Jump to content

Airbus Cargo Doors and AFT Left


ryugahideki_

Recommended Posts

Hey everybody, 

I am unfortunately having this dumb problem with my Airbus.I am using P3D v3.2 and no matter what I do , I can't get them opened ( Cargo Doors and Left Aft).Whenever I click them to open, Front Left doors are opened and closed. In Turn Around state those door are opened automatically, but I want them open in cold&dark.Please suggestions are welcomed. Thank you

Please login to display this image.

Link to comment
Share on other sites

For troubleshooting purposes, let's first have you uninstall and reinstall the Airbus using THIS PROCEDURE.  Please be sure to follow the entire procedure precisely (don't skip or change anything), and ensure that you are installing Version 1.31 of the Airbus.

 

After that, please test your doors and let us know if there is still a problem.

 

Looking forwarding to hearing back from you!

 

Link to comment
Share on other sites

Sir,

I'have done the whole procedure correctly but when I apply ColdandDark those doors can't be opened again. Before I did what you told me to do, in turn around state those doors could be opened but now they can't be opened in turn around state,either. What else do I supposed to do?

Link to comment
Share on other sites

  • Deputy Sheriffs

Do you have SimConnect manually installed after having installed P3Dv3? If not, you need to install it. You will find the installer here:

  • Prepar3D Program Folder\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi

 

Link to comment
Share on other sites

11 minutes ago, Tom A320 said:

Do you have SimConnect manually installed after having installed P3Dv3? If not, you need to install it. You will find the installer here:

  • Prepar3D Program Folder\redist\Interface\FSX-SP2-XPACK\retail\lib\SimConnect.msi

 

 

Yeah sir I just reinstalled it, bu no changes at all.

Link to comment
Share on other sites

  • Deputy Sheriffs

Have you installed the Airbus as Administrator (right click on the setup file, then "run as administrator") ?

Link to comment
Share on other sites

Just now, Tom A320 said:

Have you installed the Airbus as Administrator (right click on the setup file, then "run as administrator") ?

yes of course. Does this problem have something to do with load/fuel or fuel manager?

In turn around state doors again now can be opened.But why not in cold and dark..

Link to comment
Share on other sites

Create a loadsheet using the fuel planner. Then on the right MCDU click LSK5L "LOAD/FUEL" and after that on LSK6L "INIT>LOADSHEET". Now the Cargo Doors can be opened.

Link to comment
Share on other sites

4 minutes ago, dannyvhm said:

Create a loadsheet using the fuel planner. Then on the right MCDU click LSK5L "LOAD/FUEL" and after that on LSK6L "INIT>LOADSHEET". Now the Cargo Doors can be opened.

 not it's not opening or something.It really drives me mad and also it seems like no one knows a solution 

Link to comment
Share on other sites

It's a difficult one, as nobody we know (out of a very large customer base) has had this experience.  To make matters tougher, every single computer, no mater how similar, is different because each person has different addons (some not related to Flight Simulation at all) and have installed them differently and/or in different order.  When you're talking software, the aforementioned makes troubleshooting the type of issue you're reporting very, very, VERY difficult.  It's most certainly not our software, but something on your system doing this, and nobody knows your system better than you do.

 

With the above in mind, we'll try to help, but if we run out of ideas then you're only option is to put in a support request (and even then it may come down to you finding this, because it's your system causing it).

 

To start, please answer and do the following:

 

1. Post complete system specs.

2. List your simulator, version and any service packs you have installed.

3. Post the contents of your FSX.CFG or P3D.CFG

4. Post the contents of your DLL.XML file, and if you're running P3D please post the contents of both (two sets) your DLL.XML and EXE.DLL (again, there will be two sets of these in different locations).

5. Tell us the type of controllers (joystick, throttles, rudder pedals, etc.) and what software and/or drivers you have installed for them.

6. Please post the contents of your control settings (for FSX, this file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Microsoft\FSX\Controls folder, and the file name is "Standard".  In P3D, the file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Lockheed Martin\Prepar3D v3\Controls and the file name is also "Standard".

 

Looking forward to hearing back from you.

 

Link to comment
Share on other sites

50 minutes ago, DaveCT2003 said:

It's a difficult one, as nobody we know (out of a very large customer base) has had this experience.  To make matters tougher, every single computer, no mater how similar, is different because each person has different addons (some not related to Flight Simulation at all) and have installed them differently and/or in different order.  When you're talking software, the aforementioned makes troubleshooting the type of issue you're reporting very, very, VERY difficult.  It's most certainly not our software, but something on your system doing this, and nobody knows your system better than you do.

 

With the above in mind, we'll try to help, but if we run out of ideas then you're only option is to put in a support request (and even then it may come down to you finding this, because it's your system causing it).

 

To start, please answer and do the following:

 

1. Post complete system specs.

2. List your simulator, version and any service packs you have installed.

3. Post the contents of your FSX.CFG or P3D.CFG

4. Post the contents of your DLL.XML file, and if you're running P3D please post the contents of both (two sets) your DLL.XML and EXE.DLL (again, there will be two sets of these in different locations).

5. Tell us the type of controllers (joystick, throttles, rudder pedals, etc.) and what software and/or drivers you have installed for them.

6. Please post the contents of your control settings (for FSX, this file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Microsoft\FSX\Controls folder, and the file name is "Standard".  In P3D, the file is located C:\Users\[YOUR USER NAME]\AppData\Roaming\Lockheed Martin\Prepar3D v3\Controls and the file name is also "Standard".

 

Looking forward to hearing back from you.

 

 

2-I am using Prepar3d V3.2

3.

Quote

[GRAPHICS]
HDR_BRIGHTNESS=1.100000
HDR_BLOOM_THRESHOLD=3.000000
HDR_BLOOM_MAGNITUDE=1.000000
HDR_BLOOM_BLUR_SIGMA=0.800000
TONEMAP_DAY_EXPOSURE_KEY=0.280000
TONEMAP_NIGHT_EXPOSURE_KEY=0.130000
HDR_SATURATION=0.800000
TEXTURE_MAX_LOAD=2048
NUM_LIGHTS=4
COCKPIT_HIGH_LOD=1
AIRCRAFT_REFLECTIONS=1
LANDING_LIGHTS=1
DAWN_DUSK_SMOOTHING=1
LENSFLARE=0
HDR=0
DYNAMIC_REFLECTIONS=0
SHADOW_QUALITY=0
TERRAIN_SHADOW_CAST_DISTANCE=0
CLOUD_SHADOW_CAST_DISTANCE=0
OBJECT_SHADOW_CAST_DISTANCE=0
CONTENT_NO_SHADOW=0
INTERIOR_SHADOWS_CAST=0
EXTERIOR_SHADOWS_CAST=0
SIMOBJECT_SHADOWS_CAST=0
TERRAIN_SHADOWS_CAST=0
VEGETATION_SHADOWS_CAST=0
BUILDING_SHADOWS_CAST=0
CLOUD_SHADOWS_CAST=0
INTERIOR_SHADOWS_RECEIVE=0
EXTERIOR_SHADOWS_RECEIVE=0
SIMOBJECT_SHADOWS_RECEIVE=0
TERRAIN_SHADOWS_RECEIVE=0
VEGETATION_SHADOWS_RECEIVE=0
BUILDING_SHADOWS_RECEIVE=0
SHADOW_NUM_CASCADES_LOW=4
SHADOW_NUM_CASCADES_MID=5
SHADOW_NUM_CASCADES_HIGH=7
SHADOW_NUM_CASCADES_ULTRA=12
GROUND_SHADOW_TEXTURE_SIZE=512
CLOUD_SHADOW_TEXTURE_SIZE=512
SHADOW_LOG_PARTITION_LOW=0.850000
SHADOW_LOG_PARTITION_MID=0.850000
SHADOW_LOG_PARTITION_HIGH=0.850000
SHADOW_LOG_PARTITION_ULTRA=0.850000
EFFECTS_QUALITY=0
EFFECTS_DISTANCE=0
TEXTURE_QUALITY=3
IMAGE_QUALITY=0
See_Self=1
Text_Scroll=1
SHADER_CACHE_VERSION=1
MIPMAP_VC_PANELS=1
TESSELLATION=1
DYNAMIC_REFLECTIONS=0
[DISPLAY]
RUNWAY_LIGHTS_SURFACE_SCALAR=2.2
RUNWAY_LIGHTS_VASI_SCALAR=1.5
RUNWAY_LIGHTS_APPROACH_SCALAR=2.2
RUNWAY_LIGHTS_STROBE_SCALAR=1.5
TextureMaxLoad=3
ChangeTime=4.000000
TransitionTime=4.000000
ActiveWindowTitleTextColor=255,255,255
ActiveWindowTitleBackGroundColor=0,28,140,64
NonActiveWindowTitleTextColor=255,255,255
NonActiveWindowTitleBackGroundColor=24,33,87,64
InfoUpperLeftTextColorUser=255,0,0
InfoUpperLeftTextColorNonUser=255,127,0
InfoUpperLeftBackGroundColor=0,0,0,0
InfoUpperRightTextColor=255,0,0
InfoUpperRightBackGroundColor=0,0,0,0
InfoLowerLeftTextColor=255,255,255
InfoLowerLeftBackGroundColor=255,0,0,128
InfoLowerRightTextColor=255,255,255
InfoLowerRightBackGroundColor=255,0,0,128
InfoBrakesEnable=True
InfoParkingBrakesEnable=True
InfoPauseEnable=True
InfoSlewEnable=True
InfoStallEnable=True
InfoOverspeedEnable=True
InfoWeaponSystemEnable=True
InfoCountermeasureEnable=True
InfoUpperRightTextEnable=True
SKINNED_ANIMATIONS=1
TEXTURE_BANDWIDTH_MULT=30
UPPER_FRAMERATE_LIMIT=0
WideViewAspect=True
FullScreenBackground=True
FullScreenAutoFill=True
Fullscreen=False
TEXTURE_FILTERING=16
MSAA=8
SSAA=0
VSYNC=0
FXAA=0
TRIPLE_BUFFER=0
[SCENERY]
MaxRegionsPurgePerFrame=16
POP_FREE_AUTOGEN=1
AUTOGEN_BATCH_LOD=2
AUTOGEN_TREE_MAX_DRAW_DISTANCE=9500.000000
AUTOGEN_TREE_MIN_DISTANCE_TO_LOD=2500.000000
IMAGE_COMPLEXITY=2
[JOBSCHEDULER]
AffinityMask=3
[MAIN]
IgnoreInvalidLocale=True
FIBER_FRAME_TIME_FRACTION=0.70
User Objects=Airplane, Helicopter, Submersible, ExternalSim, Avatar
LabelsSupported=Airplane, Helicopter
ShowInfoText=1
HideMenuNormal=0
HideMenuFullscreen=1
Location=0,0,683,728,\\.\DISPLAY1
Maximized=2
LocationFullScreen=0,0,1366,768,\\.\DISPLAY1
[PANELS]
IMAGE_QUALITY=1
SAVE_AND_LOAD_PANEL_STATE=0
PANEL_OPACITY=100
QUICKTIPS=1
PANEL_MASKING=1
PANEL_STRETCHING=1
UNITS_OF_MEASURE=0
[WEATHER]
WindshieldPrecipitationEffects=1
MinGustTime=10
MaxGustTime=500
MinGustRampSpeed=1
MaxGustRampSpeed=200
MinVarTime=5
MaxVarTime=50
MinVarRampSpeed=10
MaxVarRampSpeed=75
TurbulenceScale=1.000000
WeatherGraphDataInDialog=0
AdjustForMagVarInDialog=1
DynamicWeather=0
DownloadWindsAloft=0
DisableTurbulence=0
CLOUD_DRAW_DISTANCE=3
DETAILED_CLOUDS=1
OPTIMIZE_DENSE_CLOUDS=1
CLOUD_COVERAGE_DENSITY=5
THERMAL_VISUALS=0
VolumetricFog=1
[CONTROLS]
Controls_Default=Standard
Controls_Current=Standard
KBDAIL=64
KBDELEV=64
KBDRUD=64
force_master_gain=10000
force_stick_force_enabled=1
force_stick_shaker_enabled=1
force_gear_bump_enabled=1
force_crash_enabled=1
force_ground_bumps_enabled=1
force_machinegun_enab led=1
[TextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
[TextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
WindDirectionAndSpeed=1,6
FrameRate=2,1
LockedFrameRate=2,2
GForce=2,3
FuelPercentage=2,4
[SlewTextInfo.1]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
[SlewTextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
[SlewTextInfo.3]
Latitude=1,1
Longitude=1,2
Altitude=1,3
Heading=1,4
AirSpeed=1,5
FrameRate=2,1
LockedFrameRate=2,2
[Avatar]
DefaultAvatar=Civilian Male White Shirt Blue Jeans
[DynamicHeadMovement]
LonAccelOnHeadLon=-0.020000
LonAccelOnHeadPitch=-0.010000
RollAccelOnHeadLat=0.010000
YawAccelOnHeadLat=-0.100000
RollAccelOnHeadRoll=0.100000
MaxHeadAngle=5.000000
MaxHeadOffset=0.300000
HeadMoveTimeConstant=1.000000
[VirtualCopilot]
VirtualCopilotActive=0
[FlightPlanMap]
LineWidth=2
[DISPLAY.Device.NVIDIA GeForce 840M.0.0]
Mode=1366x768x32
[USERINTERFACE]
SHOW_MISSION_CAPTIONS=1
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
SHOW_SCENARIO_WINDOW=1
RestoreTimeOnMove=0
Map_Orientation=0
MUTE_ON_LOST_FOCUS=1
[PointOfInterestSystem]
CycleSetting=1
[DEBUG]
ReportLoadErrors=0
[SOUND]
PrimaryPlaybackDevice={DEF00000-9C6D-47ED-AAF1-4DDA8F2B5C03}
VoicePlaybackDevice={DEF00002-9C6D-47ED-AAF1-4DDA8F2B5C03}
VoiceCaptureDevice={DEF00003-9C6D-47ED-AAF1-4DDA8F2B5C03}
SOUND=1
SOUND_QUALITY=2
SOUND_LOD=0
SOUND_FADER1=0.670000
SOUND_FADER2=0.470000
SOUND_FADER3=0.280000
SOUND_FADER4=0.500000
[TrafficManager]
AirlineDensity=0
GADensity=0
FreewayDensity=0
ShipsAndFerriesDensity=0
LeisureBoatsDensity=0
IFROnly=0
AIRPORT_SCENERY_DENSITY=0
[AContain]
ShowLabels=1
ShowUserLabel=0
ShowLabelManufacturer=1
ShowLabelModel=1
ShowLabelTailNumber=0
ShowLabelDistance=1
ShowLabelAltitude=1
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=0
ShowLabelFlightPlan=0
ShowLabelContainerId=0
ShowLabelAirspeed=0
ShowLabelHeading=0
LabelDelay=1000
LabelColor=FFFF0000
[BUFFERPOOLS]
UsePools=1
Poolsize=200000000
[TERRAIN]
SWAP_WAIT_TIMEOUT=30
LOD_RADIUS=3.500000
TESSELLATION_FACTOR=75
MESH_RESOLUTION=24
TEXTURE_RESOLUTION=28
AUTOGEN_VEGETATION_DENSITY=0
AUTOGEN_BUILDING_DENSITY=3
DETAIL_TEXTURE=1
WATER_REFLECT_CLOUDS=0
WATER_REFLECT_USERAIRCRAFT=0
WATER_REFLECT_SIMOBJECTS=0
WATER_REFLECT_TERRAIN=0
WATER_REFLECT_AUTOGEN_VEGETATION=0
WATER_REFLECT_AUTOGEN_BUILDINGS=0
WATER_REFRACT_CLOUDS=0
WATER_REFRACT_USERAIRCRAFT=0
WATER_REFRACT_SIMOBJECTS=0
WATER_REFRACT_TERRAIN=0
WATER_REFRACT_AUTOGEN_VEGETATION=0
WATER_REFRACT_AUTOGEN_BUILDINGS=0
ENABLE_BATHYMETRY=0
WATER_CLARITY=30
WATER_DETAIL=1
UseGlobalTerrainView=True
TERRAIN_MAX_AUTOGEN_TREES_PER_CELL=4500
TERRAIN_MAX_AUTOGEN_BUILDINGS_PER_CELL=3000
[ATC]
AutoOpenAirTrafficWindow=1
UsePilotVoice=1
ShowATCText=1
PilotVoice=0
COMM_MSG_AI_ATC_COLOR=0XFF8C00
COMM_MSG_ATC_AI_COLOR=0X00008B
COMM_MSG_ATC_USER_COLOR=0X006400
COMM_MSG_USER_ATC_COLOR=0XA52A2A
COMM_MSG_ATIS_COLOR=00000000
[INTERNATIONAL]
ASLAT=2
ASLON=1
MEASURE=0
[REALISM]
PFactor=1.000000
Torque=1.000000
GyroEffect=1.000000
CrashTolerance=1.000000
General=1.000000
UnlimitedFuel=False
AllowEngineDamage=True
TrueAirspeed=False
AutoCoord=False
RealMixture=True
StressDamage=True
GEffect=True
ManualLights=True
GyroDrift=False
CrashWithDyn=True
CrashDetection=False
OnCrashAction=0
[ATTACHMENTS]
WeaponHighlight=False
HighlightDuration=1.000000
AutoWeaponSwitching=False
UnlimitedWeapons=False
UnlimitedCountermeasures=False
IgnoreAttachmentWeight=True
IgnoreAttachmentForces=True
[RECORDER]
RecordAITraffic=True
RecordAirportVehicles=True
RecordLeisureBoats=True
[SIM]
SYSCLOCK=0
OPTIMIZE_PARTS=1
[STARTUP]
DEMO=0
STARTUP_DEMO=
LOAD_SCENARIO_TOOLS=1
LoadCorePlugins=1
LoadWindow=1
[FACILITIES]
COUNTRY=
STATE=
CITY=
GTL_BUTTON=4096
[MISC]
Com_Rate=7
[DISPLAY.Device.NVIDIA GeForce 840M.0.0]
Mode=1366x768x32
[MOUSE]
EnableGestures=False
[MULTIPLAYER]
condAccountPassword=0
 

 

DLL.XML

Quote

<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
  <Descr>Launch</Descr>
  <Filename>dll.xml</Filename>
  <Disabled>False</Disabled>
  <Launch.ManualLoad>False</Launch.ManualLoad>
  <Launch.Addon>
    <Name>FSUIPC 4</Name>
    <Disabled>False</Disabled>
    <Path>Modules\FSUIPC4.dll</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>Couatl</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>fsdreamteam\couatl\couatl.exe</Path>
  </Launch.Addon>
  <Launch.Addon>
    <Name>IvAp</Name>
    <Disabled>False</Disabled>
    <Path>C:\Program Files (x86)\IVAO\IvAp v2\ivap_fsx_bootstrap.dll</Path>
    <Commandline></Commandline>
  </Launch.Addon>
  <Launch.Addon>
    <Name>ObjectFlow_P3D</Name>
    <Disabled>False</Disabled>
    <ManualLoad>False</ManualLoad>
    <Path>C:\Program Files (x86)\Lockheed Martin\Prepar3D v3\ORBX\FTX_AU\FTXAA_ORBXLIBS\Scenery\ObjectFlow_P3D.dll</Path>
  </Launch.Addon>
</SimBase.Document>

 

EXE.XML

Quote

<?xml version="1.0" encoding="windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
    <Descr>Launch</Descr>
    <Filename>exe.xml</Filename>
    <Disabled>False</Disabled>
    <Launch.ManualLoad>False</Launch.ManualLoad>
    <Launch.Addon>
        <Name>IvAp</Name>
        <Disabled>False</Disabled>
        <Path>C:\Program Files (x86)\IVAO\IvAp v2\ivap_fsx_bootstrap.dll</Path>
        <Commandline></Commandline>
    </Launch.Addon>

</SimBase.Document>
 

 

I am using Logitech Extreme3D Pro

 

and finally CONTOLS

Quote

<?xml version="1.0" encoding="Windows-1252"?>

<SimBase.Document Type="Controls" version="3,2" id="Standard">
    <Descr>Controls Mapping File</Descr>
    <Filename>Standard.xml</Filename>
    <SimControls.Map>
        <Name>KEYBOARD_MAIN.Native</Name>
        <Entry>
            <Key>F</Key>
            <Down>DME</Down>
        </Entry>
        <Entry>
            <Key>G</Key>
            <Down>GEAR_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>I</Key>
            <Down>SMOKE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>F4</Key>
            <Down>THROTTLE_FULL</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+H</Key>
            <Down>PITOT_HEAT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>T</Key>
            <Down>XPNDR</Down>
        </Entry>
        <Entry>
            <Key>Z</Key>
            <Down>AP_MASTER</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_PERIOD</Key>
            <Down>ROTOR_CLUTCH_SWITCH_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>E</Key>
            <Down>ENGINE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+U</Key>
            <Down>TOGGLE_LAUNCH_BAR_SWITCH</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+A</Key>
            <Down>ADF</Down>
        </Entry>
        <Entry>
            <Key>F8</Key>
            <Down>FLAPS_DOWN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+5</Key>
            <Down>RADIO_ADF_IDENT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>D</Key>
            <Down>HEADING_GYRO_SET</Down>
        </Entry>
        <Entry>
            <Key>F1</Key>
            <Down>THROTTLE_CUT</Down>
        </Entry>
        <Entry>
            <Key>H</Key>
            <Down>ANTI_ICE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>F2</Key>
            <Down>THROTTLE_DECR</Down>
        </Entry>
        <Entry>
            <Key>M</Key>
            <Down>MAGNETO</Down>
        </Entry>
        <Entry>
            <Key>CTRL+2</Key>
            <Down>RADIO_VOR2_IDENT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>Num_8</Key>
            <Down>ELEV_DOWN</Down>
        </Entry>
        <Entry>
            <Key>L</Key>
            <Down>ALL_LIGHTS_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Num_4</Key>
            <Down>LANDING_LIGHT_LEFT</Down>
        </Entry>
        <Entry>
            <Key>X</Key>
            <Down>FREQUENCY_SWAP</Down>
        </Entry>
        <Entry>
            <Key>C</Key>
            <Down>COM_RADIO</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+V</Key>
            <Down>VOR_OBS</Down>
        </Entry>
        <Entry>
            <Key>B</Key>
            <Down>BAROMETRIC</Down>
        </Entry>
        <Entry>
            <Key>N</Key>
            <Down>NAV_RADIO</Down>
        </Entry>
        <Entry>
            <Key>VK_PERIOD</Key>
            <Down>BRAKES</Down>
        </Entry>
        <Entry>
            <Key>Num_2</Key>
            <Down>ELEV_UP</Down>
        </Entry>
        <Entry>
            <Key>VK_SLASH</Key>
            <Down>SPOILERS_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>F5</Key>
            <Down>FLAPS_UP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+E</Key>
            <Down>TOGGLE_AIRCRAFT_EXIT</Down>
        </Entry>
        <Entry>
            <Key>Num_1</Key>
            <Down>ELEV_TRIM_UP</Down>
        </Entry>
        <Entry>
            <Key>F3</Key>
            <Down>THROTTLE_INCR_SMALL</Down>
        </Entry>
        <Entry>
            <Key>Num_6</Key>
            <Down>AILERONS_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>Num_7</Key>
            <Down>ELEV_TRIM_DN</Down>
        </Entry>
        <Entry>
            <Key>Num_9</Key>
            <Down>INCREASE_THROTTLE</Down>
        </Entry>
        <Entry>
            <Key>Num_4</Key>
            <Down>AILERONS_LEFT</Down>
        </Entry>
        <Entry>
            <Key>Num_5</Key>
            <Down>CENTER_AILER_RUDDER</Down>
        </Entry>
        <Entry>
            <Key>Num_3</Key>
            <Down>DECREASE_THROTTLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+M</Key>
            <Down>AP_MACH_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+G</Key>
            <Down>AUTO_THROTTLE_TO_GA</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_PERIOD</Key>
            <Down>PARKING_BRAKES</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+P</Key>
            <Down>TOGGLE_PUSHBACK</Down>
        </Entry>
        <Entry>
            <Key>Num_0</Key>
            <Down>RUDDER_LEFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+V</Key>
            <Down>AP_WING_LEVELER</Down>
        </Entry>
        <Entry>
            <Key>F24</Key>
            <Down>RUDDER_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>VK_MULTIPLY</Key>
            <Down>BRAKES_LEFT</Down>
        </Entry>
        <Entry>
            <Key>VK_SUBTRACT</Key>
            <Down>BRAKES_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+T</Key>
            <Down>AP_ATT_HOLD</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+C</Key>
            <Down>NITROUS_TANK_VALVE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+O</Key>
            <Down>AP_LOC_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+A</Key>
            <Down>AP_APR_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+H</Key>
            <Down>AP_HDG_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Z</Key>
            <Down>AP_ALT_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+B</Key>
            <Down>AP_BC_HOLD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+N</Key>
            <Down>AP_NAV1_HOLD</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+L</Key>
            <Down>PANEL_LIGHTS_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+L</Key>
            <Down>LANDING_LIGHTS_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_0</Key>
            <Down>RUDDER_TRIM_LEFT</Down>
        </Entry>
        <Entry>
            <Key>F7</Key>
            <Down>FLAPS_INCR</Down>
        </Entry>
        <Entry>
            <Key>F6</Key>
            <Down>FLAPS_DECR</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F24</Key>
            <Down>RUDDER_TRIM_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F4</Key>
            <Down>PROP_PITCH_LO</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F3</Key>
            <Down>PROP_PITCH_INCR_SMALL</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F2</Key>
            <Down>PROP_PITCH_DECR</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F1</Key>
            <Down>PROP_PITCH_HI</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F4</Key>
            <Down>MIXTURE_RICH</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F3</Key>
            <Down>MIXTURE_INCR_SMALL</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F2</Key>
            <Down>MIXTURE_DECR</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F1</Key>
            <Down>MIXTURE_LEAN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+D</Key>
            <Down>YAW_DAMPER_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+R</Key>
            <Down>AP_AIRSPEED_HOLD</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+R</Key>
            <Down>AUTO_THROTTLE_ARM</Down>
        </Entry>
        <Entry>
            <Key>CTRL+1</Key>
            <Down>RADIO_VOR1_IDENT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+4</Key>
            <Down>RADIO_DME1_IDENT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+F4</Key>
            <Down>TOGGLE_AFTERBURNER</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Num_6</Key>
            <Down>LANDING_LIGHT_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+G</Key>
            <Down>GEAR_PUMP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_SLASH</Key>
            <Down>SPOILERS_ARM_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Num_8</Key>
            <Down>LANDING_LIGHT_UP</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Num_2</Key>
            <Down>LANDING_LIGHT_DOWN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Num_5</Key>
            <Down>LANDING_LIGHT_HOME</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+D</Key>
            <Down>RELEASE_DROPPABLE_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F9</Key>
            <Down>BUOYANCY_CENTER</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F5</Key>
            <Down>BUOYANCY_MIN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F</Key>
            <Down>TOGGLE_FLIGHT_DIRECTOR</Down>
        </Entry>
        <Entry>
            <Key>CTRL+E</Key>
            <Down>ENGINE_AUTO_START</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+V</Key>
            <Down>INC_COWL_FLAPS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+C</Key>
            <Down>DEC_COWL_FLAPS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_4</Key>
            <Down>AILERON_TRIM_LEFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_6</Key>
            <Down>AILERON_TRIM_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>J</Key>
            <Down>HOIST_SWITCH_EXTEND</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+M</Key>
            <Down>TOGGLE_MASTER_BATTERY_ALTERNATOR</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+B</Key>
            <Down>ROTOR_BRAKE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+U</Key>
            <Down>AUTORUDDER_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Q</Key>
            <Down>TOGGLE_TAIL_HOOK_HANDLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+3</Key>
            <Down>MARKER_SOUND_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+W</Key>
            <Down>TOGGLE_WATER_RUDDER</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+H</Key>
            <Down>HEADING_BUG_SELECT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Z</Key>
            <Down>ALTITUDE_BUG_SELECT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+R</Key>
            <Down>AIRSPEED_BUG_SELECT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_COMMA</Key>
            <Down>ROTOR_GOV_SWITCH_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+G</Key>
            <Down>TOGGLE_TAILWHEEL_LOCK</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+X</Key>
            <Down>ANTIDETONATION_TANK_VALVE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+D</Key>
            <Down>FUEL_DUMP_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Y</Key>
            <Down>TOW_PLANE_RELEASE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Y</Key>
            <Down>TOW_PLANE_REQUEST</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F6</Key>
            <Down>BUOYANCY_DEC</Down>
        </Entry>
        <Entry>
            <Key>O</Key>
            <Down>SLING_PICKUP_RELEASE</Down>
        </Entry>
        <Entry>
            <Key>K</Key>
            <Down>HOIST_SWITCH_RETRACT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+U</Key>
            <Down>HOIST_DEPLOY_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+I</Key>
            <Down>TAKEOFF_ASSIST_ARM_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Space</Key>
            <Down>TAKEOFF_ASSIST_FIRE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F7</Key>
            <Down>BUOYANCY_INC</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F8</Key>
            <Down>BUOYANCY_MAX</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>KEYBOARD_MAIN.Civilian Male White Shirt Blue Jeans</Name>
        <Entry>
            <Key>W</Key>
            <Down>Avatar - Move Forward (down)</Down>
            <Up>Avatar - Move Forward (up)</Up>
        </Entry>
        <Entry>
            <Key>D</Key>
            <Down>Avatar - Move Right (down)</Down>
            <Up>Avatar - Move Right (up)</Up>
        </Entry>
        <Entry>
            <Key>Q</Key>
            <Down>Avatar - Turn/Pan Left (down)</Down>
            <Up>Avatar - Turn/Pan Left (up)</Up>
        </Entry>
        <Entry>
            <Key>E</Key>
            <Down>Avatar - Turn/Pan Right (down)</Down>
            <Up>Avatar - Turn/Pan Right (up)</Up>
        </Entry>
        <Entry>
            <Key>R</Key>
            <Down>Avatar - Toggle Run</Down>
        </Entry>
        <Entry>
            <Key>F</Key>
            <Down>Avatar - Jump</Down>
        </Entry>
        <Entry>
            <Key>C</Key>
            <Down>Avatar - Toggle Crouch</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>KEYBOARD_MAIN</Name>
        <Entry>
            <Key>U</Key>
            <Down>POINT_OF_INTEREST_TOGGLE_POINTER</Down>
        </Entry>
        <Entry>
            <Key>1</Key>
            <Down>SELECT_1</Down>
        </Entry>
        <Entry>
            <Key>2</Key>
            <Down>SELECT_2</Down>
        </Entry>
        <Entry>
            <Key>R</Key>
            <Down>SIM_RATE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_SLASH</Key>
            <Down>INVOKE_HELP</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+VK_SLASH</Key>
            <Down>INVOKE_HELP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_1</Key>
            <Down>VIEW_REAR_LEFT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_2+Num_4</Key>
            <Down>VIEW_REAR_LEFT</Down>
            <Up>VIEW_REAR_LEFT</Up>
        </Entry>
        <Entry>
            <Key>VK_SCROLL</Key>
            <Down>ATC</Down>
        </Entry>
        <Entry>
            <Key>VK_TILDE</Key>
            <Down>ATC</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Y</Key>
            <Down>MOUSE_AS_YOKE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+A</Key>
            <Down>PREV_SUB_VIEW</Down>
        </Entry>
        <Entry>
            <Key>F11</Key>
            <Down>VIEW_CAMERA_SELECT_3</Down>
        </Entry>
        <Entry>
            <Key>3</Key>
            <Down>SELECT_3</Down>
        </Entry>
        <Entry>
            <Key>4</Key>
            <Down>SELECT_4</Down>
        </Entry>
        <Entry>
            <Key>VK_MINUS</Key>
            <Down>MINUS</Down>
        </Entry>
        <Entry>
            <Key>VK_PLUS</Key>
            <Down>PLUS</Down>
        </Entry>
        <Entry>
            <Key>VK_QUOTE</Key>
            <Down>VIEW_WINDOW_TO_FRONT</Down>
        </Entry>
        <Entry>
            <Key>Backspace</Key>
            <Down>ZOOM_1X</Down>
        </Entry>
        <Entry>
            <Key>CTRL+K</Key>
            <Down>JOYSTICK_CALIBRATE</Down>
        </Entry>
        <Entry>
            <Key>Q</Key>
            <Down>SOUND_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>Y</Key>
            <Down>SLEW_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_9</Key>
            <Down>VIEW_FORWARD_RIGHT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_6+Num_8</Key>
            <Down>VIEW_FORWARD_RIGHT</Down>
            <Up>VIEW_FORWARD_RIGHT</Up>
        </Entry>
        <Entry>
            <Key>VK_PAUSE</Key>
            <Down>PAUSE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>P</Key>
            <Down>PAUSE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>S</Key>
            <Down>VIEW_MODE</Down>
        </Entry>
        <Entry>
            <Key>VK_SEMICOLON</Key>
            <Down>SITUATION_SAVE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_2</Key>
            <Down>VIEW_REAR</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>CTRL+VK_SEMICOLON</Key>
            <Down>SITUATION_RESET</Down>
        </Entry>
        <Entry>
            <Key>VK_DIVIDE</Key>
            <Down>VIEW</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_MINUS</Key>
            <Down>VIEW_CHASE_DISTANCE_SUB</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+S</Key>
            <Down>VIEW_MODE_REV</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_Del</Key>
            <Down>PAN_RESET</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Q</Key>
            <Down>VIEW_ALWAYS_PAN_DOWN</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_8</Key>
            <Down>VIEW_FORWARD</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>CTRL+VK_PLUS</Key>
            <Down>VIEW_CHASE_DISTANCE_ADD</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_6</Key>
            <Down>VIEW_RIGHT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_7</Key>
            <Down>VIEW_FORWARD_LEFT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_4+Num_8</Key>
            <Down>VIEW_FORWARD_LEFT</Down>
            <Up>VIEW_FORWARD_LEFT</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_3</Key>
            <Down>VIEW_REAR_RIGHT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_2+Num_6</Key>
            <Down>VIEW_REAR_RIGHT</Down>
            <Up>VIEW_REAR_RIGHT</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_4</Key>
            <Down>VIEW_LEFT</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_5</Key>
            <Down>VIEW_DOWN</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+6</Key>
            <Down>FCS_PREVIOUS_TARGET</Down>
        </Entry>
        <Entry>
            <Key>CTRL+C</Key>
            <Down>EXIT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Scroll_Lock</Key>
            <Down>ABORT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Z</Key>
            <Down>READOUTS_FLIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+B</Key>
            <Down>WEAPON_STATION_NEXT</Down>
        </Entry>
        <Entry>
            <Key>Enter</Key>
            <Down>MP_ACTIVATE_CHAT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Space</Key>
            <Down>WEAPON_SYSTEM_FIRE_DOWN</Down>
            <Up>WEAPON_SYSTEM_FIRE_UP</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_MINUS</Key>
            <Down>MINUS_SHIFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Q</Key>
            <Down>VIEW_ALWAYS_PAN_UP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_PLUS</Key>
            <Down>PLUS_SHIFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_LBRACKET</Key>
            <Down>SCRIPT_EVENT_1</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_RBRACKET</Key>
            <Down>SCRIPT_EVENT_2</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_4+Num_5</Key>
            <Down>VIEW_LEFT_UP</Down>
            <Up>VIEW_LEFT_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+Enter</Key>
            <Down>EYEPOINT_BACK</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+9</Key>
            <Down>CENTER_NT361_CHECK</Down>
        </Entry>
        <Entry>
            <Key>VK_RBRACKET</Key>
            <Down>CLOSE_VIEW</Down>
        </Entry>
        <Entry>
            <Key>VK_LBRACKET</Key>
            <Down>NEW_VIEW</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+VK_RBRACKET</Key>
            <Down>NEW_MAP</Down>
        </Entry>
        <Entry>
            <Key>CTRL+X</Key>
            <Down>VIRTUAL_COPILOT_ACTION</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Tab</Key>
            <Down>NEXT_VIEW</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Tab</Key>
            <Down>PREV_VIEW</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+3</Key>
            <Down>PANEL_3</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+F10</Key>
            <Down>KNEEBOARD_VIEW</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+T</Key>
            <Down>MP_TRANSFER_CONTROL</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+O</Key>
            <Down>MP_PLAYER_CYCLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+F</Key>
            <Down>MP_PLAYER_FOLLOW</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+VK_RBRACKET</Key>
            <Down>MP_CHAT</Down>
        </Entry>
        <Entry>
            <Key>Caps_Lock</Key>
            <Down>MP_VOICE_CAPTURE_START</Down>
            <Up>MP_VOICE_CAPTURE_STOP</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Caps_Lock</Key>
            <Down>MP_BROADCAST_VOICE_CAPTURE_START</Down>
            <Up>MP_BROADCAST_VOICE_CAPTURE_STOP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+4</Key>
            <Down>COUNTERMEASURE_SYSTEM_STATION_NEXT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+P</Key>
            <Down>MP_PAUSE_SESSION</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+1</Key>
            <Down>PANEL_1</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+2</Key>
            <Down>PANEL_2</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+4</Key>
            <Down>PANEL_4</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+5</Key>
            <Down>PANEL_5</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+6</Key>
            <Down>PANEL_6</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+7</Key>
            <Down>PANEL_7</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+8</Key>
            <Down>PANEL_8</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+9</Key>
            <Down>PANEL_9</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_6+Num_5</Key>
            <Down>VIEW_RIGHT_UP</Down>
            <Up>VIEW_RIGHT_UP</Up>
        </Entry>
        <Entry>
            <Key>A</Key>
            <Down>NEXT_SUB_VIEW</Down>
        </Entry>
        <Entry>
            <Key>W</Key>
            <Down>PANEL_HUD_NEXT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+T</Key>
            <Down>VIEW_PANEL_ALPHA_SELECT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_1</Key>
            <Down>VIEW_REAR_LEFT_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_1+Num_5</Key>
            <Down>VIEW_REAR_LEFT_UP</Down>
            <Up>VIEW_REAR_LEFT_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+S</Key>
            <Down>WEAPON_SYSTEM_SAFETY_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_8</Key>
            <Down>VIEW_FORWARD_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_8+Num_5</Key>
            <Down>VIEW_FORWARD_UP</Down>
            <Up>VIEW_FORWARD_UP</Up>
        </Entry>
        <Entry>
            <Key>F12</Key>
            <Down>VIEW_CAMERA_SELECT_4</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+J</Key>
            <Down>WEAPON_SYSTEM_JETTISON</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+X</Key>
            <Down>VIRTUAL_COPILOT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Num_9</Key>
            <Down>VIEW_FORWARD_RIGHT_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_9+Num_5</Key>
            <Down>VIEW_FORWARD_RIGHT_UP</Down>
            <Up>VIEW_FORWARD_RIGHT_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+Num_3</Key>
            <Down>VIEW_REAR_RIGHT_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_3+Num_5</Key>
            <Down>VIEW_REAR_RIGHT_UP</Down>
            <Up>VIEW_REAR_RIGHT_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+Num_2</Key>
            <Down>VIEW_REAR_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_2+Num_5</Key>
            <Down>VIEW_REAR_UP</Down>
            <Up>VIEW_REAR_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+Num_7</Key>
            <Down>VIEW_FORWARD_LEFT_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_7+Num_5</Key>
            <Down>VIEW_FORWARD_LEFT_UP</Down>
            <Up>VIEW_FORWARD_LEFT_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+Num_5</Key>
            <Down>VIEW_UP</Down>
            <Up>VIEW_RESET</Up>
        </Entry>
        <Entry>
            <Key>CTRL+S</Key>
            <Down>VIEW_PREVIOUS_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+F</Key>
            <Down>REQUEST_FUEL_KEY</Down>
        </Entry>
        <Entry>
            <Key>F9</Key>
            <Down>VIEW_CAMERA_SELECT_1</Down>
        </Entry>
        <Entry>
            <Key>F10</Key>
            <Down>VIEW_CAMERA_SELECT_2</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_0</Key>
            <Down>SNAP_TO_PANEL</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+P</Key>
            <Down>POSITION_FREEZE_USER</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+L</Key>
            <Down>TOGGLE_AIRCRAFT_LABELS</Down>
        </Entry>
        <Entry>
            <Key>Esc</Key>
            <Down>USER_INTERRUPT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+W</Key>
            <Down>PANEL_HUD_PREVIOUS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+VK_TILDE</Key>
            <Down>SIMUI_WINDOW_HIDESHOW</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Enter</Key>
            <Down>EYEPOINT_UP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Backspace</Key>
            <Down>EYEPOINT_DOWN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Enter</Key>
            <Down>EYEPOINT_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Backspace</Key>
            <Down>EYEPOINT_LEFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Backspace</Key>
            <Down>EYEPOINT_FORWARD</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Space</Key>
            <Down>EYEPOINT_RESET</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+K</Key>
            <Down>POINT_OF_INTEREST_CYCLE_PREVIOUS</Down>
        </Entry>
        <Entry>
            <Key>V</Key>
            <Down>CAPTURE_SCREENSHOT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+1</Key>
            <Down>COUNTERMEASURE_SYSTEM_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+J</Key>
            <Down>TOGGLE_JETWAY</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+K</Key>
            <Down>GUN_SYSTEM_FIRE_DOWN</Down>
            <Up>GUN_SYSTEM_FIRE_UP</Up>
        </Entry>
        <Entry>
            <Key>Space</Key>
            <Down>MOUSE_LOOK_TOGGLE</Down>
            <DownVal>1</DownVal>
            <Up>MOUSE_LOOK_TOGGLE</Up>
            <UpVal>2</UpVal>
        </Entry>
        <Entry>
            <Key>SHIFT+O</Key>
            <Down>MOUSE_LOOK_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+I</Key>
            <Down>YAXIS_INVERT_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+E</Key>
            <Down>AVATAR MODE ATTACH TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+W</Key>
            <Down>WEAPON_SYSTEM_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+N</Key>
            <Down>WEAPON_NEXT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+VK_PERIOD</Key>
            <Down>WEAPON_RESET</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+7</Key>
            <Down>FCS_POPULATE_WITH_CLOSEST_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+8</Key>
            <Down>FCS_NEXT_TARGET</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+3</Key>
            <Down>COUNTERMEASURE_SYSTEM_STATION_PREV</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+2</Key>
            <Down>COUNTERMEASURE_SYSTEM_ARMED_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+5</Key>
            <Down>COUNTERMEASURE_SYSTEM_FIRE_DOWN</Down>
            <Up>COUNTERMEASURE_SYSTEM_FIRE_UP</Up>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+VK_SEMICOLON</Key>
            <Down>POSITION_FREEZE_ALL</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>KEYBOARD_SLEW</Name>
        <Entry>
            <Key>F8</Key>
            <Down>SLEW_PITCH_DN_FAST</Down>
        </Entry>
        <Entry>
            <Key>F2</Key>
            <Down>SLEW_ALTIT_FREEZE</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+X</Key>
            <Down>MOUSE_AS_YOKE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>Z</Key>
            <Down>SLEW_ALTIT_MINUS</Down>
        </Entry>
        <Entry>
            <Key>Y</Key>
            <Down>SLEW_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>P</Key>
            <Down>PAUSE_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>0</Key>
            <Down>SLEW_PITCH_MINUS</Down>
        </Entry>
        <Entry>
            <Key>F4</Key>
            <Down>SLEW_ALTIT_UP_FAST</Down>
        </Entry>
        <Entry>
            <Key>F3</Key>
            <Down>SLEW_ALTIT_UP_SLOW</Down>
        </Entry>
        <Entry>
            <Key>F1</Key>
            <Down>SLEW_ALTIT_DN_FAST</Down>
        </Entry>
        <Entry>
            <Key>Q</Key>
            <Down>SLEW_ALTIT_PLUS</Down>
        </Entry>
        <Entry>
            <Key>F7</Key>
            <Down>SLEW_PITCH_DN_SLOW</Down>
        </Entry>
        <Entry>
            <Key>F6</Key>
            <Down>SLEW_PITCH_FREEZE</Down>
        </Entry>
        <Entry>
            <Key>F5</Key>
            <Down>SLEW_PITCH_UP_FAST</Down>
        </Entry>
        <Entry>
            <Key>9</Key>
            <Down>SLEW_PITCH_PLUS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Space</Key>
            <Down>SLEW_RESET</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Z</Key>
            <Down>READOUTS_SLEW</Down>
        </Entry>
        <Entry>
            <Key>Num_7</Key>
            <Down>SLEW_BANK_MINUS</Down>
        </Entry>
        <Entry>
            <Key>Num_8</Key>
            <Down>SLEW_AHEAD_PLUS</Down>
        </Entry>
        <Entry>
            <Key>Num_9</Key>
            <Down>SLEW_BANK_PLUS</Down>
        </Entry>
        <Entry>
            <Key>Num_4</Key>
            <Down>SLEW_LEFT</Down>
        </Entry>
        <Entry>
            <Key>Num_5</Key>
            <Down>SLEW_FREEZE</Down>
        </Entry>
        <Entry>
            <Key>Num_6</Key>
            <Down>SLEW_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>Num_1</Key>
            <Down>SLEW_HEADING_MINUS</Down>
        </Entry>
        <Entry>
            <Key>Num_2</Key>
            <Down>SLEW_AHEAD_MINUS</Down>
        </Entry>
        <Entry>
            <Key>Num_3</Key>
            <Down>SLEW_HEADING_PLUS</Down>
        </Entry>
        <Entry>
            <Key>A</Key>
            <Down>NEXT_SUB_VIEW</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+L</Key>
            <Down>TOGGLE_AIRCRAFT_LABELS</Down>
        </Entry>
        <Entry>
            <Key>Esc</Key>
            <Down>USER_INTERRUPT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Enter</Key>
            <Down>EYEPOINT_UP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Backspace</Key>
            <Down>EYEPOINT_DOWN</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Enter</Key>
            <Down>EYEPOINT_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+Backspace</Key>
            <Down>EYEPOINT_LEFT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Backspace</Key>
            <Down>EYEPOINT_FORWARD</Down>
        </Entry>
        <Entry>
            <Key>Space</Key>
            <Down>MOUSE_LOOK_TOGGLE</Down>
            <DownVal>1</DownVal>
            <Up>MOUSE_LOOK_TOGGLE</Up>
            <UpVal>2</UpVal>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+D</Key>
            <Down>MOUSE_LOOK_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+I</Key>
            <Down>YAXIS_INVERT_TOGGLE</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>KEYBOARD_OBSERVE</Name>
        <Entry>
            <Key>VK_ADD</Key>
            <Down>OBSERVER_ZOOM_IN</Down>
        </Entry>
        <Entry>
            <Key>Space</Key>
            <Down>OBSERVER_MOUSE_LOOK_TOGGLE</Down>
            <DownVal>1</DownVal>
            <Up>OBSERVER_MOUSE_LOOK_TOGGLE</Up>
            <UpVal>2</UpVal>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_Del</Key>
            <Down>OBSERVER_RESET</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_4</Key>
            <Down>OBSERVER_YAW_LEFT</Down>
        </Entry>
        <Entry>
            <Key>Num_9</Key>
            <Down>OBSERVER_WORLD_MOVE_UP</Down>
        </Entry>
        <Entry>
            <Key>Num_2</Key>
            <Down>OBSERVER_WORLD_MOVE_BACK</Down>
        </Entry>
        <Entry>
            <Key>Num_6</Key>
            <Down>OBSERVER_WORLD_MOVE_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>Num_8</Key>
            <Down>OBSERVER_WORLD_MOVE_FORWARD</Down>
        </Entry>
        <Entry>
            <Key>Num_3</Key>
            <Down>OBSERVER_WORLD_MOVE_DOWN</Down>
        </Entry>
        <Entry>
            <Key>VK_SUBTRACT</Key>
            <Down>OBSERVER_ZOOM_OUT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_6</Key>
            <Down>OBSERVER_YAW_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_8</Key>
            <Down>OBSERVER_PITCH_UP</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_2</Key>
            <Down>OBSERVER_PITCH_DOWN</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_1</Key>
            <Down>OBSERVER_ROLL_LEFT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_3</Key>
            <Down>OBSERVER_ROLL_RIGHT</Down>
        </Entry>
        <Entry>
            <Key>SHIFT+Num_0</Key>
            <Down>OBSERVER_ROTATION_TOGGLE</Down>
        </Entry>
        <Entry>
            <Key>Num_4</Key>
            <Down>OBSERVER_WORLD_MOVE_LEFT</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>KEYBOARD_SIMDIRECTOR</Name>
        <Entry>
            <Key>F10</Key>
            <Down>SIMDIRECTOR_TOGGLE_BACKSTAGE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+E</Key>
            <Down>SIMDIRECTOR_EXPORT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+T</Key>
            <Down>SIMDIRECTOR_CENTER_ON_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>S</Key>
            <Down>SIMDIRECTOR_GIZMO_NONE</Down>
        </Entry>
        <Entry>
            <Key>F8</Key>
            <Down>SIMDIRECTOR_MISSION_PREVIEW_MODE</Down>
        </Entry>
        <Entry>
            <Key>F11</Key>
            <Down>SIMDIRECTOR_OPEN_SCENARIO_PROPERTIES</Down>
        </Entry>
        <Entry>
            <Key>4</Key>
            <Down>SIMDIRECTOR_CONTROLMODE_DRAW</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Enter</Key>
            <Down>SIMDIRECTOR_STAGING_COMMIT_ALL_CHANGES</Down>
        </Entry>
        <Entry>
            <Key>1</Key>
            <Down>SIMDIRECTOR_CONTROLMODE_NONE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+V</Key>
            <Down>SIMDIRECTOR_DUPLICATE_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F3</Key>
            <Down>SIMDIRECTOR_SELECT_PREVIOUS_SELECTED_OBJECT</Down>
        </Entry>
        <Entry>
            <Key>Esc</Key>
            <Down>SIMDIRECTOR_DESELECT_ALL_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>5</Key>
            <Down>SIMDIRECTOR_TOGGLE_STAGING_MODE</Down>
        </Entry>
        <Entry>
            <Key>W</Key>
            <Down>SIMDIRECTOR_GIZMO_TRANSLATE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+E</Key>
            <Down>SIMDIRECTOR_EXPORT_GROUP</Down>
        </Entry>
        <Entry>
            <Key>CTRL+O</Key>
            <Down>SIMDIRECTOR_OPEN_MISSION</Down>
        </Entry>
        <Entry>
            <Key>R</Key>
            <Down>SIMDIRECTOR_GIZMO_SCALE</Down>
        </Entry>
        <Entry>
            <Key>3</Key>
            <Down>SIMDIRECTOR_CONTROLMODE_MEASURE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Z</Key>
            <Down>SIMDIRECTOR_UNDO</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+1</Key>
            <Down>SIMDIRECTOR_TOGGLE_VISUALIZATION</Down>
        </Entry>
        <Entry>
            <Key>Num_Del</Key>
            <Down>SIMDIRECTOR_DELETE_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+G</Key>
            <Down>SIMDIRECTOR_GROUP_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+U</Key>
            <Down>SIMDIRECTOR_UNGROUP_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+N</Key>
            <Down>SIMDIRECTOR_NEW_SCENARIO</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+S</Key>
            <Down>SIMDIRECTOR_SAVE_MISSION_AS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+S</Key>
            <Down>SIMDIRECTOR_SAVE_MISSION</Down>
        </Entry>
        <Entry>
            <Key>CTRL+I</Key>
            <Down>SIMDIRECTOR_IMPORT</Down>
        </Entry>
        <Entry>
            <Key>E</Key>
            <Down>SIMDIRECTOR_GIZMO_ROTATE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+3</Key>
            <Down>SIMDIRECTOR_TOGGLE_OBJECT_PROPERTIES</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+4</Key>
            <Down>SIMDIRECTOR_TOGGLE_CATALOG</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+2</Key>
            <Down>SIMDIRECTOR_TOGGLE_OBJECTS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+6</Key>
            <Down>SIMDIRECTOR_TOGGLE_VALIDATION</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+7</Key>
            <Down>SIMDIRECTOR_TOGGLE_CATALOG_PREVIEW</Down>
        </Entry>
        <Entry>
            <Key>F6</Key>
            <Down>SIMDIRECTOR_VIRTUAL_INSTRUCTOR_MODE</Down>
        </Entry>
        <Entry>
            <Key>F7</Key>
            <Down>SIMDIRECTOR_FLIGHT_INSTRUCTOR_MODE</Down>
        </Entry>
        <Entry>
            <Key>F5</Key>
            <Down>SIMDIRECTOR_WORLD_EDITOR_MODE</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+V</Key>
            <Down>SIMDIRECTOR_VALIDATE_MISSION</Down>
        </Entry>
        <Entry>
            <Key>CTRL+F4</Key>
            <Down>SIMDIRECTOR_SELECT_NEXT_SELECTED_OBJECT</Down>
        </Entry>
        <Entry>
            <Key>F1</Key>
            <Down>SIMDIRECTOR_HELP</Down>
        </Entry>
        <Entry>
            <Key>F12</Key>
            <Down>SIMDIRECTOR_SETTINGS</Down>
        </Entry>
        <Entry>
            <Key>CTRL+SHIFT+5</Key>
            <Down>SIMDIRECTOR_TOGGLE_PREPAR3D</Down>
        </Entry>
        <Entry>
            <Key>VK_ADD</Key>
            <Down>SIMDIRECTOR_ZOOM_IN</Down>
        </Entry>
        <Entry>
            <Key>VK_SUBTRACT</Key>
            <Down>SIMDIRECTOR_ZOOM_OUT</Down>
        </Entry>
        <Entry>
            <Key>CTRL+Y</Key>
            <Down>SIMDIRECTOR_REDO</Down>
        </Entry>
        <Entry>
            <Key>2</Key>
            <Down>SIMDIRECTOR_CONTROLMODE_WAYPOINT</Down>
        </Entry>
        <Entry>
            <Key>F9</Key>
            <Down>SIMDIRECTOR_OPERATOR_MODE</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Yoke</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_AILERONS_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_ELEVATOR_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>BRAKES</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>SLEW_RESET</Down>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>FLAPS_INCR</Down>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>FLAPS_DECR</Down>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>THROTTLE_INCR</Down>
            <DownVal>1</DownVal>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>THROTTLE_DECR</Down>
            <DownVal>1</DownVal>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Yoke SLEW</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>SLEW_RESET</Down>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>SLEW_FREEZE</Down>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>SLEW_ALTIT_MINUS</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>SLEW_ALTIT_PLUS</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>SLEW_PITCH_DN_SLOW</Down>
            <Up>SLEW_FREEZE</Up>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>SLEW_PITCH_UP_SLOW</Down>
            <Up>SLEW_FREEZE</Up>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Yoke OBSERVE</Name>
        <Entry>
            <Index>6</Index>
            <Down>OBSERVER_ZOOM_IN</Down>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>OBSERVER_ZOOM_OUT</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Yoke SIMDIRECTOR</Name>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Look</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_PAN_HEADING</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_PAN_PITCH</AxEvent>
            <AxScale>-64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>VIEW_RESET</Down>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>EYEPOINT_RESET</Down>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>EYEPOINT_UP</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>EYEPOINT_DOWN</Down>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>ZOOM_OUT</Down>
            <DownVal>1</DownVal>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>ZOOM_IN</Down>
            <DownVal>1</DownVal>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Look SLEW</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_PAN_HEADING</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_PAN_PITCH</AxEvent>
            <AxScale>-64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>SLEW_RESET</Down>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>SLEW_FREEZE</Down>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>SLEW_ALTIT_MINUS</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>SLEW_ALTIT_PLUS</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>SLEW_PITCH_DN_SLOW</Down>
            <Up>SLEW_FREEZE</Up>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>SLEW_PITCH_UP_SLOW</Down>
            <Up>SLEW_FREEZE</Up>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Look OBSERVE</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_OBSERVER_YAW</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_OBSERVER_PITCH</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>6</Index>
            <Down>OBSERVER_ZOOM_IN</Down>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>OBSERVER_ZOOM_OUT</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Mouse Look SIMDIRECTOR</Name>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Logitech Extreme 3D {C215046D-0204-0000-0000-000000000000}</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_AILERONS_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_ELEVATOR_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>RzAxis</AxName>
            <Index>5</Index>
            <AxEvent>AXIS_RUDDER_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>Slider</AxName>
            <Index>6</Index>
            <AxEvent>AXIS_THROTTLE_SET</AxEvent>
            <AxScale>127</AxScale>
            <AxNull>1</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>BRAKES</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>1</Index>
            <Down>VIEW_MODE</Down>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>ELEV_TRIM_DN</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>ELEV_TRIM_UP</Down>
            <DownRpt>1</DownRpt>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>FLAPS_INCR</Down>
        </Entry>
        <Entry>
            <Index>5</Index>
            <Down>FLAPS_DECR</Down>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>RELEASE_DROPPABLE_OBJECTS</Down>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>GEAR_TOGGLE</Down>
        </Entry>
        <Entry>
            <Index>8</Index>
            <Down>VIEW_MODE</Down>
        </Entry>
        <Entry>
            <Index>9</Index>
            <Down>GEAR_TOGGLE</Down>
        </Entry>
        <POV>
            <Index>0</Index>
            <Down>PAN_VIEW</Down>
            <DownRpt>1</DownRpt>
        </POV>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Logitech Extreme 3D SLEW {C215046D-0204-0000-0000-000000000000}</Name>
        <Axis>
            <AxName>XAxis</AxName>
            <Index>0</Index>
            <AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>YAxis</AxName>
            <Index>1</Index>
            <AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Axis>
            <AxName>RzAxis</AxName>
            <Index>5</Index>
            <AxEvent>AXIS_SLEW_HEADING_SET</AxEvent>
            <AxScale>64</AxScale>
            <AxNull>36</AxNull>
        </Axis>
        <Entry>
            <Index>0</Index>
            <Down>SLEW_RESET</Down>
        </Entry>
        <Entry>
            <Index>1</Index>
            <Down>VIEW_MODE</Down>
        </Entry>
        <Entry>
            <Index>2</Index>
            <Down>SLEW_ALTIT_PLUS</Down>
        </Entry>
        <Entry>
            <Index>3</Index>
            <Down>SLEW_ALTIT_MINUS</Down>
        </Entry>
        <Entry>
            <Index>4</Index>
            <Down>SLEW_PITCH_PLUS</Down>
        </Entry>
        <Entry>
            <Index>5</Index>
            <Down>SLEW_PITCH_MINUS</Down>
        </Entry>
        <Entry>
            <Index>6</Index>
            <Down>SLEW_BANK_MINUS</Down>
        </Entry>
        <Entry>
            <Index>7</Index>
            <Down>SLEW_BANK_PLUS</Down>
        </Entry>
        <Entry>
            <Index>8</Index>
            <Down>SLEW_FREEZE</Down>
        </Entry>
        <Entry>
            <Index>9</Index>
            <Down>SLEW_RESET</Down>
        </Entry>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Logitech Extreme 3D OBSERVE {C215046D-0204-0000-0000-000000000000}</Name>
    </SimControls.Map>
    <SimControls.Map>
        <Name>Logitech Extreme 3D SIMDIRECTOR {C215046D-0204-0000-0000-000000000000}</Name>
    </SimControls.Map>
    <SimControls.Map>
        <Name>SETTINGS</Name>
        <Settings>
            <ControllersEnabled>True</ControllersEnabled>
            <Ailerons>64</Ailerons>
            <Elevator>64</Elevator>
            <Rudder>64</Rudder>
        </Settings>
    </SimControls.Map>
</SimBase.Document>
 

Please login to display this image.

Link to comment
Share on other sites

Well, it took a while, but I didn't see anything that should be causing the problem in the files you sent (I was hopeful the problem would present itself, as I've seen something similar occur).

 

Now it's time to look at  your SimConnect files, which I'm hopeful is the answer.  Please go to y our main P3D folder and open the "redist\\Interface" folder.  There you will find numerous versions of SimConnect.  Please open each sub-folder and install each version of simconnect.  This should resolve your issue.

 

Something which can help your avoid such problems In the future is to ensure that User Account Control is disabled and your Antivirus software is disabled for any Flight Simulation software installation (simulator, aircraft, scenery, etc.).

 

I hope this resolves the issue for you. Please let us know.

 

 

Link to comment
Share on other sites

7 hours ago, DaveCT2003 said:

Well, it took a while, but I didn't see anything that should be causing the problem in the files you sent (I was hopeful the problem would present itself, as I've seen something similar occur).

 

Now it's time to look at  your SimConnect files, which I'm hopeful is the answer.  Please go to y our main P3D folder and open the "redist\\Interface" folder.  There you will find numerous versions of SimConnect.  Please open each sub-folder and install each version of simconnect.  This should resolve your issue.

 

Something which can help your avoid such problems In the future is to ensure that User Account Control is disabled and your Antivirus software is disabled for any Flight Simulation software installation (simulator, aircraft, scenery, etc.).

 

I hope this resolves the issue for you. Please let us know.

 

 

 

 

I am really really sorry to announce it but it is not working.  Isn't it weird that those door can be opened in turnaround state but cannot be opened in cold and dark?  Is there any possible cfg or something like that to edit to make those doors opened as default as it is in turn around state? For instance " coldanddark.asc".. Also anyone who sends his personal. asc will be appreciated.

Link to comment
Share on other sites

If you have reinstalled the aircraft per the procedure I provided to you, the state has been reinstalled as well.  Did you do the reinstall?

 

You did not mention if you reinstalled the different versions of SimConnect.  Have you done that?

 

 

Link to comment
Share on other sites

Hi,

maybe I had a similar issue with the Aerosoft Airbus A320/A321 installed in Prepar3D v3.2. The thread is here in the German Forum. Post #8 shows the clou to my issue. After updating 'Orbx ObjectFlow_P3D.dll' to the latest rev everything is fine here :).

Regards Hans

Link to comment
Share on other sites

Thanks Hans.

 

Two other things to check.

 

1. Do the other states work fine?

 

2. Once the aircraft loads the Takeoff state, try re-selecting the Takeoff state and see if the doors close.  Then see if they reopen.

 

3. If you're running ORBX scenery, definitely try what Hans said.

 

 

Link to comment
Share on other sites

Yeah sir  I have done everything you told me to do(reinstalling, simconnects vs). Finally I will handle what Hans and you said when I get home. I will let you know. Thank you

Link to comment
Share on other sites

Thank you my friend, I'm sorry I had to ask but I really thought we'd get somewhere with SimConnect.

 

Something else I thought of.  When you are able, would you please open the redist\\Interface" folder and take a screen shot or tell me what's in there for you?  I just want to make sure you have all the pertinent versions of SimConnect there.

 

Link to comment
Share on other sites

1 hour ago, DaveCT2003 said:

Thank you my friend, I'm sorry I had to ask but I really thought we'd get somewhere with SimConnect.

 

Something else I thought of.  When you are able, would you please open the redist\\Interface" folder and take a screen shot or tell me what's in there for you?  I just want to make sure you have all the pertinent versions of SimConnect there.

 

No its okay :)

here are the files.

Please login to display this image.

here the installed ones

Please login to display this image.

Link to comment
Share on other sites

5 hours ago, HansW said:

Hi,

maybe I had a similar issue with the Aerosoft Airbus A320/A321 installed in Prepar3D v3.2. The thread is here in the German Forum. Post #8 shows the clou to my issue. After updating 'Orbx ObjectFlow_P3D.dll' to the latest rev everything is fine here :).

Regards Hans

Hans do you mean updating orbxlibs? if so, I updated it on 28th May 2016. if not , how would I update? or could you simply share your Orbx ObjectFlow_P3D.dll  with me ?

Thank You

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use