_ControllerRole_Twr's freq: 12210 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENRY atc_ControllerRole_Twr's freq: 11950 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENAT atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENAT atc_ControllerRole_Twr's freq: 12040 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENAL atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENAL atc_ControllerRole_Twr's freq: 11985 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENAL atc_ControllerRole_Twr's freq: 12210 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENZV atc_ControllerRole_Gnd's freq: 12175 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENZV atc_ControllerRole_Twr's freq: 11835 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENZV atc_ControllerRole_Twr's freq: 12210 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENVA atc_ControllerRole_Twr's freq: 11940 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENCN atc_ControllerRole_Twr's freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENCN atc_ControllerRole_Twr's freq: 11995 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENCN atc_ControllerRole_Twr's freq: 12210 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENKB atc_ControllerRole_Twr's freq: 11830 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENKB atc_ControllerRole_Twr's freq: 12120 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ENML atc_ControllerRole_Twr's freq: 11985 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Del's freq: 12160 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Gnd's freq: 12170 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Gnd's freq: 12190 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Gnd's freq: 13025 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Twr's freq: 11830 to 11810 for being in conflict!
0:00:00.000 W/ATC: Rewrote LEPA atc_ControllerRole_Twr's freq: 11845 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote LESB atc_ControllerRole_Twr's freq: 13025 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Del's freq: 12182 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Gnd's freq: 12170 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Gnd's freq: 12192 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Gnd's freq: 12197 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Twr's freq: 11850 to 11810 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Twr's freq: 12330 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote ESSA atc_ControllerRole_Twr's freq: 12512 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote EPPO atc_ControllerRole_Twr's freq: 11997 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote OMDB atc_ControllerRole_Gnd's freq: 11835 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote OMDB atc_ControllerRole_Gnd's freq: 11885 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote OMDB atc_ControllerRole_Twr's freq: 11875 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote OMSJ atc_ControllerRole_Twr's freq: 11860 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote LTBJ atc_ControllerRole_Gnd's freq: 12190 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LTBJ atc_ControllerRole_Twr's freq: 11810 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Del's freq: 12172 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Del's freq: 12665 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 11810 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 11955 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 12160 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 12177 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 12180 to 11817 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 12192 to 11820 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Gnd's freq: 12197 to 11822 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 11865 to 11825 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 11925 to 11827 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 12065 to 11830 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 12090 to 11832 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 12360 to 11835 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 12532 to 11837 for being in conflict!
0:00:00.000 W/ATC: Rewrote LFPG atc_ControllerRole_Twr's freq: 12532 to 11842 for being in conflict!
0:00:00.000 D/HID: Hardware ADDED(044f, b108) - T.Flight Hotas X at path \\?\hid#vid_044f&pid_b108#7&1ac98da4&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
0:00:00.000 I/JOY: REGISTER Joystick device: T.Flight Hotas X - VID:1103PID:45320, this is a familiar device.
0:00:00.000 D/HID:     BUTTON Added Index: 0 (HID_Page_Button/01) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 1 (HID_Page_Button/02) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 2 (HID_Page_Button/03) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 3 (HID_Page_Button/04) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 4 (HID_Page_Button/05) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 5 (HID_Page_Button/06) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 6 (HID_Page_Button/07) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 7 (HID_Page_Button/08) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 8 (HID_Page_Button/09) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 9 (HID_Page_Button/0a) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 10 (HID_Page_Button/0b) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     BUTTON Added Index: 11 (HID_Page_Button/0c) for handle: 00000000AD76AAB0
0:00:00.000 D/HID:     HATSWITCH Added Index: 0 (HID_Page_GenericDesktop/HID_Usage_GD_Hatswitch) for handle: 00000000AD76AAB0. It has 8 positions.
0:00:00.000 D/HID:     AXIS Added Index: 0 (HID_Page_GenericDesktop/HID_Usage_GD_X) for handle: 00000000AD76AAB0. Min/Max 0 - 1023
0:00:00.000 D/HID:     AXIS Added Index: 1 (HID_Page_GenericDesktop/HID_Usage_GD_Y) for handle: 00000000AD76AAB0. Min/Max 0 - 1023
0:00:00.000 D/HID:     AXIS Added Index: 2 (HID_Page_GenericDesktop/HID_Usage_GD_Slider) for handle: 00000000AD76AAB0. Min/Max 0 - 255
0:00:00.000 D/HID:     AXIS Added Index: 3 (HID_Page_GenericDesktop/HID_Usage_GD_Rz) for handle: 00000000AD76AAB0. Min/Max 0 - 255
0:00:00.000 D/HID:     AXIS Added Index: 4 (HID_Page_GenericDesktop/HID_Usage_GD_Z) for handle: 00000000AD76AAB0. Min/Max 0 - 255
0:00:00.000 D/HID:     SKIPPED (ff00/2b) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/2a) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/29) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/28) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/27) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/26) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/25) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/24) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/23) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/22) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/21) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID:     SKIPPED (ff00/20) for handle: 00000000AD76AAB0 because of usage page.
0:00:00.000 D/HID: END HARDWARE
0:00:00.000 E/JOY: UNCALIBRATED AXIS DETECTED: T.Flight Hotas X - VID:1103PID:45320 Axis #2: device min/max (0.000000 - 255.000000) calib (0.000000 - 0.580392)
0:00:02.904 I/ACF: Loading airplane number 0 with Aircraft/Boeing767-300ERv1112/767-300ER.acf

D:\Program Files (x86)\X-Plane 10\Resources\plugins\FJCC_FMC\ufmc_sid.dat
G64:  12.016: Aircraft Details:
G64:  12.016:         Author: (FlightFactor and StepToSky)
G64:  12.016:    Description: (Boeing 767 300ER with PW4062)
G64:  12.016:  Relative Path: (Aircraft/Boeing767-300ERv1112/767-300ER.acf)
G64:  12.016:       MD5 Hash: (6bc5915bf948e3bf9986f7161ebc2d0b)
G64:  12.016: Plugin Mode: CE
G64:  12.016: Trigger: ScriptedReboot..
G64:  12.016: Run('OnBeforeReboot')
G64:  12.016: GizmoCore::Stop()..
G64:  12.017: GizmoCore::Start()..
G64:  12.019: Boot Count: 2
Fetching plugins for D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins

[757767] Loading ...
[757767] Loading version: 1.4.1+cc82088
[757767] Getting host info ... 
[757767] Getting host info  - done.
[757767] Recognizing model ... 
[757767] Recognizing model  - done.
[757767] Recognizing engines in override mode ... 
[757767] Engines recognized as: PW (Pratt & Whitney)
[757767] Recognizing engines - done.
[757767] Loading for model: 767-300ER.acf; Model version: 1.1.12
[757767] Loaded.
Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/757767Avionics/64/win.xpl (ru.stsff.757767avionics).

Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/FF_Effects/64/win.xpl (ru.ffsts.effects).

Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/FF_MouseHandler/64/win.xpl (ru.ffsts.mousehandler).

Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/FF_PluginManager/64/win.xpl (FFSTSpluginmanager).

Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/TGDS/64/win.xpl (ru.ffsts.tgds).

[REFL] Flight Factor and StepToSky : X-Reflections version: 1.1.0-release+c8c79db.[Jul 21 2016 17:40:42]
[REFL] GLEW version: 1.11.0
Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/X-Reflections/64/win.xpl (ru.ffsts.xreflections).

[SASL] Starting...
X-Plane scriptable avionics library plugin snapshot 2.4.13 20160722 Commercial Edition
Loaded: D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/sasl/64/win.xpl (1-sim.sasl).

[757767] Skip the first enable attempt. Waiting for enabling through external plugins or manually.
[FF Effects] Waiting for the Aircraft Plugin Manager or for manual enabling
[FF Mouse Handler] Waiting for the Aircraft Plugin Manager or for manual enabling
[FF Plugin Manager] Enabling version 1.2.6+7241072...
[TGDS] Waiting for the Aircraft Plugin Manager of for manual enabling
[REFL] Skip the first enable attempt. Waiting for enabling through external plugins or manually.
[SASL] Path to panel: D:\Program Files (x86)\X-Plane 10\Aircraft\Boeing767-300ERv1112\aircraft.key
[SASL] Loading avionics...
[SASL INFO] loading    panel
[SASL INFO] including    variables.lua
[SASL INFO] including    variables767.lua
[SASL INFO] loading    panel1
[SASL INFO] loading    clickable
[SASL INFO] loading    rectangle
[SASL INFO] loading    checklist_panel
[SASL INFO] loading    cold_screen
[SASL INFO] loading    oxyMask
[SASL INFO] loading    messege
[SASL INFO] loading    soundTunningPanel
[SASL INFO] including    math.lib.lua
[SASL INFO] "panel"    common version 2.2.0+33eba28
[SASL INFO] loading    tester
[SASL INFO] loading    optimization
[SASL INFO] loading    definitions
[SASL INFO] loading    time_logic
[SASL INFO] loading    start
[SASL INFO] loading    menu
[SASL INFO] including    loadingData_init.lua
[SASL INFO] including    menu_init.lua
[SASL INFO] including    menu_draw.lib.lua
[SASL INFO] loading    menu_draw
[SASL INFO] loading    page_general
[SASL INFO] loading    page_ground
[SASL INFO] loading    page_airplane
[SASL INFO] loading    page_failures
[SASL INFO] loading    page_avionics
[SASL INFO] loading    page_about
[SASL INFO] loading    page_pa
[SASL INFO] loading    page_interact
[SASL INFO] loading    page_sound
[SASL INFO] loading    page_effects
[SASL INFO] loading    failures
[SASL INFO] loading    power
[SASL INFO] loading    animations2
[SASL INFO] loading    lighting
[SASL INFO] loading    pushback
[SASL INFO] loading    elec
[SASL INFO] loading    engines
[SASL INFO] loading    air
[SASL INFO] loading    deice
[SASL INFO] loading    general
[SASL INFO] loading    fuel
[SASL INFO] loading    hydraulics
[SASL INFO] loading    flightcontrols
[SASL INFO] loading    gear
[SASL INFO] loading    fire
[SASL INFO] loading    AP
[SASL INFO] loading    terrwxr
[SASL INFO] loading    GPWS
[SASL INFO] loading    CC
[SASL INFO] loading    cockpit_sound
[SASL INFO] loading    engine_controller
[SASL INFO] loading    radio
[SASL INFO] loading    warnings
[SASL INFO] loading    rain
[SASL INFO] loading    instruments
[SASL INFO] loading    EICAS
[SASL INFO] loading    chart
[SASL INFO] loading    chartPopup
[SASL INFO] including    png.lib.lua
[SASL INFO] loading    sound
[SASL INFO] loading    InEngineSounds
[SASL INFO] loading    engine_sound
[SASL INFO] loading    PA
[SASL INFO] loading    reflections
[SASL INFO] including    lib.vector.lua
[SASL INFO] loading    vihecles
[SASL INFO] loading    wheel_new
[SASL INFO] including    wheel_objs.lib.lua
[SASL INFO] loading    cockpitHelper
[SASL INFO] loading    mask_screen_logic
[SASL INFO] loading    cold_screen_logic
[SASL INFO] loading    messege_logic
[SASL INFO] loading    checklist_panel_logic
[SASL INFO] loading    panel_logic
[SASL INFO] Avionics loaded
[SASL] Found no-self-enable option, waiting for the Aircraft Plugin Manager or for manual enabling

D:\Program Files (x86)\X-Plane 10\Resources\plugins\FJCC_FMC\ufmc_sid.dat
G64:  27.227: Livery Details:
G64:  27.227:   Folder: (Aircraft/Boeing767-300ERv1112/)
G64:  27.227:     Name: ()
WARNING: the named light FD_LED_blue_01 does not exist.
ERROR: object Custom Scenery/RescueX_Lib/cars/Polizei_FuStw_01_lit.obj has a bad light name: FD_LED_blue_01
WARNING: the named light FD_LED_blue_02 does not exist.
ERROR: object Custom Scenery/RescueX_Lib/cars/Polizei_FuStw_01_lit.obj has a bad light name: FD_LED_blue_02
WARNING: the named light FD_LED_blue_01 does not exist.
ERROR: object Custom Scenery/RescueX_Lib/cars/NEF_Passat_sb1099_lit.obj has a bad light name: FD_LED_blue_01
WARNING: the named light FD_LED_blue_02 does not exist.
ERROR: object Custom Scenery/RescueX_Lib/cars/NEF_Passat_sb1099_lit.obj has a bad light name: FD_LED_blue_02
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
0:00:02.904 I/FLT: Init dat_p0 type:loc_tak apt:LSZH rwy:16
0:00:02.904 I/SCN: DSF load time: 684257 for file Custom Scenery/RescueX_Lib/Earth nav data/+40+000/+46+007.dsf (0 tris)
0:00:02.904 I/SCN: DSF load time: 1015307 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+46+009.dsf (0 tris)
0:00:02.904 I/SCN: DSF load time: 939603 for file Custom Scenery/swiss_alpine_huts_hd/Earth nav data/+40+000/+46+007.dsf (0 tris)
0:00:02.904 I/SCN: DSF load time: 556879 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+46+007.dsf (0 tris)
0:00:02.904 I/SCN: DSF load time: 2101776 for file Custom Scenery/zPhotoXP_+46+007_16_Thun_XP10_2012-09/Earth nav data/+40+000/+46+007.dsf (418560 tris)
0:00:02.904 I/SCN: DSF load time: 15266 for file Custom Scenery/04 VFR_Germany_3/Earth nav data/+40+000/+47+007.dsf (0 tris)
0:00:02.904 I/SCN: DSF load time: 43853 for file Custom Scenery/german_obstacles/Earth nav data/+40+000/+47+007.dsf (0 tris)
0:00:02.904 E/SCN: Custom Scenery/Global Airports/Earth nav data/+40+000/+47+007.dsf:
0:00:02.904 E/SCN: Unable to load object file: Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
0:00:02.904 E/SCN: Custom Scenery/Global Airports/Earth nav data/+40+000/+47+007.dsf:
0:00:02.904 E/SCN: Unable to load object file: Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj
0:00:25.167 I/SCN: DSF load time: 229113 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+47+007.dsf (0 tris)
0:00:26.500 E/SYS: +-------------------------------------------------------------------------------
0:00:26.500 E/SYS: | There was a problem loading the scenery package:
0:00:26.500 E/SYS: | Custom Scenery/Global Airports/
0:00:26.500 E/SYS: | The scenery may not look correct.
0:00:26.500 E/SYS: | Please see the log.txt file for detailed error information.
0:00:26.500 E/SYS: | (io_dsf.cpp:685)
0:00:26.500 E/SYS: +-------------------------------------------------------------------------------
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/cars_police_bmw3.obj: the file cannot be opened.
Failed to open Custom Scenery/german_traffic_library/vehicles/car_ambulance.obj: the file cannot be opened.
0:00:26.500 I/SCN: DSF load time: 30254401 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+40+000/+46+009.dsf (3683458 tris)
0:00:26.500 I/SCN: DSF load time: 25596 for file Custom Scenery/04 VFR_Germany_3/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 220 for file Custom Scenery/Aerosoft - Flylogic - LSZR Altenrhein zExclusions/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 1026 for file Custom Scenery/german_obstacles/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 27740242 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+40+000/+47+007.dsf (2607282 tris)
0:00:26.500 I/SCN: DSF load time: 82174 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+47+009.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 29035999 for file Custom Scenery/zzz_hd_global_scenery2/Earth nav data/+40+000/+47+009.dsf (3153131 tris)
0:00:26.500 I/SCN: DSF load time: 166965 for file Custom Scenery/Aerosoft - LSZA Lugano Airport/Earth nav data/+40+000/+46+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 24370 for file Custom Scenery/Aerosoft - LSZA Lugano Scenery/Earth nav data/+40+000/+46+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 283 for file Custom Scenery/Aerosoft - LSZA Lugano zExclusions/Earth nav data/+40+000/+46+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 114327 for file Custom Scenery/swiss_alpine_huts_hd/Earth nav data/+40+000/+46+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 27632 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+46+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 4736189 for file Custom Scenery/z+46+008_CH_Locarno_bx17/Earth nav data/+40+000/+46+008.dsf (1692417 tris)
0:00:26.500 E/OBJ: The object Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 a/Objects/Vehicles/staticaircrafts/CRJ700_misc.obj has unbalanced anim begins.
0:00:26.500 I/SCN: DSF load time: 2417451 for file Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 a/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 220555 for file Custom Scenery/Aerosoft LSZH Airport Zurich V2.0 b/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 26118 for file Custom Scenery/04 VFR_Germany_3/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 1466 for file Custom Scenery/german_obstacles/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 59165 for file Custom Scenery/RescueX_Lib/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 159515 for file Custom Scenery/Global Airports/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 6384627 for file Custom Scenery/W2xpl_Zuerich/Earth nav data/+40+000/+47+008.dsf (0 tris)
0:00:26.500 I/SCN: DSF load time: 9258992 for file Custom Scenery/z_zurich/Earth nav data/+40+000/+47+008.dsf (3397762 tris)
0:00:26.500 E/DSF: The DSF Custom Scenery/W2xpl_Zuerich/Earth nav data/+40+000/+47+008.dsf has a number of problems with its road network: 58 doubled nodes, 1 direction reverses, 0 short segments, 32 roads deleted.
0:02:18.025 E/NET: Download failed with http error: 404 for URL http://weather.noaa.gov/pub/data/observations/metar/cycles/12Z.TXT
FlyWithLua: User switched to a new airport (or changed the plane). Script files have to be reloaded.
FlyWithLua Info: Lua engine (re)started. LUA_RUN = 1, SDK_VERSION = 210, XPLANE_VERSION = 10500, XPLANE_LANGUAGE = German and XPLANE_HOSTID = 1
FlyWithLua Info: Discovered 13 HID devices.
FlyWithLua Info: Load ini file.
FlyWithLua Info: Searching for Lua script files
FlyWithLua Info: Sorting Lua script files
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
RTH_prefs_1.txt LOADED
FlyWithLua Error: nothing to say.
RTH_prefs_1.txt SAVED
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/RTH.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/dazzle.lua
FlyWithLua Info: Start loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: Finished loading script file Resources/plugins/FlyWithLua/Scripts/zzz_viz.lua
FlyWithLua Info: All script files loaded successfully.
XPrealWX: Init Plugin
XPrealWX: init Settings
XPrealWX: init Server
XPlane=10500, XPLM-DLL=210XPrealWX: init server callbacks
XPrealWX: init Hotkeys
XPrealWX: autostart server
XPrealWX: Server Started
XPrealWX: init infowindow
GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - EDDH Airport Hamburg
GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - EDFH Airport Frankfurt-Hahn
GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Aerosoft - LFBO Toulouse Airport
GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\Arlanda_X
GroundTraffic: Can't find groundtraffic.txt in D:\Program Files (x86)\X-Plane 10\Custom Scenery\EDXW Sylt
0:02:19.896 E/WXR: Download of http://weather.noaa.gov/pub/data/observations/metar/cycles/12Z.TXT failed with 2:404 (Error 2:404) at Thu Aug 25 13:51:04 2016
G64: 148.566: Trigger: Run('OnBoot')
SkyMaxx Pro: METAR parser enabled
SMPMetarBridge: METAR activation fired.

D:\Program Files (x86)\X-Plane 10\Resources\plugins\FJCC_FMC\ufmc_sid.dat
G64: 193.949: Livery Details:
G64: 193.950:   Folder: (Aircraft/Boeing767-300ERv1112/liveries/767 Lufthansa - D-ABUC/)
G64: 193.950:     Name: (767 Lufthansa - D-ABUC)
XL: 0 : JARDesign plugin: D:\Program Files (x86)\X-Plane 10\Resources\plugins\X-Life\News/news.txt file updated.
XL: 0 : MessageGreen: X-Life Traffic by JARDesign Ver.1.1r1 290516
SkyMaxx Pro: Activating METAR parsing.
SkyMaxx Pro: Found new METAR.rwx file
SkyMaxx Pro: Parsing METAR data
SkyMaxx Pro: METAR parsing took 217 ms.
SkyMaxx Pro: Location set to lat 47.475147 lon 8.536285 alt 426.121750
[TGDS] Enabling version 1.2.4+f1ff22d...
[TGDS] Configuring shaders... 
[TGDS] Configuring finished 
[TGDS] Loading fonts: 
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/TGDS/TGDSResources/ArialNarrowBold.ttf, tex width 1024, tex height 64, texture data 00000002C4F38F00
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/TGDS/TGDSResources/ArialNarrowBold.ttf, tex width 1024, tex height 128, texture data 00000002C4EB7020
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112/plugins/TGDS/TGDSResources/ArialNarrowBold.ttf, tex width 1024, tex height 256, texture data 00000002C4F38F00
[TGDS] Loading fonts finished 
[FF Plugin Manager] TGDS enabled
[FF Effects] Enabling version 1.1.1+a597570...
[FF Plugin Manager] FF Effects enabled
[FF Plugin Manager] SASL enabled
[757767] Enable ... 
[757767] Creating settings object ... 
[757767] Creating settings object - done.
[757767] Creating objects ... 
[757767] Loaded AIRAC ID: 1601
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/boeingavionics-bold.ttf, tex width 1024, tex height 128, texture data 00000002D25BE010
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/boeingavionics-bold.ttf, tex width 1024, tex height 128, texture data 00000002D2685A20
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/boeingavionics-bold.ttf, tex width 1024, tex height 128, texture data 00000002D2685A20
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/boeingavionics-bold.ttf, tex width 1024, tex height 128, texture data 00000002D2685A20
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/boeingavionics-bold.ttf, tex width 1024, tex height 256, texture data 00000002D25BE010
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/BoeingCDU-Bold.ttf, tex width 1024, tex height 64, texture data 00000002D25CE020
Trying to build mipmaps for font D:\Program Files (x86)/X-Plane 10/Aircraft/Boeing767-300ERv1112//plugins/757767Avionics/Resources/BoeingCDU-Bold.ttf, tex width 1024, tex height 64, texture data 00000002D25CE020
[757767] Creating objects - done.
[757767] Starting the remote CDU server ... 
[757767] The remote CDU server started. 
[757767] Registering callbacks ... 
[757767] Registering callbacks - done.
[757767] Enabled. 
[FF Plugin Manager] ru.stsff.757767avionics enabled
[757767] Start waiting for all plugins are ready at frame: 89
[FF Mouse Handler] Enabling version 1.3.5+8b3116b...
[FF Plugin Manager] FF Mouse Handler enabled
0:03:41.173 E/WXR: Bad MDEG custom real weather report: Longitude 180.128494 not in the range of -180 to 180 degrees!
[REFL] Enable ... 
[REFL] Enabled
[FF Plugin Manager] ru.ffsts.xreflections enabled
[757767] Skip the frame due to correct init order. Frame: 93
[SASL INFO] "panel"    Running on MS Windows
[SASL INFO] "panel"    This product is version: v1.1.12
[SASL INFO] including    definitions/763PWtables.lib.lua
[SASL INFO] including    definitions/763PWparameters.lua
[757767] Init frame started at frame: 95
[757767] Init frame done. 
[757767] Loop started at frame: 97
Clean exit from threads.
0:05:19.297 I/ATC: Airport flow changed at ENTC!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENTC CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENTC. Advancing...
0:05:19.297 I/ATC: Changing ENTC CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENTC. Advancing...
0:05:19.297 I/ATC: Changing ENTC CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at UUEE!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing UUEE CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at UUEE. Advancing...
0:05:19.297 I/ATC: Changing UUEE CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at UUEE. Advancing...
0:05:19.297 I/ATC: Changing UUEE CabState from 2 to 0
0:05:19.297 W/ATC: Could not find an appropriate flow at ENAT...attempting to autogen one on the fly
0:05:19.297 W/ATC: Adding autogen'ed flow AUTOGEN: West to the list for ENAT
0:05:19.297 I/ATC: Airport flow changed at ENAT!
CurFlow: FLOW RWY 11 NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENAT CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENAT. Advancing...
0:05:19.297 I/ATC: Changing ENAT CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENAT. Advancing...
0:05:19.297 I/ATC: Changing ENAT CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENRY!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENRY CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENRY. Advancing...
0:05:19.297 I/ATC: Changing ENRY CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENRY. Advancing...
0:05:19.297 I/ATC: Changing ENRY CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENVA!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENVA CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENVA. Advancing...
0:05:19.297 I/ATC: Changing ENVA CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENVA. Advancing...
0:05:19.297 I/ATC: Changing ENVA CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENGM!
CurFlow: Northern flow NewFlow: Southern flow
0:05:19.297 I/ATC: Changing ENGM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENGM. Advancing...
0:05:19.297 I/ATC: Changing ENGM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENGM. Advancing...
0:05:19.297 I/ATC: Changing ENGM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSA!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSA CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSA. Advancing...
0:05:19.297 I/ATC: Changing EDSA CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSA. Advancing...
0:05:19.297 I/ATC: Changing EDSA CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSW!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSW CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSW. Advancing...
0:05:19.297 I/ATC: Changing EDSW CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSW. Advancing...
0:05:19.297 I/ATC: Changing EDSW CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTU!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTU CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTU. Advancing...
0:05:19.297 I/ATC: Changing EDTU CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTU. Advancing...
0:05:19.297 I/ATC: Changing EDTU CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSI!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSI CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSI. Advancing...
0:05:19.297 I/ATC: Changing EDSI CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSI. Advancing...
0:05:19.297 I/ATC: Changing EDSI CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDMB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDMB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDMB. Advancing...
0:05:19.297 I/ATC: Changing EDMB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDMB. Advancing...
0:05:19.297 I/ATC: Changing EDMB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDMC!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDMC CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDMC. Advancing...
0:05:19.297 I/ATC: Changing EDMC CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDMC. Advancing...
0:05:19.297 I/ATC: Changing EDMC CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSL!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSL CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSL. Advancing...
0:05:19.297 I/ATC: Changing EDSL CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSL. Advancing...
0:05:19.297 I/ATC: Changing EDSL CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTG!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTG CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTG. Advancing...
0:05:19.297 I/ATC: Changing EDTG CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTG. Advancing...
0:05:19.297 I/ATC: Changing EDTG CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTD!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTD CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTD. Advancing...
0:05:19.297 I/ATC: Changing EDTD CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTD. Advancing...
0:05:19.297 I/ATC: Changing EDTD CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTE!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTE CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTE. Advancing...
0:05:19.297 I/ATC: Changing EDTE CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTE. Advancing...
0:05:19.297 I/ATC: Changing EDTE CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTF!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTF CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTF. Advancing...
0:05:19.297 I/ATC: Changing EDTF CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTF. Advancing...
0:05:19.297 I/ATC: Changing EDTF CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSG!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSG CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSG. Advancing...
0:05:19.297 I/ATC: Changing EDSG CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSG. Advancing...
0:05:19.297 I/ATC: Changing EDSG CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDNY!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDNY CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDNY. Advancing...
0:05:19.297 I/ATC: Changing EDNY CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDNY. Advancing...
0:05:19.297 I/ATC: Changing EDNY CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTZ!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTZ CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTZ. Advancing...
0:05:19.297 I/ATC: Changing EDTZ CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTZ. Advancing...
0:05:19.297 I/ATC: Changing EDTZ CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTL!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTL CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTL. Advancing...
0:05:19.297 I/ATC: Changing EDTL CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTL. Advancing...
0:05:19.297 I/ATC: Changing EDTL CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDPJ!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDPJ CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDPJ. Advancing...
0:05:19.297 I/ATC: Changing EDPJ CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDPJ. Advancing...
0:05:19.297 I/ATC: Changing EDPJ CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDNL!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDNL CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDNL. Advancing...
0:05:19.297 I/ATC: Changing EDNL CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDNL. Advancing...
0:05:19.297 I/ATC: Changing EDNL CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTM!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTM. Advancing...
0:05:19.297 I/ATC: Changing EDTM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTM. Advancing...
0:05:19.297 I/ATC: Changing EDTM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSN!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSN CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSN. Advancing...
0:05:19.297 I/ATC: Changing EDSN CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSN. Advancing...
0:05:19.297 I/ATC: Changing EDSN CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTP!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTP CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTP. Advancing...
0:05:19.297 I/ATC: Changing EDTP CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTP. Advancing...
0:05:19.297 I/ATC: Changing EDTP CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTO!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTO CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTO. Advancing...
0:05:19.297 I/ATC: Changing EDTO CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTO. Advancing...
0:05:19.297 I/ATC: Changing EDTO CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSP!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSP CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSP. Advancing...
0:05:19.297 I/ATC: Changing EDSP CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSP. Advancing...
0:05:19.297 I/ATC: Changing EDSP CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSR!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSR CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSR. Advancing...
0:05:19.297 I/ATC: Changing EDSR CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSR. Advancing...
0:05:19.297 I/ATC: Changing EDSR CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTR!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTR CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTR. Advancing...
0:05:19.297 I/ATC: Changing EDTR CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTR. Advancing...
0:05:19.297 I/ATC: Changing EDTR CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDSZ!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDSZ CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDSZ. Advancing...
0:05:19.297 I/ATC: Changing EDSZ CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDSZ. Advancing...
0:05:19.297 I/ATC: Changing EDSZ CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTS!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTS CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTS. Advancing...
0:05:19.297 I/ATC: Changing EDTS CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTS. Advancing...
0:05:19.297 I/ATC: Changing EDTS CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZS!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LSZS CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZS. Advancing...
0:05:19.297 I/ATC: Changing LSZS CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZS. Advancing...
0:05:19.297 I/ATC: Changing LSZS CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZR!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:05:19.297 I/ATC: Changing LSZR CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZR. Advancing...
0:05:19.297 I/ATC: Changing LSZR CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZR. Advancing...
0:05:19.297 I/ATC: Changing LSZR CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDTW!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing EDTW CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDTW. Advancing...
0:05:19.297 I/ATC: Changing EDTW CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDTW. Advancing...
0:05:19.297 I/ATC: Changing EDTW CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDAH!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDAH CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDAH. Advancing...
0:05:19.297 I/ATC: Changing EDAH CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDAH. Advancing...
0:05:19.297 I/ATC: Changing EDAH CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENEV!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENEV CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENEV. Advancing...
0:05:19.297 I/ATC: Changing ENEV CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENEV. Advancing...
0:05:19.297 I/ATC: Changing ENEV CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENHD!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENHD CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENHD. Advancing...
0:05:19.297 I/ATC: Changing ENHD CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENHD. Advancing...
0:05:19.297 I/ATC: Changing ENHD CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDDM!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDDM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDDM. Advancing...
0:05:19.297 I/ATC: Changing EDDM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDDM. Advancing...
0:05:19.297 I/ATC: Changing EDDM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENKR!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENKR CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENKR. Advancing...
0:05:19.297 I/ATC: Changing ENKR CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENKR. Advancing...
0:05:19.297 I/ATC: Changing ENKR CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENTO!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENTO CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENTO. Advancing...
0:05:19.297 I/ATC: Changing ENTO CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENTO. Advancing...
0:05:19.297 I/ATC: Changing ENTO CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENDU!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENDU CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENDU. Advancing...
0:05:19.297 I/ATC: Changing ENDU CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENDU. Advancing...
0:05:19.297 I/ATC: Changing ENDU CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENNM!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENNM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENNM. Advancing...
0:05:19.297 I/ATC: Changing ENNM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENNM. Advancing...
0:05:19.297 I/ATC: Changing ENNM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENNA!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENNA CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENNA. Advancing...
0:05:19.297 I/ATC: Changing ENNA CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENNA. Advancing...
0:05:19.297 I/ATC: Changing ENNA CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENAL!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENAL CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENAL. Advancing...
0:05:19.297 I/ATC: Changing ENAL CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENAL. Advancing...
0:05:19.297 I/ATC: Changing ENAL CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENKB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing ENKB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENKB. Advancing...
0:05:19.297 I/ATC: Changing ENKB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENKB. Advancing...
0:05:19.297 I/ATC: Changing ENKB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENML!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENML CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENML. Advancing...
0:05:19.297 I/ATC: Changing ENML CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENML. Advancing...
0:05:19.297 I/ATC: Changing ENML CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENCN!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing ENCN CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENCN. Advancing...
0:05:19.297 I/ATC: Changing ENCN CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENCN. Advancing...
0:05:19.297 I/ATC: Changing ENCN CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LESB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LESB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LESB. Advancing...
0:05:19.297 I/ATC: Changing LESB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LESB. Advancing...
0:05:19.297 I/ATC: Changing LESB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LTBJ!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LTBJ CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LTBJ. Advancing...
0:05:19.297 I/ATC: Changing LTBJ CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LTBJ. Advancing...
0:05:19.297 I/ATC: Changing LTBJ CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENBR!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENBR CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENBR. Advancing...
0:05:19.297 I/ATC: Changing ENBR CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENBR. Advancing...
0:05:19.297 I/ATC: Changing ENBR CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LIPV!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LIPV CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LIPV. Advancing...
0:05:19.297 I/ATC: Changing LIPV CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LIPV. Advancing...
0:05:19.297 I/ATC: Changing LIPV CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSMA!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:05:19.297 I/ATC: Changing LSMA CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSMA. Advancing...
0:05:19.297 I/ATC: Changing LSMA CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSMA. Advancing...
0:05:19.297 I/ATC: Changing LSMA CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at ENZV!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing ENZV CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at ENZV. Advancing...
0:05:19.297 I/ATC: Changing ENZV CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at ENZV. Advancing...
0:05:19.297 I/ATC: Changing ENZV CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LSZB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZB. Advancing...
0:05:19.297 I/ATC: Changing LSZB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZB. Advancing...
0:05:19.297 I/ATC: Changing LSZB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSME!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:05:19.297 I/ATC: Changing LSME CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSME. Advancing...
0:05:19.297 I/ATC: Changing LSME CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSME. Advancing...
0:05:19.297 I/ATC: Changing LSME CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at EDNE!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing EDNE CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at EDNE. Advancing...
0:05:19.297 I/ATC: Changing EDNE CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at EDNE. Advancing...
0:05:19.297 I/ATC: Changing EDNE CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSGT!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LSGT CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSGT. Advancing...
0:05:19.297 I/ATC: Changing LSGT CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSGT. Advancing...
0:05:19.297 I/ATC: Changing LSGT CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFGB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LFGB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFGB. Advancing...
0:05:19.297 I/ATC: Changing LFGB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFGB. Advancing...
0:05:19.297 I/ATC: Changing LFGB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFGA!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LFGA CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFGA. Advancing...
0:05:19.297 I/ATC: Changing LFGA CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFGA. Advancing...
0:05:19.297 I/ATC: Changing LFGA CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZG!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LSZG CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZG. Advancing...
0:05:19.297 I/ATC: Changing LSZG CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZG. Advancing...
0:05:19.297 I/ATC: Changing LSZG CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSMD!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LSMD CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSMD. Advancing...
0:05:19.297 I/ATC: Changing LSMD CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSMD. Advancing...
0:05:19.297 I/ATC: Changing LSMD CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at XEDDM!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing XEDDM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at XEDDM. Advancing...
0:05:19.297 I/ATC: Changing XEDDM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at XEDDM. Advancing...
0:05:19.297 I/ATC: Changing XEDDM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFST!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LFST CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFST. Advancing...
0:05:19.297 I/ATC: Changing LFST CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFST. Advancing...
0:05:19.297 I/ATC: Changing LFST CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSMF!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LSMF CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSMF. Advancing...
0:05:19.297 I/ATC: Changing LSMF CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSMF. Advancing...
0:05:19.297 I/ATC: Changing LSMF CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSMM!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:05:19.297 I/ATC: Changing LSMM CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSMM. Advancing...
0:05:19.297 I/ATC: Changing LSMM CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSMM. Advancing...
0:05:19.297 I/ATC: Changing LSMM CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFSB!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LFSB CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFSB. Advancing...
0:05:19.297 I/ATC: Changing LFSB CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFSB. Advancing...
0:05:19.297 I/ATC: Changing LFSB CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZW!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: East
0:05:19.297 I/ATC: Changing LSZW CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZW. Advancing...
0:05:19.297 I/ATC: Changing LSZW CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZW. Advancing...
0:05:19.297 I/ATC: Changing LSZW CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSTS!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LSTS CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSTS. Advancing...
0:05:19.297 I/ATC: Changing LSTS CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSTS. Advancing...
0:05:19.297 I/ATC: Changing LSTS CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSPV!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LSPV CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSPV. Advancing...
0:05:19.297 I/ATC: Changing LSPV CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSPV. Advancing...
0:05:19.297 I/ATC: Changing LSPV CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFSC!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LFSC CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFSC. Advancing...
0:05:19.297 I/ATC: Changing LFSC CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFSC. Advancing...
0:05:19.297 I/ATC: Changing LFSC CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LSZH!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: South
0:05:19.297 I/ATC: Changing LSZH CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LSZH. Advancing...
0:05:19.297 I/ATC: Changing LSZH CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LSZH. Advancing...
0:05:19.297 I/ATC: Changing LSZH CabState from 2 to 0
0:05:19.297 I/ATC: Airport flow changed at LFPG!
CurFlow: AUTOGEN: North NewFlow: AUTOGEN: West
0:05:19.297 I/ATC: Changing LFPG CabState from 0 to 1
0:05:19.297 I/ATC: All departures are done at LFPG. Advancing...
0:05:19.297 I/ATC: Changing LFPG CabState from 1 to 2
0:05:19.297 I/ATC: All arrivals are done at LFPG. Advancing...
0:05:19.297 I/ATC: Changing LFPG CabState from 2 to 0
FlyWithLua Info: Load exit file.
FlyWithLua Info: Load exit file.
FlyWithLua Info: FlyWithLua plugin disabled.
G64: 419.475: Plugin Disable..
G64: 419.475: GizmoCore::Stop()..
G64: 419.515: UnRegister Callbacks..
G64: 419.515: Destroying Mouse Trap..
G64: 419.515: UnRegister key sniffer..
G64: 419.515: Killing curl..
G64: 419.515: Killing mapping..
G64: 419.587: Killing particles..
G64: 419.588: Thread sleep..
G64: 419.788: curl_global_cleanup..
G64: 419.788: Plugin Disabled.
SkyMaxx Pro: SilverLining deleted.
[757767] Disable ...
[757767] Unregistering callbacks ...
[757767] Unregistering callbacks - done.
[757767] Destroying objects ...
[757767] Destroying objects - done.
[757767] Save and destroy settings ...
[757767] Save and destroy settings - done.
[757767] Disabled.
[TGDS] Disabling...
[REFL] Disable... 
[REFL] Disabled
[SASL INFO] "panel"    Allocated for LUA: 40748480 bytes
[SASL INFO] "panel"    Global max used by LUA: 12553211 bytes
[SASL INFO] "panel"    ____________________________________________________
G64: 422.819: XPluginStop() complete.
JARDesign Ground Handling 3D Sound Engine Disable 
SkyMaxx Pro: Exiting XPluginStop() of SilverLining
XL: 0 : 
XL: 0 : ATC LOG ----------------------------------- 
XL: 0 : ATC LOG END ---------------------------- 
XL: 0 : 
XL 3D Sound Engine Disable 
XPrealWX: cleaning up
XPrealWX: disconnect callbacks
XPrealWX: server stop
[757767] Unloading ...
[757767] Unloaded.
0:06:50.712 I/JOY: UNREGISTER Joystick device: T.Flight Hotas X - VID:1103PID:45320
0:06:50.712 D/HID: HID Bridge Shutdown
----- X-Plane has shut down -----
 

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use