ryugahideki_ 0 Posted June 28, 2016 Share Posted June 28, 2016 Hey everybody, I am unfortunately having this dumb problem with my Airbus.I am using P3D v3.2 and no matter what I do , I can't get them opened ( Cargo Doors and Left Aft).Whenever I click them to open, Front Left doors are opened and closed. In Turn Around state those door are opened automatically, but I want them open in cold&dark.Please suggestions are welcomed. Thank you Please login to display this image. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 28, 2016 Share Posted June 28, 2016 For troubleshooting purposes, let's first have you uninstall and reinstall the Airbus using THIS PROCEDURE. Please be sure to follow the entire procedure precisely (don't skip or change anything), and ensure that you are installing Version 1.31 of the Airbus. After that, please test your doors and let us know if there is still a problem. Looking forwarding to hearing back from you! Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 Wilco. I will let you know. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 Sir, I'have done the whole procedure correctly but when I apply ColdandDark those doors can't be opened again. Before I did what you told me to do, in turn around state those doors could be opened but now they can't be opened in turn around state,either. What else do I supposed to do? Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted June 28, 2016 Deputy Sheriffs Share Posted June 28, 2016 Do you have SimConnect manually installed after having installed P3Dv3? If not, you need to install it. You will find the installer here: Prepar3D Program Folder\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 11 minutes ago, Tom A320 said: Do you have SimConnect manually installed after having installed P3Dv3? If not, you need to install it. You will find the installer here: Prepar3D Program Folder\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi Yeah sir I just reinstalled it, bu no changes at all. Link to comment Share on other sites More sharing options...
Deputy Sheriffs Tom A320 4915 Posted June 28, 2016 Deputy Sheriffs Share Posted June 28, 2016 Have you installed the Airbus as Administrator (right click on the setup file, then "run as administrator") ? Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 Just now, Tom A320 said: Have you installed the Airbus as Administrator (right click on the setup file, then "run as administrator") ? yes of course. Does this problem have something to do with load/fuel or fuel manager? In turn around state doors again now can be opened.But why not in cold and dark.. Link to comment Share on other sites More sharing options...
dannyvhm 18 Posted June 28, 2016 Share Posted June 28, 2016 Before you can open the doors you need to enter a loadsheet. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 1 minute ago, dannyvhm said: Before you can open the doors you need to enter a loadsheet. can you please explain it item by item? I have done almost everything (I guess). Link to comment Share on other sites More sharing options...
dannyvhm 18 Posted June 28, 2016 Share Posted June 28, 2016 Create a loadsheet using the fuel planner. Then on the right MCDU click LSK5L "LOAD/FUEL" and after that on LSK6L "INIT>LOADSHEET". Now the Cargo Doors can be opened. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 4 minutes ago, dannyvhm said: Create a loadsheet using the fuel planner. Then on the right MCDU click LSK5L "LOAD/FUEL" and after that on LSK6L "INIT>LOADSHEET". Now the Cargo Doors can be opened. not it's not opening or something.It really drives me mad and also it seems like no one knows a solution Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 No one really doesn't know the solution? Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 28, 2016 Share Posted June 28, 2016 It's a difficult one, as nobody we know (out of a very large customer base) has had this experience. To make matters tougher, every single computer, no mater how similar, is different because each person has different addons (some not related to Flight Simulation at all) and have installed them differently and/or in different order. When you're talking software, the aforementioned makes troubleshooting the type of issue you're reporting very, very, VERY difficult. It's most certainly not our software, but something on your system doing this, and nobody knows your system better than you do. With the above in mind, we'll try to help, but if we run out of ideas then you're only option is to put in a support request (and even then it may come down to you finding this, because it's your system causing it). To start, please answer and do the following: 1. Post complete system specs. 2. List your simulator, version and any service packs you have installed. 3. Post the contents of your FSX.CFG or P3D.CFG 4. Post the contents of your DLL.XML file, and if you're running P3D please post the contents of both (two sets) your DLL.XML and EXE.DLL (again, there will be two sets of these in different locations). 5. Tell us the type of controllers (joystick, throttles, rudder pedals, etc.) and what software and/or drivers you have installed for them. 6. Please post the contents of your control settings (for FSX, this file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Microsoft\FSX\Controls folder, and the file name is "Standard". In P3D, the file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Lockheed Martin\Prepar3D v3\Controls and the file name is also "Standard". Looking forward to hearing back from you. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 28, 2016 Author Share Posted June 28, 2016 50 minutes ago, DaveCT2003 said: It's a difficult one, as nobody we know (out of a very large customer base) has had this experience. To make matters tougher, every single computer, no mater how similar, is different because each person has different addons (some not related to Flight Simulation at all) and have installed them differently and/or in different order. When you're talking software, the aforementioned makes troubleshooting the type of issue you're reporting very, very, VERY difficult. It's most certainly not our software, but something on your system doing this, and nobody knows your system better than you do. With the above in mind, we'll try to help, but if we run out of ideas then you're only option is to put in a support request (and even then it may come down to you finding this, because it's your system causing it). To start, please answer and do the following: 1. Post complete system specs. 2. List your simulator, version and any service packs you have installed. 3. Post the contents of your FSX.CFG or P3D.CFG 4. Post the contents of your DLL.XML file, and if you're running P3D please post the contents of both (two sets) your DLL.XML and EXE.DLL (again, there will be two sets of these in different locations). 5. Tell us the type of controllers (joystick, throttles, rudder pedals, etc.) and what software and/or drivers you have installed for them. 6. Please post the contents of your control settings (for FSX, this file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Microsoft\FSX\Controls folder, and the file name is "Standard". In P3D, the file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Lockheed Martin\Prepar3D v3\Controls and the file name is also "Standard". Looking forward to hearing back from you. 2-I am using Prepar3d V3.2 3. Quote [GRAPHICS] HDR_BRIGHTNESS=1.100000 HDR_BLOOM_THRESHOLD=3.000000 HDR_BLOOM_MAGNITUDE=1.000000 HDR_BLOOM_BLUR_SIGMA=0.800000 TONEMAP_DAY_EXPOSURE_KEY=0.280000 TONEMAP_NIGHT_EXPOSURE_KEY=0.130000 HDR_SATURATION=0.800000 TEXTURE_MAX_LOAD=2048 NUM_LIGHTS=4 COCKPIT_HIGH_LOD=1 AIRCRAFT_REFLECTIONS=1 LANDING_LIGHTS=1 DAWN_DUSK_SMOOTHING=1 LENSFLARE=0 HDR=0 DYNAMIC_REFLECTIONS=0 SHADOW_QUALITY=0 TERRAIN_SHADOW_CAST_DISTANCE=0 CLOUD_SHADOW_CAST_DISTANCE=0 OBJECT_SHADOW_CAST_DISTANCE=0 CONTENT_NO_SHADOW=0 INTERIOR_SHADOWS_CAST=0 EXTERIOR_SHADOWS_CAST=0 SIMOBJECT_SHADOWS_CAST=0 TERRAIN_SHADOWS_CAST=0 VEGETATION_SHADOWS_CAST=0 BUILDING_SHADOWS_CAST=0 CLOUD_SHADOWS_CAST=0 INTERIOR_SHADOWS_RECEIVE=0 EXTERIOR_SHADOWS_RECEIVE=0 SIMOBJECT_SHADOWS_RECEIVE=0 TERRAIN_SHADOWS_RECEIVE=0 VEGETATION_SHADOWS_RECEIVE=0 BUILDING_SHADOWS_RECEIVE=0 SHADOW_NUM_CASCADES_LOW=4 SHADOW_NUM_CASCADES_MID=5 SHADOW_NUM_CASCADES_HIGH=7 SHADOW_NUM_CASCADES_ULTRA=12 GROUND_SHADOW_TEXTURE_SIZE=512 CLOUD_SHADOW_TEXTURE_SIZE=512 SHADOW_LOG_PARTITION_LOW=0.850000 SHADOW_LOG_PARTITION_MID=0.850000 SHADOW_LOG_PARTITION_HIGH=0.850000 SHADOW_LOG_PARTITION_ULTRA=0.850000 EFFECTS_QUALITY=0 EFFECTS_DISTANCE=0 TEXTURE_QUALITY=3 IMAGE_QUALITY=0 See_Self=1 Text_Scroll=1 SHADER_CACHE_VERSION=1 MIPMAP_VC_PANELS=1 TESSELLATION=1 DYNAMIC_REFLECTIONS=0 [DISPLAY] RUNWAY_LIGHTS_SURFACE_SCALAR=2.2 RUNWAY_LIGHTS_VASI_SCALAR=1.5 RUNWAY_LIGHTS_APPROACH_SCALAR=2.2 RUNWAY_LIGHTS_STROBE_SCALAR=1.5 TextureMaxLoad=3 ChangeTime=4.000000 TransitionTime=4.000000 ActiveWindowTitleTextColor=255,255,255 ActiveWindowTitleBackGroundColor=0,28,140,64 NonActiveWindowTitleTextColor=255,255,255 NonActiveWindowTitleBackGroundColor=24,33,87,64 InfoUpperLeftTextColorUser=255,0,0 InfoUpperLeftTextColorNonUser=255,127,0 InfoUpperLeftBackGroundColor=0,0,0,0 InfoUpperRightTextColor=255,0,0 InfoUpperRightBackGroundColor=0,0,0,0 InfoLowerLeftTextColor=255,255,255 InfoLowerLeftBackGroundColor=255,0,0,128 InfoLowerRightTextColor=255,255,255 InfoLowerRightBackGroundColor=255,0,0,128 InfoBrakesEnable=True InfoParkingBrakesEnable=True InfoPauseEnable=True InfoSlewEnable=True InfoStallEnable=True InfoOverspeedEnable=True InfoWeaponSystemEnable=True InfoCountermeasureEnable=True InfoUpperRightTextEnable=True SKINNED_ANIMATIONS=1 TEXTURE_BANDWIDTH_MULT=30 UPPER_FRAMERATE_LIMIT=0 WideViewAspect=True FullScreenBackground=True FullScreenAutoFill=True Fullscreen=False TEXTURE_FILTERING=16 MSAA=8 SSAA=0 VSYNC=0 FXAA=0 TRIPLE_BUFFER=0 [SCENERY] MaxRegionsPurgePerFrame=16 POP_FREE_AUTOGEN=1 AUTOGEN_BATCH_LOD=2 AUTOGEN_TREE_MAX_DRAW_DISTANCE=9500.000000 AUTOGEN_TREE_MIN_DISTANCE_TO_LOD=2500.000000 IMAGE_COMPLEXITY=2 [JOBSCHEDULER] AffinityMask=3 [MAIN] IgnoreInvalidLocale=True FIBER_FRAME_TIME_FRACTION=0.70 User Objects=Airplane, Helicopter, Submersible, ExternalSim, Avatar LabelsSupported=Airplane, Helicopter ShowInfoText=1 HideMenuNormal=0 HideMenuFullscreen=1 Location=0,0,683,728,\\.\DISPLAY1 Maximized=2 LocationFullScreen=0,0,1366,768,\\.\DISPLAY1 [PANELS] IMAGE_QUALITY=1 SAVE_AND_LOAD_PANEL_STATE=0 PANEL_OPACITY=100 QUICKTIPS=1 PANEL_MASKING=1 PANEL_STRETCHING=1 UNITS_OF_MEASURE=0 [WEATHER] WindshieldPrecipitationEffects=1 MinGustTime=10 MaxGustTime=500 MinGustRampSpeed=1 MaxGustRampSpeed=200 MinVarTime=5 MaxVarTime=50 MinVarRampSpeed=10 MaxVarRampSpeed=75 TurbulenceScale=1.000000 WeatherGraphDataInDialog=0 AdjustForMagVarInDialog=1 DynamicWeather=0 DownloadWindsAloft=0 DisableTurbulence=0 CLOUD_DRAW_DISTANCE=3 DETAILED_CLOUDS=1 OPTIMIZE_DENSE_CLOUDS=1 CLOUD_COVERAGE_DENSITY=5 THERMAL_VISUALS=0 VolumetricFog=1 [CONTROLS] Controls_Default=Standard Controls_Current=Standard KBDAIL=64 KBDELEV=64 KBDRUD=64 force_master_gain=10000 force_stick_force_enabled=1 force_stick_shaker_enabled=1 force_gear_bump_enabled=1 force_crash_enabled=1 force_ground_bumps_enabled=1 force_machinegun_enab led=1 [TextInfo.1] Latitude=1,1 Longitude=1,2 Altitude=1,3 Heading=1,4 AirSpeed=1,5 WindDirectionAndSpeed=1,6 [TextInfo.2] FrameRate=1,1 LockedFrameRate=1,2 GForce=1,3 FuelPercentage=1,4 [TextInfo.3] Latitude=1,1 Longitude=1,2 Altitude=1,3 Heading=1,4 AirSpeed=1,5 WindDirectionAndSpeed=1,6 FrameRate=2,1 LockedFrameRate=2,2 GForce=2,3 FuelPercentage=2,4 [SlewTextInfo.1] Latitude=1,1 Longitude=1,2 Altitude=1,3 Heading=1,4 AirSpeed=1,5 [SlewTextInfo.2] FrameRate=1,1 LockedFrameRate=1,2 [SlewTextInfo.3] Latitude=1,1 Longitude=1,2 Altitude=1,3 Heading=1,4 AirSpeed=1,5 FrameRate=2,1 LockedFrameRate=2,2 [Avatar] DefaultAvatar=Civilian Male White Shirt Blue Jeans [DynamicHeadMovement] LonAccelOnHeadLon=-0.020000 LonAccelOnHeadPitch=-0.010000 RollAccelOnHeadLat=0.010000 YawAccelOnHeadLat=-0.100000 RollAccelOnHeadRoll=0.100000 MaxHeadAngle=5.000000 MaxHeadOffset=0.300000 HeadMoveTimeConstant=1.000000 [VirtualCopilot] VirtualCopilotActive=0 [FlightPlanMap] LineWidth=2 [DISPLAY.Device.NVIDIA GeForce 840M.0.0] Mode=1366x768x32 [USERINTERFACE] SHOW_MISSION_CAPTIONS=1 PAUSE_ON_LOST_FOCUS=0 PROMPT_ON_EXIT=1 SHOW_SCENARIO_WINDOW=1 RestoreTimeOnMove=0 Map_Orientation=0 MUTE_ON_LOST_FOCUS=1 [PointOfInterestSystem] CycleSetting=1 [DEBUG] ReportLoadErrors=0 [SOUND] PrimaryPlaybackDevice={DEF00000-9C6D-47ED-AAF1-4DDA8F2B5C03} VoicePlaybackDevice={DEF00002-9C6D-47ED-AAF1-4DDA8F2B5C03} VoiceCaptureDevice={DEF00003-9C6D-47ED-AAF1-4DDA8F2B5C03} SOUND=1 SOUND_QUALITY=2 SOUND_LOD=0 SOUND_FADER1=0.670000 SOUND_FADER2=0.470000 SOUND_FADER3=0.280000 SOUND_FADER4=0.500000 [TrafficManager] AirlineDensity=0 GADensity=0 FreewayDensity=0 ShipsAndFerriesDensity=0 LeisureBoatsDensity=0 IFROnly=0 AIRPORT_SCENERY_DENSITY=0 [AContain] ShowLabels=1 ShowUserLabel=0 ShowLabelManufacturer=1 ShowLabelModel=1 ShowLabelTailNumber=0 ShowLabelDistance=1 ShowLabelAltitude=1 ShowLabelAirline=0 ShowLabelAirlineAndFlightNumber=0 ShowLabelFlightPlan=0 ShowLabelContainerId=0 ShowLabelAirspeed=0 ShowLabelHeading=0 LabelDelay=1000 LabelColor=FFFF0000 [BUFFERPOOLS] UsePools=1 Poolsize=200000000 [TERRAIN] SWAP_WAIT_TIMEOUT=30 LOD_RADIUS=3.500000 TESSELLATION_FACTOR=75 MESH_RESOLUTION=24 TEXTURE_RESOLUTION=28 AUTOGEN_VEGETATION_DENSITY=0 AUTOGEN_BUILDING_DENSITY=3 DETAIL_TEXTURE=1 WATER_REFLECT_CLOUDS=0 WATER_REFLECT_USERAIRCRAFT=0 WATER_REFLECT_SIMOBJECTS=0 WATER_REFLECT_TERRAIN=0 WATER_REFLECT_AUTOGEN_VEGETATION=0 WATER_REFLECT_AUTOGEN_BUILDINGS=0 WATER_REFRACT_CLOUDS=0 WATER_REFRACT_USERAIRCRAFT=0 WATER_REFRACT_SIMOBJECTS=0 WATER_REFRACT_TERRAIN=0 WATER_REFRACT_AUTOGEN_VEGETATION=0 WATER_REFRACT_AUTOGEN_BUILDINGS=0 ENABLE_BATHYMETRY=0 WATER_CLARITY=30 WATER_DETAIL=1 UseGlobalTerrainView=True TERRAIN_MAX_AUTOGEN_TREES_PER_CELL=4500 TERRAIN_MAX_AUTOGEN_BUILDINGS_PER_CELL=3000 [ATC] AutoOpenAirTrafficWindow=1 UsePilotVoice=1 ShowATCText=1 PilotVoice=0 COMM_MSG_AI_ATC_COLOR=0XFF8C00 COMM_MSG_ATC_AI_COLOR=0X00008B COMM_MSG_ATC_USER_COLOR=0X006400 COMM_MSG_USER_ATC_COLOR=0XA52A2A COMM_MSG_ATIS_COLOR=00000000 [INTERNATIONAL] ASLAT=2 ASLON=1 MEASURE=0 [REALISM] PFactor=1.000000 Torque=1.000000 GyroEffect=1.000000 CrashTolerance=1.000000 General=1.000000 UnlimitedFuel=False AllowEngineDamage=True TrueAirspeed=False AutoCoord=False RealMixture=True StressDamage=True GEffect=True ManualLights=True GyroDrift=False CrashWithDyn=True CrashDetection=False OnCrashAction=0 [ATTACHMENTS] WeaponHighlight=False HighlightDuration=1.000000 AutoWeaponSwitching=False UnlimitedWeapons=False UnlimitedCountermeasures=False IgnoreAttachmentWeight=True IgnoreAttachmentForces=True [RECORDER] RecordAITraffic=True RecordAirportVehicles=True RecordLeisureBoats=True [SIM] SYSCLOCK=0 OPTIMIZE_PARTS=1 [STARTUP] DEMO=0 STARTUP_DEMO= LOAD_SCENARIO_TOOLS=1 LoadCorePlugins=1 LoadWindow=1 [FACILITIES] COUNTRY= STATE= CITY= GTL_BUTTON=4096 [MISC] Com_Rate=7 [DISPLAY.Device.NVIDIA GeForce 840M.0.0] Mode=1366x768x32 [MOUSE] EnableGestures=False [MULTIPLAYER] condAccountPassword=0 DLL.XML Quote <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>dll.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>FSUIPC 4</Name> <Disabled>False</Disabled> <Path>Modules\FSUIPC4.dll</Path> </Launch.Addon> <Launch.Addon> <Name>Couatl</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>fsdreamteam\couatl\couatl.exe</Path> </Launch.Addon> <Launch.Addon> <Name>IvAp</Name> <Disabled>False</Disabled> <Path>C:\Program Files (x86)\IVAO\IvAp v2\ivap_fsx_bootstrap.dll</Path> <Commandline></Commandline> </Launch.Addon> <Launch.Addon> <Name>ObjectFlow_P3D</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow_P3D.dll</Path> </Launch.Addon> </SimBase.Document> EXE.XML Quote <?xml version="1.0" encoding="windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>exe.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>IvAp</Name> <Disabled>False</Disabled> <Path>C:\Program Files (x86)\IVAO\IvAp v2\ivap_fsx_bootstrap.dll</Path> <Commandline></Commandline> </Launch.Addon> </SimBase.Document> I am using Logitech Extreme3D Pro and finally CONTOLS Quote <?xml version="1.0" encoding="Windows-1252"?> <SimBase.Document Type="Controls" version="3,2" id="Standard"> <Descr>Controls Mapping File</Descr> <Filename>Standard.xml</Filename> <SimControls.Map> <Name>KEYBOARD_MAIN.Native</Name> <Entry> <Key>F</Key> <Down>DME</Down> </Entry> <Entry> <Key>G</Key> <Down>GEAR_TOGGLE</Down> </Entry> <Entry> <Key>I</Key> <Down>SMOKE_TOGGLE</Down> </Entry> <Entry> <Key>F4</Key> <Down>THROTTLE_FULL</Down> </Entry> <Entry> <Key>SHIFT+H</Key> <Down>PITOT_HEAT_TOGGLE</Down> </Entry> <Entry> <Key>T</Key> <Down>XPNDR</Down> </Entry> <Entry> <Key>Z</Key> <Down>AP_MASTER</Down> </Entry> <Entry> <Key>SHIFT+VK_PERIOD</Key> <Down>ROTOR_CLUTCH_SWITCH_TOGGLE</Down> </Entry> <Entry> <Key>E</Key> <Down>ENGINE</Down> </Entry> <Entry> <Key>SHIFT+U</Key> <Down>TOGGLE_LAUNCH_BAR_SWITCH</Down> </Entry> <Entry> <Key>CTRL+SHIFT+A</Key> <Down>ADF</Down> </Entry> <Entry> <Key>F8</Key> <Down>FLAPS_DOWN</Down> </Entry> <Entry> <Key>CTRL+5</Key> <Down>RADIO_ADF_IDENT_TOGGLE</Down> </Entry> <Entry> <Key>D</Key> <Down>HEADING_GYRO_SET</Down> </Entry> <Entry> <Key>F1</Key> <Down>THROTTLE_CUT</Down> </Entry> <Entry> <Key>H</Key> <Down>ANTI_ICE_TOGGLE</Down> </Entry> <Entry> <Key>F2</Key> <Down>THROTTLE_DECR</Down> </Entry> <Entry> <Key>M</Key> <Down>MAGNETO</Down> </Entry> <Entry> <Key>CTRL+2</Key> <Down>RADIO_VOR2_IDENT_TOGGLE</Down> </Entry> <Entry> <Key>Num_8</Key> <Down>ELEV_DOWN</Down> </Entry> <Entry> <Key>L</Key> <Down>ALL_LIGHTS_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Num_4</Key> <Down>LANDING_LIGHT_LEFT</Down> </Entry> <Entry> <Key>X</Key> <Down>FREQUENCY_SWAP</Down> </Entry> <Entry> <Key>C</Key> <Down>COM_RADIO</Down> </Entry> <Entry> <Key>SHIFT+V</Key> <Down>VOR_OBS</Down> </Entry> <Entry> <Key>B</Key> <Down>BAROMETRIC</Down> </Entry> <Entry> <Key>N</Key> <Down>NAV_RADIO</Down> </Entry> <Entry> <Key>VK_PERIOD</Key> <Down>BRAKES</Down> </Entry> <Entry> <Key>Num_2</Key> <Down>ELEV_UP</Down> </Entry> <Entry> <Key>VK_SLASH</Key> <Down>SPOILERS_TOGGLE</Down> </Entry> <Entry> <Key>F5</Key> <Down>FLAPS_UP</Down> </Entry> <Entry> <Key>SHIFT+E</Key> <Down>TOGGLE_AIRCRAFT_EXIT</Down> </Entry> <Entry> <Key>Num_1</Key> <Down>ELEV_TRIM_UP</Down> </Entry> <Entry> <Key>F3</Key> <Down>THROTTLE_INCR_SMALL</Down> </Entry> <Entry> <Key>Num_6</Key> <Down>AILERONS_RIGHT</Down> </Entry> <Entry> <Key>Num_7</Key> <Down>ELEV_TRIM_DN</Down> </Entry> <Entry> <Key>Num_9</Key> <Down>INCREASE_THROTTLE</Down> </Entry> <Entry> <Key>Num_4</Key> <Down>AILERONS_LEFT</Down> </Entry> <Entry> <Key>Num_5</Key> <Down>CENTER_AILER_RUDDER</Down> </Entry> <Entry> <Key>Num_3</Key> <Down>DECREASE_THROTTLE</Down> </Entry> <Entry> <Key>CTRL+M</Key> <Down>AP_MACH_HOLD</Down> </Entry> <Entry> <Key>CTRL+SHIFT+G</Key> <Down>AUTO_THROTTLE_TO_GA</Down> </Entry> <Entry> <Key>CTRL+VK_PERIOD</Key> <Down>PARKING_BRAKES</Down> </Entry> <Entry> <Key>SHIFT+P</Key> <Down>TOGGLE_PUSHBACK</Down> </Entry> <Entry> <Key>Num_0</Key> <Down>RUDDER_LEFT</Down> </Entry> <Entry> <Key>CTRL+V</Key> <Down>AP_WING_LEVELER</Down> </Entry> <Entry> <Key>F24</Key> <Down>RUDDER_RIGHT</Down> </Entry> <Entry> <Key>VK_MULTIPLY</Key> <Down>BRAKES_LEFT</Down> </Entry> <Entry> <Key>VK_SUBTRACT</Key> <Down>BRAKES_RIGHT</Down> </Entry> <Entry> <Key>CTRL+T</Key> <Down>AP_ATT_HOLD</Down> </Entry> <Entry> <Key>SHIFT+C</Key> <Down>NITROUS_TANK_VALVE_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+O</Key> <Down>AP_LOC_HOLD</Down> </Entry> <Entry> <Key>CTRL+A</Key> <Down>AP_APR_HOLD</Down> </Entry> <Entry> <Key>CTRL+H</Key> <Down>AP_HDG_HOLD</Down> </Entry> <Entry> <Key>CTRL+Z</Key> <Down>AP_ALT_HOLD</Down> </Entry> <Entry> <Key>CTRL+B</Key> <Down>AP_BC_HOLD</Down> </Entry> <Entry> <Key>CTRL+N</Key> <Down>AP_NAV1_HOLD</Down> </Entry> <Entry> <Key>SHIFT+L</Key> <Down>PANEL_LIGHTS_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+L</Key> <Down>LANDING_LIGHTS_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+Num_0</Key> <Down>RUDDER_TRIM_LEFT</Down> </Entry> <Entry> <Key>F7</Key> <Down>FLAPS_INCR</Down> </Entry> <Entry> <Key>F6</Key> <Down>FLAPS_DECR</Down> </Entry> <Entry> <Key>CTRL+F24</Key> <Down>RUDDER_TRIM_RIGHT</Down> </Entry> <Entry> <Key>CTRL+F4</Key> <Down>PROP_PITCH_LO</Down> </Entry> <Entry> <Key>CTRL+F3</Key> <Down>PROP_PITCH_INCR_SMALL</Down> </Entry> <Entry> <Key>CTRL+F2</Key> <Down>PROP_PITCH_DECR</Down> </Entry> <Entry> <Key>CTRL+F1</Key> <Down>PROP_PITCH_HI</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F4</Key> <Down>MIXTURE_RICH</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F3</Key> <Down>MIXTURE_INCR_SMALL</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F2</Key> <Down>MIXTURE_DECR</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F1</Key> <Down>MIXTURE_LEAN</Down> </Entry> <Entry> <Key>CTRL+D</Key> <Down>YAW_DAMPER_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+R</Key> <Down>AP_AIRSPEED_HOLD</Down> </Entry> <Entry> <Key>SHIFT+R</Key> <Down>AUTO_THROTTLE_ARM</Down> </Entry> <Entry> <Key>CTRL+1</Key> <Down>RADIO_VOR1_IDENT_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+4</Key> <Down>RADIO_DME1_IDENT_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+F4</Key> <Down>TOGGLE_AFTERBURNER</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Num_6</Key> <Down>LANDING_LIGHT_RIGHT</Down> </Entry> <Entry> <Key>CTRL+G</Key> <Down>GEAR_PUMP</Down> </Entry> <Entry> <Key>SHIFT+VK_SLASH</Key> <Down>SPOILERS_ARM_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Num_8</Key> <Down>LANDING_LIGHT_UP</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Num_2</Key> <Down>LANDING_LIGHT_DOWN</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Num_5</Key> <Down>LANDING_LIGHT_HOME</Down> </Entry> <Entry> <Key>SHIFT+D</Key> <Down>RELEASE_DROPPABLE_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F9</Key> <Down>BUOYANCY_CENTER</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F5</Key> <Down>BUOYANCY_MIN</Down> </Entry> <Entry> <Key>CTRL+F</Key> <Down>TOGGLE_FLIGHT_DIRECTOR</Down> </Entry> <Entry> <Key>CTRL+E</Key> <Down>ENGINE_AUTO_START</Down> </Entry> <Entry> <Key>CTRL+SHIFT+V</Key> <Down>INC_COWL_FLAPS</Down> </Entry> <Entry> <Key>CTRL+SHIFT+C</Key> <Down>DEC_COWL_FLAPS</Down> </Entry> <Entry> <Key>CTRL+Num_4</Key> <Down>AILERON_TRIM_LEFT</Down> </Entry> <Entry> <Key>CTRL+Num_6</Key> <Down>AILERON_TRIM_RIGHT</Down> </Entry> <Entry> <Key>J</Key> <Down>HOIST_SWITCH_EXTEND</Down> </Entry> <Entry> <Key>SHIFT+M</Key> <Down>TOGGLE_MASTER_BATTERY_ALTERNATOR</Down> </Entry> <Entry> <Key>SHIFT+B</Key> <Down>ROTOR_BRAKE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+U</Key> <Down>AUTORUDDER_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+Q</Key> <Down>TOGGLE_TAIL_HOOK_HANDLE</Down> </Entry> <Entry> <Key>CTRL+3</Key> <Down>MARKER_SOUND_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+W</Key> <Down>TOGGLE_WATER_RUDDER</Down> </Entry> <Entry> <Key>CTRL+SHIFT+H</Key> <Down>HEADING_BUG_SELECT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Z</Key> <Down>ALTITUDE_BUG_SELECT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+R</Key> <Down>AIRSPEED_BUG_SELECT</Down> </Entry> <Entry> <Key>SHIFT+VK_COMMA</Key> <Down>ROTOR_GOV_SWITCH_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+G</Key> <Down>TOGGLE_TAILWHEEL_LOCK</Down> </Entry> <Entry> <Key>SHIFT+X</Key> <Down>ANTIDETONATION_TANK_VALVE_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+D</Key> <Down>FUEL_DUMP_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+Y</Key> <Down>TOW_PLANE_RELEASE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Y</Key> <Down>TOW_PLANE_REQUEST</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F6</Key> <Down>BUOYANCY_DEC</Down> </Entry> <Entry> <Key>O</Key> <Down>SLING_PICKUP_RELEASE</Down> </Entry> <Entry> <Key>K</Key> <Down>HOIST_SWITCH_RETRACT</Down> </Entry> <Entry> <Key>CTRL+U</Key> <Down>HOIST_DEPLOY_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+I</Key> <Down>TAKEOFF_ASSIST_ARM_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+Space</Key> <Down>TAKEOFF_ASSIST_FIRE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F7</Key> <Down>BUOYANCY_INC</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F8</Key> <Down>BUOYANCY_MAX</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>KEYBOARD_MAIN.Civilian Male White Shirt Blue Jeans</Name> <Entry> <Key>W</Key> <Down>Avatar - Move Forward (down)</Down> <Up>Avatar - Move Forward (up)</Up> </Entry> <Entry> <Key>D</Key> <Down>Avatar - Move Right (down)</Down> <Up>Avatar - Move Right (up)</Up> </Entry> <Entry> <Key>Q</Key> <Down>Avatar - Turn/Pan Left (down)</Down> <Up>Avatar - Turn/Pan Left (up)</Up> </Entry> <Entry> <Key>E</Key> <Down>Avatar - Turn/Pan Right (down)</Down> <Up>Avatar - Turn/Pan Right (up)</Up> </Entry> <Entry> <Key>R</Key> <Down>Avatar - Toggle Run</Down> </Entry> <Entry> <Key>F</Key> <Down>Avatar - Jump</Down> </Entry> <Entry> <Key>C</Key> <Down>Avatar - Toggle Crouch</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>KEYBOARD_MAIN</Name> <Entry> <Key>U</Key> <Down>POINT_OF_INTEREST_TOGGLE_POINTER</Down> </Entry> <Entry> <Key>1</Key> <Down>SELECT_1</Down> </Entry> <Entry> <Key>2</Key> <Down>SELECT_2</Down> </Entry> <Entry> <Key>R</Key> <Down>SIM_RATE</Down> </Entry> <Entry> <Key>CTRL+VK_SLASH</Key> <Down>INVOKE_HELP</Down> </Entry> <Entry> <Key>CTRL+SHIFT+VK_SLASH</Key> <Down>INVOKE_HELP</Down> </Entry> <Entry> <Key>SHIFT+Num_1</Key> <Down>VIEW_REAR_LEFT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_2+Num_4</Key> <Down>VIEW_REAR_LEFT</Down> <Up>VIEW_REAR_LEFT</Up> </Entry> <Entry> <Key>VK_SCROLL</Key> <Down>ATC</Down> </Entry> <Entry> <Key>VK_TILDE</Key> <Down>ATC</Down> </Entry> <Entry> <Key>CTRL+Y</Key> <Down>MOUSE_AS_YOKE_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+A</Key> <Down>PREV_SUB_VIEW</Down> </Entry> <Entry> <Key>F11</Key> <Down>VIEW_CAMERA_SELECT_3</Down> </Entry> <Entry> <Key>3</Key> <Down>SELECT_3</Down> </Entry> <Entry> <Key>4</Key> <Down>SELECT_4</Down> </Entry> <Entry> <Key>VK_MINUS</Key> <Down>MINUS</Down> </Entry> <Entry> <Key>VK_PLUS</Key> <Down>PLUS</Down> </Entry> <Entry> <Key>VK_QUOTE</Key> <Down>VIEW_WINDOW_TO_FRONT</Down> </Entry> <Entry> <Key>Backspace</Key> <Down>ZOOM_1X</Down> </Entry> <Entry> <Key>CTRL+K</Key> <Down>JOYSTICK_CALIBRATE</Down> </Entry> <Entry> <Key>Q</Key> <Down>SOUND_TOGGLE</Down> </Entry> <Entry> <Key>Y</Key> <Down>SLEW_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+Num_9</Key> <Down>VIEW_FORWARD_RIGHT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_6+Num_8</Key> <Down>VIEW_FORWARD_RIGHT</Down> <Up>VIEW_FORWARD_RIGHT</Up> </Entry> <Entry> <Key>VK_PAUSE</Key> <Down>PAUSE_TOGGLE</Down> </Entry> <Entry> <Key>P</Key> <Down>PAUSE_TOGGLE</Down> </Entry> <Entry> <Key>S</Key> <Down>VIEW_MODE</Down> </Entry> <Entry> <Key>VK_SEMICOLON</Key> <Down>SITUATION_SAVE</Down> </Entry> <Entry> <Key>SHIFT+Num_2</Key> <Down>VIEW_REAR</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>CTRL+VK_SEMICOLON</Key> <Down>SITUATION_RESET</Down> </Entry> <Entry> <Key>VK_DIVIDE</Key> <Down>VIEW</Down> </Entry> <Entry> <Key>CTRL+VK_MINUS</Key> <Down>VIEW_CHASE_DISTANCE_SUB</Down> </Entry> <Entry> <Key>SHIFT+S</Key> <Down>VIEW_MODE_REV</Down> </Entry> <Entry> <Key>SHIFT+Num_Del</Key> <Down>PAN_RESET</Down> </Entry> <Entry> <Key>CTRL+Q</Key> <Down>VIEW_ALWAYS_PAN_DOWN</Down> </Entry> <Entry> <Key>SHIFT+Num_8</Key> <Down>VIEW_FORWARD</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>CTRL+VK_PLUS</Key> <Down>VIEW_CHASE_DISTANCE_ADD</Down> </Entry> <Entry> <Key>SHIFT+Num_6</Key> <Down>VIEW_RIGHT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_7</Key> <Down>VIEW_FORWARD_LEFT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_4+Num_8</Key> <Down>VIEW_FORWARD_LEFT</Down> <Up>VIEW_FORWARD_LEFT</Up> </Entry> <Entry> <Key>SHIFT+Num_3</Key> <Down>VIEW_REAR_RIGHT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_2+Num_6</Key> <Down>VIEW_REAR_RIGHT</Down> <Up>VIEW_REAR_RIGHT</Up> </Entry> <Entry> <Key>SHIFT+Num_4</Key> <Down>VIEW_LEFT</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_5</Key> <Down>VIEW_DOWN</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>CTRL+SHIFT+6</Key> <Down>FCS_PREVIOUS_TARGET</Down> </Entry> <Entry> <Key>CTRL+C</Key> <Down>EXIT</Down> </Entry> <Entry> <Key>CTRL+Scroll_Lock</Key> <Down>ABORT</Down> </Entry> <Entry> <Key>SHIFT+Z</Key> <Down>READOUTS_FLIGHT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+B</Key> <Down>WEAPON_STATION_NEXT</Down> </Entry> <Entry> <Key>Enter</Key> <Down>MP_ACTIVATE_CHAT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Space</Key> <Down>WEAPON_SYSTEM_FIRE_DOWN</Down> <Up>WEAPON_SYSTEM_FIRE_UP</Up> </Entry> <Entry> <Key>SHIFT+VK_MINUS</Key> <Down>MINUS_SHIFT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Q</Key> <Down>VIEW_ALWAYS_PAN_UP</Down> </Entry> <Entry> <Key>SHIFT+VK_PLUS</Key> <Down>PLUS_SHIFT</Down> </Entry> <Entry> <Key>CTRL+VK_LBRACKET</Key> <Down>SCRIPT_EVENT_1</Down> </Entry> <Entry> <Key>CTRL+VK_RBRACKET</Key> <Down>SCRIPT_EVENT_2</Down> </Entry> <Entry> <Key>SHIFT+Num_4+Num_5</Key> <Down>VIEW_LEFT_UP</Down> <Up>VIEW_LEFT_UP</Up> </Entry> <Entry> <Key>CTRL+Enter</Key> <Down>EYEPOINT_BACK</Down> </Entry> <Entry> <Key>CTRL+SHIFT+9</Key> <Down>CENTER_NT361_CHECK</Down> </Entry> <Entry> <Key>VK_RBRACKET</Key> <Down>CLOSE_VIEW</Down> </Entry> <Entry> <Key>VK_LBRACKET</Key> <Down>NEW_VIEW</Down> </Entry> <Entry> <Key>SHIFT+VK_RBRACKET</Key> <Down>NEW_MAP</Down> </Entry> <Entry> <Key>CTRL+X</Key> <Down>VIRTUAL_COPILOT_ACTION</Down> </Entry> <Entry> <Key>CTRL+Tab</Key> <Down>NEXT_VIEW</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Tab</Key> <Down>PREV_VIEW</Down> </Entry> <Entry> <Key>SHIFT+3</Key> <Down>PANEL_3</Down> </Entry> <Entry> <Key>SHIFT+F10</Key> <Down>KNEEBOARD_VIEW</Down> </Entry> <Entry> <Key>SHIFT+T</Key> <Down>MP_TRANSFER_CONTROL</Down> </Entry> <Entry> <Key>CTRL+SHIFT+O</Key> <Down>MP_PLAYER_CYCLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+F</Key> <Down>MP_PLAYER_FOLLOW</Down> </Entry> <Entry> <Key>CTRL+SHIFT+VK_RBRACKET</Key> <Down>MP_CHAT</Down> </Entry> <Entry> <Key>Caps_Lock</Key> <Down>MP_VOICE_CAPTURE_START</Down> <Up>MP_VOICE_CAPTURE_STOP</Up> </Entry> <Entry> <Key>SHIFT+Caps_Lock</Key> <Down>MP_BROADCAST_VOICE_CAPTURE_START</Down> <Up>MP_BROADCAST_VOICE_CAPTURE_STOP</Up> </Entry> <Entry> <Key>CTRL+SHIFT+4</Key> <Down>COUNTERMEASURE_SYSTEM_STATION_NEXT</Down> </Entry> <Entry> <Key>CTRL+P</Key> <Down>MP_PAUSE_SESSION</Down> </Entry> <Entry> <Key>SHIFT+1</Key> <Down>PANEL_1</Down> </Entry> <Entry> <Key>SHIFT+2</Key> <Down>PANEL_2</Down> </Entry> <Entry> <Key>SHIFT+4</Key> <Down>PANEL_4</Down> </Entry> <Entry> <Key>SHIFT+5</Key> <Down>PANEL_5</Down> </Entry> <Entry> <Key>SHIFT+6</Key> <Down>PANEL_6</Down> </Entry> <Entry> <Key>SHIFT+7</Key> <Down>PANEL_7</Down> </Entry> <Entry> <Key>SHIFT+8</Key> <Down>PANEL_8</Down> </Entry> <Entry> <Key>SHIFT+9</Key> <Down>PANEL_9</Down> </Entry> <Entry> <Key>SHIFT+Num_6+Num_5</Key> <Down>VIEW_RIGHT_UP</Down> <Up>VIEW_RIGHT_UP</Up> </Entry> <Entry> <Key>A</Key> <Down>NEXT_SUB_VIEW</Down> </Entry> <Entry> <Key>W</Key> <Down>PANEL_HUD_NEXT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+T</Key> <Down>VIEW_PANEL_ALPHA_SELECT</Down> </Entry> <Entry> <Key>CTRL+Num_1</Key> <Down>VIEW_REAR_LEFT_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_1+Num_5</Key> <Down>VIEW_REAR_LEFT_UP</Down> <Up>VIEW_REAR_LEFT_UP</Up> </Entry> <Entry> <Key>CTRL+SHIFT+S</Key> <Down>WEAPON_SYSTEM_SAFETY_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+Num_8</Key> <Down>VIEW_FORWARD_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_8+Num_5</Key> <Down>VIEW_FORWARD_UP</Down> <Up>VIEW_FORWARD_UP</Up> </Entry> <Entry> <Key>F12</Key> <Down>VIEW_CAMERA_SELECT_4</Down> </Entry> <Entry> <Key>CTRL+SHIFT+J</Key> <Down>WEAPON_SYSTEM_JETTISON</Down> </Entry> <Entry> <Key>CTRL+SHIFT+X</Key> <Down>VIRTUAL_COPILOT_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+Num_9</Key> <Down>VIEW_FORWARD_RIGHT_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_9+Num_5</Key> <Down>VIEW_FORWARD_RIGHT_UP</Down> <Up>VIEW_FORWARD_RIGHT_UP</Up> </Entry> <Entry> <Key>CTRL+Num_3</Key> <Down>VIEW_REAR_RIGHT_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_3+Num_5</Key> <Down>VIEW_REAR_RIGHT_UP</Down> <Up>VIEW_REAR_RIGHT_UP</Up> </Entry> <Entry> <Key>CTRL+Num_2</Key> <Down>VIEW_REAR_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_2+Num_5</Key> <Down>VIEW_REAR_UP</Down> <Up>VIEW_REAR_UP</Up> </Entry> <Entry> <Key>CTRL+Num_7</Key> <Down>VIEW_FORWARD_LEFT_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>SHIFT+Num_7+Num_5</Key> <Down>VIEW_FORWARD_LEFT_UP</Down> <Up>VIEW_FORWARD_LEFT_UP</Up> </Entry> <Entry> <Key>CTRL+Num_5</Key> <Down>VIEW_UP</Down> <Up>VIEW_RESET</Up> </Entry> <Entry> <Key>CTRL+S</Key> <Down>VIEW_PREVIOUS_TOGGLE</Down> </Entry> <Entry> <Key>SHIFT+F</Key> <Down>REQUEST_FUEL_KEY</Down> </Entry> <Entry> <Key>F9</Key> <Down>VIEW_CAMERA_SELECT_1</Down> </Entry> <Entry> <Key>F10</Key> <Down>VIEW_CAMERA_SELECT_2</Down> </Entry> <Entry> <Key>SHIFT+Num_0</Key> <Down>SNAP_TO_PANEL</Down> </Entry> <Entry> <Key>CTRL+SHIFT+P</Key> <Down>POSITION_FREEZE_USER</Down> </Entry> <Entry> <Key>CTRL+SHIFT+L</Key> <Down>TOGGLE_AIRCRAFT_LABELS</Down> </Entry> <Entry> <Key>Esc</Key> <Down>USER_INTERRUPT</Down> </Entry> <Entry> <Key>SHIFT+W</Key> <Down>PANEL_HUD_PREVIOUS</Down> </Entry> <Entry> <Key>CTRL+VK_TILDE</Key> <Down>SIMUI_WINDOW_HIDESHOW</Down> </Entry> <Entry> <Key>SHIFT+Enter</Key> <Down>EYEPOINT_UP</Down> </Entry> <Entry> <Key>SHIFT+Backspace</Key> <Down>EYEPOINT_DOWN</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Enter</Key> <Down>EYEPOINT_RIGHT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Backspace</Key> <Down>EYEPOINT_LEFT</Down> </Entry> <Entry> <Key>CTRL+Backspace</Key> <Down>EYEPOINT_FORWARD</Down> </Entry> <Entry> <Key>CTRL+Space</Key> <Down>EYEPOINT_RESET</Down> </Entry> <Entry> <Key>SHIFT+K</Key> <Down>POINT_OF_INTEREST_CYCLE_PREVIOUS</Down> </Entry> <Entry> <Key>V</Key> <Down>CAPTURE_SCREENSHOT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+1</Key> <Down>COUNTERMEASURE_SYSTEM_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+J</Key> <Down>TOGGLE_JETWAY</Down> </Entry> <Entry> <Key>CTRL+SHIFT+K</Key> <Down>GUN_SYSTEM_FIRE_DOWN</Down> <Up>GUN_SYSTEM_FIRE_UP</Up> </Entry> <Entry> <Key>Space</Key> <Down>MOUSE_LOOK_TOGGLE</Down> <DownVal>1</DownVal> <Up>MOUSE_LOOK_TOGGLE</Up> <UpVal>2</UpVal> </Entry> <Entry> <Key>SHIFT+O</Key> <Down>MOUSE_LOOK_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+I</Key> <Down>YAXIS_INVERT_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+E</Key> <Down>AVATAR MODE ATTACH TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+W</Key> <Down>WEAPON_SYSTEM_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+N</Key> <Down>WEAPON_NEXT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+VK_PERIOD</Key> <Down>WEAPON_RESET</Down> </Entry> <Entry> <Key>CTRL+SHIFT+7</Key> <Down>FCS_POPULATE_WITH_CLOSEST_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+SHIFT+8</Key> <Down>FCS_NEXT_TARGET</Down> </Entry> <Entry> <Key>CTRL+SHIFT+3</Key> <Down>COUNTERMEASURE_SYSTEM_STATION_PREV</Down> </Entry> <Entry> <Key>CTRL+SHIFT+2</Key> <Down>COUNTERMEASURE_SYSTEM_ARMED_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+5</Key> <Down>COUNTERMEASURE_SYSTEM_FIRE_DOWN</Down> <Up>COUNTERMEASURE_SYSTEM_FIRE_UP</Up> </Entry> <Entry> <Key>CTRL+SHIFT+VK_SEMICOLON</Key> <Down>POSITION_FREEZE_ALL</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>KEYBOARD_SLEW</Name> <Entry> <Key>F8</Key> <Down>SLEW_PITCH_DN_FAST</Down> </Entry> <Entry> <Key>F2</Key> <Down>SLEW_ALTIT_FREEZE</Down> </Entry> <Entry> <Key>SHIFT+X</Key> <Down>MOUSE_AS_YOKE_TOGGLE</Down> </Entry> <Entry> <Key>Z</Key> <Down>SLEW_ALTIT_MINUS</Down> </Entry> <Entry> <Key>Y</Key> <Down>SLEW_TOGGLE</Down> </Entry> <Entry> <Key>P</Key> <Down>PAUSE_TOGGLE</Down> </Entry> <Entry> <Key>0</Key> <Down>SLEW_PITCH_MINUS</Down> </Entry> <Entry> <Key>F4</Key> <Down>SLEW_ALTIT_UP_FAST</Down> </Entry> <Entry> <Key>F3</Key> <Down>SLEW_ALTIT_UP_SLOW</Down> </Entry> <Entry> <Key>F1</Key> <Down>SLEW_ALTIT_DN_FAST</Down> </Entry> <Entry> <Key>Q</Key> <Down>SLEW_ALTIT_PLUS</Down> </Entry> <Entry> <Key>F7</Key> <Down>SLEW_PITCH_DN_SLOW</Down> </Entry> <Entry> <Key>F6</Key> <Down>SLEW_PITCH_FREEZE</Down> </Entry> <Entry> <Key>F5</Key> <Down>SLEW_PITCH_UP_FAST</Down> </Entry> <Entry> <Key>9</Key> <Down>SLEW_PITCH_PLUS</Down> </Entry> <Entry> <Key>CTRL+Space</Key> <Down>SLEW_RESET</Down> </Entry> <Entry> <Key>SHIFT+Z</Key> <Down>READOUTS_SLEW</Down> </Entry> <Entry> <Key>Num_7</Key> <Down>SLEW_BANK_MINUS</Down> </Entry> <Entry> <Key>Num_8</Key> <Down>SLEW_AHEAD_PLUS</Down> </Entry> <Entry> <Key>Num_9</Key> <Down>SLEW_BANK_PLUS</Down> </Entry> <Entry> <Key>Num_4</Key> <Down>SLEW_LEFT</Down> </Entry> <Entry> <Key>Num_5</Key> <Down>SLEW_FREEZE</Down> </Entry> <Entry> <Key>Num_6</Key> <Down>SLEW_RIGHT</Down> </Entry> <Entry> <Key>Num_1</Key> <Down>SLEW_HEADING_MINUS</Down> </Entry> <Entry> <Key>Num_2</Key> <Down>SLEW_AHEAD_MINUS</Down> </Entry> <Entry> <Key>Num_3</Key> <Down>SLEW_HEADING_PLUS</Down> </Entry> <Entry> <Key>A</Key> <Down>NEXT_SUB_VIEW</Down> </Entry> <Entry> <Key>CTRL+SHIFT+L</Key> <Down>TOGGLE_AIRCRAFT_LABELS</Down> </Entry> <Entry> <Key>Esc</Key> <Down>USER_INTERRUPT</Down> </Entry> <Entry> <Key>SHIFT+Enter</Key> <Down>EYEPOINT_UP</Down> </Entry> <Entry> <Key>SHIFT+Backspace</Key> <Down>EYEPOINT_DOWN</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Enter</Key> <Down>EYEPOINT_RIGHT</Down> </Entry> <Entry> <Key>CTRL+SHIFT+Backspace</Key> <Down>EYEPOINT_LEFT</Down> </Entry> <Entry> <Key>CTRL+Backspace</Key> <Down>EYEPOINT_FORWARD</Down> </Entry> <Entry> <Key>Space</Key> <Down>MOUSE_LOOK_TOGGLE</Down> <DownVal>1</DownVal> <Up>MOUSE_LOOK_TOGGLE</Up> <UpVal>2</UpVal> </Entry> <Entry> <Key>CTRL+SHIFT+D</Key> <Down>MOUSE_LOOK_TOGGLE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+I</Key> <Down>YAXIS_INVERT_TOGGLE</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>KEYBOARD_OBSERVE</Name> <Entry> <Key>VK_ADD</Key> <Down>OBSERVER_ZOOM_IN</Down> </Entry> <Entry> <Key>Space</Key> <Down>OBSERVER_MOUSE_LOOK_TOGGLE</Down> <DownVal>1</DownVal> <Up>OBSERVER_MOUSE_LOOK_TOGGLE</Up> <UpVal>2</UpVal> </Entry> <Entry> <Key>SHIFT+Num_Del</Key> <Down>OBSERVER_RESET</Down> </Entry> <Entry> <Key>SHIFT+Num_4</Key> <Down>OBSERVER_YAW_LEFT</Down> </Entry> <Entry> <Key>Num_9</Key> <Down>OBSERVER_WORLD_MOVE_UP</Down> </Entry> <Entry> <Key>Num_2</Key> <Down>OBSERVER_WORLD_MOVE_BACK</Down> </Entry> <Entry> <Key>Num_6</Key> <Down>OBSERVER_WORLD_MOVE_RIGHT</Down> </Entry> <Entry> <Key>Num_8</Key> <Down>OBSERVER_WORLD_MOVE_FORWARD</Down> </Entry> <Entry> <Key>Num_3</Key> <Down>OBSERVER_WORLD_MOVE_DOWN</Down> </Entry> <Entry> <Key>VK_SUBTRACT</Key> <Down>OBSERVER_ZOOM_OUT</Down> </Entry> <Entry> <Key>SHIFT+Num_6</Key> <Down>OBSERVER_YAW_RIGHT</Down> </Entry> <Entry> <Key>SHIFT+Num_8</Key> <Down>OBSERVER_PITCH_UP</Down> </Entry> <Entry> <Key>SHIFT+Num_2</Key> <Down>OBSERVER_PITCH_DOWN</Down> </Entry> <Entry> <Key>SHIFT+Num_1</Key> <Down>OBSERVER_ROLL_LEFT</Down> </Entry> <Entry> <Key>SHIFT+Num_3</Key> <Down>OBSERVER_ROLL_RIGHT</Down> </Entry> <Entry> <Key>SHIFT+Num_0</Key> <Down>OBSERVER_ROTATION_TOGGLE</Down> </Entry> <Entry> <Key>Num_4</Key> <Down>OBSERVER_WORLD_MOVE_LEFT</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>KEYBOARD_SIMDIRECTOR</Name> <Entry> <Key>F10</Key> <Down>SIMDIRECTOR_TOGGLE_BACKSTAGE</Down> </Entry> <Entry> <Key>CTRL+E</Key> <Down>SIMDIRECTOR_EXPORT</Down> </Entry> <Entry> <Key>CTRL+T</Key> <Down>SIMDIRECTOR_CENTER_ON_OBJECTS</Down> </Entry> <Entry> <Key>S</Key> <Down>SIMDIRECTOR_GIZMO_NONE</Down> </Entry> <Entry> <Key>F8</Key> <Down>SIMDIRECTOR_MISSION_PREVIEW_MODE</Down> </Entry> <Entry> <Key>F11</Key> <Down>SIMDIRECTOR_OPEN_SCENARIO_PROPERTIES</Down> </Entry> <Entry> <Key>4</Key> <Down>SIMDIRECTOR_CONTROLMODE_DRAW</Down> </Entry> <Entry> <Key>CTRL+Enter</Key> <Down>SIMDIRECTOR_STAGING_COMMIT_ALL_CHANGES</Down> </Entry> <Entry> <Key>1</Key> <Down>SIMDIRECTOR_CONTROLMODE_NONE</Down> </Entry> <Entry> <Key>CTRL+V</Key> <Down>SIMDIRECTOR_DUPLICATE_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+F3</Key> <Down>SIMDIRECTOR_SELECT_PREVIOUS_SELECTED_OBJECT</Down> </Entry> <Entry> <Key>Esc</Key> <Down>SIMDIRECTOR_DESELECT_ALL_OBJECTS</Down> </Entry> <Entry> <Key>5</Key> <Down>SIMDIRECTOR_TOGGLE_STAGING_MODE</Down> </Entry> <Entry> <Key>W</Key> <Down>SIMDIRECTOR_GIZMO_TRANSLATE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+E</Key> <Down>SIMDIRECTOR_EXPORT_GROUP</Down> </Entry> <Entry> <Key>CTRL+O</Key> <Down>SIMDIRECTOR_OPEN_MISSION</Down> </Entry> <Entry> <Key>R</Key> <Down>SIMDIRECTOR_GIZMO_SCALE</Down> </Entry> <Entry> <Key>3</Key> <Down>SIMDIRECTOR_CONTROLMODE_MEASURE</Down> </Entry> <Entry> <Key>CTRL+Z</Key> <Down>SIMDIRECTOR_UNDO</Down> </Entry> <Entry> <Key>CTRL+SHIFT+1</Key> <Down>SIMDIRECTOR_TOGGLE_VISUALIZATION</Down> </Entry> <Entry> <Key>Num_Del</Key> <Down>SIMDIRECTOR_DELETE_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+G</Key> <Down>SIMDIRECTOR_GROUP_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+U</Key> <Down>SIMDIRECTOR_UNGROUP_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+N</Key> <Down>SIMDIRECTOR_NEW_SCENARIO</Down> </Entry> <Entry> <Key>CTRL+SHIFT+S</Key> <Down>SIMDIRECTOR_SAVE_MISSION_AS</Down> </Entry> <Entry> <Key>CTRL+S</Key> <Down>SIMDIRECTOR_SAVE_MISSION</Down> </Entry> <Entry> <Key>CTRL+I</Key> <Down>SIMDIRECTOR_IMPORT</Down> </Entry> <Entry> <Key>E</Key> <Down>SIMDIRECTOR_GIZMO_ROTATE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+3</Key> <Down>SIMDIRECTOR_TOGGLE_OBJECT_PROPERTIES</Down> </Entry> <Entry> <Key>CTRL+SHIFT+4</Key> <Down>SIMDIRECTOR_TOGGLE_CATALOG</Down> </Entry> <Entry> <Key>CTRL+SHIFT+2</Key> <Down>SIMDIRECTOR_TOGGLE_OBJECTS</Down> </Entry> <Entry> <Key>CTRL+SHIFT+6</Key> <Down>SIMDIRECTOR_TOGGLE_VALIDATION</Down> </Entry> <Entry> <Key>CTRL+SHIFT+7</Key> <Down>SIMDIRECTOR_TOGGLE_CATALOG_PREVIEW</Down> </Entry> <Entry> <Key>F6</Key> <Down>SIMDIRECTOR_VIRTUAL_INSTRUCTOR_MODE</Down> </Entry> <Entry> <Key>F7</Key> <Down>SIMDIRECTOR_FLIGHT_INSTRUCTOR_MODE</Down> </Entry> <Entry> <Key>F5</Key> <Down>SIMDIRECTOR_WORLD_EDITOR_MODE</Down> </Entry> <Entry> <Key>CTRL+SHIFT+V</Key> <Down>SIMDIRECTOR_VALIDATE_MISSION</Down> </Entry> <Entry> <Key>CTRL+F4</Key> <Down>SIMDIRECTOR_SELECT_NEXT_SELECTED_OBJECT</Down> </Entry> <Entry> <Key>F1</Key> <Down>SIMDIRECTOR_HELP</Down> </Entry> <Entry> <Key>F12</Key> <Down>SIMDIRECTOR_SETTINGS</Down> </Entry> <Entry> <Key>CTRL+SHIFT+5</Key> <Down>SIMDIRECTOR_TOGGLE_PREPAR3D</Down> </Entry> <Entry> <Key>VK_ADD</Key> <Down>SIMDIRECTOR_ZOOM_IN</Down> </Entry> <Entry> <Key>VK_SUBTRACT</Key> <Down>SIMDIRECTOR_ZOOM_OUT</Down> </Entry> <Entry> <Key>CTRL+Y</Key> <Down>SIMDIRECTOR_REDO</Down> </Entry> <Entry> <Key>2</Key> <Down>SIMDIRECTOR_CONTROLMODE_WAYPOINT</Down> </Entry> <Entry> <Key>F9</Key> <Down>SIMDIRECTOR_OPERATOR_MODE</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Yoke</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_AILERONS_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_ELEVATOR_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>0</Index> <Down>BRAKES</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>2</Index> <Down>SLEW_RESET</Down> </Entry> <Entry> <Index>3</Index> <Down>FLAPS_INCR</Down> </Entry> <Entry> <Index>4</Index> <Down>FLAPS_DECR</Down> </Entry> <Entry> <Index>6</Index> <Down>THROTTLE_INCR</Down> <DownVal>1</DownVal> </Entry> <Entry> <Index>7</Index> <Down>THROTTLE_DECR</Down> <DownVal>1</DownVal> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Yoke SLEW</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>0</Index> <Down>SLEW_RESET</Down> </Entry> <Entry> <Index>2</Index> <Down>SLEW_FREEZE</Down> </Entry> <Entry> <Index>3</Index> <Down>SLEW_ALTIT_MINUS</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>4</Index> <Down>SLEW_ALTIT_PLUS</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>6</Index> <Down>SLEW_PITCH_DN_SLOW</Down> <Up>SLEW_FREEZE</Up> </Entry> <Entry> <Index>7</Index> <Down>SLEW_PITCH_UP_SLOW</Down> <Up>SLEW_FREEZE</Up> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Yoke OBSERVE</Name> <Entry> <Index>6</Index> <Down>OBSERVER_ZOOM_IN</Down> </Entry> <Entry> <Index>7</Index> <Down>OBSERVER_ZOOM_OUT</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Yoke SIMDIRECTOR</Name> </SimControls.Map> <SimControls.Map> <Name>Mouse Look</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_PAN_HEADING</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_PAN_PITCH</AxEvent> <AxScale>-64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>0</Index> <Down>VIEW_RESET</Down> </Entry> <Entry> <Index>2</Index> <Down>EYEPOINT_RESET</Down> </Entry> <Entry> <Index>3</Index> <Down>EYEPOINT_UP</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>4</Index> <Down>EYEPOINT_DOWN</Down> </Entry> <Entry> <Index>6</Index> <Down>ZOOM_OUT</Down> <DownVal>1</DownVal> </Entry> <Entry> <Index>7</Index> <Down>ZOOM_IN</Down> <DownVal>1</DownVal> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Look SLEW</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_PAN_HEADING</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_PAN_PITCH</AxEvent> <AxScale>-64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>0</Index> <Down>SLEW_RESET</Down> </Entry> <Entry> <Index>2</Index> <Down>SLEW_FREEZE</Down> </Entry> <Entry> <Index>3</Index> <Down>SLEW_ALTIT_MINUS</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>4</Index> <Down>SLEW_ALTIT_PLUS</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>6</Index> <Down>SLEW_PITCH_DN_SLOW</Down> <Up>SLEW_FREEZE</Up> </Entry> <Entry> <Index>7</Index> <Down>SLEW_PITCH_UP_SLOW</Down> <Up>SLEW_FREEZE</Up> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Look OBSERVE</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_OBSERVER_YAW</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_OBSERVER_PITCH</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>6</Index> <Down>OBSERVER_ZOOM_IN</Down> </Entry> <Entry> <Index>7</Index> <Down>OBSERVER_ZOOM_OUT</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>Mouse Look SIMDIRECTOR</Name> </SimControls.Map> <SimControls.Map> <Name>Logitech Extreme 3D {C215046D-0204-0000-0000-000000000000}</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_AILERONS_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_ELEVATOR_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>RzAxis</AxName> <Index>5</Index> <AxEvent>AXIS_RUDDER_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>Slider</AxName> <Index>6</Index> <AxEvent>AXIS_THROTTLE_SET</AxEvent> <AxScale>127</AxScale> <AxNull>1</AxNull> </Axis> <Entry> <Index>0</Index> <Down>BRAKES</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>1</Index> <Down>VIEW_MODE</Down> </Entry> <Entry> <Index>2</Index> <Down>ELEV_TRIM_DN</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>3</Index> <Down>ELEV_TRIM_UP</Down> <DownRpt>1</DownRpt> </Entry> <Entry> <Index>4</Index> <Down>FLAPS_INCR</Down> </Entry> <Entry> <Index>5</Index> <Down>FLAPS_DECR</Down> </Entry> <Entry> <Index>6</Index> <Down>RELEASE_DROPPABLE_OBJECTS</Down> </Entry> <Entry> <Index>7</Index> <Down>GEAR_TOGGLE</Down> </Entry> <Entry> <Index>8</Index> <Down>VIEW_MODE</Down> </Entry> <Entry> <Index>9</Index> <Down>GEAR_TOGGLE</Down> </Entry> <POV> <Index>0</Index> <Down>PAN_VIEW</Down> <DownRpt>1</DownRpt> </POV> </SimControls.Map> <SimControls.Map> <Name>Logitech Extreme 3D SLEW {C215046D-0204-0000-0000-000000000000}</Name> <Axis> <AxName>XAxis</AxName> <Index>0</Index> <AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>YAxis</AxName> <Index>1</Index> <AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Axis> <AxName>RzAxis</AxName> <Index>5</Index> <AxEvent>AXIS_SLEW_HEADING_SET</AxEvent> <AxScale>64</AxScale> <AxNull>36</AxNull> </Axis> <Entry> <Index>0</Index> <Down>SLEW_RESET</Down> </Entry> <Entry> <Index>1</Index> <Down>VIEW_MODE</Down> </Entry> <Entry> <Index>2</Index> <Down>SLEW_ALTIT_PLUS</Down> </Entry> <Entry> <Index>3</Index> <Down>SLEW_ALTIT_MINUS</Down> </Entry> <Entry> <Index>4</Index> <Down>SLEW_PITCH_PLUS</Down> </Entry> <Entry> <Index>5</Index> <Down>SLEW_PITCH_MINUS</Down> </Entry> <Entry> <Index>6</Index> <Down>SLEW_BANK_MINUS</Down> </Entry> <Entry> <Index>7</Index> <Down>SLEW_BANK_PLUS</Down> </Entry> <Entry> <Index>8</Index> <Down>SLEW_FREEZE</Down> </Entry> <Entry> <Index>9</Index> <Down>SLEW_RESET</Down> </Entry> </SimControls.Map> <SimControls.Map> <Name>Logitech Extreme 3D OBSERVE {C215046D-0204-0000-0000-000000000000}</Name> </SimControls.Map> <SimControls.Map> <Name>Logitech Extreme 3D SIMDIRECTOR {C215046D-0204-0000-0000-000000000000}</Name> </SimControls.Map> <SimControls.Map> <Name>SETTINGS</Name> <Settings> <ControllersEnabled>True</ControllersEnabled> <Ailerons>64</Ailerons> <Elevator>64</Elevator> <Rudder>64</Rudder> </Settings> </SimControls.Map> </SimBase.Document> Please login to display this image. Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 29, 2016 Share Posted June 29, 2016 Well, it took a while, but I didn't see anything that should be causing the problem in the files you sent (I was hopeful the problem would present itself, as I've seen something similar occur). Now it's time to look at your SimConnect files, which I'm hopeful is the answer. Please go to y our main P3D folder and open the "redist\\Interface" folder. There you will find numerous versions of SimConnect. Please open each sub-folder and install each version of simconnect. This should resolve your issue. Something which can help your avoid such problems In the future is to ensure that User Account Control is disabled and your Antivirus software is disabled for any Flight Simulation software installation (simulator, aircraft, scenery, etc.). I hope this resolves the issue for you. Please let us know. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 29, 2016 Author Share Posted June 29, 2016 7 hours ago, DaveCT2003 said: Well, it took a while, but I didn't see anything that should be causing the problem in the files you sent (I was hopeful the problem would present itself, as I've seen something similar occur). Now it's time to look at your SimConnect files, which I'm hopeful is the answer. Please go to y our main P3D folder and open the "redist\\Interface" folder. There you will find numerous versions of SimConnect. Please open each sub-folder and install each version of simconnect. This should resolve your issue. Something which can help your avoid such problems In the future is to ensure that User Account Control is disabled and your Antivirus software is disabled for any Flight Simulation software installation (simulator, aircraft, scenery, etc.). I hope this resolves the issue for you. Please let us know. I am really really sorry to announce it but it is not working. Isn't it weird that those door can be opened in turnaround state but cannot be opened in cold and dark? Is there any possible cfg or something like that to edit to make those doors opened as default as it is in turn around state? For instance " coldanddark.asc".. Also anyone who sends his personal. asc will be appreciated. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 29, 2016 Author Share Posted June 29, 2016 ı Hope you understood me. anywhere to edit cold and dark situation? Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 29, 2016 Share Posted June 29, 2016 If you have reinstalled the aircraft per the procedure I provided to you, the state has been reinstalled as well. Did you do the reinstall? You did not mention if you reinstalled the different versions of SimConnect. Have you done that? Link to comment Share on other sites More sharing options...
HansW 28 Posted June 29, 2016 Share Posted June 29, 2016 Hi, maybe I had a similar issue with the Aerosoft Airbus A320/A321 installed in Prepar3D v3.2. The thread is here in the German Forum. Post #8 shows the clou to my issue. After updating 'Orbx ObjectFlow_P3D.dll' to the latest rev everything is fine here :). Regards Hans Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 29, 2016 Share Posted June 29, 2016 Thanks Hans. Two other things to check. 1. Do the other states work fine? 2. Once the aircraft loads the Takeoff state, try re-selecting the Takeoff state and see if the doors close. Then see if they reopen. 3. If you're running ORBX scenery, definitely try what Hans said. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 29, 2016 Author Share Posted June 29, 2016 Yeah sir I have done everything you told me to do(reinstalling, simconnects vs). Finally I will handle what Hans and you said when I get home. I will let you know. Thank you Link to comment Share on other sites More sharing options...
DaveCT2003 2553 Posted June 29, 2016 Share Posted June 29, 2016 Thank you my friend, I'm sorry I had to ask but I really thought we'd get somewhere with SimConnect. Something else I thought of. When you are able, would you please open the redist\\Interface" folder and take a screen shot or tell me what's in there for you? I just want to make sure you have all the pertinent versions of SimConnect there. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 29, 2016 Author Share Posted June 29, 2016 1 hour ago, DaveCT2003 said: Thank you my friend, I'm sorry I had to ask but I really thought we'd get somewhere with SimConnect. Something else I thought of. When you are able, would you please open the redist\\Interface" folder and take a screen shot or tell me what's in there for you? I just want to make sure you have all the pertinent versions of SimConnect there. No its okay here are the files. Please login to display this image. here the installed ones Please login to display this image. Link to comment Share on other sites More sharing options...
ryugahideki_ 0 Posted June 29, 2016 Author Share Posted June 29, 2016 5 hours ago, HansW said: Hi, maybe I had a similar issue with the Aerosoft Airbus A320/A321 installed in Prepar3D v3.2. The thread is here in the German Forum. Post #8 shows the clou to my issue. After updating 'Orbx ObjectFlow_P3D.dll' to the latest rev everything is fine here :). Regards Hans Hans do you mean updating orbxlibs? if so, I updated it on 28th May 2016. if not , how would I update? or could you simply share your Orbx ObjectFlow_P3D.dll with me ? Thank You Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.